RC Electronics

Sort By:  
Graupner ULTRA 2806 2300KV Brushless Motor CW (S7049)
Graupner ULTRA Race copter MOTOR 2300kv CW

Specification:
Operating Voltage Range: 7.4-11.1V (2-3S)
Number of poles: 14
Shaft Diameter: 5mm
Case Diameter: 28mm
Case Length: 18.7mm
Kv (RPM/V): 2300
Weight (inc. spinner and 2mm connectors): 33.5g

9.76€  Inc Tax
SkyRC XT60 Charging Cable for 2S Battery (4mm and 5mm) (SK600023-14)
SkyRC XT60 Charging Cable for 2S Lipo Battery (4mm and 5mm)

4 and 5mm gold connectors

6.10€  Inc Tax
Graupner ON/OFF Switch with leads (3934.1)
Graupner ON/OFF Switch with leads

3.66€  Inc Tax
Graupner Servo Lead Extension (cable) 200mm (S8170)
Graupner Servo Lead Extension (cable) 200mm

With JR connector (0.3mm2 cable)

1.83€  Inc Tax
Y-lead Servo Cable 150mm (8GR3080)
Flat Y-lead servo extension cable (150mm)

Flat Y-cable cable with JR connectors

3.66€  Inc Tax
Graupner Motor ESC Prop Set A (CCW) (GRFT4523)
Graupner ULTRA MOTOR 2804 2300kv CCW
Graupner Ultra Control BlHeli 20A 7.2-17.4V SBEC
Propeller Graupner Sport Prop 5x3 (2 pieces)

Motor specification:
Operating Voltage Range: 2-4S
Number of poles: 14
Shaft Diameter: 5mm
Case Diameter: 28mm
Kv (RPM/V): 2300
Recommended propeller: 5-6"


29.89€  Inc Tax
Hitec Heavy Duty Switch Harness (1HI7432)
Hitec Heavy Duty Switch Harness

4.88€  Inc Tax
Silicone Cable Red 4.0mm2 (1m) (6BI3039)
Muldental Elektronik Highly flexible 4.00 mm2 silicone power cable with red electrical insulation.

Stranded wire from 1020 strands 0.07 mm
Outer diameter: 4.2 mm
Max voltage: 48 V
Continuous current load: 42.5A
Peak current (5min): 73.2A

Made in Germany

4.27€  Inc Tax
Silicone Cable Black 4.0mm2 (1m) (6BI3039B)
Muldental Elektronik Highly flexible 4.00 mm2 silicone power cable with black electrical insulation.

Stranded wire from 1020 strands 0.07 mm
Outer diameter: 4.2 mm
Max voltage: 48 V
Continuous current load: 42.5A
Peak current (5min): 73.2A

Made in Germany

4.27€  Inc Tax
XT90 gold-plated connectors (1 pair) (GRS8468)
Two-pin power connector with gold-plated contacts

Packaging: XT90 male and XT90 female connector / 1 pair

Use this connectors for radio controlled (RC) airplanes, helicopters, cars, trucks, buggies, boats and other models

3.66€  Inc Tax
RAYTRONIC C30 Plus DC Balance Charger 300W (3EC1030P)
The Raytronic C30+ (300W) was designed in mind with high performance and very simple operation. Raytronic C30+ allow charging and discharging most common types of cells (NiCd, NiMh, LiPo, LiHV, Li-ion, LiFe, Pb), and is equipped with a built-in six-channel balancer, which ensures safe charging of lithium batteries. It offers also a measurement of voltage and internal resistance of individual cells (for lithium batteries).

Features:
Input supply voltage 10 - 26 V DC (socket XT60) For charging and discharging 1 - 16 NiCd / NiMH cells, 1 - 6 Li-ion / LiPo / LiHV / LiFe cells or 2- 20 V lead-acid batteries
Adjustable charging current (0.1 A - 12.0 A)
Adjustable discharge current (0.1 A - 3.0 A)
Max. power for charging 300 W, for discharging 5 W
Termination of charging using delta-peak automation for NiCd and NiMH batteries
Lithium and Pb batteries are charged using the "constant current / constant voltage" method
Adjustable delta-peak detection sensitivity for NiCd and NiMH batteries
Adjustable end voltage for charging and discharging for lithium batteries
Repeated cyclic operation of charging / discharging or discharging / charging for NiCd and NiMH batteries, up to 5 cycles
Four charging modes for lithium batteries - normal charging, fast charging, balancing charging and storage charging / discharging
Stop charging when the set time or the supplied charge is exceeded.
Memory for 5 charging / discharging programs.
Measurement of the total voltage of the set and individual cells (for lithium batteries)
Measurement of the total internal resistance of the set and individual cells (for lithium batteries)
The XT60 power output socket and the JST-XH 2-6S universal balancer socket allow you to connect the rechargeable battery directly without the need for a charging cable and balancer adapter (if the kit is equipped with an XT60 power connector and a JST-XH service connector) Two-line backlit LCD display with simple and clear menu and display of parameters during charging / discharging
A number of warning text messages contribute to safe operation - incorrect input voltage, incorrect connection, unsuitable battery or its condition, incorrect polarity at the output
Reverse polarity and short circuit protection at the output / li>
Compact plastic case, small dimensions
Built-in fan for forced cooling

Specifications:
Input voltage [V]: 10 - 26
Charging current [A]: 0.1 - 12
Discharge current [A]: 0.1 - 3
Number of channels: 1
NiCd: 1 - 16
NiMH: 1 - 16
Li-Pol: 1 - 6
Li-Ion: 1 - 6
Li-Fe: 1 - 6
Li-HV: 1 - 6
Pb: 1 - 10
Balancer: Yes
Charging power [W]: 300
Discharge power [W]: 5
Balancer current [A]: 1
Length [mm]: 87.5
Width [mm]: 48.5
Height [mm]: 30
Weight [g]: 95

29.89€  Inc Tax
G2.0mm gold (bullet) connector (10 pairs) (8GR40091)
Power gold-plated connector 2.0 mm with short spring pin with max. load 30A (long-term 15A). For cables up to 0.8 mm2 (18AWG). Transition resistance 0.80 mOhm, max. 500 V.

Packaging: 10 pairs (red and black shrink tube included)

Use this connectors for radio controlled (RC) airplanes, helicopters, cars, trucks, buggies, boats and other models

10.98€  Inc Tax
Dean's (T-plug) connector (5 pair) (LPAA800112)
Two-pin power connector with flat gold-plated contacts with max. load 50A (long term 25A) with grooved body for better grip and protection.

For cables up to 3.3 mm2 (12 AWG)
Transition resistance 0.45 mOhm, max. 500V

Packaging: 10 pieces / 5 pair

Use this connectors for radio controlled (RC) airplanes, helicopters, cars, trucks, buggies, boats and other models

6.10€  Inc Tax
Servo Extension Cable 300mm / JR (8GR30962)
Servo Extension Cable

Length: 300mm

Flat Extension cable with JR connectors (0.25mm2)


Use for radio controlled (RC) airplanes, helicopters, cars, trucks, buggies, boats and other models.

1.83€  Inc Tax
Glow Clip Charging Cable (8GR31240)
Glow Clip Charging Cable with 4mm banana connectors

4.88€  Inc Tax
Heat Shrink Tube 4mm (25cm) (8GR3304)
Heat Shrink Tube 4mm

Red and black
Length: 25cm each

1.22€  Inc Tax
SkyRC Temperature Sensor for SkyRC Charger (SK600040)
SkyRC Temperature Sensor for SkyRC Charger

9.76€  Inc Tax
4mm Gold (Banana) Charging Cable for XT60 Connector (8GR40560)
4mm gold (banana) charging cable for LiPo and other batteries with XT60 (male) connector.

AWG 14 silicone cable with 4mm gold (banana) connector - XT60 (male)

Use this adaptor / charging cable for charging the batteries for radio controlled (RC) airplanes, helicopters, cars, trucks, buggies, boats and other models and model accessories.

6.10€  Inc Tax
Graupner ULTRA 2806 2300KV Brushless Motor CCW (S7050)
Graupner ULTRA Race copter MOTOR 2300kv CCW

Specification:
Operating Voltage Range: 7.4-11.1V (2-3S)
Number of poles: 14
Shaft Diameter: 5mm
Case Diameter: 28mm
Case Length: 18.7mm
Kv (RPM/V): 2300
Weight (inc. spinner and 2mm connectors): 33.5g

9.76€  Inc Tax
Servo Cable Flat 0.25mm2 - 1m (8GR30071)
Flat cable, three-core, in Futaba colors (black / red / white) with PVC insulation

Conductor cross-section 0.25 mm2
Highly flexible, 65 strands 0.07 mm
External dimensions 1.5x4.8 mm
Max. 48 V, 5A.

Made in Germany

Price per 1 meter

Flat extension lead / cable without connectors.

Use for radio controlled (RC) model airplanes, helicopters, cars, trucks, buggies, boats and other applications.

1.22€  Inc Tax
G4 mm Gold Connectors (2 pair) (GR3386)
High current gold-plated G4 mm connectors

Packing: male (2 pcs), female (2 pcs)

Use this connectors for radio controlled (RC) airplanes, helicopters, cars, trucks, buggies, boats and other models

3.05€  Inc Tax
Tamiya Connector (male) (LPAA800240)
Tamiya Plug (male)

Packaging: Tamiya connector with gold contacts / 1 piece

Use this connectors for radio controlled (RC) airplanes, helicopters, cars, trucks, buggies, boats and other models

1.22€  Inc Tax
Tamiya Plug Silver (female) (8GR4050)
Tamiya Plug Silver (female)

0.61€  Inc Tax
Battery Adapter XT60 (male) - EC3 (female) (LPAA800294)
Two-pin battery adapter with gold-plated contacts

Packaging: 1 piece / XT60 (male) - EC3 (female)

Use this connector adapter for radio controlled (RC) airplanes, helicopters, cars, trucks, buggies, boats and other models

4.27€  Inc Tax
SkyRC XT60 Charging Cable for Deans (T-plug) Connector (SK600023-15)
SkyRC XT60 charging cable for LiPo battery with Deans (T-plug) connector

XT60 (female) and Deans (male)

4.27€  Inc Tax
Battery Adapter XT60 (male) - Deans (female) (LPAA800293)
Two-pin battery adapter with gold-plated contacts

Packaging: 1 piece / XT60 (male) - Deans/T-plug (female)

Use this connector adapter for radio controlled (RC) airplanes, helicopters, cars, trucks, buggies, boats and other models

4.27€  Inc Tax
Hobbywing Skywalker 80A ESC 2-6s, 5A UBEC (HW30216200)

HOBBYWING SKYWALKER 80A SPEED CONTROLLER

Good quality components guarantees the high quality and reliability of SkyWalker series of aircraft ESCs. Multiple protection features include abnormal input voltage, ESC thermal protection, throttle signal loss (or Fail Safe), and low voltage cutoff effectively prolongs the service life of the ESC.

HobbyWing Skywalker Series Features:
High Quality & Reliability
Programmable Parameters
Multiple Protections

Spec Check:
Brushed/Brushless: Brushless
Cont./Peak Current: 80A/100A
Input: 2-6S LiPo
BEC Output: Switch Mode: 5V,5A
Input Wires: Red-12AWG-150mm*1, Black-12AWG-150mm*1
Output Wires:Black-14AWG-100mm*3
Input Connectors: No
Output Connectors: No
LED Program Card: Supported
WiFi Module: Not Supported
Size: 86.0x38.0x12.0mm
Weight: 82g


41.48€  Inc Tax
4mm Gold (Banana) Charging Cable for XT90 Connector (8GR40561)
4mm gold (banana) charging cable for LiPo and other batteries with XT90 (male) connector.

AWG 14 silicone cable with 4mm gold (banana) connector - XT90 (male)

Use this adaptor / charging cable for charging the batteries for radio controlled (RC) airplanes, helicopters, cars, trucks, buggies, boats and other models and model accessories.
7.93€  Inc Tax
ALU Servo Arm (1") 25.4mm / M3 / 25T (EFSA10FM3)
Extreme Flight aluminum servo arm 1"

Length: 25.4mm
Internal Thread: M3
Servo spline: 25T

Servo arm / control horn for use in radio controlled (RC) airplanes and and other models. 

7.93€  Inc Tax
Graupner XH-Balance Charger 3-4S LiPo (GR3S4SBAL)
Graupner XH-Balance Charger 3-4S LiPo

Microprocessor controlled charger with integrated balancer for lithium batteries (LiPo, LiIo).

7-segment LED voltage and charge status indicator
For LiPo batteries with 3-4 cells and XH balancer connector
Charging power: approx. 40 W
Charging current: max. 3 A
Weight: 135 g
Automatic test and detection of batterie cells

Technical data:

Connector: XH
Width [mm]: 60
Height [mm]: 26
Weight [g]: 135
Max. charging current [A]: 3
Number of LiPo, Lilo cells: 3 - 4
Length [mm]: 98
AC input voltage [V]: 100 ... 240 V AC
Dimensions: [LxWxH in mm]: 98 x 60 x 26
Max. charging power [W]: 40

Use this 3-4S LiPo battery Balance Charger for radio controlled (RC) model airplanes, helicopters, cars, trucks, buggies, boats and other Lipo batteries.

14.64€  Inc Tax
Per Page      1 - 30 of 132