PowerBox Systems

Sort By:  
PowerBox Competition SR2 (4450)
PowerBox Competition SR2

The PowerBox Competition SR2 offers outstanding functionality, and sets new standards in its class!

Features
22 channels
High-performance battery backer with high continuous load capacity
2.4” TFT screen, legible in sunlight
Bi-lingual menu system
Consistent duplication of all power electronics
Redundant electronic switch
Servo matching for all 22 outputs
Auto matching function
Two independent door sequencers with Setup Assistant
The latest integrated iGyro technology, using the iGyroSAT as gyro sensor
Twelve independent gyro outputs for: 4x aileron, 4x elevator, 4x rudder
Individual gain control for all twelve gyro outputs
Special regulatory algorithm for fixed-wing models
System detects all transmitter mixers
Four selectable output voltages: 6.0 V, 7.4 V, 7.8 V or unregulated
Graphic menu diagrams ensure ultra-simple programming
Fast basic setup procedure using the sophisticated Assistant
Optional GPS III for speed-dependent gyro compensation
Telemetry data for PowerBox P²BUS, Futaba S.BUS2, Jeti Ex-BUS, Spektrum SRXL2, Multiplex M-Link and Graupner HoTT
Transmission of battery, receiver and GPS* data
Virtually all features can be controlled from PowerBox and Jeti transmitters
Selectable servo frame rate: 10ms, 12ms, 14ms, 16ms, 18ms
Servo feedback current suppression
Latest 32-bit micro-processor for precise, high-speed signal processing
High-performance machined heat-sink for optimised heat diffusion
Machined, anodised aluminium switch and screen case
Compact dimensions

Technical Data
Operating voltage: 4.0V - 9.0V
Power supply: 2S LiPo, 2S LiIon, 2S LiFePo, 5S NiCd/NiMH
Current drain Power-on state: 260mA
Current drain Standby: 30µA
Maximum load current: 2x40A (<30s)
Drop-out voltage: 0.3V
Output voltage: 6.0V, 7.4V, 7.8V, unregulated
Signal input: serial
Supported RC systems: PowerBox, Futaba, Jeti, Spektrum, M-Link and Hott
Receiver redundancy: SRS
Channels: 26
Servo sockets: 22
Programmable servo outputs: 22
Servo signal resolution: 0,25µs
Signal frame rate: 10ms, 12ms, 14ms, 16ms, 18ms
Gyro sensor type: external iGyro SAT
Number of sensor axes: 12
Screen: TFT 320x240 pixels
Integral door sequencer: yes
Supported telemetry systems: P²BUS, S.BUS2, EX-Tele, SRXL2, M-Link, Hott
Dimensions: 107 x 69 x 19 mm
Weight: 115g
Weight Sensor Switch: 15g
Weight of LCD screen: 34g
Temperature range: -30°C to +105°C

Set contents
PowerBox Competition SR2
TFT Display
SensorSwitch
2 patch-leads
4 rubber grommets and brass spacer sleeves, factory-fitted
8 retaining screws
Manual

Use for large aerobatic or scale (RC) radio controlled airplanes and other models.

399.55€  Inc Tax
PowerBox Smokepump (8010)
PowerBox Smokepump

The PowerBox smoke pump has been developed by PowerBox-Systems specifically for pumping smoke oil in model aircraft.

Features
Durable metal-geared pump
Infinitely variable flow rate from 0-100%
No external cut-off valve required
High maximum flow rate
Can be operated directly from the receiver power supply
Stand-by cut-off when used with separate battery
Compact design
Low current drain
Mounting facility

Technical Data
Operating voltage: 4.0V - 9.0V
Current drain Power-on state: approx. 1.5 Ampere at 100%
Current drain Standby: 10µA
Max. flow rate: max. 750ml/min
Smoke medium: Smokeoil „blue Max“ or 3W Smokeoil
Dimensions: 79 x 31 mm
Weight: 125g
Temperature range: -30°C to +75°C


Use for large aerobatic or scale (RC) radio controlled airplanes and other models.

159.82€  Inc Tax
Accessories kit for PowerBox Smokepump (8050)
Accessories kit for PowerBox Smokepump

Set contents
2x patchleads, Y-piece, heat-resistant, rubber hose

Use for large aerobatic or scale (RC) radio controlled airplanes and other models.

9.15€  Inc Tax
PowerBox Pioneer (4100)
PowerBox Pioneer

The PowerBox Pioneer is the latest development of a 14-channel power supply unit without voltage regulation, designed for HV servos. Since the unit has no voltage regulators, nor the large heat-sink surfaces required for them, it offers ultra-compact dimensions. Even so, the Pioneer still provides redundancy, as is the standard for all power supply units made by PowerBox-Systems. The output section and the switch controller are duplicated in order to guarantee maximum security.

Features
14 channels
High-performance battery backer with high continuous load capacity
Duplicated circuitry for the entire power electronics
Redundant electronic switch
All features can be controlled using PowerBox and Jeti transmitters
All systems can be operated using BlueCom or PowerBox USB
Integrated iGyro technology of the latest type, with iGyro SAT as gyro sensor
Nine independent gyro outputs for: 3x aileron, 3x elevator, 3x rudder
Special regulatory algorithm for fixed-wing models
Detects all transmitter mixers
Ultra-simple gyro programming in just a few minutes
Optional GPS mode for speed-dependent gyro compensation
Telemetry data for PowerBox P²BUS, Futaba S.BUS2, Jeti Ex-BUS and Spektrum SRXL2
Transmission of voltage, current, capacity, lost frames and holds
User-variable servo frame rate: 10 ms, 12 ms, 14 ms, 16 ms, 18 ms
Suppression of servo feedback currents
Ultra-modern 32-bit microprocessor ensures swift, accurate signal processing
Efficient heat dissipation via the high-quality machined and anodised aluminium case
Machined and anodised aluminium switch housing
Space-saving low-profile format
Ultra-lightweight construction

Technical Data
Operating voltage: 4.0 V - 9.0 V
Power supply: 2s LiPo, 2s Lilon, 2s LiFePo, 5s NiMH
Current drain Power-on state: 105 mA
Current drain Standby: 30 µA
Maximum load current: Continuous 2x10 A (<30 s 2x 20 A)
Drop-out voltage: 0.3 V
Output voltage: unregulated
Signal input: serial
Supported RC systems: PowerBox, Futaba, Jeti and Spektrum
Receiver redundancy: SRS
Channels: 26
Servo sockets: 14
Servo signal resolution: 0,5 µs
Signal frame rate: 10 ms, 12 ms, 14 ms, 16 ms, 18 ms
Gyro regulation: Heading- and Normalmode
Gyro sensor type: external iGyro SAT
Number of sensor axes: 9
Supported telemetry systems: P²BUS, S.BUS2, EX-Tele, SRXL2
Dimensions: 63 x 44 x 12 mm
Weight: 40 g
Weight Sensor Switch: 6 g
Temperature range: -30 °C to +75 °C

Set contents

PowerBox Pioneer + MicroSwitch
2 patch leads 22 cm
2 retaining screws
Adhesive tape
Manual

PowerBox Pioneer + MicroMag
Magnet
2 patch leads 22 cm
2 retaining screws
White adhesive tape
Sticker MagSensor
Key ring
Manual

Use for large aerobatic or scale (RC) radio controlled airplanes and other models.

199.47€  Inc Tax
PowerBox DigiSwitch V2 (6430)
PowerBox DigiSwitch V2

The PowerBox DigiSwitch V2 is the second generation of the PowerBox Digi-Switch, which is well known throughout the world. For almost fifteen years the PowerBox DigiSwitch has represented the standard for small to medium-sized models thanks to its compact format and versatility.

Features
High-performance electronic switch
Ultra-light unit, compact format
Regulated output voltage
User-selectable output voltage: 6.0 V/7.0 V/7.6 V or non regulated
RGB LED voltage indicator for the battery
Telemetry support for CORE systems
Supports 4 different battery types: 2s LiPo, 2s LiIon, 2s LiFePo and 5s NiMH
Regulator monitoring
Suppression of servo feedback currents

Technical Data
Operating voltage: 4.0V - 9.0V
Power supply: 2s LiPo, 2s LiIon, 2s LiFePo, 5s NiMH
Current drain Power-on state: 23 mA
Current drain Standby: 4 μA
Maximum load current: max. 10 A
Drop-out voltage: 0.1 V
Output voltage: 6.0 V/ 7.0 V/7.6 V stabilized or non-regulated
Dimensions: 50 x 18 x 11 mm
Weight: 15 g
Temperature range: -30 °C to +75 °C


Use for large aerobatic or scale (RC) radio controlled airplanes and other models.

49.41€  Inc Tax
PowerBox GPS III (3525)
PowerBox GPS III

The new GPS III is the result of a continuing programme of development of the GPS II, which has now been on the market for a good eight years. The software has been completely restructured, enabling us to improve the unit’s performance significantly. Amongst other new features, measured values are now transferred with greater precision.

The GPS III automatically detects the make of radio control system or PowerBox/iGyro to which it is connected, and sets up correct communication completely automatically.

Futaba users can select different slots using PowerBox Terminal. For HoTT and Multiplex systems it is possible to set up various alarms for altitude or distance.

Features
Latest generation of GPS
Helix antenna for reception regardless of flight attitude
Reception even under difficult conditions
Fast response to speed changes
Automatic system detection
LED status indicator
Accurate 3D speed
Height measurement (altimeter)
Distance, optionally as 2D or 3D value
Distance covered
Geo-coordinates
Number of satellites, measurement accuracy
Supports the following telemetry systems:

PowerBox CORE P²BUS
iGyro/Royal SRS/Mercury
Futaba S.BUS2
Multiplex M-Link
Jeti EX-BUS
Graupner HoTT

Technical Data
Operating voltage: 4.0 V - 9.0 V
Current drain Power-on state: max. 60 mA
Supported RC systems: Royal, Mercury, iGyro 3xtra, iGyrio SRS
Dimensions: 58 x 18 x 17 mm
Weight: 14 g
Temperature range: -30 °C to +75 °C

Use for large aerobatic or scale (RC) radio controlled airplanes and other models.

109.80€  Inc Tax
PowerBox Sensor V3 (6330)
PowerBox Sensor V3

The PowerBox Sensor V3 is the third generation of the PowerBox Sensor, which is well-known throughout the world. For almost twenty years the PowerBox Sensor has represented the standard for small to medium-sized models thanks to its compact format and versatility.

Features
High-performance battery backer
Ultra-light unit, compact format
Double regulated output voltage
Redundant switch and regulator circuitry
User-selectable output voltage: 6.0 V or 7.8 V
Separate RGB LED voltage indicators for each battery
Telemetry support for CORE systems
Supports 4 different battery types: 2s LiPo, 2s LiIon, 2s LiFePo and 5s NiMH
Regulator monitoring
Suppression of servo feedback currents

Technical Data
Operating voltage: 4.0 V - 9.0 V
Power supply: 2s LiPo, 2s LiIon, 2s LiFePo, 5s NiMh
Current drain Power-on state: 30 mA
Current drain Standby: 10 µA
Maximum load current: Peak 2x 10 A
Drop-out voltage: 0.25 V
Output voltage: 6.0 V/ 7.8 V regulated
Dimensions: 65 x 26 x 11 mm
Weight: 30 g
Temperature range: -30 °C bis +105 °C

Use for large aerobatic or scale (RC) radio controlled airplanes and other models.

99.43€  Inc Tax
PowerBox Teleconverter S-BUS 2 (5600)
PowerBox Teleconverter S-BUS 2

The PowerBox Teleconverter provides a means of connecting any PowerBox with a telemetry output to a Futaba S-BUS2 telemetry system.
All you have to do is register the Teleconverter at the transmitter, like a standard sensor.

Technical Data
Operating voltage: 4.0V - 9.0V
Current drain Power-on state: 18mA
Supported telemetry systems: S-BUS 2
Dimensions: 33 x 10 x 3 mm
Weight: 6g
Temperature range: -30°C to +75°C
EMV approval: EN 55014-1:2006 + A1:2009
CE approval: 2004/108/EG

Use for large aerobatic or scale (RC) radio controlled airplanes and other models.

29.89€  Inc Tax
PowerBox USB Interface Adapter (9020)
PowerBox USB Interface Adapter

Use this USB interface to update PowerBox products

Use for large aerobatic or scale (RC) radio controlled airplanes and other models.

29.89€  Inc Tax
PowerBox Adapter leads SRXL2 (9192)
PowerBox Adapter leads SRXL2

For all systems supporting Spektrum SRXL2.

Set contents
2 piece set

Use for large aerobatic or scale (RC) radio controlled airplanes and other models.

8.54€  Inc Tax
PowerBox MicroSwitch (3584)
PowerBox MicroSwitch

Use for PowerBox Pioneer

Use for large aerobatic or scale (RC) radio controlled airplanes and other models.

29.89€  Inc Tax
Per Page      1 - 11 of 11
  • 1