Servos

Sort By:  
KST Servo Combo 3x X20-2208 v2 + 1x X20-1035 v2 (8.4V) (KSTX20-V2COMBO)

3x KST X20-2208 v2.0 HV Digital Brushless Servo Motor (titanium gear)

The KST X20-2208 v2 HV Brushless servo offers a significantly longer life-span, with a superior power to weight ratio. The servo features a nicely machined aluminium case and offerers high voltage capability. It can be run directly from a 2S LiPo battery without the need for a separate voltage regulator.

Another huge benefit of X20 servos is the all new design of a circuit board that generates no counter EMF in any working conditions. It eliminates any possible interference with your flybarless system or receiver unit thus as a result giving you only the best in-flight performance.

Due to the extreme reliability and performance these servos are used in film and motion picture industry as well as in robotics, drones, UAV, UAS, academic researches, and other highly demanding applications such as use in various military applications,..

In addition to the four heavy duty plastic servo arms it comes with the two anodised aluminium servo horns with M2 threaded holes and with the one gear-saver insert.

Technical Details:
Voltage (max.) [V]: 8.4

Torque [kg/cm]@6.0V: 18.0
Torque [kg/cm]@7.4V: 22.0
Torque [kg/cm]@8.4V: 25.0

Speed [s/60°]@6.0V: 0.09
Speed [s/60°]@7.4V: 0.08
Speed [s/60°]@8.4V: 0.07

Width [mm]: 20.0
Length [mm]: 40.5
Height [mm]: 38.0

Weight [g]: 72.0

Motor typ: Brushless
Working Frequency: 1520us/333Hz, 900us-2100us
Resolution: <2us
Gear: Titanium Alloy
Ball Bearing: 2BB
Output shaft type: 25T
Servo size: Standard
Waterproof: No
Manufacturer: KST


Suitable for use as a swashplate servo on 550-800 size RC helicopters;

Such as Goblin 570, 630, 650, 700, 770, T-REX 550, 600, 700, Mikado LOGO 550, 600, 700, 800, MSH PROTOS 700 MAX, SOXOS 550, 600, 700 and similar,..


1x KST X20-1035 v2.0 HV Digital Brushless Servo Motor (titanium gear)

The KST X20-1035 v2 HV Brushless servo offers a significantly longer life-span, with a superior power to weight ratio. The servo features a nicely machined aluminium case and offerers high voltage capability. It can be run directly from a 2S LiPo battery without the need for a separate voltage regulator.

Another huge benefit of X20 servos is the all new design of a circuit board that generates no counter EMF in any working conditions. It eliminates any possible interference with your flybarless system or receiver unit thus as a result giving you only the best in-flight performance.

Due to the extreme reliability and performance these servos are used in film and motion picture industry as well as in robotics, drones, UAV, UAS, academic researches, and other highly demanding applications such as use in various military applications,..

In addition to the four heavy duty plastic servo arms it comes with the two anodised aluminium servo horns with M2 threaded holes and with the one gear-saver insert.

Technical Details:
Voltage (max.) [V]: 8.4

Torque [kg/cm]@6.0V: 8.5
Torque [kg/cm]@7.4V: 10.3
Torque [kg/cm]@8.4V: 12.0

Speed [s/60°]@6.0V: 0.04
Speed [s/60°]@7.4V: 0.035
Speed [s/60°]@8.4V: 0.03

Width [mm]: 20.0
Length [mm]: 40.5
Height [mm]: 38.0

Weight [g]: 72.0

Motor typ: Brushless
Working Frequency: 760us/560Hz, 450us-1050us
Resolution: <2us
Gear: Titanium Alloy
Ball Bearing: 2BB
Output shaft type: 25T
Servo size: Standard
Waterproof: No
Manufacturer: KST


Suitable for use as a tail servo on 550-800 size RC helicopters;

Such as Goblin 570, 630, 650, 700, 770, T-REX 550, 600, 700, Mikado LOGO 550, 600, 700, 800, MSH PROTOS 700 MAX, SOXOS 550, 600, 700 and similar,..

598.41€  Inc Tax
Servo KST X12-508 HV 6.2kg/cm (8.4V) (KST-0201)

KST X12-508 HV Digital Coreless Servo Motor (metal gear)

The KST X12-508 HV Brushless servo offers a significantly longer life-span, with a superior power to weight ratio. The servo features a nicely machined aluminium case and offerers high voltage capability. It can be run directly from a 2S LiPo battery without the need for a separate voltage regulator.

Another great benefit of X12 servos is the all new design of a circuit board that generates no counter EMF in any working conditions. It eliminates any possible interference with your flybarless system or receiver unit thus as a result giving you only the best in-flight performance.

Due to the extreme reliability and performance this servos are used in film and motion picture industry as well as in robotics, drones, UAV, UAS, academic researches, and other highly demanding applications such as use in various military projects,..


Technical Details:
Voltage (max.) [V]: 8.4

Torque [kg/cm]@6.0V: 4.2
Torque [kg/cm]@7.4V: 5.2
Torque [kg/cm]@8.4V: 6.2

Speed [s/60°]@6.0V: 0.09
Speed [s/60°]@7.4V: 0.08
Speed [s/60°]@8.4V: 0.07

Width [mm]: 12.0
Length [mm]: 23.0
Height [mm]: 27.5

Weight [g]: 20.0

Motor typ: Coreless
Working Frequency: 1520us/333Hz, 900us-2100us
Resolution: <2us
Gear: Metal Gear
Ball Bearing: 2BB
Output shaft type: 25T
Servo size: Micro
Waterproof: No
Manufacturer: KST


Suitable for Swashplate use on 250-470 size RC helicopters;

Such as Oxy 3, Goblin 280 Fireball, 380, 420, T-REX 250, 300, 450, 470, MSH PROTOS 380, and similars,..

39.04€  Inc Tax
Savöx SV-1250MG Digital Servo 8.0kg/cm 7.4V (1SV2504-HV)
Savox SV-1250MG Digital Servo

Digital High Voltage Coreless Servo with Metal Gear

Features:
- Leading edge digital servo technology
- High efficiency Coreless motor
- Accurate and fast response
- Super high resolution
- Aluminium center case for improved motor cooling and strength
- Ball bearing
- Precision Metal gears

Technical specifications:
Servo Technology: Digital High Voltage
Input Voltage (V): 6.0V - 7.4V
Servo Type / Size: Mini
Motor Type: Coreless Motor
Gear Material: Metal gears
Bearing: Ball bearing
Servo Case: Aluminium/Composite
Speed 60°/sec @ 7.4V: 0.095 sec/60°
Torque kg/cm @ 7.4V: 8.0 Kg/cm
Length: 35.0mm
Width: 15.0mm
Height: 29.2mm
Weight: 29.5 g
Connector type: JR
Spline size: 25T spline


48.80€  Inc Tax
56.73€
Hitec DPC-11 Universal Programming Interface (Dongle) (1HI33012)
Hitec DPC-11 PC program interface for all Hitec programmable servos

Dongle for PC Programmer (servo programmer)

15.86€  Inc Tax
Hitec HS-75BB Retract Servo 8.2kg/cm 6V (1HI3025)
Hitec HS-75BB Metal Gear Ball Bearing Retract Servo

Product Description
With its low profile design, strong torque and precision movement, the HS-75BB is a great choice to move your retract gear in a realistic manner that you need. Note, this is a retract or “bang bang” servo and only travels from one end to the other (180 degrees).

Features:
Low Profile Design
Durable Nylon Gears
Top Ball Bearings
Strong Torque and Precise Movement
Slow Speed for Realistic Retract Action

Specifications:
Operating Voltage Range (Volts DC): 4.8V ~ 6.0V
Speed (Second @ 60°): 0.45 ~ 0.34
Maximum Torque Range kg/cm: 6.6 ~ 8.2
Current Draw at Idle: 1 mA
No Load Operating Current Draw: 150 mA
Stall Current Draw: 1000 mA
Dead Band Width: 20 µs

Physical Specifications:
Dimensions (mm): 44.0 x 23.0 x 25.0
Weight (g): 35.0
Circuit Type: HT7003 Analog SMT
Motor Type: 3 Pole Metal Brush Ferrite
Gear Material: Nylon
Bearing Type: Top Ball Bearing
Output Shaft (type / Ømm): Standard 24
Case Material: Plastic
Dust/Water Resistance: Splash Proof

Use this retract servo for retracting the landing gear on the radio controlled (RC) airplanes and other models.

29.89€  Inc Tax
Servo KST X15-755X HV 10.2kg/cm (8.4V) 760us (KST-0302)

KST X15-755X HV Digital Coreless Servo Motor (metal gear)

The KST X15-755X HV Brushless servo offers a significantly longer life-span, with a superior power to weight ratio. The servo features a nicely machined aluminium case and offerers high voltage capability. It can be run directly from a 2S LiPo battery without the need for a separate voltage regulator.

Another great benefit of X15 servos is the all new design of a circuit board that generates no counter EMF in any working conditions. It eliminates any possible interference with your flybarless system or receiver unit thus as a result giving you only the best in-flight performance.

Due to the extreme reliability and performance this servos are used in film and motion picture industry as well as in robotics, drones, UAV, UAS, academic researches, and other highly demanding applications such as use in various military projects,..


Technical Details:
Voltage (max.) [V]: 8.4

Torque [kg/cm]@6.0V: 7.2
Torque [kg/cm]@7.4V: 9.0
Torque [kg/cm]@8.4V: 10.2

Speed [s/60°]@6.0V: 0.06
Speed [s/60°]@7.4V: 0.05
Speed [s/60°]@8.4V: 0.04

Width [mm]: 15.0
Length [mm]: 35.5
Height [mm]: 32.5

Weight [g]: 40.0

Motor typ: Coreless
Working Frequency: 760us/560Hz, 450us-1050us
Resolution: <2us
Gear: Hardened Steel
Ball Bearing: 2BB
Output shaft type: 25T
Servo size: Mini
Waterproof: No
Manufacturer: KST


Suitable for use as s Tail Servo on 320-580 size RC Helicopters;

Such as Goblin 380 420, 500, KRAKEN 580, T-REX 450PRO DFC, 450L, 470, 500, Mikado LOGO 480, 500, OXY 5, and similar,..


79.30€  Inc Tax
SRT W35 Digital Coreless HV Waterproof Servo 35kg/cm (8.4V) (DHW35)
SRT W35 Digital Coreless HV Waterproof Servo

Specifications:
Torque (6.0V): 25.0 kg-cm
Torque (8.4V): 35.0 kg-cm
Speed (6.0V): 0.15s
Speed (8.4V): 0.10s
Operating Voltage: 6.0 ~ 8.4 DC Volts
Bearing: Dual BB
Working Frequence: 1520μs / 330hz
Weight: 82.5 g (1.98 oz)
Motor Type: Coreless
Gear Type: Titanium & Steel
Size: 40.7x20.5x38.6 mm


Use this servo for radio controlled (RC) airplanes and models requiring high torque and precision. Due to its waterproof case this standard-sized servo is also suitable for trucks, buggies, crawlers and other models. It features a 25T output spline.

63.44€  Inc Tax
Hitec Servo Wing Mount Set (HS-80/81/82) (1HI7165)
Hitec Servo Wing Mount Set (HS-80/81/82)

Product Description
This is a universal mount designed to accept almost any micro servo. The top of the mount features an aerodynamic fairing designed to streamline airflow around the servo linkage.


Specifications:
Diameter (mm): 50
Thickness (mm): 14
Thickness with the fairing (mm): 28

Use this wing servo mount (servo mounting bracket) for radio controlled (RC) airplanes, gliders, hotliners, and other models.

7.32€  Inc Tax
Align DS455M Digital Servo (HSD45501)
Suitable for T-Rex 250/450 rudder use
• Faster speed with high torque performance, allowing helicopter to perform with faster and higher precision.
• High rigidity, shock resistant metal gears with high strength composite alloy gears with durable structure characteristics.
• Aluminum alloy mid case construction for instantaneous heat dissipation, maintaining servos high efficiency.
• Supports digital and analog control signal.
• Powerful and precise servo.
• Supports 8.4V high voltage input to provide optimal speed and torque performance of the servo.

Specifications
Stall torque: 2.2kg/cm (6.0V), 2.9kg/cm (8.4V)
Motion speed (60°): 0.05sec (6.0V), 0.04sec (8.4V)
Rating voltage: DC 6.0V - 8.4V
Temperature range: -20°C ~ +60°C
Dimensions: 23x12x31.3mm
Weight: 20g

Content
• 1x DS455M Digital Servo
• 2x Socket Button Head Self Tapping Screw
• 1x Socket Screw
• 2x Servo Arm


39.65€  Inc Tax
Power HD DSM44 Digital Servo 1.6kg/cm 6V (HD-DSM44)
The Power HD DSM44 digital servo is a micro servo with digital control electronics and metal gears. Servo horns and associated hardware are included.
 
Specs:
Torque(4.8V): 1.2 kg/cm
Torque(6.0V): 1.6 kg/cm
Speed: 0.09 sec (4.8V) / 0.07 sec (6.0V)
Operating Voltage: 4.8 ~ 6.0 DC Volts
Weight: 5.9g
Gear Type: Metal
Controller: Digital
Operating Temperature: -10℃~50℃
Size: 22x8.7x27mm
Spline: 25

14.03€  Inc Tax
Per Page      1 - 10 of 10
  • 1