Latest Products
-
Pilot-RC Generic Wingbags for 35cc Airplanes
69.54€ Inc Tax
-
Stick-On Steel weight 10x 10g (100g)
3.66€ Inc Tax
-
4mm Gold (Banana) Charging Cable for XT90 Connector
7.93€ Inc Tax
-
ALU Servo Arm (1") 25.4mm / M3 / 25T
7.93€ Inc Tax
-
Professional Crimping Tool
29.89€ Inc Tax
-
FOXY G3 Brushless Motor C2826-750kv
34.16€ Inc Tax
-
O.S. Connecting Rod 25FX,21RF,SE
15.25€ Inc Tax
-
Kavan Mini Pushrod Coupler 0.5 - 2mm (10 pcs)
7.93€ Inc Tax
-
Louise RC - MFT ST Rocket 1:10 Stadium/Monster Truck Tire Set - Soft (2 pieces)
29.89€ Inc Tax
-
Beta 1:8 Buggy Racing Tires CUBEZ - Super Soft (2 pieces)
14.64€ Inc Tax
-
FOXY Speed Propeller 7x7
3.05€ Inc Tax
-
FOXY Carbon Propeller 14x6
9.76€ Inc Tax
PowerBox Competition SR2
The PowerBox Competition SR2 offers outstanding functionality, and sets new standards in its class!
Features
22 channels
High-performance battery backer with high continuous load capacity
2.4” TFT screen, legible in sunlight
Bi-lingual menu system
Consistent duplication of all power electronics
Redundant electronic switch
Servo matching for all 22 outputs
Auto matching function
Two independent door sequencers with Setup Assistant
The latest integrated iGyro technology, using the iGyroSAT as gyro sensor
Twelve independent gyro outputs for: 4x aileron, 4x elevator, 4x rudder
Individual gain control for all twelve gyro outputs
Special regulatory algorithm for fixed-wing models
System detects all transmitter mixers
Four selectable output voltages: 6.0 V, 7.4 V, 7.8 V or unregulated
Graphic menu diagrams ensure ultra-simple programming
Fast basic setup procedure using the sophisticated Assistant
Optional GPS III for speed-dependent gyro compensation
Telemetry data for PowerBox P²BUS, Futaba S.BUS2, Jeti Ex-BUS, Spektrum SRXL2, Multiplex M-Link and Graupner HoTT
Transmission of battery, receiver and GPS* data
Virtually all features can be controlled from PowerBox and Jeti transmitters
Selectable servo frame rate: 10ms, 12ms, 14ms, 16ms, 18ms
Servo feedback current suppression
Latest 32-bit micro-processor for precise, high-speed signal processing
High-performance machined heat-sink for optimised heat diffusion
Machined, anodised aluminium switch and screen case
Compact dimensions
Technical Data
Operating voltage: 4.0V - 9.0V
Power supply: 2S LiPo, 2S LiIon, 2S LiFePo, 5S NiCd/NiMH
Current drain Power-on state: 260mA
Current drain Standby: 30µA
Maximum load current: 2x40A (<30s)
Drop-out voltage: 0.3V
Output voltage: 6.0V, 7.4V, 7.8V, unregulated
Signal input: serial
Supported RC systems: PowerBox, Futaba, Jeti, Spektrum, M-Link and Hott
Receiver redundancy: SRS
Channels: 26
Servo sockets: 22
Programmable servo outputs: 22
Servo signal resolution: 0,25µs
Signal frame rate: 10ms, 12ms, 14ms, 16ms, 18ms
Gyro sensor type: external iGyro SAT
Number of sensor axes: 12
Screen: TFT 320x240 pixels
Integral door sequencer: yes
Supported telemetry systems: P²BUS, S.BUS2, EX-Tele, SRXL2, M-Link, Hott
Dimensions: 107 x 69 x 19 mm
Weight: 115g
Weight Sensor Switch: 15g
Weight of LCD screen: 34g
Temperature range: -30°C to +105°C
Set contents
PowerBox Competition SR2
TFT Display
SensorSwitch
2 patch-leads
4 rubber grommets and brass spacer sleeves, factory-fitted
8 retaining screws
Manual
Use for large aerobatic or scale (RC) radio controlled airplanes and other models.
The PowerBox Competition SR2 offers outstanding functionality, and sets new standards in its class!
Features
22 channels
High-performance battery backer with high continuous load capacity
2.4” TFT screen, legible in sunlight
Bi-lingual menu system
Consistent duplication of all power electronics
Redundant electronic switch
Servo matching for all 22 outputs
Auto matching function
Two independent door sequencers with Setup Assistant
The latest integrated iGyro technology, using the iGyroSAT as gyro sensor
Twelve independent gyro outputs for: 4x aileron, 4x elevator, 4x rudder
Individual gain control for all twelve gyro outputs
Special regulatory algorithm for fixed-wing models
System detects all transmitter mixers
Four selectable output voltages: 6.0 V, 7.4 V, 7.8 V or unregulated
Graphic menu diagrams ensure ultra-simple programming
Fast basic setup procedure using the sophisticated Assistant
Optional GPS III for speed-dependent gyro compensation
Telemetry data for PowerBox P²BUS, Futaba S.BUS2, Jeti Ex-BUS, Spektrum SRXL2, Multiplex M-Link and Graupner HoTT
Transmission of battery, receiver and GPS* data
Virtually all features can be controlled from PowerBox and Jeti transmitters
Selectable servo frame rate: 10ms, 12ms, 14ms, 16ms, 18ms
Servo feedback current suppression
Latest 32-bit micro-processor for precise, high-speed signal processing
High-performance machined heat-sink for optimised heat diffusion
Machined, anodised aluminium switch and screen case
Compact dimensions
Technical Data
Operating voltage: 4.0V - 9.0V
Power supply: 2S LiPo, 2S LiIon, 2S LiFePo, 5S NiCd/NiMH
Current drain Power-on state: 260mA
Current drain Standby: 30µA
Maximum load current: 2x40A (<30s)
Drop-out voltage: 0.3V
Output voltage: 6.0V, 7.4V, 7.8V, unregulated
Signal input: serial
Supported RC systems: PowerBox, Futaba, Jeti, Spektrum, M-Link and Hott
Receiver redundancy: SRS
Channels: 26
Servo sockets: 22
Programmable servo outputs: 22
Servo signal resolution: 0,25µs
Signal frame rate: 10ms, 12ms, 14ms, 16ms, 18ms
Gyro sensor type: external iGyro SAT
Number of sensor axes: 12
Screen: TFT 320x240 pixels
Integral door sequencer: yes
Supported telemetry systems: P²BUS, S.BUS2, EX-Tele, SRXL2, M-Link, Hott
Dimensions: 107 x 69 x 19 mm
Weight: 115g
Weight Sensor Switch: 15g
Weight of LCD screen: 34g
Temperature range: -30°C to +105°C
Set contents
PowerBox Competition SR2
TFT Display
SensorSwitch
2 patch-leads
4 rubber grommets and brass spacer sleeves, factory-fitted
8 retaining screws
Manual
Use for large aerobatic or scale (RC) radio controlled airplanes and other models.