Tools

With the Graupner Micro-USB OTG cable you can connect and transfer data between any compatible Android Smartphone when using the Graupner HoTT viewer (available on Google Play store).

The cable connects the mz-12 PRO, mz-16, mz-32, mc-26 and mc-28 radios to the Android Smartphone without the need for a Bluetooth device.

This cable is an excellent addition when using the Smartphone holder to connect the phone and radio.


Use this accessory for radio controlled (RC) airplanes, helicopters, drones and other models.

Radiolink Trainer Cable


Use this accessory for radio controlled (RC) airplanes, helicopters and other models.

TFL Racing Flat Tip and PH Screwdriver Set

Package: 4 pieces
Flat tip: 4.0/6.0mm
Phillips: 4.0/6.0mm


Use this tools for radio controlled (RC) airplanes, helicopters, onroad and offroad cars, buggies, trucks, crawlers and other models

TFL Racing Flat Tip and PH Screwdriver Set

Package: 4 pieces
Flat tip: 3.0/5.0mm
Phillips: 3.0/5.0mm


Use this tools for radio controlled (RC) airplanes, helicopters, onroad and offroad cars, buggies, trucks, crawlers and other models

TFL Racing Quick Change Tool Kit / 8 in 1

Package:
Driver / 1- / 0+ / 4.0 / 5.5 / 1.5 / 2.0 / 2.5 / 3.0mm

Use this tool for radio controlled (RC) airplanes, helicopters, onroad and offroad cars, buggies, trucks, crawlers and other models

C&Y Hinge Slotting Set

Use for radio controlled (RC) airplanes and other models.

TFL Racing Quick Change Hex Wrench Set 1.5/2.0/2.5/3.0mm

Tool for 1:8 and 1:10 cars, buggies, truggies, trucks,..

TFL Racing Cross Hex Wrench 4.0/5.5/7.0/8.0mm

Tool for 1:8 and 1:10 cars, buggies, truggies, trucks,..

TFL Racing Cross Hex Wrench - inner 2.5/5.0mm and outer 5.5/8.0mm

Tool for 1:8 and 1:10 cars, buggies, truggies, trucks,..

Mosfet Power Multi Function Panel

Features:

• Adjustable glow plug current outlet
• Electric powered fuel pump 
• Switch selectable fuel direction for fueling/defueling
• Colour coded 12V starter outlets
• Dedicated glow plug igniter ports

Hitec DPC-11 PC program interface for all Hitec programmable servos

Dongle for PC Programmer (servo programmer)

Sealing Iron Sleeve

Can be used with Oracover and other covering films and foils

SkyRC GSM-015 GNSS Speed and Altitude Meter

Stop wondering how fast your RC car can run and how high your RC Airplane or helicopter can fly. Now all these data come at your finger with the GNSS SPEED METER by SkyRC. This gadget is ideal for RC racing/flying and casual biking, driving and long journey.

Measure Top Speed, Average Speed and Top Altitude

The user could easily view the screen while working out data such as speed, altitude, total mileage/kilometer, longitude/latitude. It also records the top speed and top altitude for instant recall after the running and helps RC fans much to fine-tune their RC gadgets to achieve better performance.

Reception of GPS & GLONASS Satellites
GSM-015 supports GNSS (Global Navigation Satellite System) with GPS and GLONASS system that means more satellites are orbiting the earth. The advantage of this many satellites will improve positional accuracy by tracking two satellite constellations instead of just one (GPS).

Built-in 1M Memory & Update frequency up to 10Hz
Update frequency is selectable from 1Hz to 10Hz. The higher update frequency is, the more accurate data the user will get. The built-in memory is 1M and can keep recording for 18 hours at 1Hz update frequency. And all the data can be transferred to PC and Mac and shown on Bing Maps. When the Flash is full, the previous record will be replaced automatically. No need to think about clearing data all the time or worry about missing the critical tracking data, when the memory is full.

Support both Metric and Imperial system of Measurement
The Metric and Imperial systems can be switched easily at the user’s finger. Hold and press the MODE button to change.

It comes with a built-in rechargeable LiPo battery. The capacity is 200 mAh and the operating time is up to 150 minutes.

PC link for data logging & Bing Maps
The GNSS LOGGER software is compatible with Windows 7 and above or macOS 10.12 and above.

With GNSS LOGGER, the user could:
Transfer the log data to computer and show the track data on built-in globally accessible Bing Maps
Save the log data to computer
Change Metric and Imperial system of measurement
Change time zone
GNSS update rate selection
Firmware upgrade

TFL High quality Lock Nut Driver Set 4.0/5.5/7.0/8.0mm (Black)

Mosfet Power Multi Function Panel

Features:

• Charge the battery directly through the panel inlet port
• Read the battery charge level with integrated capacity meter
• Electric powered fuel pump 
• Switch selectable fuel direction for fueling/defueling
• Colour coded 12V starter outlets
• Dedicated glow plug igniter ports
• Port for charging your handheld glow plug igniter
• Short circuit and reverse polarity protection

Graupner Remote Glow Plug Clip/Connector with short neck

Spring loaded glow plug clip
Length: 75mm

Graupner Micro Infrared Thermometer (pen shape).

Kavan Replacement Rubber for Engine Starter 39mm

Hard rubber insert.

Kavan Replacement Rubber for Engine Starter 39mm

Soft rubber insert.

Hobbywing LED Program Card (Skywalker, FlyFun)

Overview:
This program card is for programming HobbyWing brushless aircraft ESCs.

It works with the following HobbyWing products:
FlyFun series, SkyWalker series, Guard series (discontinued), and Sword series (discontinued) of brushless aircraft.
Note: this program card doesn’t work with Platinum series of brushless aircraft ESCs.

Specifications:
Size：88x58x14mm
Weight : 40g
Input Voltage : 4.8V—6.0V (a separate battery is needed for powering this program box when ESC has no BEC)

Spiral fuel hose (line) for petrol.

Size: 5mm outer and 3mm inner diameter


Fuel line/hose for radio controlled model engines. Use for petrol fuel.

Ultimate Racing ALU Plug and Connector Soldering Jig

• XT60 (m)
• XT60 (f)
• T-Connector (Deans)
• XT90 (m)
• XT90 (f)
• mini-T
• Bullet connectors (2-10mm)

Use this tool for radio controlled (RC) onroad and offroad car, buggy and truck models.

C&Y Aluminum Tube Bender

Use for radio controlled (RC) airplanes, boats and other models.

Jamara Crimp Pliers

Terminal Crimper for servo connector leads: AWG 28-14
Tool lenght: 170mm

Use this tool for radio controlled (RC) airplanes, helicopters, cars, trucks, buggies, boats and other models. For servo connection lead assembly.

Foam plane holder for assembly in the workshop or assembly at the airport.

Dimensions: 59 × 30 × 36cm.
Made of EVA foam.


Use this accessory for radio controlled (RC) airplanes and other models

Professional Crimping Tool

Slot 1: AWG 24-30 for JR / Futaba Servo-Connectors (0,08qmm to 0,5qmm)
Slot 2: AWG 18-22 for AMP / TAM (0,3qmm to 0,75qmm)

Use this professional crimping tool for JR-style and BEC connectors

The integral ratchet makes the crimping procedure very simple and reliable.

Use this tool for crimping servo connectors on large aerobatic or scale (RC) radio controlled airplanes, helicopters, cars, trucks, buggies, boats and other models.

ALU Fuel Filler Nozzle for 3mm fuel line

Dimensions:
ø 7.2 mm x length 31.5 mm