ESCs

Sort By:  
Hobbywing Skywalker 40A ESC 2-3s, 3A BEC (HW80060020)

HOBBYWING SKYWALKER 40A SPEED CONTROLLER

Good quality components guarantees the high quality and reliability of SkyWalker series of aircraft ESCs. Multiple protection features include abnormal input voltage, ESC thermal, throttle signal loss (or Fail Safe), and low voltage cutoff effectively prolongs the service life of the ESC.

HobbyWing Skywalker Series Features:
High Quality & Reliability
Programmable Parameters
Multiple Protections

Spec Check:
Brushed/Brushless: Brushless
Cont./Peak Current: 40A/55A
Input: 2-3S LiPo
BEC Output: Linear mode:5V,3A
Input Wires: Red-14AWG-100mm*1, Black-14AWG-100mm*1
Output Wires:Black-14AWG-75mm*3
Input Connectors: 3.5 Gold Connectors (Female)
Output Connecotors: No
LED Program Card: Supported
WiFi Module: Not Supported
Size: 68.0x25.0x8.0mm
Weight: 39g


18.91€  Inc Tax
Hobbywing Skywalker 15A ESC 2-3s, 2A BEC (HW30205150)

HOBBYWING SKYWALKER 15A SPEED CONTROLLER

Good quality components guarantees the high quality and reliability of SkyWalker series of aircraft ESCs. Multiple protection features include abnormal input voltage, ESC thermal, throttle signal loss (or Fail Safe), and low voltage cutoff effectively prolongs the service life of the ESC.

HobbyWing Skywalker Series Features:
High Quality & Reliability
Programmable Parameters
Multiple Protections

Spec Check:
Brushed/Brushless: Brushless
Cont./Peak Current: 15A/20A
Input: 2-3S LiPo
BEC Output: Linear mode:5V,2A
Input Wires: Red-20AWG-100mm*1, Black-20AWG-100mm*1
Output Wires:Black-20AWG-100mm*3
Input Connectors: No
Output Connecotors: No
LED Program Card: Supported
WiFi Module: Not Supported
Size: 48.0x22.5x6.0mm
Weight: 17g


14.03€  Inc Tax
Hobbywing Skywalker 60A ESC 2-6s, 5A UBEC (HW30216100)

HOBBYWING SKYWALKER 60A SPEED CONTROLLER

Good quality components guarantees the high quality and reliability of SkyWalker series of aircraft ESCs. Multiple protection features include abnormal input voltage, ESC thermal protection, throttle signal loss (or Fail Safe), and low voltage cutoff effectively prolongs the service life of the ESC.

HobbyWing Skywalker Series Features:
High Quality & Reliability
Programmable Parameters
Multiple Protections

Spec Check:
Brushed/Brushless: Brushless
Cont./Peak Current: 60A/80A
Input: 2-6S LiPo
BEC Output: Switch Mode: 5V,5A
Input Wires: Red-14AWG-100mm*1, Black-14AWG-100mm*1
Output Wires:Black-14AWG-100mm*3
Input Connectors: No
Output Connectors: No
LED Program Card: Supported
WiFi Module: Not Supported
Size: 77.0x35.0x14.0mm
Weight: 63g


31.72€  Inc Tax
Hobbywing Skywalker 20A ESC 2-3s, 2A BEC (HW80060010)

HOBBYWING SKYWALKER 20A SPEED CONTROLLER

Good quality components guarantees the high quality and reliability of SkyWalker series of aircraft ESCs. Multiple protection features include abnormal input voltage, ESC thermal, throttle signal loss (or Fail Safe), and low voltage cutoff effectively prolongs the service life of the ESC.

HobbyWing Skywalker Series Features:
High Quality & Reliability
Programmable Parameters
Multiple Protections

Spec Check:
Brushed/Brushless: Brushless
Cont./Peak Current: 20A/25A
Input: 2-3S LiPo
BEC Output: Linear mode:5V,2A
Input Wires: Red-18AWG-100mm*1, Black-18AWG-100mm*1
Output Wires:Black-18AWG-75mm*3
Input Connectors: 3.5 Gold Connectors (Female)
Output Connecotors: No
LED Program Card: Supported
WiFi Module: Not Supported
Size: 42.0x25.0x8.0mm
Weight: 19g


15.25€  Inc Tax
Hobbywing EzRun MAX10 SCT Brushless ESC 120A 2-4S, 4A BEC (HW30102601)
Hobbywing EzRun MAX10 SCT Brushless ESC 120A 2-4S, 4A BEC

The Hobbywing EzRun MAX10 SCT Sensorless Waterproof Brushless ESC compatible with 2-4S LiPo power provides the ultimate power upgrade solution for many popular 1/10 scale vehicles.

Features:

Capacitor Thermal Protection:
The capacitor thermal protection implemented in the MAX10 SCT will effectively protect capacitors from dielectric failure causing irreversible damage to the ESC due to overload.

Motor Thermal Protection circuit (in Sensorless Mode):
When pairing the MAX10 SCT with a Hobbywing matching motors (i.e. EzRun 3652/3660 G2 motor), the temperature sensor cable on the ESC will monitor the motor temperature and protect the motor from irreversible damage due to overheating in real time.

High Reliability & Durability:
Built with high-quality components and coupled with cutting-edge firmware, the MAX10 SCT is able to deliver unmatched power and performance for even the most extreme racing applications, but it is also responsive enough to protect itself from damage due to overloading due to physical abuse, overuse or even human error.

Super Internal BEC:
The built-in switch mode BEC with a maximum output of 8A (peak) and voltage adjustable between 6V and 7.4V allows the use of various high voltage servo

Applicable to All Weather Conditions:
The waterproof and dust-proof design allows the MAX10 SCT to be used in all weather conditions without any issue of damage caused to the ESC from water or debris.

Advanced and Secure Electronic Switch:
The MAX10 SCT features an electronic switch with a lifespan of over 50000 on/off cycles, housed in a completely waterproof, dust-proof and shock-resistant design.

Regular Firmware Updates Free of Charge:
You can upgrade the MAX10 SCT with the Hobbywing WiFi/USB LINK software, a WiFi module/ LED or LCD program box and a smartphone/laptop. Hobbywing updates its ESC firmware regularly giving you upgraded features more often when available.

Specifications:
Scale: 1/10th
Brushed/Brushless: Brushless
Sensored: No
Waterproof: Yes
Cont./Peak Current: 120A/830A
Input: 2-4 LiPo/6-12 cells NiMh
BEC Output: Switch Mode 6V/7.4V, 4A
Input Wires: Red-12AWG-200mm*1, Black-12AWG-200mm*1
Output Wires: Black-12AWG-200mm*3
Input Connectors: No
Output Connectors: 4mm Gold Bullet Connectors (female)
Fan Size: 25x25x10mm
Fan Power: 5-7.4V (powered by BEC)

Programming:
SET Button on ESC: Supported
LED Program Box: Supported
LCD Program Box: Supported
WiFi Module: Supported
Firmware Upgrade: Supported
Size: 49.0x39.5x34.7mm
Weight: 105g

Applications:
Motors: Sensorless and Sensored (in SL mode) Brushless motors
Vehicles: 1/10th SCTs/Truck/Monster Truck
kV Rating:
  • 2S LiPo: kV ≤ 6000 (36xx size motors)
  • 3S LiPo: kV ≤ 4000 (36xx size motors)
  • 4S LiPo: kV ≤ 3000 (36xx size motors)


79.91€  Inc Tax
Hobbywing EzRun MAX8 Brushless ESC 150A 3-6S, 6A BEC (HW30103200)
Hobbywing EzRun MAX8 Brushless ESC 150A 3-6S, 6A BEC

EzRun MAX8 Brushless Waterproof ESC for 1/8th Scale

Features:

Super Built-in BEC:
The world’s 1st 1/8th scale ESC adopted the super built-in BEC with the max output current of up to 15A (peak) and switchable output voltage (6-7.4V). It can drive different servos, high voltage servos at ease and bring amazing control feel to drivers.

Advanced and Secure Electronic Switch:
The electronic switch with the lifespan of over 50.000 times of switching on & off features a completely waterproof, dust-proof and shock-resistant design. Completely solved problems like stuck reed and rusted contact points caused by dust and moisture.

Wide application:
The ESC provides the optimal upgrade solution for many popular 1:8th scale monster trucks like Traxxas E-Revo & E-Maxx, HPI Savage and Thunder Tiger E-Mat. It is also applicable to the other trucks and buggies.

Almost maintenance free:
The whole ESC except the cooling fan is basically maintenance free. Besides the fan has also adopted the special anti-shock design, reduced damage brought by frequent jumps of the vehicle, greatly reduced maintenance work to the fan.

Specifications:
Scale: 1/8th
Brushed/Brushless: Brushless
Sensored: No
Waterproof: Yes
Cont./Peak Current: 150A/950A
Input: 3-6S LiPo/9-18 cells NiMh
BEC Output: Switch Mode 6V/7.4V, 6A
Input Wires: Red-10AWG-150mm*1, Black-10AWG-150mm*1
Output Wires: Black-10AWG-200mm*3
Input Connectors: T-Plug (Deans)
Output Connectors: 6.5mm Gold Connectors (female)
Fan Size: 30x30x10mm
Fan Power: 5-7.4V (powered by BEC)

Programming:
SET Button on ESC: Supported
LED Program Box: Supported
LCD Program Box: Supported
WiFi Module: Supported
Firmware Upgrade: Supported
Size: 59.8x48.0x36.8mm
Weight: 174g

Applications:
Motors: Sensorless and Sensored (in SL mode) Brushless motors
Vehicles: 1/8th Touring Car/Buggy/Truck
kV Rating:
  • 4S LiPo: kV ≤ 3000 (40xx size motors)
  • 6S LiPo: kV ≤ 2400 (40xx size motors)


119.56€  Inc Tax
Hobbywing EzRun MAX6 Brushless ESC 160A 3-8S, 6A BEC (HW30105000)
Hobbywing EzRun MAX6 Brushless ESC 160A 3-8S, 6A BEC

This is the Hobbywing EzRun MAX6 1/6 scale waterproof brushless ESC. Compatible with 3-8S LiPo power, the MAX6 is a great choice for 1/6 and 1/7 scale vehicles like the Traxxas XO-1, but is also suitable for various 1/8 scale heavy vehicles like the E-REVO and CEN GST-E Monster Trucks. It's the ideal option for high-end aggressively powered builds.

Features:

High Reliability & Durability:
Built with the most rugged and high-quality components and coupled with cutting-edge firmware, the EzRun MAX6 is able to deliver unmatched power and performance for even the most hardcore of racing applications, but is also responsive enough to protect itself from damage due to overloading due to physical abuse, overuse or even human error.

Great Flexibility & Versatility:
With incredible acceleration capabilities and a rock-solid, stable output, the MAX6 can handle instant full-torque start-ups for wheelies, high-speed racing on straightaways and powering through the bumpiest terrain. The user will have the choice of adjusting the ESC parameters as per his preference and ability.

Applicable for All Weather Conditions:
The waterproof and dust-proof design allows the MAX6 to be used in all weather conditions without any issue of damage caused to the ESC from water or dust.

High Voltage Built-in BEC:
The MAX6 has adopted the world's first HV built-in BEC with an output current of up to 25Amps (peak) and a switchable output voltage of 6-7.4V. The high voltage BEC is designed to handle today's high voltage servos on demand used by large scale vehicles.

Advanced & Secure Electronic Switch:
The MAX6 features an electronic switch with a lifespan of over 50,000 on/off cycles, housed in a completely waterproof, dust-proof and shock-resistant design.

Regular Firmware Updates Free of Charge:
You can upgrade the MAX6 with the Hobbywing USB LINK software, a multifunction LCD program box and a laptop. Hobbywing updates it's ESC firmware regularly giving you upgraded features more often when available.

Maintenance Free:
The ESC, minus the cooling fan, is basically maintenance free. The cooling fan is designed to be shockproof, which in turn will reduce damage brought on by frequent vehicle big jumps and landings on hard surfaces.

Built-in Anti-Spark System:
The MAX6 is built wit an internal anti-spark circuitry that protects not only battery connectors from damage but helps to prevent physical injury due to burnt fingers from the inevitable issue of sparking when hooking up the ESC to higher voltage battery packs (6S/7S/8S).

Specifications:
Scale: 1/6th 1/7th
Brushed/Brushless: Brushless
Sensored: No
Waterproof: Yes
Cont./Peak Current: 160A/1050A
Input: 3-8S LiPo/9-24 cells NiMh
BEC Output: Switch Mode 6V/7.4V, 6A
Input Wires: Red-10AWG-200mm*1, Black-10AWG-200mm*1
Output Wires: Black-10AWG-200mm*3
Input Connectors: No
Output Connectors: 6.5mm Gold Connectors (female)
Fan Size: 35x35x10mm
Fan Power: 5-7.4V (powered by BEC)

Programming:
SET Button on ESC: Supported
LED Program Box: Supported
LCD Program Box: Supported
WiFi Module: Supported
Firmware Upgrade: Supported
Size: 70.0x56.0x46.5mm
Weight: 240g

Applications:
Motors: Sensorless and Sensored (in SL mode) Brushless motors
Vehicles: 1/6th and 1/7th Touring Car/Buggy/Truck
kV Rating:
  • 6S LiPo: kV ≤ 1500 (5892 size motors)
  • 8S LiPo: kV ≤ 1200 (5892 size motors)


139.69€  Inc Tax
Hobbywing EzRun MAX5 Brushless ESC 200A 3-8S, 6A BEC (HW30104000)
Hobbywing EzRun MAX5 Brushless ESC 200A 3-8S, 6A BEC

Hobbywing EzRun MAX5 is a waterproof brushless ESC. Compatible with 3-8S LiPo power, the MAX5 provides the ultimate power upgrade solution for many popular 1/5 scale vehicles like the HPI Baja Buggy, Losi 5IVE-T Nitro-to-Electric Truck, and Desert Buggy XL Nitro-to-Electric buggy. It is also suitable for various other brands of 1/5 scale on-road cars, buggies and truggies.

Features:

High Reliability & Durability:
Built with the most rugged and high-quality components and coupled with cutting-edge firmware, the EzRun MAX5 is able to deliver unmatched power and performance for even the most hardcore of racing applications, but is also responsive enough to protect itself from damage due to overloading due to physical abuse, overuse or even human error.

Great Flexibility & Versatility:
With incredible acceleration capabilities and a rock-solid, stable output, the MAX5 can handle instant full-torque start-ups for wheelies, high-speed racing on straightaways and powering through the bumpiest terrain. The user will have the choice of adjusting the ESC parameters as per his preference and ability.

Applicable for All Weather Conditions:
The waterproof and dust-proof design allows the MAX5 to be used in all weather conditions without any issue of damage caused to the ESC from water or dust.

High Voltage Built-in BEC:
The MAX5 has adopted the world's first HV built-in BEC with an output current of up to 25Amps (peak) and a switchable output voltage of 6-7.4V. The high voltage BEC is designed to handle today's high voltage servos on demand used by large scale vehicles.

Advanced & Secure Electronic Switch:
The MAX5 features an electronic switch with a lifespan of over 50,000 on/off cycles, housed in a completely waterproof, dust-proof and shock-resistant design.

Regular Firmware Updates Free of Charge:
You can upgrade the MAX5 with the Hobbywing USB LINK software, a multifunction LCD program box and a laptop. Hobbywing updates it's ESC firmware regularly giving you upgraded features more often when available.

Maintenance Free:
The ESC, minus the cooling fan, is basically maintenance free. The cooling fan is designed to be shockproof, which in turn will reduce damage brought on by frequent vehicle big jumps and landings on hard surfaces.

Built-in Anti-Spark System:
The MAX5 is built wit an internal anti-spark circuitry that protects not only battery connectors from damage but helps to prevent physical injury due to burnt fingers from the inevitable issue of sparking when hooking up the ESC to higher voltage battery packs (6S/7S/8S).

Specifications:
Scale: 1/5th
Brushed/Brushless: Brushless
Sensored: No
Waterproof: Yes
Cont./Peak Current: 200A/1300A
Input: 3-8S LiPo/9-24 cells NiMh
BEC Output: Switch Mode 6V/7.4V, 6A
Input Wires: Red-8AWG-200mm*1, Black-8AWG-200mm*1
Output Wires: Black-10AWG-200mm*3
Input Connectors: No
Output Connectors: 6.5mm Gold Connectors (female)

Programming:
SET Button on ESC: Supported
LED Program Box: Supported
LCD Program Box: Supported
WiFi Module: Supported
Firmware Upgrade: Supported
Size: 93.4x58.1x47.8mm (with fan)
Weight: 342g

Applications:
Motors: Sensorless and Sensored (in SL mode) Brushless motors
Vehicles: 1/5th Touring Car/Buggy/Truck
kV Rating:
  • 8S LiPo: kV ≤ 1000 (58110 size motors)


199.47€  Inc Tax
Hobbywing EzRun MAX10 Brushless ESC 60A 2-3S, 3A BEC (HW30102602)
Hobbywing EzRun MAX10 Brushless ESC 60A 2-3S, 3A BEC

The Hobbywing EzRun MAX10 Sensorless Brushless ESC uses an advanced Motor Thermal Protection circuit to monitor the motor temperature and protect the motor from irreversible damage due to overheating. Combined this with a high voltage internal BEC, a high quality power switch and the durability that has made Hobbywing famous and you have an excellent choice for powering your vehicle in any sensorless application.

Features:

Capacitor Thermal Protection:
The capacitor thermal protection first implemented in the MAX10 will effectively protect capacitors from dielectric failure causing irreversible damage to the ESC due to overload.

Motor Thermal Protection circuit (in Sensorless Mode):
When pairing the MAX10 with a Hobbywing matching motor (i.e. EzRun 3652/3660 G2 motor), the temperature sensor cable on the ESC will monitor the motor temperature and protect the motor from irreversible damage due to overheating in real time.

High Reliability & Durability:
Built with high-quality components and coupled with cutting-edge firmware, the MAX10 is able to deliver unmatched power and performance for even the most extreme racing applications, but it is also responsive enough to protect itself from damage due to overloading due to physical abuse, overuse or even human error.

Super Internal BEC:
The built-in switch mode BEC with a maximum output of 6A and voltage adjustable between 6V and 7.4V allows the use of various high voltage servo

Applicable to All Weather Conditions:
The waterproof and dust-proof design allows the MAX10 to be used in all weather conditions without any issue of damage caused to the ESC from water or debris.

Advanced and Secure Electronic Switch:
The MAX10 features an electronic switch with a lifespan of over 50000 on/off cycles, housed in a completely waterproof, dust-proof and shock-resistant design.

Regular Firmware Updates Free of Charge:
You can upgrade the MAX10 with the Hobbywing WiFi/USB LINK software, a WiFi module/ LED or LCD program box and a smartphone/laptop. Hobbywing updates its ESC firmware regularly giving you upgraded features more often when available.

Specifications:
Scale: 1/10th
Brushed/Brushless: Brushless
Sensored: No
Waterproof: Yes
Cont./Peak Current: 60A/450A
Input: 2-3S LiPo/6-9 cells NiMh
BEC Output: Switch Mode 6V/7.4V, 3A
Input Wires: Red-14AWG-200mm*1, Black-14AWG-200mm*1
Output Wires: Black-14AWG-200mm*3
Input Connectors: No
Output Connectors: 3.5mm Gold Bullet Connectors (female)
Fan Size: 25x25x10mm
Fan Power: 5-7.4V (powered by BEC)

Programming:
SET Button on ESC: Supported
LED Program Box: Supported
LCD Program Box: Supported
WiFi Module: Supported
Firmware Upgrade: Supported
Size: 39.4x32.8x23.1mm
Weight: 67.8g

Applications:
Motors: Sensorless and Sensored (in SL mode) Brushless motors
Vehicles: 1/10th Buggy/On-Road/Light-weight 2WD SCT/Truck/Monster Truck
kV Rating:
  • 2S LiPo: kV ≤ 6000 (3652 size motors)
  • 3S LiPo: kV ≤ 4000 (3652 size motors)


59.78€  Inc Tax
Hobbywing Skywalker 80A ESC 2-6s, 5A UBEC (HW30216200)

HOBBYWING SKYWALKER 80A SPEED CONTROLLER

Good quality components guarantees the high quality and reliability of SkyWalker series of aircraft ESCs. Multiple protection features include abnormal input voltage, ESC thermal protection, throttle signal loss (or Fail Safe), and low voltage cutoff effectively prolongs the service life of the ESC.

HobbyWing Skywalker Series Features:
High Quality & Reliability
Programmable Parameters
Multiple Protections

Spec Check:
Brushed/Brushless: Brushless
Cont./Peak Current: 80A/100A
Input: 2-6S LiPo
BEC Output: Switch Mode: 5V,5A
Input Wires: Red-12AWG-150mm*1, Black-12AWG-150mm*1
Output Wires:Black-14AWG-100mm*3
Input Connectors: No
Output Connectors: No
LED Program Card: Supported
WiFi Module: Not Supported
Size: 86.0x38.0x12.0mm
Weight: 82g


41.48€  Inc Tax
Hobbywing Platinum Pro 100A V3 ESC 2-6s, 10A BEC (HW30203900)

Hobbywing PLATINUM Pro 100A V3 Brushless ESC

New Design & Excellent Performance
New structure design combined with high-performance micro-processor guarantees users efficient heat dissipation, good compatibility (with various motors), high driving efficiency and much more.

Great Power Output
This Platinum 100A V3 ESC features a continuous current of 100A and a peak current of up to 150A guarantees users high and stable output at all times during the flight.

High Voltage Built-in BEC
The built-in switch mode BEC with adjustable voltage between 6.0V/7.4V/8.4V, can supply a continuous current of over 10A and a peak current of 25A can supply enough power for your servos to operate efficiently.

Efficient Heat-dissipating System
Besides the heatsink on Platinum 100A V3, an extra coolingfan is included in product box to maximize cooling performance (Users can mount it to the ESC heatsink if necessary).

Four Flight Modes & “Auto Restart” Function
This Platinum Pro 100A V3 ESC features “Fixed-wing/Helicopter (Linear Throttle), Helicopter (Elf Governor) and Helicopter (Store Governor)” four flight modes and “Auto Restart (Time)” function that guarantees users excellent speed-governing performance in Heli Governor mode and allows users to cut off output and restart the motor to avoiding possible crash caused by improper operation.

Multiple Protections
Multiple protection feature includes abnormal input voltage, ESC thermal protection, throttle signal loss (or Fail Safe), and low voltage cut off that effectively prolongs the service life of the ESC.

Specifications

Brushed/Brushless: Brushless
Cont./Peak Current: 100A/150A
Input: 2-6S LiPo
BEC Output: Switch Mode: 6V/7.4V/8.4V, 10Amp
Input Wires: Red-12AWG-150mm*1/Black-12AWG-150mm*1
Output Wires: Black-12AWG-100mm*3
Input Connectors: No
Output Connectors: 4mm Gold Connectors (Female)
Transmitter: Supported
LED Program Card: Not Supported
LED Program Box: Not Supported
LCD Program Box: Supported
WiFi Module: Supported
Firmware Upgrade: Supported
Size: 70x35x21mm
Weight: 104g

89.67€  Inc Tax
Hobbywing Skywalker 12A ESC 2-3s, 2A BEC (HW80060170)
HOBBYWING SKYWALKER 12AE SPEED CONTROLLER

Good quality components guarantees the high quality and reliability of SkyWalker series of aircraft ESCs. Multiple protection features include abnormal input voltage, ESC thermal, throttle signal loss (or Fail Safe), and low voltage cutoff effectively prolongs the service life of the ESC.

HobbyWing Skywalker Series Features:
High Quality & Reliability
Programmable Parameters
Multiple Protections

Spec Check:
Brushed/Brushless: Brushless
Cont./Peak Current: 12A/15A
Input: 2-3S LiPo
BEC Output: Linear mode:5V,2A
Input Wires: Red-20AWG-100mm*1, Black-20AWG-100mm*1
Output Wires:Black-20AWG-100mm*3
Input Connectors: No
Output Connecotors: No
LED Program Card: Supported
WiFi Module: Not Supported
Size: 38.0x18.0x7.0mm
Weight: 10g


12.81€  Inc Tax
Hobbywing Platinum Pro 60A ESC V4 3-6s, 7A BEC (HW30215100)

Hobbywing PLATINUM Pro 60A V4 Brushless ESC

Excellent Motor Governing Speed
High-performance 32-bit processor with a running frequency of 72MHz combined with advanced algorithm optimizes the speed governing. Together with the adjustable governor parameters guarantees every pilot a precise control experience

High Voltage Built-in BEC
The built-in switch mode BEC with an adjustable voltage range from 5V to 8V,a continuous current of over 7A and peak current of 18A can supply enough power for your servos to operate efficiently.

DEO Technology
The DEO (Driving Efficiency Optimization, or so called "Active Freewheeling") technology implemented in the ESC has multiple advantages. Quicker response to the throttle change. Higher driving efficiency, longer flight time. Lower ESC temperature and a more reliable operation.

Four Brake Modes
This Platinum 60A V4 ESC has “Brake Disabled, Normal Brake, Proportional Brake and Reverse Brake” four brake modes. The brake amount is adjustable in normal brake mode; in proportional brake mode, the brake force will be automatically allocated based on the position of the radio throttle stick; in reverse brake mode, the motor rotation can be changed via a spare transmitter channel.

Multiple Protections
Multiple protection features include,

  • ESC thermal, 
  • capacitor thermal (HOBBYWING-patented technology),
  • ESC overload,
  • throttle signal loss (or Fail Safe),
  • and low voltage cutoff effectively prolongs the service life of the ESC.

Other Features

A separate programming port for connecting the programmer on this ESC allows user to
  • Program ESC,
  • check flight data include minimum voltage, maximum temperature, standardized RPM
  • and speed curve (in Heli Governing Store mode) of the flight data recorded by the ESC,
  • Upgrade ESC firmware With a multifunction LCD program box or a Wi-Fi Module & our Apple/Android phone App.

Specifications
Brushed/Brushless: Brushless
Cont./Peak Current: 60A/80A
Input: 3-6S LiPo
BEC Output: Switch Mode:5-8V,7A
Input Wires: Red-14AWG-100mm*1/Black-14AWG-100mm*1
Output Wires: Black-14AWG-75mm*3
Input Connectors: No
Output Connectors: 3.5mm Gold Connectors (Female)
Transmitter: Not Supported
LED Program Card: Not Supported
LED Program Box: Not Supported
LCD Program Box: Supported
WiFi Module: Supported
Firmware Upgrade: Supported
Size: 48x30x15.5mm
Weight: 49g

69.54€  Inc Tax
Hobbywing Platinum HV 130A ESC V4 6-14s, OPTO (HW30209201)

Hobbywing PLATINUM HV 130A OPTO V4 Brushless ESC

Super Soft Start-up
Platinum V4 serial products allows the motor to start extremely smooth and avoids tail-drift issues that helicopters experience. The start-up time is adjustable from 8 to 25 seconds, this will definitely create a perfect starting point for every flight.

Excellent Motor Governing Speed
High-performance 32-bit processor with a running frequency of 72MHz combined with advanced algorithm optimizes the speed governing. Together with the adjustable governor parameters guarantees every pilot a precise control experience

Built-in Sparkproof Circuit
Built-in Arc proof circuit effectively eliminates Arc/Spark produced at the “powering-on” moment and prolongs the connectors‘ lifespan.

DEO Technology
The DEO (Driving Efficiency Optimization, or so called "Active Freewheeling") technology implemented in the ESC has multiple advantages. A very rapid response to throttle change. Higher driving efficiency, longer flight time. Lower ESC temperature and a much more reliable operation during flight.

Four Brake Modes
This Platinum HV 130A OPTO V4 ESC has “Brake Disabled, Normal Brake, Proportional  Brake and Reverse Brake” four brake modes. The brake amount is adjustable in  normal brake mode; in proportional brake mode, the brake force will be  automatically selected based on the position of the radio throttle stick; in reverse  brake mode, the motor rotation can be changed via a spare transmitter channel.

Multiple Protections
Multiple protection features include,

  • ESC thermal, 
  • capacitor thermal (HOBBYWING-patented technology),
  • ESC overload,
  • throttle signal loss (or Fail Safe),
  • and low voltage cutoff effectively prolongs the service life of the ESC.

Other Features

A separate programming port for connecting the programmer on this ESC allows user to
  • Program ESC,
  • check flight data include minimum voltage, maximum temperature, standardized RPM
  • and speed curve (in Heli Governing Store mode) of the flight data recorded by the ESC,
  • Upgrade ESC firmware With a multifunction LCD program box or a Wi-Fi Module & our Apple/Android phone App.

Specifications
Brushed/Brushless: Brushless
Cont./Peak Current: 130A/160A
Input: HV 6-14S LiPo
BEC Output: No
Input Wires: Red-12AWG-150mm*1/Black-12AWG-150mm*1
Output Wires: Black-12AWG-100mm*3
Input Connectors: No
Output Connectors: No
Transmitter: Not Supported
LED Program Card: Not Supported
LED Program Box: Not Supported
LCD Program Box: Supported
WiFi Module: Supported
Firmware Upgrade: Supported
Size: 101.0x45.5x27.0mm
Weight: 154g

249.49€  Inc Tax
Hobbywing LED Program Card (Skywalker, FlyFun) (HW86020041)
Hobbywing LED Program Card (Skywalker, FlyFun)

Overview:
This program card is for programming HobbyWing brushless aircraft ESCs.

It works with the following HobbyWing products:
FlyFun series, SkyWalker series, Guard series (discontinued), and Sword series (discontinued) of brushless aircraft.
Note: this program card doesn’t work with Platinum series of brushless aircraft ESCs.

Specifications:
Size:88x58x14mm
Weight : 40g
Input Voltage : 4.8V—6.0V (a separate battery is needed for powering this program box when ESC has no BEC)

12.81€  Inc Tax
Hobbywing Multifunction LCD Program Box (Xerun, Ezrun and Platinum) (HW30502000)
Overview
This multifunction program box is for programming HobbyWing brushless ESCs. Its friendly LCD interface makes ESC programming easy and quick. With a PC, you can upgrade ESC firmware and further adjust ESC parameters online. Besides, it’s compact, portable and very applicable for field use.

This multifunction LCD program box is applicable for the following HobbyWing products:
Platinum series of brushless aircraft ESCs, XeRun series  &EzRun series of brushless car ESCs, Seaking Pro series of brushless boat ESCs

Specifications
Size:91x51x17mm(LxWxH)
Weight:65g
Input Voltage: 4.5V—12.6V (a separate battery is needed for powering this program box when ESC has no built-in/external BEC)
Interface: Micro USB, ESC interface (Futaba plug), Power supply interface (Futaba plug)

29.89€  Inc Tax
Hobbywing LED Program Box (Xerun, Ezrun, Seaking, FlyFun, QuickRun) (HW30501003)


Overview:
This LED program box is for programming HobbyWing brushless ESCs. Its friendly interface makes ESC programming easy and quick. It’s compact, portable and very applicable for field use.

It works with the following HobbyWing products:
1. Platinum V1/V2 series & FlyFun V5 series of brushless aircraft ESCs.
2. XeRun series, EzRun series & QuicRun series of brushless car ESCs.
3. SeaKing series of brushless boat ESCs.

Specifications:
Size:88x58x14mm
Weight:40g
Input Voltage: 4.8V-8.4V (a separate battery is needed for powering this program box when ESC has no BEC)

12.81€  Inc Tax
RCE-BL25A Brushless ESC 25A (HES02501)
• BEC output voltage(6~7.4V) to show great performance on the torque & speed of servo.
• BEC output utilizing switching power system,suitable for 3S~6S Li battery, with continuous current rating of 3A, and burst rating of 7A.
• Three programmable throttle speed settings to support quick throttle response.
• Govener Mode (governor speed controller slow down system).
• Small and compact PCB design for ease of installation.
• Large heatsink for great thermal performance.
• High compatibility to work with 98% brushless motors in the market.
• Ultra smooth motor start design to run with all kinds of brushless motors.
• The power inlet adapts Japanese made "Low ESR" capacitor in order to provide stable power source.
• The BEC power outlet adapts a Japanese made specialty polymer aluminum electrolytic capacitor. It provides better noise filtering capability than other BL ESC in the market, and moreover to give more stable performanceof R/C receiver and BEC.
• Users can use the transmitter to operate the motor setting by Super stylized CPU.
• If the aircraft should land or crash in an unexpected location and become lost, the pilot can enable the Aircraft Locator Option. The Aircraft Locator Option is engaged by tuming off the transmitter. When the ESC does not receive a signal from the transmitter for 30 seconds, it will start to send an alarm to the motor. The sound of the alarm will aid the pilot to locate the aircraft. This option will not work with a PCM receiver that has SAVE function enabled, or with low noise resistant PM receivers.

Specifications
Continuous current: 25A
Surge current: 40A (for 15seconds)
Supporting motor types: 2 poles to 10+poles in/outrunner brushless motors
Supporting maximum RPM: 2poles=>190,000rpm, 6poles=>63,000rpm
Supporting input voltage: 11.1V to 22.2V
Supporting battery types: Li-Ion / Li-Po 3-6 cells
BEC output: 6.0V - 7.4V, 3A (Burst 7A)
Size: 47x22x10mm
Weight: 27g

Content
• 1x RCM-BL300MX Brushless Motor 3700KV
• 2x Socket Screw (M2.5x6mm)
• 3x ALIGN standard 3.5mm gilt terminal



41.48€  Inc Tax
Hobbywing Skywalker 50A ESC 2-4s, 5A UBEC (HW30216000)

HOBBYWING SKYWALKER 50A-UBEC (NEW VERSION WITH 5A BEC) SPEED CONTROLLER

Good quality components guarantees the high quality and reliability of SkyWalker series of aircraft ESCs. Multiple protection features include abnormal input voltage, ESC thermal protection, throttle signal loss (or Fail Safe), and low voltage cutoff effectively prolongs the service life of the ESC.

HobbyWing Skywalker Series Features:
High Quality & Reliability
Programmable Parameters
Multiple Protections

Spec Check:
Brushed/Brushless: Brushless
Cont./Peak Current: 50A/65A
Input: 2-4S LiPo
BEC Output: Switch Mode:5V,5A
Input Wires: Red-14AWG-100mm*1, Black-14AWG-100mm*1
Output Wires:Black-14AWG-75mm*3
Input Connectors: 3.5 Gold Connectors (Female)
Output Connecotors: No
LED Program Card: Supported
WiFi Module: Not Supported
Size: 65.0x25.0x12.0mm
Weight: 43g


19.52€  Inc Tax
Hobbywing Platinum Pro 25A ESC V4 3-6s, 3A BEC (HW30204200)

Hobbywing PLATINUM 25A V4 Brushless ESC

Excellent Motor Governing Speed
High-performance 32-bit processor with a running frequency of 72MHz combined with advanced algorithm optimizes the speed governing. Together with the adjustable governor parameters guarantees every pilot a precise control experience

High Voltage Built-in BEC
The built-in switch mode BEC with an adjustable voltage (6V/7.4V for the Platinum 25A V4, 5V~8V with the step of 0.1V for the Platinum 40A V4), a continuous current of over 3A/7A (3A for the Platinum 25A V4, 7A for the Platinum 40A V4) and a peak current of 7A/18A (7A for the Platinum 25A V4, 18A for the Platinum 40A V4) can supply enough power for your servos to operate efficiently.

DEO Technology
The DEO (Driving Efficiency Optimization, or so called "Active Freewheeling") technology implemented in the ESC has multiple advantages. Quicker response to the throttle change. Higher driving efficiency, longer flight time. Lower ESC temperature and a more reliable operation.

Reverse Brake
With the Reverse Brake mode enabled when landing can effectively shorten the sliding distance of the fixed-wing aircraft to simulate the landing of a real aircraft (within a super short distance). The Normal Brake Mode, Proportional Brake mode, and Brake Disabled mode are also available; the brake amount is adjustable in normal brake mode while in proportional brake mode, the brake force will be automatically allotted on the basis of the position of radio throttle stick.


Multiple Protections
Multiple protection features include,
  • ESC thermal, 
  • capacitor thermal (HOBBYWING-patented technology),
  • ESC overload,
  • throttle signal loss (or Fail Safe),
  • and low voltage cutoff effectively prolongs the service life of the ESC.

Other Features

A separate programming port for connecting the programmer on this ESC allows user to
  • Program ESC,
  • check flight data include minimum voltage, maximum temperature, standardized RPM
  • and speed curve (in Heli Governing Store mode) of the flight data recorded by the ESC,
  • Upgrade ESC firmware With a multifunction LCD program box or a Wi-Fi Module & our
  • Apple/Android phone App.

Specifications
Brushed/Brushless: Brushless
Cont./Peak Current: 25A/40A
Input: 3-6S LiPo
BEC Output: Switch Mode:6V/7.4V,3A
Input Wires: Red-16AWG-100mm*1/Black-16AWG-100mm*1
Output Wires: Black-18AWG-100mm*3
Input Connectors: No
Output Connectors: 3.5mm Gold Connectors (Female)
Transmitter: Not Supported
LED Program Card: Not Supported
LED Program Box: Not Supported
LCD Program Box: Supported
WiFi Module: Supported
Firmware Upgrade: Supported
Size: 47x22x10mm
Weight: 27g

34.89€  Inc Tax
Hobbywing Platinum Pro 40A ESC V4 3-4s, 7A BEC (HW30215001)

Hobbywing PLATINUM Pro 40A V4 Brushless ESC

Excellent Motor Governing Speed
High-performance 32-bit processor with a running frequency of 72MHz combined with advanced algorithm optimizes the speed governing. Together with the adjustable governor parameters guarantees every pilot a precise control experience

High Voltage Built-in BEC
The built-in switch mode BEC with an adjustable voltage (6V/7.4V for the Platinum 25A V4, 5V~8V with the step of 0.1V for the Platinum 40A V4), a continuous current of over 3A/7A (3A for the Platinum 25A V4, 7A for the Platinum 40A V4) and a peak current of 7A/18A (7A for the Platinum 25A V4, 18A for the Platinum 40A V4) can supply enough power for your servos to operate efficiently.

DEO Technology
The DEO (Driving Efficiency Optimization, or so called "Active Freewheeling") technology implemented in the ESC has multiple advantages. Quicker response to the throttle change. Higher driving efficiency, longer flight time. Lower ESC temperature and a more reliable operation.

Reverse Brake
With the Reverse Brake mode enabled when landing can effectively shorten the sliding distance of the fixed-wing aircraft to simulate the landing of a real aircraft (within a super short distance). The Normal Brake Mode, Proportional Brake mode, and Brake Disabled mode are also available; the brake amount is adjustable in normal brake mode while in proportional brake mode, the brake force will be automatically allotted on the basis of the position of radio throttle stick.


Multiple Protections
Multiple protection features include,
  • ESC thermal, 
  • capacitor thermal (HOBBYWING-patented technology),
  • ESC overload,
  • throttle signal loss (or Fail Safe),
  • and low voltage cutoff effectively prolongs the service life of the ESC.

Other Features

A separate programming port for connecting the programmer on this ESC allows user to
  • Program ESC,
  • check flight data include minimum voltage, maximum temperature, standardized RPM
  • and speed curve (in Heli Governing Store mode) of the flight data recorded by the ESC,
  • Upgrade ESC firmware With a multifunction LCD program box or a Wi-Fi Module & our
  • Apple/Android phone App.

Specifications
Brushed/Brushless: Brushless
Cont./Peak Current: 40A/60A
Input: 3-4S LiPo
BEC Output: Switch Mode:5-8V,7A
Input Wires: Red-14AWG-100mm*1/Black-14AWG-100mm*1
Output Wires: Black-16AWG-75mm*3
Input Connectors: No
Output Connectors: 3.5mm Gold Connectors (Female)
Transmitter: Not Supported
LED Program Card: Not Supported
LED Program Box: Not Supported
LCD Program Box: Supported
WiFi Module: Supported
Firmware Upgrade: Supported
Size: 48x30x15mm
Weight: 47g

49.41€  Inc Tax
Hobbywing Platinum Pro 80A ESC V4 3-6s, 10A BEC (HW30203200)

Hobbywing PLATINUM Pro 80A V4 Brushless ESC

Super Soft Start-up
Platinum V4 serial products allows the motor to start extremely smooth and avoids tail-drift issues that helicopters experience. The start-up time is adjustable from 8 to 25 seconds, this will definitely create a perfect starting point for every flight.

Excellent Motor Governing Speed
High-performance 32-bit processor with a running frequency of 72MHz combined with advanced algorithm optimizes the speed governing. Together with the adjustable governor parameters guarantees every pilot a precise control experience

High Voltage Built-in BEC
The built-in switch mode BEC with an adjustable voltage range from 5V to 8V, a continuous current of over 10A and peak current of 25A can supply enough power for your HV servos to operate at their peak.

DEO Technology
The DEO (Driving Efficiency Optimization, or so called "Active Freewheeling") technology implemented in the ESC has multiple advantages. A very rapid response to throttle change. Higher driving efficiency, longer flight time. Lower ESC temperature and a much more reliable operation during flight.

Four Brake Modes
This Platinum 80A V4 ESC has “Brake Disabled, Normal Brake, Proportional Brake and Reverse Brake” four brake modes. The brake amount is adjustable in normal brake mode; in proportional brake mode, the brake force will be automatically selected based on the position of the radio throttle stick; in reverse brake mode, the motor rotation can be changed via a spare transmitter channel.

Multiple Protections
Multiple protection features include,

  • ESC thermal, 
  • capacitor thermal (HOBBYWING-patented technology),
  • ESC overload,
  • throttle signal loss (or Fail Safe),
  • and low voltage cutoff effectively prolongs the service life of the ESC.

Other Features

A separate programming port for connecting the programmer on this ESC allows user to
  • Program ESC,
  • check flight data include minimum voltage, maximum temperature, standardized RPM
  • and speed curve (in Heli Governing Store mode) of the flight data recorded by the ESC,
  • Upgrade ESC firmware With a multifunction LCD program box or a Wi-Fi Module & our Apple/Android phone App.

Specifications
Brushed/Brushless: Brushless
Cont./Peak Current: 80A/100A
Input: 3-6S LiPo
BEC Output: Switch Mode:5-8V,10A
Input Wires: Red-12AWG-150mm*1/Black-12AWG-150mm*1
Output Wires: Black-12AWG-100mm*3
Input Connectors: No
Output Connectors: 4.0mm Gold Connectors (Female)
Transmitter: Not Supported
LED Program Card: Not Supported
LED Program Box: Not Supported
LCD Program Box: Supported
WiFi Module: Supported
Firmware Upgrade: Supported
Size: 84.3x38.2x20.4mm
Weight: 97g

99.43€  Inc Tax
Hobbywing Platinum Pro 120A ESC V4 3-6s, 10A BEC (HW30203401)

Hobbywing PLATINUM Pro 120A V4 Brushless ESC

Super Soft Start-up
Platinum V4 serial products allows the motor to start extremely smooth and avoids tail-drift issues that helicopters experience. The start-up time is adjustable from 8 to 25 seconds, this will definitely create a perfect starting point for every flight.

Excellent Motor Governing Speed
High-performance 32-bit processor with a running frequency of 72MHz combined with advanced algorithm optimizes the speed governing. Together with the adjustable governor parameters guarantees every pilot a precise control experience

High Voltage Built-in BEC
The built-in switch mode BEC with an adjustable voltage range from 5V to 8V, a continuous current of over 10A and peak current of 25A can supply enough power for your HV servos to operate at their peak.

DEO Technology
The DEO (Driving Efficiency Optimization, or so called "Active Freewheeling") technology implemented in the ESC has multiple advantages. A very rapid response to throttle change. Higher driving efficiency, longer flight time. Lower ESC temperature and a much more reliable operation during flight.

Four Brake Modes
This Platinum 120A V4 ESC has “Brake Disabled, Normal Brake, Proportional Brake and Reverse Brake” four brake modes. The brake amount is adjustable in normal brake mode; in proportional brake mode, the brake force will be automatically selected based on the position of the radio throttle stick; in reverse brake mode, the motor rotation can be changed via a spare transmitter channel.

Multiple Protections
Multiple protection features include,

  • ESC thermal, 
  • capacitor thermal (HOBBYWING-patented technology),
  • ESC overload,
  • throttle signal loss (or Fail Safe),
  • and low voltage cutoff effectively prolongs the service life of the ESC.

Other Features

A separate programming port for connecting the programmer on this ESC allows user to
  • Program ESC,
  • check flight data include minimum voltage, maximum temperature, standardized RPM
  • and speed curve (in Heli Governing Store mode) of the flight data recorded by the ESC,
  • Upgrade ESC firmware With a multifunction LCD program box or a Wi-Fi Module & our Apple/Android phone App.

Specifications
Brushed/Brushless: Brushless
Cont./Peak Current: 120A/150A
Input: 3-6S LiPo
BEC Output: Switch Mode:5-8V,10A
Input Wires: Red-12AWG-150mm*1/Black-12AWG-150mm*1
Output Wires: Black-12AWG-100mm*3
Input Connectors: No
Output Connectors: 4.0mm Gold Connectors (Female)
Transmitter: Not Supported
LED Program Card: Not Supported
LED Program Box: Not Supported
LCD Program Box: Supported
WiFi Module: Supported
Firmware Upgrade: Supported
Size: 84.3x38.2x20.4mm
Weight: 107g

139.69€  Inc Tax
Hobbywing Platinum HV 130A ESC V4 6-14s, 10A BEC (HW30209200)

Hobbywing PLATINUM HV 130A V4 Brushless ESC, 10A BEC

Super Soft Start-up
Platinum V4 serial products allows the motor to start extremely smooth and avoids tail-drift issues that helicopters experience. The start-up time is adjustable from 8 to 25 seconds, this will definitely create a perfect starting point for every flight.

Excellent Motor Governing Speed
High-performance 32-bit processor with a running frequency of 72MHz combined with advanced algorithm optimizes the speed governing. Together with the adjustable governor parameters guarantees every pilot a precise control experience

High Voltage Built-in BEC
The built-in switch mode BEC with an adjustable voltage range from 5V to 8V, a continuous current of over 10A and peak current of 25A can supply enough power for your HV servos to operate at their peak.

Built-in Sparkproof Circuit
Built-in Arc proof circuit effectively eliminates Arc/Spark produced at the “powering-on” moment and prolongs the connectors‘ lifespan.

DEO Technology
The DEO (Driving Efficiency Optimization, or so called "Active Freewheeling") technology implemented in the ESC has multiple advantages. A very rapid response to throttle change. Higher driving efficiency, longer flight time. Lower ESC temperature and a much more reliable operation during flight.

Four Brake Modes
This Platinum HV 130A V4 ESC has “Brake Disabled, Normal Brake, Proportional Brake and Reverse Brake” four brake modes. The brake amount is adjustable in normal brake mode; in proportional brake mode, the brake force will be automatically selected based on the position of the radio throttle stick; in reverse brake mode, the motor rotation can be changed via a spare transmitter channel.

Multiple Protections
Multiple protection features include,

  • ESC thermal, 
  • capacitor thermal (HOBBYWING-patented technology),
  • ESC overload,
  • throttle signal loss (or Fail Safe),
  • and low voltage cutoff effectively prolongs the service life of the ESC.

Other Features

A separate programming port for connecting the programmer on this ESC allows user to
  • Program ESC,
  • check flight data include minimum voltage, maximum temperature, standardized RPM
  • and speed curve (in Heli Governing Store mode) of the flight data recorded by the ESC,
  • Upgrade ESC firmware With a multifunction LCD program box or a Wi-Fi Module & our Apple/Android phone App.

Specifications
Brushed/Brushless: Brushless
Cont./Peak Current: 130A/160A
Input: HV 6-14S LiPo
BEC Output: Switch Mode:5-8V,10A
Input Wires: Red-12AWG-150mm*1/Black-12AWG-150mm*1
Output Wires: Black-12AWG-100mm*3
Input Connectors: No
Output Connectors: No
Transmitter: Not Supported
LED Program Card: Not Supported
LED Program Box: Not Supported
LCD Program Box: Supported
WiFi Module: Supported
Firmware Upgrade: Supported
Size: 101.0x45.5x27.0mm
Weight: 169g

329.40€  Inc Tax
Hobbywing Platinum HV 200A ESC V4 6-14s, 10A BEC (HW30209101)

Hobbywing PLATINUM HV 200A V4 Brushless ESC, 10A BEC

Exquisite Design & Quality Components

The elegant cases are made by Aluminum. Top level components combined with the exquisite industrial design guarantee the Platinum HV 200A SBEC V4.1 ESC the unmatchable quality & look.

Integrated Heat-dissipation Structure
The improved structure solves the heat-dissipation problem of the “Sandwich” stacking circuit board. The appropriate circuit distribution allows all components on both sides of circuit boards to quickly conduct heat to the Aluminum cases. The way of heat dissipation maximizes the cooling and guarantees the Platinum HV 200A SBEC V4.1 ESC always operates in cool & stable condition.

Platinum HV 200A SBEC V4.1 (New) Way of Heat Dissipation
● The power board dissipates heat via the Aluminum upper & medial cases;
● The control board dissipates heat via those holes on the medial case;
● The BEC circuit board (at the bottom) dissipates heat via the Aluminum lower case.

Excellent Speed-governing
High-performance 32-bit processor combined with advanced algorithm makes the speed-governing excellent for different conditions. With the adjustable sensitivity of speed-governing, every pilot can find the most suitable settings for his helicopter.

Super Backflow-proof Switch-mode BEC
The built-in switch-mode BEC with continuously adjustable output voltage range from 5V to 8V (step: 0.1V) supports connecting a 2S backup battery (to the connection) in parallel for improving the safety and reliability, its backflow-proof circuit prevents the voltage (which is higher than the BEC voltage) from the servo or backup battery from flowing back to the BEC. The addition of buffer enhances the output of high peak current to make the servo response more precise and quick.

Intelligent and Variable Frequency Soft-start Technology
Based on the original super soft-start technology, the intelligent and variable frequency soft-start technology combined with the adjustable throttle response time guarantees motors ultra-soft and smooth start and ZERO blade-drift issues of helicopter, this definitely creates a perfect starting for every flight.

Built-in Spark-proof Circuit
The built-in spark-proof circuit effectively eliminates bthe sparks produced when the ESC is powered on and extends the service life of connectors.

Specifications
Brushed/Brushless: Brushless
Cont./Peak Current: 200A/300A
Input: HV 6-14S LiPo
BEC Output: Switch Mode:5-8V,10A
Input Wires: Red-8AWG-150mm*1/Black-8AWG-150mm*1
Output Wires: Black-10AWG-150mm*3
Input Connectors: No
Output Connectors: No
Transmitter: Not Supported
LED Program Card: Not Supported
LED Program Box: Not Supported
LCD Program Box: Supported
WiFi Module: Supported
Firmware Upgrade: Supported
Size: 105.0x50.0x36.0mm
Weight: 325g



439.20€  Inc Tax
Hobbywing Platinum HV 200A ESC V4 6-14s, OPTO (HW30209102)

Hobbywing PLATINUM HV 200A V4 Brushless ESC, OPTO

Exquisite Design & Quality Components

The elegant cases are made by Aluminum. Top level components combined with the exquisite industrial design guarantee the Platinum HV 200A OPTO V4.1 ESC the unmatchable quality & look.

Integrated Heat-dissipation Structure
The improved structure solves the heat-dissipation problem of the “Sandwich” stacking circuit board. The appropriate circuit distribution allows all components on both sides of circuit boards to quickly conduct heat to the Aluminum cases. The way of heat dissipation maximizes the cooling and guarantees the Platinum HV 200A OPTO V4.1 ESC always operates in cool & stable condition.

Platinum HV 200A OPTO V4.1 (New) Way of Heat Dissipation
● The power board dissipates heat via the Aluminum upper & medial cases;
● The control board dissipates heat via those holes on the medial case;
● The circuit board (at the bottom) dissipates heat via the Aluminum lower case.

Excellent Speed-governing
High-performance 32-bit processor combined with advanced algorithm makes the speed-governing excellent for different conditions. With the adjustable sensitivity of speed-governing, every pilot can find the most suitable settings for his helicopter.

Intelligent and Variable Frequency Soft-start Technology
Based on the original super soft-start technology, the intelligent and variable frequency soft-start technology combined with the adjustable throttle response time guarantees motors ultra-soft and smooth start and ZERO blade-drift issues of helicopter, this definitely creates a perfect starting for every flight.

Built-in Spark-proof Circuit
The built-in spark-proof circuit effectively eliminates bthe sparks produced when the ESC is powered on and extends the service life of connectors.

Specifications
Brushed/Brushless: Brushless
Cont./Peak Current: 200A/300A
Input: HV 6-14S LiPo
BEC Output: NO
Input Wires: Red-8AWG-150mm*1/Black-8AWG-150mm*1
Output Wires: Black-10AWG-150mm*3
Input Connectors: No
Output Connectors: No
Transmitter: Not Supported
LED Program Card: Not Supported
LED Program Box: Not Supported
LCD Program Box: Supported
WiFi Module: Supported
Firmware Upgrade: Supported
Size: 105.0x50.0x36.0mm
Weight: 325g

399.55€  Inc Tax
Hobbywing Seaking 180A V3 3-6S Boat ESC System, 5A BEC (HW30302401)
Hobbywing Seaking 180A V3 3-6S Boat ESC System, 5A BEC

Performance & Reliability
Built with high-quality components and coupled with cutting-edge firmware, the Seaking 180A V3 is featured by unmatched performance and reliability. Multiple safety adjustable options are in use, with the implementation of the low-voltage cutoff protection, thermal protection and throttle signal loss protection.

Efficient Cooling System
The Hobbywing patented heat-conductive copper bar cover on the power board of the Seaking 180A V3 can efficiently and effectively transfer heat to the integrated CNC machined billet aluminum water cooled heat sink housing thus keeping your ESC as cool as possible.

Waterproof Design
100% waterproof without the need of extra protection.

Built-in BEC
The built-in switch mode BEC with a maximum output of 5A and voltage of 6V make this ESC compatible with high voltage servo.

Special Algorithm Design
The special algorithm implemented in the ESC make the acceleration more incredible and sailing more stable.

Separate PRG/FAN Port
The separate PRG/FAN port on the ESC can connect ESC to a program box (via the standard programming cable) and start ESC programming.

Specifications
Brushed/Brushless: Brushless
Waterproof: Yes
Cont./Peak Current: 180A/1080A
Input: 3-6S LiPo / 9-18 cells NiMh
BEC Output: Switch Mode: 6V, 5Amp
Input Wires: Red-10AWG-200mm*1/Black-10AWG-200mm*1
Output Wires: Black-10AWG-150mm*3
Input Connectors: No
Output Connectors: 6mm gold connectors (female)
Transmitter: Supported
LED Program Card: Not Supported
LED Program Box: Supported
LCD Program Box: Not Supported
WiFi Module: Not Supported
Firmware Upgrade: Not Supported
Size: 72x48x37mm
Weight: 207g
Cooling pipe: Ф3.0/5.4 mm
Application: Boat length <130cm

139.69€  Inc Tax
Hobbywing Seaking 130A HV V3 5-12S Boat ESC System (HW30301200)
Hobbywing Seaking 130A HV (high voltage) V3 5-12S Boat ESC System (without BEC)

Performance & Reliability
Built with high-quality components and coupled with cutting-edge firmware, the Seaking 130A V3 is featured by unmatched performance and reliability. Multiple safety adjustable options are in use, with the implementation of the low-voltage cutoff protection, thermal protection and throttle signal loss protection.

Efficient Cooling System
The Hobbywing patented heat-conductive copper bar cover on the power board of the Seaking 130A V3 can efficiently and effectively transfer heat to the integrated CNC machined billet aluminum water cooled heat sink housing thus keeping your ESC as cool as possible.

Waterproof Design
100% waterproof without the need of extra protection.

Special Algorithm Design
The special algorithm implemented in the ESC make the acceleration more incredible and sailing more stable.

Separate PRG/FAN Port
The separate PRG/FAN port on the ESC can connect ESC to a program box (via the standard programming cable) and start ESC programming.

Specifications
Brushed/Brushless: Brushless
Waterproof: Yes
Cont./Peak Current: 130A/720A
Input: 5-12S LiPo / 15-36 cells NiMh
BEC Output: (without BEC)
Input Wires: Red-10AWG-200mm*1/Black-10AWG-200mm*1
Output Wires: Black-12AWG-100mm*3
Input Connectors: No
Output Connectors: No
Transmitter: Supported
LED Program Card: Not Supported
LED Program Box: Supported
LCD Program Box: Not Supported
WiFi Module: Not Supported
Firmware Upgrade: Not Supported
Size: 88x58x23mm
Cooling pipe: Ф3.6/5.0 mm
Weight: 182g
Application: Boat length <150cm

199.47€  Inc Tax
Hobbywing Seaking 120A V3 2-6S Boat ESC System, 5A BEC (HW30302360)
Hobbywing Seaking 120A V3 2-6S Boat ESC System, 5A BEC

Performance & Reliability
Built with high-quality components and coupled with cutting-edge firmware, the Seaking 120A V3 is featured by unmatched performance and reliability. Multiple safety adjustable options are in use, with the implementation of the low-voltage cutoff protection, thermal protection and throttle signal loss protection.

Efficient Cooling System
The Hobbywing patented heat-conductive copper bar cover on the power board of the Seaking 120A V3 can efficiently and effectively transfer heat to the integrated CNC machined billet aluminum water cooled heat sink housing thus keeping your ESC as cool as possible.

Waterproof Design
100% waterproof without the need of extra protection.

Built-in BEC
The built-in switch mode BEC with a maximum output of 5A and voltage of 6V make this ESC compatible with high voltage servo.

Special Algorithm Design
The special algorithm implemented in the ESC make the acceleration more incredible and sailing more stable.

Separate PRG/FAN Port
The separate PRG/FAN port on the ESC can connect ESC to a program box (via the standard programming cable) and start ESC programming.

Specifications
Brushed/Brushless: Brushless
Waterproof: Yes
Cont./Peak Current: 120A/720A
Input: 2-6S LiPo / 6-18 cells NiMh
BEC Output: Switch Mode: 6V, 5Amp
Input Wires: Red-12AWG-200mm*1/Black-12AWG-200mm*1
Output Wires: Black-12AWG-150mm*3
Input Connectors: No
Output Connectors: 4mm gold connectors (female)
Transmitter prog.: Supported
LED Program Card: Not Supported
LED Program Box: Supported
LCD Program Box: Not Supported
WiFi Module: Not Supported
Firmware Upgrade: Not Supported
Size: 69x40x32mm
Cooling pipe: Ф3.0/5.4 mm
Weight: 150g
Application: Boat length <110cm

99.43€  Inc Tax
Hobbywing Seaking 60A V3.1 2-3S Boat ESC System, 3A BEC (HW30302200)
Hobbywing Seaking 60A V3.1 2-3S Boat ESC System, 3A BEC

Performance & Reliability
Built with high-quality components and coupled with cutting-edge firmware, the Seaking 60A V3.1 is featured by unmatched performance and reliability. Multiple safety adjustable options are in use, with the implementation of the low-voltage cutoff protection, thermal protection and throttle signal loss protection.

Efficient Cooling System
The Hobbywing patented heat-conductive copper bar cover on the power board of the Seaking 60A V3.1 can efficiently and effectively transfer heat to the integrated CNC machined billet aluminum water cooled heat sink housing thus keeping your ESC as cool as possible.

Waterproof Design
100% waterproof without the need of extra protection.

Built-in BEC
The built-in switch mode BEC with a maximum output of 3A and voltage of 6V make this ESC compatible with high voltage servo.

Special Algorithm Design
The special algorithm implemented in the ESC make the acceleration more incredible and sailing more stable.

Separate PRG/FAN Port
The separate PRG/FAN port on the ESC can connect ESC to a program box (via the standard programming cable) and start ESC programming.

Specifications
Brushed/Brushless: Brushless
Waterproof: Yes
Cont./Peak Current: 60A/360A
Input: 2-3S LiPo / 5-9 cells NiMh
BEC Output: Switch Mode: 6V, 3Amp
Input Wires: Red-14AWG-150mm*1/Black-14AWG-150mm*1
Output Wires: Black-14AWG-100mm*3
Input Connectors: No
Output Connectors: 4mm gold connectors (female)
Transmitter prog.: Supported
LED Program Card: Not Supported
LED Program Box: Supported
LCD Program Box: Not Supported
WiFi Module: Not Supported
Firmware Upgrade: Not Supported
Size: 61x39x26mm
Cooling pipe: Ф2.0/4.0 mm
Weight: 95g
Application: Boat length <70cm

79.91€  Inc Tax
Per Page      1 - 30 of 35