Kyosho

Sort By:  
Kyosho Inferno NEO ST 3.0 1:8 RC Nitro READYSET (K.33016B)

Feel the impulse for full throttle of the high-torque engine and experience stadium truck power and stability.

With 8 World Championship titles, the INFERNO is recognized as Kyosho’s flagship model. The updated 1/8 scale INFERNO NEO ST Race Spec 3.0 brings the dynamic racing potential of INFERNO performance DNA to stadium truck racing. Mounted with the user-friendly KE25SP engine fitted with recoil starter, optimal balance of speed and handling is realized through Big Bore oil shocks and unique block pattern tires that dominate on any type of surface, including race circuits. With its racing chassis base, durability and reliability combine with wide scope of setting options and compatibility with performance-enhancing optional parts so you can tune your truck into a dynamic high-performance machine! With this Readyset package, the thrilling world of engine-powered off-road trucking is easy for everyone to enjoy.

  • Readyset includes Inferno based shaft drive 4WD chassis with latest radio system layout and completed body.
  • KE25SP engine is matched with premium polished muffler and manifold.
  • Maintenance-friendly chassis construction has removed the use of E-rings.
  • Front-Center-Rear gear differentials provide optimal power transfer to all four wheels.
  • Universal swing shafts equipped on front minimize drive loss and increase crash resistance.
  • Equipped with stabilizer bars on front and rear to control chassis roll through corners.
  • High-degree of compatibility with parts used in the highest spec Inferno ST RR Evo.2 model.
  • Compatible with Inferno series optional parts to unlock even more performance from your machine.

Kit Contents 

  • Fully assembled chassis complete with RC linkages
  • Pre-cut body finished with printed color scheme
  • 2.4GHz Syncro KT-231P+ transmitter
  • 1.5, 2.0, 2.5, 3.0mm hex wrenches
  • Cross wrench (large)
  • 17mm wheel wrench

Required for operation 

  • Glow fuel
  • 8 x AA-size alkaline batteries for receiver and transmitter
  • Engine starting tools (fuel bottle, plug heater)

Technical data

  • Length : 550mm
  • Width : 427mm  
  • Height : 225mm  
  • Ground Clearance : 40mm
  • Wheelbase : 355mm
  • Tread (F/R) : 289mm / 289mm  
  • Tire(F/R) :Φ148×66mm / Φ143×66mm  
  • Gear Ratio :14.6:1 
  • Weight : 3,750g approx.
  • Motor : KE25SP
  • Transmitter 2.4GHz Syncro KT-231P+
488.00€  Inc Tax
Kyosho FO-XX VE 1:8 RC 4WD READY SET EP (K.34255B)

Monster truck power upgraded from awesome to epic!
5-link suspension is a match for any terrain

Robust body incorporating a hybrid monocoque and pipe frame structure with brushless power system makes the 1/8 scale FO-XX VE 2.0 monster truck one tough mudder. This upgraded model earns the ‘2.0’ in its name with a new 5-link suspension system. Upper and lower link ball joints and lateral rod to regulate lateral movement combine to produce deeper and more flexible suspension stroke for superior rock crawler feedback. The dynamic performance of the FO-XX VE 2.0 makes full use of the 2000KV KYOSHO SPEED HOUSE TORX 8 brushless motor on any surface, from rough roads to tarmac. In addition to the brushless motor, the speed controller, transmitter, receiver, wheels and tires have all been redesigned to improve on previous models to deliver superior control and handling. Open the throttle in open space and let the FO-XX VE 2.0 show you what power and performance this true R/C machine is capable of. Simply purchase batteries for the transmitter transmitter/receiver and battery for the motor with a charger and this factory-assembled Readyset makes the dynamic performance of the FO-XX VE 2.0 easy for anyone to enjoy.


●Factory assembled Readyset only requires battery for transmitter and chassis plus a battery charger to run.
●KYOSHO SPEED HOUSE brushless system delivers breathtaking power and performance.
●Independent left-right battery boxes suit various size batteries. Suitable for twin packs of 7.2V Ni-MH to 7.4V Li-Po batteries.
●Features same 17mm wheel hubs and nuts as the Inferno series.
●Radio box protects receiver and battery from shocks and dirt.
●Rigid axle on front and rear with robust casing realizes efficient traction transfer.
●Front and rear differentials incorporate steel spiral gears to meet the demands of this high power machine.
●Pre-painted body complete with decals applied combines with resin pipe frame and roof to recreate a realistic form.
●Equipped Syncro KR-331 receiver features failsafe function that stops the machine in the event of radio signal interruption.


Technical datas

■Length 545mm
■Width 383mm
■Height 248mm
■Wheelbase 360mm
■Tread 312mm
■Tires(F & R) φ155 x 70.5mm
■Gear Ratio 8.68:1
■Weight 4,650g (approx.)
■Motor KYOSHO SPEED HOUSE・TORX 8 Brushless Motor

 

Readyset Contents

●Factory assembled chassis complete with control linkages
●Pre-cut and painted body complete with decals applied
●2.4GHz Syncro KT-231P+ transmitter
●L shaped hex wrench (1.5mm, 2.0mm, 2.5mm, 3.0mm)
●Cross wrench (large)
●17mm wheel wrench

 

Required for Operation

●AA-size batteries x 4 for transmitter
●Battery for chassis x 2 (7.2V Ni-MH or 7.4V Li-Po) ※ Super Plug
●Charger for chassis battery

488.00€  Inc Tax
Kyosho Psycho Kruiser 2.0 VE 1:8 RC 4WD Readyset EP (K.34256B)
The brutal power of this machine is meant for expert hands only!

Top-level drivers proclaim this as the most extreme power in an R/C model ever experienced! This extraordinary monster truck features a 3-diff shaft drive full time 4WD chassis with a design running thick with the DNA of the multiple world-championship winning Inferno. The combination of 22.2V 6-cell LiPo battery and 2000Kv KYOSHO SPEED HOUSE TORX8 brushless motor produces a ferocious power to weight ratio that delivers explosive acceleration and top speeds of more than 80km/h. If you are not in full control of the throttle, it can back flip and leave onlookers completely lost for words. This formidable power is harnessed with a high-rigidity bulkhead, hardened chassis, reinforced transmission and diff ring gears, dial adjustable large capacity oil shocks and shock resistant battery case. This feature packed machine comes as a fully assembled Readyset package and requires no frequency band setting with the 2.4GHz Syncro KT-231P+ transmitter and ultra high-torque KS5031-09MW steering servo system pre-installed 4-color printed body is included so you only need to add your own charged LiPo battery and batteries to the transmitter for the mayhem to start. We would like to say this model is for everyone, but such is the power of this machine only expert level drivers can have some degree of confidence in managing its extreme performance. There has never been a monster truck like this one, and maybe there never will be!

●3 diff shaft drive full time 4WD chassis and 22.2V + brushless motor produce power like never before.
●Fully factory assembled Readyset.
●Pre-cut 4 color printed body.
●Pre-installed 2000Kv KYOSHO SPEED HOUSE TORX8 brushless motor. (drip proof)
●2.4GHz R/C system with Syncro KT-231P+ transmitter requires no frequency band control.
●Includes waterproof ultra high torque KS5031-09MW steering servo.
●Incorporates many reinforced parts such as hardened main chassis.
●Features machined aluminum dial adjustable big bore shocks.
●Straight cut bevel gears made from special toughened steel and gear modules on the reinforced diff ring gear are designed to match the machine’s extreme level of power.Equipped with 6-spoke wheels & block tires. Balances rough road running power with high level grip performance.
●Stabilizers and universal joints are equipped on front and rear.
●Mud guard installed on rear axle provides protection from dirt and mud. Promises stable performance under various running conditions.
●Resin chassis stiffener as used on the Inferno NEO is installed on front and rear.
●Full bearing specification features 18 bearings through the drive system and wheels with 2 in the clutch bell.
●Large bumper provides protection for the front suspension holders and lower arm plate.
●Compatible with many optional parts for the Inferno series.

Technical data:
Length: 550mm
Width: 410mm
Height: 210mm
Wheelbase: 355mm
Tread (F/R): 345mm / 345mm
Tire (F/R): 148 x 66mm / 148 x 66mm
Gear Ratio: 17.2:1
Weight: 4,650g
Motor: KSH TORX 8 - 2000kV

Readyset Content:
Pre-assembled chassis with pre-set control linkages
Factory assembled printed body
2.4GHz R/C system Syncro KT-201 pre-installed
L-shape hex wrenches: 1.5, 2.0, 2.5, 3.0mm
Cross wrench
17mm wheel wrench

Required for Operation:
4 x AA alkaline batteries for transmitter
Running battery (2 x 7.2 v Ni-MH or 2 x 2S/3S LiPo battery)
Battery Charger

619.76€  Inc Tax
Kyosho Focke Wulf FW190A SQS 50 ARF (K.11873)

The airplane that secured German control over Europe’s skies in the mid part of WWII
recreated in fine detail as a 50-size balsa airplane model

From its entry into battle in 1941, the Focke-Wulf Fw190 joined the Messerschmitt Bf109 as the German Luftwaffe’s main attacking force in Europe. In order to respond to diversifying tactical needs, the Fw190 underwent repeated modifications and re-equipment with 509 “A3” airplanes built between 1941 and 1943. This version still enjoys popularity amongst model airplane enthusiasts and Kyosho is proud to add the Focke-Wulf Fw190A3 to the SQS Warbird Series lineup. Combining scale form with excellent flight performance, the advanced balsa rib construction of the fuselage, main and tail wings realizes lightweight and superior durability. Wrinkle and sag-resistant Toughlon camouflage print covering recreates an exquisitely beautiful finish that cannot be matched by layered wrapping of monochromatic film. Also, Kyosho’s Focke-Wulf Fw190A3 is fully equipped with features such as split flaps and oleo strut retractable undercarriage that produces flight performance reminiscent of the original aircraft while delivering effective lift and speed control during takeoff and landing. An ideal step up for intermediate airplane flyers, advanced R/C airplane flyers will also appreciate the scale feel and flight of this lightweight 50-class model.

●ARF kit featuring rigid, lightweight balsa rib constructed fuselage, main and tail wings.
●Handy 50-class engine delivers realistic scale feel.
●Includes retractable undercarriage incorporating coil spring suspension as standard.
●Equipped with split flaps that are especially effective during takeoff and landing.
●Sag-resistant Toughlon covering features exquisite camouflage color print finish.
●Pre-installed pilot figure and stereolithographic instrument panel.
●Includes fuel tank, silicone tubes, special scale spinner and linkage parts set.

 

■Length 1130mm
■Width 1400mm
■Weight 3,200g (approx.) with 4st 56 engine installed
■Engine 2cycle 46~55、4cycle 56~62(sold separately)
■Wing Area 32.8dm2
■Wing Load 97.6g/dm2 (approx.)
■Wing Type Original semi-symmetrical
■R/C System 6ch, 8servo(sold separately)
■Propeller D11×P6~D13×P7(sold separately)
■Fuell 290cc

ARF Kit Contents

●Pre-assembled fuselage covered in printed film
●Linkage parts set
●Engine mount
●Motor mount (use when changing to electric version)
●Fuel tank
●Silicone tubes
●Special scale spinner
●Tires

Required for operation

●6 channel R/C system for aircraft (7 servos + 1 servo for retracts)
●Batteries for transmitter and receiver
●2-cycle 46-55, 4-cycle 56-62 engine for aircraft
●Glow fuel for aircraft
●Engine starting equipment (plug heater, starter, starter battery, battery charger)
●D11xP6 – D13xP7 propeller
●2 x Y-extension cords for aileron and flap servos
●2 x aileron servo extension cords
●1 extension cord each for aileron, flaps and retract servo (total 3)
●Nylon straps
●Sponge sheet
●Center of gravity adjustment weights

349.53€  Inc Tax
Kyosho Calmato Alpha 40 SPORTS - Toughlon (Gas/Electric) RED (K.11257RB)
Ideal performer for low wing beginners to stunt training!
Designed for compatibility with both GP and EP flight!

When its time to graduate from a beginner trainer, the next step could be this stylish low wing sports plane. The option of either EP or GP in the CALMATO ALPHA 40 Sports allows you to choose your preferred power source. Both embody the definitive stability of the CALMATO series with optimal maneuverability allowing low wing airplane beginners to fly stunts like loops and rolls. In addition, this kit is factory assembled and expertly pre-covered in quality film with printed coloring and Kyosho’s comprehensive design and construction ensures no gluing is required. The main wing halves are joined with an aluminum pin and can be separated for compact and easy transport. Motor mount, engine mount, tires, spinner and linkage parts are all included. Only a few separate items are needed to get airborne so it’s easy to enjoy the sporty flight performance of this conveniently priced low wing airplane.


Technical Data:

■Length : 1,300mm
■Width: 1,600mm
■Weight : (EP) 2,650g (GP) 2,550g
■Motor(EP): 600-1000W class backplate mounted outrunner brushless (sold separately)
■Engine (GP): 2-cycle 40-46 class (sold separately)
■Battery (EP): 14.8V 4,000-5,000mAh Li-Po (sold separately)
■Wing Area: 44dm2
■Wing Load : 57.9-62.0g/dm2
■Wing Type : Original semi-symmetrical
■Propeller : D11xP7-D12xP8 (sold separately)


Required for operation:
●4ch, 4servo+ESC(EP) or 5 servo(GP) RC system for airplane
●600-1000W backplate mounted outrunner brushless motor(EP)
●2 cycle 40-46 engine(GP)
●D11xP7-D12xP8 propeller(EP/GP)
●100mm Y extension cord x 1 or aileron(EP/GP)
●200mm extension cord x 2 for aileron
(EP/GP)
●14.8V 4,000-5,000mAh Li-Po battery (Max Dimension: L150xW48xH58mm)(EP)
●Battery charger with Li-PO balance charging feature(EP)
●Fuel, engine starting tool(GP)
●Battery for receiver(EP/GP)
: If the battery cannot use the ESC BEC power, a separate Rx battery unit is required.(EP)
199.47€  Inc Tax
Kyosho Calmato Alpha 40 SPORTS - Toughlon (Gas/Electric) (K.11257PB)
Ideal performer for low wing beginners to stunt training!
Designed for compatibility with both GP and EP flight!

When its time to graduate from a beginner trainer, the next step could be this stylish low wing sports plane. The option of either EP or GP in the CALMATO ALPHA 40 Sports allows you to choose your preferred power source. Both embody the definitive stability of the CALMATO series with optimal maneuverability allowing low wing airplane beginners to fly stunts like loops and rolls. In addition, this kit is factory assembled and expertly pre-covered in quality film with printed coloring and Kyosho’s comprehensive design and construction ensures no gluing is required. The main wing halves are joined with an aluminum pin and can be separated for compact and easy transport. Motor mount, engine mount, tires, spinner and linkage parts are all included. Only a few separate items are needed to get airborne so it’s easy to enjoy the sporty flight performance of this conveniently priced low wing airplane.


Technical Data:

■Length : 1,300mm
■Width: 1,600mm
■Weight : (EP) 2,650g (GP) 2,550g
■Motor(EP): 600-1000W class backplate mounted outrunner brushless (sold separately)
■Engine (GP): 2-cycle 40-46 class (sold separately)
■Battery (EP): 14.8V 4,000-5,000mAh Li-Po (sold separately)
■Wing Area: 44dm2
■Wing Load : 57.9-62.0g/dm2
■Wing Type : Original semi-symmetrical
■Propeller : D11xP7-D12xP8 (sold separately)


Required for operation:
●4ch, 4servo+ESC(EP) or 5 servo(GP) RC system for airplane
●600-1000W backplate mounted outrunner brushless motor(EP)
●2 cycle 40-46 engine(GP)
●D11xP7-D12xP8 propeller(EP/GP)
●100mm Y extension cord x 1 or aileron(EP/GP)
●200mm extension cord x 2 for aileron
(EP/GP)
●14.8V 4,000-5,000mAh Li-Po battery (Max Dimension: L150xW48xH58mm)(EP)
●Battery charger with Li-PO balance charging feature(EP)
●Fuel, engine starting tool(GP)
●Battery for receiver(EP/GP)
: If the battery cannot use the ESC BEC power, a separate Rx battery unit is required.(EP)
199.47€  Inc Tax
Kyosho Radio Controlled EP 4WD Car Fazer Mk2 Dodge Challenger SRT Hellcat 1:10 Readyset (electric) (K.34415T1B)
Kyosho Radio Controlled Electric Powered 4WD Car Fazer Mk2 Dodge Challenger SRT Hellcat 1:10 Readyset

Now driving R/C is even more fun
Newly designed FZ02 chassis with realistic racing car body

For the pure enjoyment of R/C car driving, the combination of a beautifully reproduced car body with the FAZER series chassis can’t be beaten. Kyosho has taken its standard touring car chassis and given it a full model makeover that has evolved performance to a new level. A simplified design with fewer parts has improved maintenance efficiency and reduced weight while core strength and rigidity has been increased through new materials and ribbing and stiffeners on front and rear. In addition, the symmetrical chassis design synergizes excellent front-rear balance through the suspension with responsive control, irrespective of power source. Featuring slipper clutch, front & rear gear differentials, oil shocks and full ball bearing specs, the high durability and impact resistance allows drivers to unleash the full potential of the chassis. Brake disc wheel hubs with two different offsets (0mm, +5mm) provide compatibility with 190mm and 200mm width body styles and allows the wheelbase to be adjusted to 274mm by replacing some parts (sold separately) for compatibility with other 1/10 scale body styles, in addition the body included. The Readyset package comes fully assembled and includes everything except charger and battery for the chassis, and batteries for the transmitter.

●New design shaft drive full-time 4WD touring chassis(FZ02).
●Factory-assembled Readyset package only requires 4 x AA alkaline batteries for the transmitter, and battery with charger for the chassis.
●Equipped with 2-bevel grease-filled gear diffs on front and rear.
●Large size dog bones and cup joints realize superior reliability and durability.
●Belt mounting battery compartment allows various battery types to be used.
●Full ball bearings that reduce drive loss equipped throughout the drive system.
●Features KS202W waterproof steering servo.
●Includes completely finished body with color scheme and decals applied.
●Sealed differential and transmission deliver reliable performance, even on dusty parking lot surfaces.
●Performance can be further enhanced by installing various optional parts.

Technical data:
■Length 486mm
■Width 200mm
■Wheelbase 274mm
■Tread (F/R) F:174mm/R:174mm
■Tires (F/R) F:φ66×25mm/R:φ66×25mm
■Gear Ratio 6.5:1
■Weight 1650g (approx.)
■R/C system Syncro KT-231P+
■Motor G14L

Kit Contents:
●Completed chassis with R/C radio installed
●Factory assembled body complete with color scheme
●Syncro KT-231P+ transmitter
●Installed 60A waterproof electronic speed controller (forward/brake/reverse)
●Hexagonal wrench
●Spanner

Required for Operation:
●4 x AA batteries for transmitter
●Battery for chassis (recommended: 7.2V Ni-MH battery)
●Charger for battery for chassis
●Tools

249.49€  Inc Tax
Kyosho Wheel 15-Spoke Gold 24mm (2 pcs.) (K.VZH003G)
Kyosho Wheel 15-Spoke Gold 24mm

  • 2 pieces


Fazer Mk2, FW06, 1:10,..

9.76€  Inc Tax
Mini-Z RWD Audi R8 LMS 2015 (W-MM/KT531P) - black and red (K.32323BKR)

RWD chassis with new transmitter combination launches a new series to follow the MR-03

With just 8 x AAA-size batteries, the MINI-Z Racer allows anyone to enjoy the beautiful style and advanced performance of R/C cars. First launched in 2013, Kyosho has renewed the MINI-Z Racer Sports MR-03 concept to be even more user-friendly and appealing to more drivers with the MINI-Z RWD Series! Widely popular body styles in highly detailed body sets create the incredibly realistic model lineup. Including the latest Syncro KT-531P transmitter with steering trim, throttle trim, dual rate, LED control function, the sponge grip of the steering wheel provides comfortable fit for precision control feel. The set also includes a car body finished to display-model standard that matches stunning style with the performance, reliability and durability of the MR-03 chassis. The new control program on the newly designed circuit board realizes linear handling characteristics and can be further enhanced for even easier control by installing the optional gyro unit (MZW431). This series represents the perfect package for a deep dive into the amazing world of R/C cars!
*Syncro KT-531P transmitter uses FHSS 2.4GHz and is not compatible with existing ASF/MHS/FHS 2.4GHz systems.


●New series includes the newly developed Syncro KT-531P transmitter with multiple setting options.
●New circuit board with newly developed control program realizes dramatically improved steering feel.
●Highly detailed display-standard body is fully factory finished. 
●Compatible with all MINI-Z Racer body styles. **Motor case and diff gear assembly to suit body are required to be purchased separately.
●Front suspension incorporates VCS that optimizes camber angle with suspension stroke.
●Compatible with optional gyro unit (MZW431). Volume of gyro effect can be adjusted on the chassis. (**Settings can be adjusted from the transmitter if using KT-432PT transmitter (sold separately)).
●Compatible with optional LED light unit clear & red (MZW429R).

 

■Length 158.0mm 
■Width 71.8mm 
■Height 44.5mm 
■Wheelbase 94.0mm (L)
■Chassis RWD (MR-03)
■Front Wheel Offset Narrow +1.5mm (for RWD)
■Rear Wheel Offset Wide +1.5mm (for RWD)
■R/C System Syncro KT-531P


Readyset Contents
●Factory assembled chassis 
●Pre-painted plastic body, complete with markings
●2.4GHz Perfex KT-531P 2.4GHz transmitter
●Front tread adjustment parts set
●Front suspension adjustment spacers
●Pinion gears 6T, 7T, 8T, 9T
●Wheel wrench
●Pinion gear tool
●Spare nuts
●Pairing stick
●Tires, wheels
●Mini pylons

Required for Operation
●AAA-size alkaline batteries or Ni-MH batteries for chassis x4
●AAA-size alkaline batteries for transmitter x4

199.47€  Inc Tax
Mini-Z RWD McLaren P1 GTR (W-MM/KT531P) - white and red (K.32324WR)

RWD chassis with new transmitter combination launches a new series to follow the MR-03

With just 8 x AAA-size batteries, the MINI-Z Racer allows anyone to enjoy the beautiful style and advanced performance of R/C cars. First launched in 2013, Kyosho has renewed the MINI-Z Racer Sports MR-03 concept to be even more user-friendly and appealing to more drivers with the MINI-Z RWD Series! Widely popular body styles in highly detailed body sets create the incredibly realistic model lineup. Including the latest Syncro KT-531P transmitter with steering trim, throttle trim, dual rate, LED control function, the sponge grip of the steering wheel provides comfortable fit for precision control feel. The set also includes a car body finished to display-model standard that matches stunning style with the performance, reliability and durability of the MR-03 chassis. The new control program on the newly designed circuit board realizes linear handling characteristics and can be further enhanced for even easier control by installing the optional gyro unit (MZW431). This series represents the perfect package for a deep dive into the amazing world of R/C cars!
*Syncro KT-531P transmitter uses FHSS 2.4GHz and is not compatible with existing ASF/MHS/FHS 2.4GHz systems.


●New series includes the newly developed Syncro KT-531P transmitter with multiple setting options.
●New circuit board with newly developed control program realizes dramatically improved steering feel.
●Highly detailed display-standard body is fully factory finished. 
●Compatible with all MINI-Z Racer body styles. **Motor case and diff gear assembly to suit body are required to be purchased separately.
●Front suspension incorporates VCS that optimizes camber angle with suspension stroke.
●Compatible with optional gyro unit (MZW431). Volume of gyro effect can be adjusted on the chassis. (**Settings can be adjusted from the transmitter if using KT-432PT transmitter (sold separately)).
●Compatible with optional LED light unit clear & red (MZW429R).

 

■Length 158.0mm 
■Width 71.8mm 
■Height 44.5mm 
■Wheelbase 94.0mm (L)
■Chassis RWD (MR-03)
■Front Wheel Offset Narrow +1.5mm (for RWD)
■Rear Wheel Offset Wide +1.5mm (for RWD)
■R/C System Syncro KT-531P


Readyset Contents
●Factory assembled chassis 
●Pre-painted plastic body, complete with markings
●2.4GHz Perfex KT-531P 2.4GHz transmitter
●Front tread adjustment parts set
●Front suspension adjustment spacers
●Pinion gears 6T, 7T, 8T, 9T
●Wheel wrench
●Pinion gear tool
●Spare nuts
●Pairing stick
●Tires, wheels
●Mini pylons

Required for Operation
●AAA-size alkaline batteries or Ni-MH batteries for chassis x4
●AAA-size alkaline batteries for transmitter x4

199.47€  Inc Tax
Mini-Z RWD Ferrari La Ferrari (W-MM/KT531P) - red (K.32320-224R)

RWD chassis with new transmitter combination launches a new series to follow the MR-03

With just 8 x AAA-size batteries, the MINI-Z Racer allows anyone to enjoy the beautiful style and advanced performance of R/C cars. First launched in 2013, Kyosho has renewed the MINI-Z Racer Sports MR-03 concept to be even more user-friendly and appealing to more drivers with the MINI-Z RWD Series! Widely popular body styles in highly detailed body sets create the incredibly realistic model lineup. Including the latest Syncro KT-531P transmitter with steering trim, throttle trim, dual rate, LED control function, the sponge grip of the steering wheel provides comfortable fit for precision control feel. The set also includes a car body finished to display-model standard that matches stunning style with the performance, reliability and durability of the MR-03 chassis. The new control program on the newly designed circuit board realizes linear handling characteristics and can be further enhanced for even easier control by installing the optional gyro unit (MZW431). This series represents the perfect package for a deep dive into the amazing world of R/C cars!
*Syncro KT-531P transmitter uses FHSS 2.4GHz and is not compatible with existing ASF/MHS/FHS 2.4GHz systems.


●New series includes the newly developed Syncro KT-531P transmitter with multiple setting options.
●New circuit board with newly developed control program realizes dramatically improved steering feel.
●Highly detailed display-standard body is fully factory finished. 
●Compatible with all MINI-Z Racer body styles. **Motor case and diff gear assembly to suit body are required to be purchased separately.
●Front suspension incorporates VCS that optimizes camber angle with suspension stroke.
●Compatible with optional gyro unit (MZW431). Volume of gyro effect can be adjusted on the chassis. (**Settings can be adjusted from the transmitter if using KT-432PT transmitter (sold separately)).
●Compatible with optional LED light unit clear & red (MZW429R).

 

■Length 158.0mm 
■Width 71.8mm 
■Height 44.5mm 
■Wheelbase 94.0mm (L)
■Chassis RWD (MR-03)
■Front Wheel Offset Narrow +1.5mm (for RWD)
■Rear Wheel Offset Wide +1.5mm (for RWD)
■R/C System Syncro KT-531P


Readyset Contents
●Factory assembled chassis 
●Pre-painted plastic body, complete with markings
●2.4GHz Perfex KT-531P 2.4GHz transmitter
●Front tread adjustment parts set
●Front suspension adjustment spacers
●Pinion gears 6T, 7T, 8T, 9T
●Wheel wrench
●Pinion gear tool
●Spare nuts
●Pairing stick
●Tires, wheels
●Mini pylons

Required for Operation
●AAA-size alkaline batteries or Ni-MH batteries for chassis x4
●AAA-size alkaline batteries for transmitter x4

199.47€  Inc Tax
Mini-Z RWD Chevrolet Corvette ZR1 (W-MM/KT531P + LEDs) - Sebring Orange (K.32334OR)

RWD chassis with new transmitter combination launches a new series to follow the MR-03

With just 8 x AAA-size batteries, the MINI-Z Racer allows anyone to enjoy the beautiful style and advanced performance of R/C cars. First launched in 2013, Kyosho has renewed the MINI-Z Racer Sports MR-03 concept to be even more user-friendly and appealing to more drivers with the MINI-Z RWD Series! Widely popular body styles in highly detailed body sets create the incredibly realistic model lineup. Including the latest Syncro KT-531P transmitter with steering trim, throttle trim, dual rate, LED control function, the sponge grip of the steering wheel provides comfortable fit for precision control feel. The set also includes a car body finished to display-model standard that matches stunning style with the performance, reliability and durability of the MR-03 chassis. The new control program on the newly designed circuit board realizes linear handling characteristics and can be further enhanced for even easier control by installing the optional gyro unit (MZW431). This series represents the perfect package for a deep dive into the amazing world of R/C cars!
*Syncro KT-531P transmitter uses FHSS 2.4GHz and is not compatible with existing ASF/MHS/FHS 2.4GHz systems.


●New series includes the newly developed Syncro KT-531P transmitter with multiple setting options.
●New circuit board with newly developed control program realizes dramatically improved steering feel.
●Highly detailed display-standard body is fully factory finished. 
●Compatible with all MINI-Z Racer body styles. **Motor case and diff gear assembly to suit body are required to be purchased separately.
●Front suspension incorporates VCS that optimizes camber angle with suspension stroke.
●Compatible with optional gyro unit (MZW431). Volume of gyro effect can be adjusted on the chassis. (**Settings can be adjusted from the transmitter if using KT-432PT transmitter (sold separately)).
●Compatible with optional LED light unit clear & red (MZW429R).

 

■Length 158.0mm 
■Width 71.8mm 
■Height 44.5mm 
■Wheelbase 94.0mm (L)
■Chassis RWD (MR-03)
■Front Wheel Offset Narrow +1.5mm (for RWD)
■Rear Wheel Offset Wide +1.5mm (for RWD)
■R/C System Syncro KT-531P


Readyset Contents
●Factory assembled chassis 
Front and rear LED lights for body shell
●Pre-painted plastic body, complete with markings
●2.4GHz Perfex KT-531P 2.4GHz transmitter
●Front tread adjustment parts set
●Front suspension adjustment spacers
●Pinion gears 6T, 7T, 8T, 9T
●Wheel wrench
●Pinion gear tool
●Spare nuts
●Pairing stick
●Tires, wheels
●Mini pylons

Required for Operation
●AAA-size alkaline batteries or Ni-MH batteries for chassis x4
●AAA-size alkaline batteries for transmitter x4

199.47€  Inc Tax
LIGHT UNIT SET Mini-Z MR03 SPORTS (K.MZW429R)
Light Unit SET for Mini-Z

AWD, FWD, RWD, MR-03 EVO


12.20€  Inc Tax
Kyosho SYNCRO KT231P+ (TX) + KR331 (RX) (K.82144B-1)

Kyosho SYNCRO KT231P+ (TX) Surface Transmitter + KR331 (RX) 3-channel Surface Receiver

49.41€  Inc Tax
Kyosho Dish Wheel 1:8 Inferno MP9 TKI4-MP10 - Orange (4 pcs.) (K.IFH006KO)
Kyosho Dish Wheel 1:8 Inferno MP9 TKI4-MP10 - Orange (4 pieces)

24.40€  Inc Tax
Kyosho Inferno NEO 3.0 1:8 RC Nitro READY SET - Green T4 (K.33012T4B)
Go anywhere, anytime!

Just add fuel and batteries and let this fully-fledged racing buggy run free

With 8 World Championship titles, the ‘Inferno’ is proud to be KYOSHO’s flagship model. Infused with Inferno DNA, the Inferno NEO 3.0 is ready to race almost as soon as it’s out of the box and brings the Inferno’s glorious performance potential within reach of everyone. While excelling on racing circuits, the NEO 3.0 also runs through rough terrain like a boss with features such as the user-friendly KE21SP engine with recoil pull starter and Big Bore Shocks with the omnipotent KC Cross Tires that deliver an optimal balance of performance and running stability on any surface. Based on the competition-level chassis, the NEO 3.0 promises exceptional reliability and durability plus wide scope for setting adjustments and custom performance upgrades through the huge range of optional parts available for the MP7.5 series. Experiencing the thrill of engine-powered off-road buggy racing has been made easy with the Inferno NEO 3.0!

Just add fuel and batteries to this Readyset and let the engine-powered racing buggy fun begin!
  • Equipped with four-wheel double wishbone suspension.
  • Universal swing shafts are standard on the front drive section and minimize drive loss and improve crash resistance.
  • Gear diffs on center, front and rear ensure optimal driving force is transferred to all four wheels.
  • Double disc brakes provide the stopping power needed for a large racing machine.
  • Sealed mechanical box protects the battery and receiver from crashes, sand and dust.

Technical data
  • Length 469mm
  • Width 307mm
  • Height 189mm
  • Wheelbase 325.5mm
  • Tread (F/R) 258mm/261mm 
  • Tire (F/R) φ116×44mm/φ116×44mm 
  • Gear Ratio 11.56:1 
  • Weight 3,400g (approx.)
  • Engine KE21SP
  • Transmitter 2.4GHz Syncro KT-231P+

Readyset Contents
Factory assembled chassis complete with control linkages
Finished body complete with printed color scheme 
2.4GHz Syncro KT-231P+ transmitter 
1.5、2.0、2.5、3.0mm L shaped hex wrenches 
Cross wrench
17mm wheel wrench

Required for Operation
Glow fuel
8 x AA size alkaline batteries for transmitter and receiver
Engine starting tools (fuel bottle, plug heater)

386.74€  Inc Tax
Rear Stabilizer Bar 2,8mm - Inferno MP7.5/NEO/VE (K.IF117)
Rear Stabilizer Bar 2,8mm INFERNO NEO 3.0 MP7.5 VE (Kyosho)

For Models:
  • Inferno NEO 3.0
  • Inferno VE
  • Inferno MP7.9

19.52€  Inc Tax
Front Sway Bar/Stabilizer Set - Inferno NEO (K.IFW104B)
Front sway bar set (stabilizer bars) INFERNO NEO 3.0 MP7.5 VE (Kyosho)

3 stabilizer bars and attachment links (2.0mm/2.3mm/2.5mm)

For Models:
  • Inferno NEO
  • Inferno 777

21.35€  Inc Tax
Kyosho Dampers Pit Holder with Magnet (K.36218)
Kyosho Dampers Pit Holder with Magnet

12.20€  Inc Tax
Kyosho Front Shock Stay Inferno NEO IF310GM (Gun Metal) (K.IF310GM)
Kyosho Front Shock Stay Inferno NEO IF310GM

Colour: Gun Metal

11.59€  Inc Tax
Kyosho Body Retaining Pins (Large, 1 piece) (K.970021)
Kyosho Body Retaining Pins for Onroad and Offroad (1/8 and 1/10) FM29

Size: large
Lenght: 28mm
Thickness: 1.5mm

1 piece

0.61€  Inc Tax
Kyosho Body Retaining Pins (Small, 1 piece) (K.926381)
Kyosho Body Retaining Pins for Onroad and Offroad (1/8 and 1/10)

Size: small
Lenght: 21mm
Thickness: 1.15mm

1 piece

0.61€  Inc Tax
Kyosho Body Retaining Pins (Small, 10 pieces) (K.92638)
Kyosho Body Retaining Pins for Onroad and Offroad (1/8 and 1/10)

Size: small
Lenght: 21mm
Thickness: 1.15mm

10 pieces

4.88€  Inc Tax
Kyosho Air Filter Set for KE15SP Engine (K.74033-13)
Kyosho Air Filter Set for KE15SP Engine

Air Cleaner Set for .15 engines

7.32€  Inc Tax
Kyosho Air Filter Sponge Set for KE15SP Engine (3 pieces) (K.74033-13-1)
Kyosho Air Filter Sponge Set for KE15SP Engine

Air Cleaner Sponge for .15 engines (3 pieces)

6.71€  Inc Tax
Kyosho HD Air Cleaner Sponge Set (2 pieces) (K.92304-1)
Kyosho Air Filter Sponge Set for .21 and .25 engines

HD Air Cleaner Sponge Set (2 pieces)

9.76€  Inc Tax
Kyosho Rear Shock Stay Inferno NEO (gun metal) (K.IF311GM)
Kyosho Rear Shock Stay

Spare parts for Inferno MP777/NEO 2.0/3.0 (gun metal)

17.69€  Inc Tax
Kyosho Upper Suspension Arm - Inferno MP7.5 (K.IF123)
Kyosho Upper Suspension Arm

Spare parts for Inferno NEO 2.0/3.0

14.64€  Inc Tax
Kyosho Front Lower Suspension Arm - Inferno NEO (K.IF233)
Kyosho Front Lower Suspension Arm

Spare parts for Inferno NEO

9.76€  Inc Tax
Kyosho Rear Lower Suspension Arm - Inferno NEO (K.IF234B)
Kyosho Rear Lower Suspension Arm

Spare parts for Inferno NEO

9.76€  Inc Tax
Per Page      1 - 30 of 42