Receivers
Real-time Telemetry
Real-time model data feedback allows users to receive crucial information on the model's systems.
When paired with flight module PRM-01, model voltage is displayed.
Configurable sound/message/vibration alarms signal potential problems when low model voltage. A low model voltage alarm value can be customized.
Real-time Model Voltage Telemetry Module
Model: PRM-01
Dimensions: 33 x 22 x 11mm
Weight (with wire): 7g
Voltage Input Range: 1S - 6S LiPo Battery
Compatible receiver: R12DS, R9DS (Old version receiver: R10DS, R10D, R9D)
Compatible transmitter: AT10II/AT10/AT9S Pro/AT9S/AT9
Configurable sound/message/vibration alarms signal for low voltage (customizable).
Package Including:
1x Real-time Model Voltage Telemetry Module PRM-01
Radiolink R8FM, 2.4G 8 channel receiver support SBUS and PPM signal
Good choice for use with Radiolink T8FB transmitter in a racing drone.
2000 Meters Control Distance
67-channel pseudo-random frequency hopping help reduce overall signal interference.
2000 meters range enables all possible RC fun.
The maximum PWM jitter is 1.84us with a standard of just 0.5us.
SBUS or PPM Signal Output
8 channels of SBUS/PPM signal output.
Compatible with PIXHWAK, MINI PIX, TURBO PIX, and APM flight controllers which support SBUS or PPM signal.
Weight of 2.5g and small size of 16.0 x 21.5 x 1.0mm make R8FM is tiny enough even for mini racing drone and glider
R8EF Receiver:
Channel: 8ch
Operating voltage: 3 - 6V
Operating current: 38-45mA (input voltage 5V)
Size: 48.5x21x11mm
Weight: 2.5g
Section precision: 4096, 0.25us per section
Signal output: SBUS, PPM
Control distance: 2000 meters in the air
Compatible transmitter: T8S /T8FB/ RC6GS V2/ RC4GS V2/ RC6GS/ RC4GS
Package Including:
1x R8FM Receiver
2.4GHz T-FHSS Air system
4 Channels + S-BUS
S-BUS2 Port for telemetry
Diversity Dual Antenna
Ultra small design for smaller models
Heat shrink enclosure to reduce weight
Specification:
Modulation: T-FHSS Air
Weight: 4.8g
Voltage: 4.8 - 7.4V
Channels: 4ch + S.Bus2 Port
Dimensions: 18x41.4x9.9mm
Frequency: 2.4GHz
Aerial Length: 2x 150mm
R8EF Receiver:
Channel: 8ch
Operating voltage: 4.9-10V
Operating current: 19-25mA (input voltage 5V)
Size: 48.5x21x11mm
Weight: 7g
Feature: Fail-safe
Section precision: 4096
Signal output: S-BUS, PPM and PWM
Signal mode: Green LED, output 8 channel PWM signal
SBUS/PPM signal mode: Both red and green LED on, CH1 output S-BUS signal, CH2 output PPM signal, CH3 to CH8 output PWM signal (at the same time)
Package Including:
1x R8EF Receiver
Key Features
- Case design offers better strain relief on antenna lead
- DSMX with DSM2 Backward compatibility*
- 22ms and 11ms Compatible
- Upgrade for any Spektrum receiver with available remote receiver ports
- Great addition to AR636, AR7350, AR9350, Telemetry Receivers and PowerSafe receivers
- Includes 24 inch extension
Repositionable Antenna
This antenna design allows for easy repositioning with the option to exit the case from the side or top. It also offers added strain relief to the antenna wire, and is optimized to fit into the tightest of Remote control aircraft.
Overview
The next generation of Spektrum remote receivers are here with the SPM9745 and SPM9746 Receivers. Featuring a user friendly antenna setup that allows for the antenna to be placed in 2 positions, making installation into those tight projects easier than ever. Fully compatible with DSMX and DSM2 Transmitters*. Use these to add more receiving points on any Spektrum receiver that has 1 or more Remote receiver ports.
The remote receiver includes one 24-inch extension; however, various lengths of receiver extensions can be purchased allowing various placement options for mounting purposes. Additional remote receiver extensions are available in 6", 9", 12", 24" and 36" lengths.
*DSMX Remote Receivers must be used with a DSMX Main Receiver.
RPM sensor for backplate installation on 40- to 90-sized glow engines
Bolt-on installation with nothing else to install, picks up the rotation of the crankshaft through the backplate
Compatible with Spektrum™ telemetry modules
Has a micro JST connector and plugs into the TM1000 telemetry module
TM1000 AND/OR a Telemetry Capable Transmitter required
Easy installation
Telemetry Capable Receiver or Module and Telemetry capable DSMR/DSMX Transmitter required
Use for Radiolink transmitters AT9, AT9S, AT9S Pro, AT10 and AT10II.
4000 Meters Control Distance
DSSS and FHSS hybrid spread spectrum, 16 channels pseudo-random frequency hopping, and QPSK modulation ensures excellent anti-interference performance, highly constant, and stable transmission signal present on all 12 channels of R12DS.
4KM Range enables all possible RC fun.
The maximum PWM jitter is 1.84us with a standard of just 0.5us.
R12DS Receiver:
Channels:
- 11 channels for PWM signal output
- 12 channels for SBUS&PWM signal output.
Working voltage: 4.8-10V
Working current: 38-45mA(input voltage: 5V)
Size: 50 x 32 x 14.5mm
Weight: 14g
4096 section precision, 0.25us per section, servo anti-shake rudder.
Control distance: approx. 4000m in the air.
Receiver integrate telemetry sensor including signal strength and voltage. Support extended engine voltage telemetry module PRM-01 and module PRM-02 can feedback GPS info, Speed, voltage etc. on AT9/AT9S/AT9S Pro/AT10/AT10II display when work with flight controller APM or PIX.
Package Including:
1x R12DS Receiver
- 1