RadioLink

Sort By:  
RadioLink R6DS 6ch 2.4GHz FHSS Receiver (S-BUS+PPM) (1RL0040)
Radiolink R6DS 2.4GHz 6ch PPM/PWM/S-BUS Output Receiver

The R6DS is a small 6 channel S-BUS / PPM / PWM ready receiver from Radiolink with three signal outputs.
The R6DS can output both PWM and S.BUS output simultaneously.

PWM output: 6 channels totally
S.BUS output
PPM output: CH1 outputs PPM signal for 10 channels, and channel 2 to channel 6 output independent PWM signal simultaneously

All channels have a response time of 3 ms. Specially designed for small models and light drones
Compatible with most flight controllers such as DJI NAZA, ZERO TECH, PIX, APM, MINI APM, NAZE32, and CC3D, etc.,..
A single cable needed for flight controller connection. With its miniature size and a total weight of 3.9 grams, the R6DSD is a great choice for light models and drones.

Specification:
Brand Name: Radiolink
Item Name: R6DS
Band: 2.4G
Channel: 6 (Red LED indicator is for PWM mode. Blue LED for PPM, It can be extended to 10channels)
Power Input: 4.8 - 6V
Control Distance: 600m in air
Current Consumption: 38-45mA (Input voltage:5V)
Dimension: 25×16×11mm
Weight: 3.9g
Precision: 4096

Features:
DSSS&FHSS transmission.
Output SBUS, PPM and PWM signals simultaneously.
Top speed response, 3ms for all channels parallel.
Top precision 4096
Sub miniature size, totally weights 3.4 grams
All channels response parallel, totally 3ms.
One single cable connect with the flight controller, easy setting

Receiver Operation:
SBUS/PPM and PWM signal change

Short press the ID SET switch two times within 1 second, the signal is changed from normal PWM to SBUS/PPM. The red LED indicates the normal PWM and blue/purple indicates SBUS/PPM.

Installment of receiver antenna
The antenna must be kept as straight as possible. Otherwise it will reduce the effective range.
Large model aircraft may of some metal part interfering signal; in this case the antennas should be placed at both sides of the model. Then the best RF signal condition is obtained at any flying attitude.
The antennas must be kept away from conductive materials, such as metal and carbon by at least a half inch. The coaxial part of the antennas does not need to follow these guidelines, but do not bend it in a small radius.
Keep the antennas away from the motor, ESC, and other noise sources as much as possible.
Press and hold the Easy Link (ID SET) one second, now the receiver starts work.
After all of the above steps finished, the LED indicator will turn and keep in red.
The receiver can be packed by sponge or foam for shocking proof when it is installed to the model.

Package Includes:
1x Radiolink R6DS receiver

15.86€  Inc Tax
RadioLink T8FB (bluetooth) Remote Controller (FHSS) with R8EF 8ch receiver (1RL0030BT)
RadioLink T8FB (bluetooth) Remote Controller (FHSS) with R8EF 8ch receiver

2000 Meters Control Distance
T8FB(BT), with the same FHSS algorithm of AT9S Pro and 67 channels pseudo-random frequency sequence hopping, the chip TI CC2500(same as the Open TX Frsky X9D) and the transmission rate (which three times faster than Open TX), achieving the better anti-interference ability to both the same frequency band and different frequency bands. The control distance of T8FB is 2000 meters in air.

0.5us Gimbal Precision
The optimal design of the PCB layout ensures maximum PWM jitter of 1.84us with a standard of just 0.5us. It is 14 times better than regular jitter 7us of the mainstream 16-channel transmitter in the market. The same joysticks components as AT9S Pro.

USB Upgrade and APP Parameter Setup
Parameters can be easily set up and modified with Android or iOS mobile phone APP connected via Bluetooth.
Parameters also can be set up by computer tools connected via USB cable.
USB upgrades with new functions added and keeps T8FB(BT) always advanced.
Countless sets of model data can be stored.

Real-time Telemetry
Real-time model data feedback function allows users to receive the transmitter voltage and RSSI information.
When paired with receiver R8F or R7FG, the model voltage will display on the mobile phone APP.

Adapts to Multiple Models
Adaptable models include Fixed Wing, Glider, Multicopter, Car, Boat, and Robot.
Transmitter automatically switches layout depending on the selected mode.
The receiver with 21cm (8.27”) antenna is also perfect for easy RC boat control.

Programmable Mix Control
Channels five through eight can be programmed to any advanced setting
Flight modes are set with the two 3-way switches in the flight controller PIX by default.
Even beginners can enjoy T8FB without a manual.

Specifications
T8FB(BT) size: 173*102*206mm
R8EF size: 41.5*21.5*11.5mm
Weight (with R8EF): 0.47kg
Output Frequency: 2.4GHz ISM band(2400MHz~2483.5MHz)
Modulation Mode: GFSK
Channel Bandwidth: 400KHz
Channel Pacing: 1200KHz
Spread Spectrum: FHSS, 67 channels pseudo-random frequency hopping
Adjacent Channel Rejection: >36dBM
Transmitter Power: <100mW (20dBM)
Reception Sensitivity: -104dBM
Transmission Rate: 38kbps
PWM Output Range: 1.0ms~2.0ms
Section precision: 4096, 0.5us per section
Cycle: 15ms/per frame
T8FB(BT) operating voltage: 4.8V~18V
T8FB(BT) operating current: <80mA
R8EF operating voltage: 4.6~10V
R8EF operating current: <30mA

Compatible receivers: R8EF (Std), R8FM, R8SM, R8F, R7FG, R6FG, R6F, R4FGM, R4F


R8EF Receiver:
Channel: 8ch
Operating voltage: 4.8-10V
Operating current: 19-25mA (input voltage 5V)
Size: 48.5x21x11mm
Weight: 7g
Section precision: 4096
Signal output: S-BUS, PPM and PWM
Signal mode: Green LED, output 8 channel PWM signal
SBUS/PPM signal mode: Both red and green LED on, CH1 output S-BUS signal, CH2 output PPM signal, CH3 to CH8 output PWM signal (at the same time)

Package Including:
1x T8FB (bluetooth) 2.4G 8CH Remote Control System Transmitter
1x R8EF Receiver

59.78€  Inc Tax
Radiolink Trainer Cable (1RL0058)
Radiolink Trainer Cable


Use this accessory for radio controlled (RC) airplanes, helicopters and other models.

9.76€  Inc Tax
Radiolink AT10II Transmitter + R12DS 12-Channel Telemetry Receiver (1RL0020)
Radiolink R12DS 12-Channel Receiver 2.4GHz

AT10 II Includes 12-Channel Receiver and Telemetry Module!

Full Featured 2.4GHz Premium Transmitter with a Powerful Combination of Features and Capabilities
Ideal for Flying Virtually any Type of Aircraft- Fixed Wing, Rotary, Glider, Multirotor and Hybrids
Designed for the Experts, Easy Enough for Beginners
Configuraable Sound Alarms Signal Potential Probems
User-Friendly Design for Ease of Operation and Handling
Intuitive Interface, Real-Time Telemetry, Simple Menu with a Highly Visible Color Display
Excellent Transmitter for Recreation, Sport, Competition or 3D Flying

DSSS and FHSS Performance
RadioLink is the first RC equipment manufacturer to introduce DSSS and FHSS that operate side-by-side to help reduce overall signal interference
QPSK modulation helps ensure stable control
These features allow the AT10II to produce a highly constant and stable transmission signal present on all 12 channels

All-New Transmitter Antenna with 4KM Range
7dBi High Gain antenna
Lower signal noise with a channel Bandwidth of 5.0 MHz
RF power output is over 100mW for a stable response
The AT10II is an excellent choice for Professional Aerial, Agricultural and Industrial drones

Transmitter Quickly Adapts to All Types of Aircraft
Easy to understand user software makes quick work of changing aircraft types
Models
- Fixed Wing
- Rotary Wing
- Multirotor
- Glider (one aileron and one flap)
- Glider (two ailerons and one flap)
- Glider (two ailerons and two flaps)
- Hybrids

Multiple functionality for each model class with FIVE programmed flight characteristics for each model
Completely customizable switches (8), dials (3) and sliders (2).
Transmitter automatically switches layout depending on selected mode

Simulator Ready!
Transmitter includes a simulator interface feature for year-round fun
While in simulator mode the transmitter’s RF circuit turns off to save battery power
Transmitter uses the trainer port for communication with the simulator
Compatible with the majority of aircraft simulator software packages


Package Including:
1x AT10II Transmitter
1x R12DS Receiver
1x PRM-01 Voltage Telemetry Module
1x Manual

184.83€  Inc Tax
Radiolink PRM-01 Voltage Telemetry Module (1RL0054)
Radiolink PRM-01 Voltage Telemetry Module

Real-time Telemetry
Real-time model data feedback allows users to receive crucial information on the model's systems.
When paired with flight module PRM-01, model voltage is displayed.
Configurable sound/message/vibration alarms signal potential problems when low model voltage. A low model voltage alarm value can be customized.

Real-time Model Voltage Telemetry Module
Model: PRM-01
Dimensions: 33 x 22 x 11mm
Weight (with wire): 7g
Voltage Input Range: 1S - 6S LiPo Battery
Compatible receiver: R12DS, R9DS (Old version receiver: R10DS, R10D, R9D)
Compatible transmitter: AT10II/AT10/AT9S Pro/AT9S/AT9
Configurable sound/message/vibration alarms signal for low voltage (customizable).

Package Including:
1x Real-time Model Voltage Telemetry Module PRM-01

18.30€  Inc Tax
Radiolink R12DS 12-Channel Telemetry Receiver (1RL0050)
Radiolink R12DS 12-Channel Receiver 2.4GHz

Use for Radiolink transmitters AT9, AT9S, AT9S Pro, AT10 and AT10II.

4000 Meters Control Distance
DSSS and FHSS hybrid spread spectrum, 16 channels pseudo-random frequency hopping, and QPSK modulation ensures excellent anti-interference performance, highly constant, and stable transmission signal present on all 12 channels of R12DS.
4KM Range enables all possible RC fun.
The maximum PWM jitter is 1.84us with a standard of just 0.5us.

R12DS Receiver:
Channels:
- 11 channels for PWM signal output
- 12 channels for SBUS&PWM signal output.
Working voltage: 4.8-10V
Working current: 38-45mA(input voltage: 5V)
Size: 50 x 32 x 14.5mm
Weight: 14g
4096 section precision, 0.25us per section, servo anti-shake rudder.
Control distance: approx. 4000m in the air.

Receiver integrate telemetry sensor including signal strength and voltage. Support extended engine voltage telemetry module PRM-01 and module PRM-02 can feedback GPS info, Speed, voltage etc. on AT9/AT9S/AT9S Pro/AT10/AT10II display when work with flight controller APM or PIX.

Package Including:
1x R12DS Receiver

34.22€  Inc Tax
Radiolink R9DS 9-Channel Telemetry Receiver (1RL0048)
Radiolink R9DS 9(10)-Channel Receiver 2.4GHz

Use for Radiolink transmitters AT9, AT9S, AT10 and AT10II.

3400 Meters Control Distance
DSSS and FHSS hybrid spread spectrum, 16 channels pseudo-random frequency hopping, and QPSK modulation ensures excellent anti-interference performance, highly constant, and stable transmission signal present on all 10 channels of R9DS.
3400m range enables all possible RC fun.
Maximum PWM jitter is 1.84us with a standard of just 0.5us.

R9DS Receiver:
Channels:
- 9 channels: output 9 channels PWM signal, with red LED.
- 10 channels: output 10 channels signal, support SBUS and PWM signal output synchronously, with blue LED.
Working voltage: 4.8-10V
Working current: 38-45mA(input voltage: 5V)
Size: 43*24*15mm
Weight: 9g
4096 section precision, 0.25us per section, servo anti-shake rudder.

Receiver integrate telemetry sensor including signal strength and voltage. Support extended engine voltage telemetry module PRM-01 and module PRM-02 can feedback GPS information, Speed, voltage etc. on AT9/AT9S/AT10/AT10II display when work with flight controller APM or PIX.

Package Including:
1x R9DS Receiver

28.06€  Inc Tax
Radiolink R6F 6-Channel Receiver (car/boat) (1RL0062)
Radiolink R6F 6-Channel Receiver 2.4GHz

R6F Receiver:
Frequency: 2.4GHz ISM band (2400MHz-2483.5MHz)
Size: 35 x 20 x13mm
Weight: 6g
Channel: 6 channels
Model: cars/boats
Spread spectrum: FHSS
Antenna length: 200mm
Control distance: more than 400 meters
Power supply: 4.8 - 10.0V DC
Channel resolution: 4096
Work current: 30mA
Compatible with transmitters: RC6GS, RC4GS, RC4G, RC3S,

Package Including:
1x R6F Receiver

15.86€  Inc Tax
Radiolink R8FM 8-Channel MINI Receiver 2.4GHz (SBUS and PPM) (1RL0044)
Radiolink R8FM 8-Channel MINI Receiver 2.4GHz

Radiolink R8FM, 2.4G 8 channel receiver support SBUS and PPM signal
Good choice for use with Radiolink T8FB transmitter in a racing drone.

2000 Meters Control Distance
67-channel pseudo-random frequency hopping help reduce overall signal interference.
2000 meters range enables all possible RC fun.
The maximum PWM jitter is 1.84us with a standard of just 0.5us.

SBUS or PPM Signal Output
8 channels of SBUS/PPM signal output.
Compatible with PIXHWAK, MINI PIX, TURBO PIX, and APM flight controllers which support SBUS or PPM signal.
Weight of 2.5g and small size of 16.0 x 21.5 x 1.0mm make R8FM is tiny enough even for mini racing drone and glider

R8EF Receiver:
Channel: 8ch
Operating voltage: 3 - 6V
Operating current: 38-45mA (input voltage 5V)
Size: 48.5x21x11mm
Weight: 2.5g
Section precision: 4096, 0.25us per section
Signal output: SBUS, PPM
Control distance: 2000 meters in the air
Compatible transmitter: T8S /T8FB/ RC6GS V2/ RC4GS V2/ RC6GS/ RC4GS

Package Including:
1x R8FM Receiver

17.69€  Inc Tax
RadioLink R8EF 8ch 2.4GHz FHSS Receiver (S-BUS+PPM) (1RL0046)
RadioLink R8EF 8ch 2.4GHz FHSS Receiver

R8EF Receiver:
Channel: 8ch
Operating voltage: 4.9-10V
Operating current: 19-25mA (input voltage 5V)
Size: 48.5x21x11mm
Weight: 7g
Feature: Fail-safe
Section precision: 4096
Signal output: S-BUS, PPM and PWM
Signal mode: Green LED, output 8 channel PWM signal
SBUS/PPM signal mode: Both red and green LED on, CH1 output S-BUS signal, CH2 output PPM signal, CH3 to CH8 output PWM signal (at the same time)

Package Including:
1x R8EF Receiver

18.91€  Inc Tax
Per Page      1 - 10 of 10
  • 1