Airplanes

Sort By:  
Kyosho Calmato Alpha 60 SPORTS - (EP/GP) red (K.11238RB)
Kyosho Calmato Alpha 60 SPORTS - (Electric /Gas Powered) radio controlled airplane/trainer

Big airplane fits neatly into back of your car!
Separable fuselage and main wing make it easy to transport.
Choose between EP and GP versions.
Ideal introduction to real low wing flight.

Generally speaking, the larger an airplane is the more stable it flies through the air and therefore the easier it is for beginners to fly. However, the constraints of available flying space and transportation meant the choice of large airplanes for beginners was limited. With the Calmato Alpha 60 Sports, the steady flight of a large 60-class airplane provides an ideal introduction to low wing flight. In addition, the unique separable fuselage structure with removable tail plane and detachable main wing halves make transporting this airplane easy and convenient. The fuselage and main wing are easily separated and reassembled through an aluminum pipe that provides a simple yet high-precision structure with exceptional strength and rigidity. This produces reliability in control response for ideal stunt technique training for loops and rolls etc. For a large airplane the Calmato Alpha 60 Sports condenses down so neatly it can be stored in the trunk of a compact car with room to spare, even with the full set of equipment included. Employing a symmetrical airfoil, the large wing area combines with its light wing load to produce superior lift, which combines with the direct linear response to steering input of a large airplane to provide a superior introduction to low wing airplane flight. In addition, the choice of flying electric or gas engine is left with the owner and parts for both power trains are included. This ARF kit includes a fully factory assembled fuselage that is expertly covered in printed film and finished with detailed graphics as well as pilot figure and canopy. Motor mount, cowling for electric motor version, engine mount and silicone tubes, fuel tank, tires and linkage parts are all included and the high-precision construction can be completed in a short time with no gluing required. To experience the best of big scale flight with the flier-friendly characteristics of a 60-class, the Calmato Alpha 60 Sports is the ultimate choice.

Technical data
Length: 1600mm
Width: 1800mm
Weight : (EP) 3900g (GP) 3700g
Motor(EP): 800-1200W class backplate mounted outrunner brushless (sold separately)
Engine (GP): 2-cycle 60-65 class (sold separately)
Battery (EP): 14.8V 5000mAh Li-Po (sold separately)
Wing Area: 60.6dm2
Wing Load : 61.0-64.3g/dm2
Wing Type : Original semi-symmetrical
Propeller : D12xP6-D14xP8 (sold separately)

Required for operation
4ch (minimum), 5 servo + ESC(EP) or 6 servo(GP) RC system for airplane
800-1200W backplate mounted outrunner brushless motor (EP)
2 cycle 60-65 engine (GP)
D12xP6-D14xP8 propeller(EP), D12xP6-P8 propeller (GP)
100mm Y extension cord x 2 for aileron (EP/GP)
300mm extension cord x 2 for ailron (EP/GP)
500mm extension cord x 2 for rudder and elevator (EP/GP)
14.8V 4000-5000mAh Li-Po battery (EP)
Battery charger with Li-PO balance charging feature (EP)
Fuel, engine starting tool (GP)
Battery for receiver (EP/GP)
52-70mm spinner (EP/GP)

269.62€  Inc Tax
Multiplex ParkMaster PRO Kit 975mm (1M401077)
Multiplex Park Master Pro

The MULTIPLEX PARK MASTER PRO is the true champion for the toughest flight maneuvers. Through the use of square carbon fiber bars has now an unbeatably high rigidity of the fuselage, the wings and the elevator unit. Also the landing gear now comes with a carbon-fiber reinforcement. A newly constructed, reinforced motor mount is suitable for even more powerful drives and featuring the optional carbon motor frame becomes a real eye-catcher. You can use the Park Master PRO in a very confined space. Flying outdoors is easy even with a moderate winds.

Highlights & Details:
Carbon beams
Fully 3D-capable airplane 

Model type: Kit
Wingspan: 975 mm
Length: 1030 mm
Weight: 520 g
Steering: Elevator, Aileron, Rudder, Motor
Battery: 3S LiPo / 900 mAh
Model type: Aerobatics
Wing load: 18 g/dm²
Wing area: 29 dm²
Product type: radio controlled model aircraft

Features:
Carbon beams for highest rigidity in extreme flight figures
Enhanced engine support bracket
High strength carbon fiber chassis
Low minimum flying speed
Moulded parts made with ELAPOR®
Reinforced motor mount
Printed decal sheet

Box content:
Model aircraft
Small parts
User manual

119.56€  Inc Tax
Multiplex Indoor Extra 330SC 850mm (MPX1-00645)
MULTIPLEX Indoor-Extra 330SC red/silver

The Extra 330SC Indoor Edition gives you the perfect entry in to the world of 3D art flying. Designed by Gernot Bruckmann. A "must have" for all EXTRA and 3D fans. It comes in a red/silver livery. The EPP model is very robust and enables you to fly all figures of your imagination.

Delivery:
Color printed EPP parts
CFK supports and small parts inx. wheels
Small parts required for assembly
Detailed instructions.

Model type: Kit
Material: EPP
Wingspan: 850 mm
Weight: 175 g
Steering: Elevator, Alieron, Rudder, Motor
Battery: 2S LiPo
Model type: 3D aerobatics
Product type: RC model aircraft

59.78€  Inc Tax
Kyosho Calmato Alpha 40 SPORTS - Toughlon (Gas/Electric) (K.11257PB)
Ideal performer for low wing beginners to stunt training!
Designed for compatibility with both GP and EP flight!

When its time to graduate from a beginner trainer, the next step could be this stylish low wing sports plane. The option of either EP or GP in the CALMATO ALPHA 40 Sports allows you to choose your preferred power source. Both embody the definitive stability of the CALMATO series with optimal maneuverability allowing low wing airplane beginners to fly stunts like loops and rolls. In addition, this kit is factory assembled and expertly pre-covered in quality film with printed coloring and Kyosho’s comprehensive design and construction ensures no gluing is required. The main wing halves are joined with an aluminum pin and can be separated for compact and easy transport. Motor mount, engine mount, tires, spinner and linkage parts are all included. Only a few separate items are needed to get airborne so it’s easy to enjoy the sporty flight performance of this conveniently priced low wing airplane.


Technical Data:

■Length : 1,300mm
■Width: 1,600mm
■Weight : (EP) 2,650g (GP) 2,550g
■Motor(EP): 600-1000W class backplate mounted outrunner brushless (sold separately)
■Engine (GP): 2-cycle 40-46 class (sold separately)
■Battery (EP): 14.8V 4,000-5,000mAh Li-Po (sold separately)
■Wing Area: 44dm2
■Wing Load : 57.9-62.0g/dm2
■Wing Type : Original semi-symmetrical
■Propeller : D11xP7-D12xP8 (sold separately)


Required for operation:
●4ch, 4servo+ESC(EP) or 5 servo(GP) RC system for airplane
●600-1000W backplate mounted outrunner brushless motor(EP)
●2 cycle 40-46 engine(GP)
●D11xP7-D12xP8 propeller(EP/GP)
●100mm Y extension cord x 1 or aileron(EP/GP)
●200mm extension cord x 2 for aileron
(EP/GP)
●14.8V 4,000-5,000mAh Li-Po battery (Max Dimension: L150xW48xH58mm)(EP)
●Battery charger with Li-PO balance charging feature(EP)
●Fuel, engine starting tool(GP)
●Battery for receiver(EP/GP)
: If the battery cannot use the ESC BEC power, a separate Rx battery unit is required.(EP)
199.47€  Inc Tax
BETA Brushless Glider 1400 ARF - (1420mm) (4ST1479-ARF)
BETA 1400 ARF (almost ready to fly with brushless motor)

Great beginner radio control model airplane!

Almost finished motor glider made of almost indestructible extruded foam polypropylene (EPP). Takes only few minutes to complete the kit. 

Controls:
Rudder, Elevator and Ailerons

Specification:
Wingspan: 1420mm
Length: 940mm
Weight: 650-720g

Box content:
1x Beta 1400 ARF
1x brushless motor with propeller
1x ECS (electronic speed controller)
4x servos

Required for assembly:
1x Flight battery (LiPo 3S 1300 - 2200mAh)
1x Transmitter
1x Receiver
1x Battery charger

129.93€  Inc Tax
BETA Brushless Glider 1400 (Mode 2, RTF) - T8FB RadioLink FHSS Transmitter (4ST1479-M2)
BETA 1400 (brushless motor) Mode 2 - RTF with RadioLink T8FB 2.4GHz FHSS Transmitter

Great beginner RC model with included transmitter!

Almost finished RC motor glider model. Made of almost indestructible extruded foam polypropylene (EPP).

Controls:
Rudder, Elevator and Ailerons

Specification:
Wingspan: 1420mm
Length: 940mm
Weight: 650-720g


Comes as a complete RC Set with airplane including all electronics, transmitter, receiver, battery and charger.

179.95€  Inc Tax
Top RC Swift 1200mm EDF (4ST310)
Top RC Swift 1200mm EDF

Electric duct fan radio controlled airplane for high speed flying. Flying speed is up to 160km/h!

Features
With huge high-strength carbon fiber tubes and high-density EPO material, suitable for the high-speed flying.
With simple and smooth shape & slender body, it will reduce the resistance during the high-speed flying, which will bring you ultimate flight experience.
Removable wing and tail halves, easy to assemble.
Removable canopy and big size of battery hatch.
Unique hidden pushrod design makes the aircraft more simple and nice.
With the protection of landing skid and spoilers, it can take off or land from the road without any damage.
With a perfect design of heat dissipation holes, the motor, ESC and battery will be cooled fully during the high-speed flying.

Technical data
Length: 1024mm
Width: 1200mm
Weight : 950g
Motor/EDF: TOP2830b-3850kV
ESC: 40A
Servo: 4 x 9g digital metal gear

Required for operation
Transmitter: 4ch (minimum)
Receiver: 4ch (minimum)
Flight Battery: 4S 2200mAh 25C
Battery Charger

159.82€  Inc Tax
Black Horse Super Decathlon (BH150) 2450mm ARF (BH150)
Black Horse Model SUPER DECATHLON
Item code: BH150.

High quality Big Scale radio controlled model airplane with detailed cockpit that comes in ARF (almost ready to fly) version.

SPECIFICATION:
– Wingspan: 2,450 mm (96")
– Length: 1,750 mm
– Weight: 7.5 kg
– Wing area: 97 dm2.
– Wing loading: 77 g/dm2.
– Wing type: Naca Airfoil.
– Spinner: 86mm.
– Gear type: Aluminium Hi-grade for main wheel and tail gear (included).

Parts listing required (not included):
– Engine: O.S GT 33 cc Gas or DLA 32 cc
– Radio: 5 channels.
– Servo: 6 standard high torque servos,
standard size (40 x 20 x 38)mm.

ALL BALSA – PLY WOOD CONSTRUCTION.
COVERED WITH ORACOVER

749.69€  Inc Tax
Pilot-RC Laser 73" (1850mm) - white/red/black (4ST1973L-WB)
Pilot-RC Laser - radio controlled 3D airplane model (white, red and black paint scheme)

It has arrived! The 30cc version of Pilot-RC rule changing Laser 73" (1850mm)!

Fully designed from the ground up for out and out performance, keeping in line with current demand for faster, more aggressive and more agile models, while still keeping the well known great flying characteristics of Pilot-RC models.

Check the videos in our Video tab to see this model in action to fully understand its capability. Its not a question if the plane is quick enough, its whether you can keep up with it!

Specification:
Model: Laser
Wingspan: 1.850mm (73″)
Length: 1.760mm
Weight: 5.2kg

Features:
NEW! Hybrid construction from wood and composite materials for specially reinforced fuselage and wings.
NEW! Patented quick assembly system for wings.
NEW! Patented quick assembly system for canopy. Especially useful for electric version, fast battery change!
Genuine German Oracover (Ultracote) covering
Highly prefabricated, experienced builders can have it air ready in under a day
Pre-installed hinges (glued and pinned)
Easy canister installation due to open construction
Removable wings
Laser engraved motor mounting position
Pull-Pull system for Rudder servo
Cowl fits both gasoline and electric motors
Can use single elevator servo, or choose to split the elevator half and use two separate servos.
Designed for both single cylinder and twin cylinder engines!

Included hardware:
Complete air frame with all basic accessories (such as carbon fibre main undercarriage, tail-gear assembly and wing-tubes as well as fiberglass control horns and wheel pants)
Pre-installed hinges and pre-mounted canopy
Fuel tank and fuel tubing pre-installed, fuel dot and breather valve
Wheels, axels and wheel pants
Pre-prepared pull-pull wires and pushrods with ball links
Matching carbon spinner

Required hardware:
Motor: 30-40cc or equivalent electric (Recomended O.S. Engines Gasoline Engine GT33)

Servos: 4 or 5 high torque (minimum 20kg) plus throttle servo
(uses x1 per aileron, x1 or x2 (optional) for the elevator and x1 on rudder)

Also requires all the usual accessories such as transmitter, receiver, propeller, batteries, extension leads and possibly other small accessories.

699.06€  Inc Tax
Extreme Flight 60" Extra 300 EXP V2 - 1.52m (A232V2OB)
60" Extra 300 EXP V2 orange/blue/white

The new Extreme Flight V2 Extra 300EXP is here! Incorporating all of the latest design updates from our most recent releases, this airplane radio controlled model loaded with composites and is stronger and lighter! New updates include a self-aligning stab assembly which greatly simplifies the assembly of the Extra, super strong carbon U-channel landing gear mount, composite laminated plywood and balsa fuselage construction and 2 high visibility standard (non-printed) Oracover color schemes. The Extra can easily be assembled and ready to fly in a single evening session by an experienced hobbyists.

Specifications:
Wingspan: 152cm (60")
Length: 149cm (58.5")
Wing Area: 705 sq. in.
Weight: 2 to 3 kg depending on the set up

Recomended Power System:
Foxy G2 Brushless motor C4125-400kv

Hobbywing Skywalker 80A ESC 2-6s / Hobbywing Platinum Pro 100A V3 ESC 2-6s

Propeller: 16x7

Spinner: EF Cyclone 63mm (included)

Radio: Spektrum / Futaba / Graupner / ..

Receiver: Minimum 4 ch. receiver RX (AR410/AR620/AR630/..)

Battery: 6S 3300 - 4000mAh LiPo

Recomended Servos:
4 pcs. Savox SV-1250MG /..

449.57€  Inc Tax
Flite Test Mighty Mini Corsair 609mm Foam Kit (FT4109)
Flite Test Mighty Mini Corsair
Now made with the new Maker Foam the Flite Test Mighty Mini Corsair is an even better plane to get your hands on! The plane is one you have to see for yourself to believe and we couldn't be happier with it!

This little Warbird park flyer is the perfect size to always keep with you in the back seat of your car and is small enough to fly at most medium sized parks. Though this little Corsair doesn't have the 2,000 HP Pratt & Whitney R-2800 radial engine that the original full-scale warbird had, it does use a 2204 sized brushless motor that is commonly found on mini race quads. This gives this little 4 channel plane enough power to climb vertically endlessly and pull off most basic aerobatic maneuvers with ease.

Power Pack Compatibility:
Flite Test Airplanes are all designed around the use of various "Power Packs" which include an inexpensive Motor, ESC, Servo, & accessory package to complete each aircraft! The compatible power pack is listed below.
Power Pack A - Great lower power option for easier control.
Power Pack F - Improved output power for faster speeds and advanced flyers.

Maker Foam Features:
White color is much easier to add a simple trim scheme using stickers or pinstripes
Translucent allowing models to be creatively lit from within
Takes paint or decals extremely well
More durable than previous Flite Test foam products

Specifications:
Weight: 155g (fully assembled; without battery)
Wingspan: 609mm
Center of Gravity: 25mm from leading edge of wing (recommended)
Control Surface Throws: 12 degrees
Expo Suggestions: 30%

24.40€  Inc Tax
Graupner Su-26 HoTT RC Electro Airplane Model - 410mm (9905.HOTT)
Graupner Su-26 HoTT Radio Controlled (RC) Electro Airplane Model

New Graupner semi-scale model Su-26 HoTT. Equipped with a high-quality GRAUPNER/SJ GR-12S HoTT receiver.
Although the model is very lightweight, it can be operated outdoors. It is very easy to fly.

Features
Equipped with high-quality Graupner GR-12S HoTT receiver
Ready to fly once taken out of the package
Removable main landing gear and tailwheel equipped with soft rubber wheels
Package with charging station and 1S LiPo battery 3.7 V 150 mAh (included)
4 (AA) Mignon dry cell batteries included for the charging station (included)
Detailed operating instructions

Specification
Weight: 45 g
Length: 360 mm
Wingspan: 410 mm

69.54€  Inc Tax
Graupner Ski Set (for Husky 1800S) (13410.43)
Graupner Ski Set for Husky 1800S

Can be used on a similar sized radio controlled model airplanes with approx. 1800mm wingspan.

Length: 330mm
Width: 65mm
Height: 40mm
Weight: 330g

(only ski set, RC model airplane not included)

14.64€  Inc Tax
Phoenix Model Slick 580 (PH190) EP/GP .120 or 20cc 1700mm ARF (PH190)
Phoenix Model Slick 580 (PH190) GP/EP 20cc 1700mm ARF (almost ready to fly)

Scale aerobatic radio controlled airplane model capable of precise and extreme 3D aerobatics.

Technical data:
- Wingspan: 1700mm (67 in)
- Length: 1552mm (61.1 in)
- Flying weight: 4400-4600 gr
- Wing area: 60 dm2
- Wing loading: 80g/dm2
- Wing type: Naca airfoils
- Covering type: Genuine ORACOVER®
- Gear type: Aluminum Hi-grade for main gear and spring wire for tail gear (included)
- Spinner size: Plastic 80mm (included)
- Radio: 4 channel minimum (not included)
- Servo: 5 standard hitorque servo: 2 aileron; 1 elevator; 1 rudder; 1 throttle (not included)
- Propeller: suit with your engine
- Engine: .120 / 2-stroke glow engine or 20CC Gas engine (not included)
- Motor: brushless outrunner 2000-2400 W, 450 KV (not included)
- Experience level: Intermediate
- Plane type: Scale Aerobatic

Recommended motor and battery setup:
- Motor: O.S. Engines GT22 (not included)
- Lipo cell: 6S Lipo (not included)
- Esc: 80A (not included)

Features:
- Capable of both precise and extreme 3D aerobatics
- Designed for compatibility with both GP and EP flight
- Genuine Oracover covering
- Bolt-on two-piece wing for easy transport and setup at the field
- Removable canopy for easy change lipo battery and set up radio
- Extremely lightweight laser-cut all-wood construction
- Durable factory-painted fiberglass cowl
- All hardware included

Colour chart:
- White (# 21010)
- Grey (# 21011)
- Black (# 21071)
- Blue (# 21050)
- Orange (# 21060)

COVERED WITH ORACOVER

439.81€  Inc Tax
Kyosho Calmato Alpha 40 TRAINER - Toughlon (Gas/Electric) (K.11252PB)

This new addition to the Kyosho Calmato α 40 lineup exhibits an optimal balance of flying stability and direct control response, ideal for flight training. The Calmato reacts calmly to severe control inputs and maintains its posture even with unexpected stalls at low speed to create the best early flying experience for beginner flyers. Film covering is upgraded from PVC to superior quality reverse-side printed Toughlon which delivers both improved durability and lighter weight. Urethane clear coating can also be applied to prevent wrinkling over long time periods and unlike PVC films, dry-type cover film can also be applied for damage repairs. The fuselage features the Calmato’s unique EP/GP convertible design that requires no gluing to dramatically reduce assembly time. New coloring pattern allows coloring on upper and lower surfaces to be changed to improve visibility when flying. The exquisite finish replicates competition model standards and provides beginners and existing Calmato Alpha owners with the 1 model to enjoy all aspects of R/C airplane flying.

  • Superior stability and direct control response provides an ideal introduction to R/C airplane flight.
  • Covered in lightweight Toughlon film that is more resistant to wrinkling and sagging than PVC film.
  • Convertible design allows choice of preferred power source, electric motor (EP) or gas engine (GP).
  • Glueless design requires no adhesives to complete.
  • Main wing halves are joined by aluminum pins and can be separated for easy transportation.
  • Vertical stabilizer, servo bed, aileron and rudder are all pre-installed.
  • Use of 4-cell 14.8V Li-Po battery enables powerful flight.
  • Lightweight structure of the balsa fuselage provides calm and easy flight characteristics.
  • Comes with pre-assembled fuel tank.
  • Flexible pipe linkage rods for rudder and elevator are pre-installed.
  • Equipped with pre-installed fuel tank.
  • Includes spinner, linkage parts set and lightweight sponge tires.
  1. Advanced glow fuel resistant Toughlon film covering is more resistant to wrinkling and sagging than normal PVC film.
  2. Convertible design allows either electric motor or glow fuel engine to be used as power source. If you prefer quiet flight with no oil mess, choose the EP specification.
  3. If you like the sound of the exhaust note and feeling the power of an engine, choose the GP specifications.
  4. Main wing halves are joined with aluminum pins, and independent left & right aileron servos enable compact transportation

Technical Data:
  • Length 1300mm
  • Width 1600mm
  • Weight EP/2,550g (approx.), GP/2,450g (approx.)
  • Motor 600-1000W BL Motor (sold separately)
  • Engine 2 Cycle 40-46 class engine (sold separately)
  • Battery (EP) 14.8V-4,000-5,000mAh Li-Po battery (sold separately)
  • Main Wing Area  44dm2
  • Wing Loading 55.7-55.9g/dm2
  • Airfoil  Original semi-symmetrical
  • Propeller size D11 x P7-D12 x P8 (sold separately)
  • Tire size Nose 60mm / Main 60mm
  • Dihedral 2.5°
  • Side Thrust 2°
  • R/C system (EP) 4ch, 4 servo, 1 ESC (sold separately)
  • R/C system (GP) 4ch, 5 servo (sold separately)

Kit contents:
  • Pre-assembled fuselage covered in film
  • Linkage parts set
  • Engine mount
  • Fuel tank
  • Silicon tube
  • Motor mount
  • Spinner
  • Main, nose gear set
  • Cowling for EP
  • Decals
176.90€  Inc Tax
Kyosho Calmato Alpha 40 SPORTS - Toughlon (Gas/Electric) RED (K.11257RB)
Ideal performer for low wing beginners to stunt training!
Designed for compatibility with both GP and EP flight!

When its time to graduate from a beginner trainer, the next step could be this stylish low wing sports plane. The option of either EP or GP in the CALMATO ALPHA 40 Sports allows you to choose your preferred power source. Both embody the definitive stability of the CALMATO series with optimal maneuverability allowing low wing airplane beginners to fly stunts like loops and rolls. In addition, this kit is factory assembled and expertly pre-covered in quality film with printed coloring and Kyosho’s comprehensive design and construction ensures no gluing is required. The main wing halves are joined with an aluminum pin and can be separated for compact and easy transport. Motor mount, engine mount, tires, spinner and linkage parts are all included. Only a few separate items are needed to get airborne so it’s easy to enjoy the sporty flight performance of this conveniently priced low wing airplane.


Technical Data:

■Length : 1,300mm
■Width: 1,600mm
■Weight : (EP) 2,650g (GP) 2,550g
■Motor(EP): 600-1000W class backplate mounted outrunner brushless (sold separately)
■Engine (GP): 2-cycle 40-46 class (sold separately)
■Battery (EP): 14.8V 4,000-5,000mAh Li-Po (sold separately)
■Wing Area: 44dm2
■Wing Load : 57.9-62.0g/dm2
■Wing Type : Original semi-symmetrical
■Propeller : D11xP7-D12xP8 (sold separately)


Required for operation:
●4ch, 4servo+ESC(EP) or 5 servo(GP) RC system for airplane
●600-1000W backplate mounted outrunner brushless motor(EP)
●2 cycle 40-46 engine(GP)
●D11xP7-D12xP8 propeller(EP/GP)
●100mm Y extension cord x 1 or aileron(EP/GP)
●200mm extension cord x 2 for aileron
(EP/GP)
●14.8V 4,000-5,000mAh Li-Po battery (Max Dimension: L150xW48xH58mm)(EP)
●Battery charger with Li-PO balance charging feature(EP)
●Fuel, engine starting tool(GP)
●Battery for receiver(EP/GP)
: If the battery cannot use the ESC BEC power, a separate Rx battery unit is required.(EP)
199.47€  Inc Tax
Multiplex Heron KIT (electric glider/sailplane) 2400mm (1M401073)
Multiplex Heron ELAPOR® radio controlled model airplane (sailplane) kit

Multiplex Heron is a high-performance electric glider with T-tail and high-efficiency four-flap wing. With its elegant wings and flowing fuselage lines it responds superbly to thermals. When fitted with the efficient brushless motor and folding propeller the combination delivers plenty of propulsive power. Its docile flying characteristics and excellent performance in the air ensure that the Heron provides a maximum of flying pleasure, whether you are a weekend pilot or an 'old hand', indeed as a Heron owner you'll enjoy floating through the air for long periods, as well as lively aerobatics - all performed with elegance and precision. The extravagant four-flap wing with its extremely stiff CFRP / Aluminium tubular spar technology sets entirely new standards in the 2.40 metre span class. The flaps are a standard feature, making pin-point landings child's play, improving the launch characteristics and giving the pilot a broad performance spectrum for high speed, aerobatics and thermalling.

Features:
Four-flap wing for high performance in the air (camber-changing flaps) and accurate spot-landings (butterfly / crow).
Broad performance spectrum: high-speed, aerobatics, thermalling.
Innovative CFRP / aluminium spar technology for strong, stiff wings.
GRP M-Space techology for a rigid fuselage.
Clear canopy with highly detailed cockpit.
Detachable wings and tailplane for ease of transport.

Specification:
Model Characteristic: Sailplane/Electric glider
Weight: 1300g (glider) / 1500g (electric glider)
Material: Elapor
Level: Hobby
Wingspan: 2400mm
RC functions: rudder/elevator/aileron/flaps/motor
Flight time: approx. 40min
Wing loading: 35 g/dm2
Wing area: 40.67 dm2
Required battery: 3S LiPo

Box content:
1 x Elapor fuselage components.
1 x Elapor wing panel set with integral CFRP-reinforced aluminium spars.
1 x Elapor tailplane set.
1 x Canopy frame.
1 x Glider nose cone.
1 x Clear canopy.
1 x GRP longeron set.
1 x Plastic part set.
1 x Small hardware items and linkage set.
1 x Die-cut decal sheet.
1 x Comprehensive instruction manual.

169.58€  Inc Tax
Multiplex Funray KIT (sailplane) 2000mm (1M214334)
Multiplex FUNRAY ELAPOR® radio controlled model airplane (sailplane) kit

The kit model of this elegant 4-flap electric sailor inspires with dynamic sailing. The FUNRAY has excellent all-rounder characteristics, on the slopes and in the thermals equally. After steep descent with Butterfly, point-accurate landing is a children's game. The FUNRAY convinces with incredible speed and precision in the aerobatics. There was no such thing in the ELAPOR® sailplane models yet! This performance is made possible thanks to its modern hybrid construction in the composite of carbon fiber, stainless steel, aluminum, plastic and the special ELAPOR® construction foam.

Designed and Made in Germany!

The list of innovative new features is long:
• Exceptional performance of a foam model
• Extremely robust wings and sturdy height control by plastic nose strips and aluminum carbon fiber composite braces
• M6 high current plugs in the wings
• Removable wings and tailplane
• Detachable rudder with fillet hinges
• Extremely rigid hull in M-Space technology and continuous carbon fiber reinforcement with 4-square profile pipe, fiberglass straps and positive connections from the firewall to the tail boom
• High-quality UV-resistant decor, designed by Mirco Pecorari
• Protective trekkount made of sturdy stone impact protection
• Trimm chamber in the rear
• Very high performance and very precise flight
• Unbreakable cab cover made of dyed EPP material
• Transparent cab hood with cockpit available as an option
• Rudder and flaps reinforced with stainless steel pipes
• Spacious and tidy interior for battery and RC components

Box content:
ELAPOR® moldings for the fuselage, support surface, tail fins and EPP cockpit cover, CFK-ALU spar, all plastic small parts necessary for assembly, spinner, punched decorative sheet and detailed instructions.

1x Elapor fuselage parts set.
1x Elapor tailplane set.
1x Elapor wing set.
1x EPP cockpit hatch.
1x Carbon fibre / aluminium spar set.
1x Hardware set (horns, hinges pushrods, retainers and spinner).
1x Pre-cut decal sheet.
1x Comprehensive instruction manual.

Required for assembly:
1 x 6-channel computer transmitter and receiver.
1 x Brushless motor set (motor, ESC and propeller).
6 x Servo (with extension cable).
1 x 3000mAh 3S 30C LiPo battery and charger.

Specification:
Model Characteristic: Sailplane/Electric glider:
Weight: 1790g
Material: Elapor
Level: Intermediate
Wingspan: 2000mm
RC functions: rudder/elevator/aileron/spoiler/motor
Flight time: approx. 20min
Wing loading: 45 g/dm2
Wing area: 40 dm2
Required battery: 3S 11.1v 3200mah LiPo
Construction time in min: 60

189.71€  Inc Tax
Extreme Flight 104" MXS EXP - 2.64m (A165-Y/B)
104" MXS EXP (2.64m) 
Extreme Flight MXS-EXP Radio controlled model airplane. Very stable and precise in 3D. Due to its great tracking and precision it is a highly recommended option for a 35% scale IMAC airplane.

Specifications:
Wingspan: 264cm (104") and 279cm (110") with racing tips
Length: 259cm (102")
Wing Area: 2060 sq. in.
Weight: 12 to 14 kg depending on set up and muffler, canister, pipe choice, etc.,..

Recomended Power System:
O.S Engines GT120T 120cc (Twin)
DLA Engine 116cc (Twin Boxer)
600-1000ml fuel tank
Fuel Dot

Propeller: 28x10

Spinner: 125mm (5 inch)

Radio: A modern radio with channel mixing (Spektrum / Futaba / Graupner / ..)

Receiver: Spektrum DSMX 12-Channel Powersafe RX / ..

Battery: 2x Optipower 2S 2150mAh 25C Receiver Pack

Recomended Servos:
7 pcs. KST X20-3612 High Voltage / Hitec HS-7950TH / Hitec HS-7950
1 pcs. Throttle servo such KST BLS815 V2 High Voltage / Hitec HS-5565 MH

1,422.52€  Inc Tax
Extreme Flight 104" MXS EXP (red/blue) - 2.64m (A165-R/B)
104" MXS EXP (2.64m) 
Extreme Flight MXS-EXP Radio controlled model airplane. Very stable and precise in 3D. Due to its great tracking and precision it is a highly recommended option for a 35% scale IMAC airplane.

Specifications:
Wingspan: 264cm (104") and 279cm (110") with racing tips
Length: 259cm (102")
Wing Area: 2060 sq. in.
Weight: 12 to 14 kg depending on set up and muffler, canister, pipe choice, etc.,..

Recomended Power System:
O.S Engines GT120T 120cc (Twin)
DLA Engine 116cc (Twin Boxer)
600-1000ml fuel tank
Fuel Dot

Propeller: 28x10

Spinner: 125mm (5 inch)

Radio: A modern radio with channel mixing (Spektrum / Futaba / Graupner / ..)

Receiver: Spektrum DSMX 12-Channel Powersafe RX / ..

Battery: 2x Optipower 2S 2150mAh 25C Receiver Pack

Recomended Servos:
7 pcs. KST X20-3612 High Voltage / Hitec HS-7950TH / Hitec HS-7950
1 pcs. Throttle servo such KST BLS815 V2 High Voltage / Hitec HS-5565 MH

1,399.34€  Inc Tax
Kyosho Focke Wulf FW190A SQS 50 ARF (K.11873)

The airplane that secured German control over Europe’s skies in the mid part of WWII
recreated in fine detail as a 50-size balsa airplane model

From its entry into battle in 1941, the Focke-Wulf Fw190 joined the Messerschmitt Bf109 as the German Luftwaffe’s main attacking force in Europe. In order to respond to diversifying tactical needs, the Fw190 underwent repeated modifications and re-equipment with 509 “A3” airplanes built between 1941 and 1943. This version still enjoys popularity amongst model airplane enthusiasts and Kyosho is proud to add the Focke-Wulf Fw190A3 to the SQS Warbird Series lineup. Combining scale form with excellent flight performance, the advanced balsa rib construction of the fuselage, main and tail wings realizes lightweight and superior durability. Wrinkle and sag-resistant Toughlon camouflage print covering recreates an exquisitely beautiful finish that cannot be matched by layered wrapping of monochromatic film. Also, Kyosho’s Focke-Wulf Fw190A3 is fully equipped with features such as split flaps and oleo strut retractable undercarriage that produces flight performance reminiscent of the original aircraft while delivering effective lift and speed control during takeoff and landing. An ideal step up for intermediate airplane flyers, advanced R/C airplane flyers will also appreciate the scale feel and flight of this lightweight 50-class model.

●ARF kit featuring rigid, lightweight balsa rib constructed fuselage, main and tail wings.
●Handy 50-class engine delivers realistic scale feel.
●Includes retractable undercarriage incorporating coil spring suspension as standard.
●Equipped with split flaps that are especially effective during takeoff and landing.
●Sag-resistant Toughlon covering features exquisite camouflage color print finish.
●Pre-installed pilot figure and stereolithographic instrument panel.
●Includes fuel tank, silicone tubes, special scale spinner and linkage parts set.

 

■Length 1130mm
■Width 1400mm
■Weight 3,200g (approx.) with 4st 56 engine installed
■Engine 2cycle 46~55、4cycle 56~62(sold separately)
■Wing Area 32.8dm2
■Wing Load 97.6g/dm2 (approx.)
■Wing Type Original semi-symmetrical
■R/C System 6ch, 8servo(sold separately)
■Propeller D11×P6~D13×P7(sold separately)
■Fuell 290cc

ARF Kit Contents

●Pre-assembled fuselage covered in printed film
●Linkage parts set
●Engine mount
●Motor mount (use when changing to electric version)
●Fuel tank
●Silicone tubes
●Special scale spinner
●Tires

Required for operation

●6 channel R/C system for aircraft (7 servos + 1 servo for retracts)
●Batteries for transmitter and receiver
●2-cycle 46-55, 4-cycle 56-62 engine for aircraft
●Glow fuel for aircraft
●Engine starting equipment (plug heater, starter, starter battery, battery charger)
●D11xP6 – D13xP7 propeller
●2 x Y-extension cords for aileron and flap servos
●2 x aileron servo extension cords
●1 extension cord each for aileron, flaps and retract servo (total 3)
●Nylon straps
●Sponge sheet
●Center of gravity adjustment weights

349.53€  Inc Tax
Kyosho Calmato Alpha 40 TRAINER - Toughlon (Gas/Electric) RED (K.11252RB)

This new addition to the Kyosho Calmato α 40 lineup exhibits an optimal balance of flying stability and direct control response, ideal for flight training. The Calmato reacts calmly to severe control inputs and maintains its posture even with unexpected stalls at low speed to create the best early flying experience for beginner flyers. Film covering is upgraded from PVC to superior quality reverse-side printed Toughlon which delivers both improved durability and lighter weight. Urethane clear coating can also be applied to prevent wrinkling over long time periods and unlike PVC films, dry-type cover film can also be applied for damage repairs. The fuselage features the Calmato’s unique EP/GP convertible design that requires no gluing to dramatically reduce assembly time. New coloring pattern allows coloring on upper and lower surfaces to be changed to improve visibility when flying. The exquisite finish replicates competition model standards and provides beginners and existing Calmato Alpha owners with the 1 model to enjoy all aspects of R/C airplane flying.

  • Superior stability and direct control response provides an ideal introduction to R/C airplane flight.
  • Covered in lightweight Toughlon film that is more resistant to wrinkling and sagging than PVC film.
  • Convertible design allows choice of preferred power source, electric motor (EP) or gas engine (GP).
  • Glueless design requires no adhesives to complete.
  • Main wing halves are joined by aluminum pins and can be separated for easy transportation.
  • Vertical stabilizer, servo bed, aileron and rudder are all pre-installed.
  • Use of 4-cell 14.8V Li-Po battery enables powerful flight.
  • Lightweight structure of the balsa fuselage provides calm and easy flight characteristics.
  • Comes with pre-assembled fuel tank.
  • Flexible pipe linkage rods for rudder and elevator are pre-installed.
  • Equipped with pre-installed fuel tank.
  • Includes spinner, linkage parts set and lightweight sponge tires.
  1. Advanced glow fuel resistant Toughlon film covering is more resistant to wrinkling and sagging than normal PVC film.
  2. Convertible design allows either electric motor or glow fuel engine to be used as power source. If you prefer quiet flight with no oil mess, choose the EP specification.
  3. If you like the sound of the exhaust note and feeling the power of an engine, choose the GP specifications.
  4. Main wing halves are joined with aluminum pins, and independent left & right aileron servos enable compact transportation

Technical Data:
  • Length 1300mm
  • Width 1600mm
  • Weight EP/2,550g (approx.), GP/2,450g (approx.)
  • Motor 600-1000W BL Motor (sold separately)
  • Engine 2 Cycle 40-46 class engine (sold separately)
  • Battery (EP) 14.8V-4,000-5,000mAh Li-Po battery (sold separately)
  • Main Wing Area  44dm2
  • Wing Loading 55.7-55.9g/dm2
  • Airfoil  Original semi-symmetrical
  • Propeller size D11 x P7-D12 x P8 (sold separately)
  • Tire size Nose 60mm / Main 60mm
  • Dihedral 2.5°
  • Side Thrust 2°
  • R/C system (EP) 4ch, 4 servo, 1 ESC (sold separately)
  • R/C system (GP) 4ch, 5 servo (sold separately)

Kit contents:
  • Pre-assembled fuselage covered in film
  • Linkage parts set
  • Engine mount
  • Fuel tank
  • Silicon tube
  • Motor mount
  • Spinner
  • Main, nose gear set
  • Cowling for EP
  • Decals

Required for operation:

EP VERSION

  • 4 channel, 4 servo R/C system for airplanes (standard servo x 4)
  • Batteries for transmitter
  • 100mm Y extension cord x 1 for aileron servo
  • 200mm extension cord x 2 for aileron servo
  • Propeller
  • Out Runner BL motor for 40-50 class
  • ESC
  • Li-Po battery
  • Charger for Li-Po battery

    GP VERSION

  • 4 channel, 5 servo R/C system for airplanes (standard servo x 5)
  • Batteries for transmitter
  • 100mm Y extension cord x 1 for aileron servo
  • 200mm extension cord x 2 for aileron servo
  • Propeller
  • 2 cycle 40-46 engine for airplanes
  • Starting tools (plug heater, starter, starter battery, charger)
  • Glow fuel for airplanes
176.90€  Inc Tax
Multiplex Floats kit (for FunCub XL) (1M40128XL)
Multiplex Floats kit for FunCub XL

Floats kit for 1700mm FunCub XL (only floats kit, radio controlled model airplane not included)

64.66€  Inc Tax
Multiplex FunCub XL 1700mm - Kit (1M40111XL)
Multiplex FunCub XL 1700mm - Kit

Product Description
Multiplex FunCub XL radio controlled airplane expands all the fun enjoyed by thousands with the original, in a new larger size! Featuring the same high-wing aerobatic performance, offset flaps for incredibly short takeoff and landing characteristics, and big, soft tundra tires, the FunCub XL lets you fly almost anywhere, from nearly any terrain. Just like its brother Cub, the FunCub XL features the same oversized control surfaces, loads of power and precise, balanced handling for unlimited aerobatic flight, including horizon-to-horizon knife edge passes, endless vertical, and thrilling torque rolls. Setting new standards in its class, with numerous innovative design solutions, the XL also incorporates Multiplex’s "M-Frame technology,” providing a remarkably high-strength fuselage with lightweight carbon tube spars, two-piece wing and quick-release strut fittings for easy field assembly. In addition to the popular aero tow release, elegant LED cover accents make it an absolute eye-catching aerial wonder. The internal cargo bay is perfect for candy drops or lofting Alfred the Parachutist! Certainly, it wouldn’t be a true FunCub without an optional float kit available!

The FunCub XL RR version comes completely assembled and factory painted with applied decals. Featuring a high-performance, powerful brushless motor, remarkably reliable speed control and Hitec’s renowned HS-225BB servos, this receiver ready model comes out of the box 95% complete, allowing for instantaneous FUNtastic flight!

Features:
Full-on Aerobatic Performance
Low Minimum Airspeed
Easy Handling
Two Part Wing for Easy Transport
Offset Landing Flaps for Steep Descents and Short Takeoffs
Off-road Performance with Huge, Soft Wheels
High-strength Fuselage with “M-Frame Technology”
Strong and Lightweight Carbon Fiber Wing Tubes
Suitable for Aero towing 2.5m Gliders (i.e. Multiplex Heron size)
Optional Float Set, Lights and Parachutist

Model Specifications:
Wingspan: 1700mm
Wing Area: 51 dm²
Wing Loading: 56 g/dm²
Overall Length: 1200mm
Weight: 2850g
Control Functions: Aileron / Elevator / Flaps / Motor / Rudder
Optional Control Functions: Tow Hook / Chute / Landing Lights
Flight Characteristics: Large Sport
Target User: Intermediate

The Fun Cub XL Kit include:
Molded ELAPOR Fuselage, Wings, Tail Plane and Rudder, Cowl, Canopy and Load Bay
Tubular CFRP Wing Spars
Pre-built Plywood M-Frame
Aluminum Undercarriage and Rubber "bush" Tires
Propeller, Prop Hub and Plastic Spinner
All Small Plastic Parts and Linkage Components
Pre Cut Decal Sheet
Estimated Build Time: 4 Hours

Kit - Required to Complete:
Radio System (# of Channels): 8 Channels (Spektrum DX8/DX9/iX12)
Servos: 6 x HS-225BB
Brushless Motor (Size/KV Range): 4235/0480
Speed Control: Energy Sport 60 amp
Propeller: 15x8"
Battery: 3S-3200mAh
Receiver: 8-Channel (rudder, elevator, motor, ailerons, flaps, towing hook, cargo door, lights)

199.47€  Inc Tax
Per Page      1 - 24 of 24
  • 1