Engine Accessories
Kyosho Air Filter Set for KE15SP Engine (K.74033-13)
Kyosho Air Filter Set for KE15SP Engine
Air Cleaner Set for .15 engines
Air Cleaner Set for .15 engines
Kyosho Air Filter Sponge Set for KE15SP Engine (3 pieces) (K.74033-13-1)
Kyosho Air Filter Sponge Set for KE15SP Engine
Air Cleaner Sponge for .15 engines (3 pieces)
Air Cleaner Sponge for .15 engines (3 pieces)
Kyosho HD Air Cleaner Sponge Set (2 pieces) (K.92304-1)
Kyosho Air Filter Sponge Set for .21 and .25 engines
HD Air Cleaner Sponge Set (2 pieces)
HD Air Cleaner Sponge Set (2 pieces)
Graupner OILIT Gasket Sheet Sealing Material (796)
Graupner OILIT Gasket Sheet / Sealing Material
Thicknes: 0.5mm
Heat resistance: min. 400C
Sheet size: 150x105mm
Ideal material for trimming custom engine exhaust gaskets.
Thicknes: 0.5mm
Heat resistance: min. 400C
Sheet size: 150x105mm
Ideal material for trimming custom engine exhaust gaskets.
Stone Fuel Filter (with clip) (R07120B)
Stone Fuel Filter
Sintered Fuel Filter with attachment clip.
Dimensions:
ø 13 mm x length 52 mm
Sintered Fuel Filter with attachment clip.
Dimensions:
ø 13 mm x length 52 mm
HT Rear In Line Pipe Set for 1/8 OFF-ROAD car (polished / .21) (HT-230660)
Hobby Tech Rear In Line Pipe Set
Suitable for 1/8 off-road cars
Fit most .21 (3.5cc) nitro engines
Polished finish
Package:
The set includes pipe, header, three short pipe springs, one manifold spring and two manifold gaskets.
Use this exhaust pipe set for radio controlled (RC) offroad car, buggy or truck models.
Suitable for 1/8 off-road cars
Fit most .21 (3.5cc) nitro engines
Polished finish
Package:
The set includes pipe, header, three short pipe springs, one manifold spring and two manifold gaskets.
Use this exhaust pipe set for radio controlled (RC) offroad car, buggy or truck models.
REDS Racing V3.0 Tetra Aluminum Clutch - 32mm (without bell) (REDMUQU0063)
REDS Racing V3.0 Tetra Aluminum Clutch - 32mm (without bell)
Fully Adjustable
REDS new clutch system comes with 3 preload adjustments on the front plate to fit any type of ground and engine output. You can change the spring preload on the front plate from H to M and to L (High, Medium and Low position). The 1.1mm spring was introduced (available as an optional part) to further increase the number of setup combinations to best suit your driving style and track conditions.
The new clutch system features a new dust-proof flywheel which has been improved compared to its previous version to protect the engine front bearing from dirt even on high-dust conditions.
The new 7075 Aluminum and Carbon clutch shoes have been redesigned to increase wear resistance. In addition, the new shoes are lighter to allow and engage at higher revs and lower inertia to rotation. V3.0 Clutch System comes with 4 alu shoes and 1.0 mm springs. Other parts are available as an upgrade.
2 different models of the V3.0 Clutch has been developed and both are available with 32mm and 34mm diameter to make it suitable for different car models.
Aluminum Clutch: medium inertia, good on all type of track layouts.
Steel Clutch: high inertia, recommended for low grip tracks.
Suitable for any type of car (Off-Road Buggy and Truggy)
32 mm for Kyosho, JQ, Team Associated, Hot Bodies, Serpent, Xray.
34 mm for Sworkz, Mugen, Team Losi, Agama, Tekno.
The original REDS bell can be used with all types of cars named above.
Fully Adjustable
REDS new clutch system comes with 3 preload adjustments on the front plate to fit any type of ground and engine output. You can change the spring preload on the front plate from H to M and to L (High, Medium and Low position). The 1.1mm spring was introduced (available as an optional part) to further increase the number of setup combinations to best suit your driving style and track conditions.
The new clutch system features a new dust-proof flywheel which has been improved compared to its previous version to protect the engine front bearing from dirt even on high-dust conditions.
The new 7075 Aluminum and Carbon clutch shoes have been redesigned to increase wear resistance. In addition, the new shoes are lighter to allow and engage at higher revs and lower inertia to rotation. V3.0 Clutch System comes with 4 alu shoes and 1.0 mm springs. Other parts are available as an upgrade.
2 different models of the V3.0 Clutch has been developed and both are available with 32mm and 34mm diameter to make it suitable for different car models.
Aluminum Clutch: medium inertia, good on all type of track layouts.
Steel Clutch: high inertia, recommended for low grip tracks.
Suitable for any type of car (Off-Road Buggy and Truggy)
32 mm for Kyosho, JQ, Team Associated, Hot Bodies, Serpent, Xray.
34 mm for Sworkz, Mugen, Team Losi, Agama, Tekno.
The original REDS bell can be used with all types of cars named above.
Graupner Fuel Line Clamp 4mm (3 pcs.) (1123.4)
Graupner Fuel Line Clamp
Size: 4mm (3 pcs.)
Use with Neoprene/Silicone or Tygon fuel line/hose for radio controlled model engines.
Size: 4mm (3 pcs.)
Use with Neoprene/Silicone or Tygon fuel line/hose for radio controlled model engines.
Kyosho Muffler Gasket for .21/.28 (round type) (K.97045)
Kyosho Muffler Gasket for .21/.28 (round type)
Package: 5 pieces
Use for radio controlled (RC) offroad/onroad car models
Package: 5 pieces
Use for radio controlled (RC) offroad/onroad car models
Air Filter Dust Cover - Dirtbag (2 pcs) (R07112)
Robitronic Air Filter Cover - Dirtbag
Suitable for air filter dimensions:
Circumference: 42 - 60mm
Max. Length: 55mm
Package:
2x dust covers
2x zip ties
Use as a dust cover for internal combustion engines on 1/8 radio controlled cars and buggies (trucks and truggies)
Suitable for air filter dimensions:
Circumference: 42 - 60mm
Max. Length: 55mm
Package:
2x dust covers
2x zip ties
Use as a dust cover for internal combustion engines on 1/8 radio controlled cars and buggies (trucks and truggies)
Kavan Aluminum Fuel Line Plug (2 pcs) (KAV0289)
Kavan Aluminum Fuel Line Plugs.
Package: 2 pieces / d=4.10mm
Use for radio controlled (RC) airplanes, helicopters, boats and other models.
Package: 2 pieces / d=4.10mm
Use for radio controlled (RC) airplanes, helicopters, boats and other models.
Stone Fuel Filter - For fuel line dia. 3mm (HY005-01501)
Stone Fuel Filter
Fuel Filter for use with both petrol and glow fuel.
Dimensions:
ø 13 mm x length 52 mm
Fuel in/outlet ø 5.2mm
Use for radio controlled (RC) airplanes, helicopters, cars, trucks, buggies, boats and other models.
Fuel Filter for use with both petrol and glow fuel.
Dimensions:
ø 13 mm x length 52 mm
Fuel in/outlet ø 5.2mm
Use for radio controlled (RC) airplanes, helicopters, cars, trucks, buggies, boats and other models.
Graupner Silicone Fuel Line 1m (5/2mm) - red/yellow/green (1641)
Graupner Silicone Fuel Tubing - red, yellow or green
Size: 5mm outer and 2mm inner diameter
Length: 1m
Silicone fuel line/hose for radio controlled model engines. Use for glow fuel.
Size: 5mm outer and 2mm inner diameter
Length: 1m
Silicone fuel line/hose for radio controlled model engines. Use for glow fuel.
Kyosho K4 Glow Plug (K.74491)
Kyosho K4 Glow Plug
For internal combustion model engines. Only the highest quality materials are used in the production of these glow plugs.
For winter season - use with 10 - 25% nitro
Use for radio controlled (RC) cars, buggies, trucks and other models.
For internal combustion model engines. Only the highest quality materials are used in the production of these glow plugs.
For winter season - use with 10 - 25% nitro
Use for radio controlled (RC) cars, buggies, trucks and other models.
- 1