RC Electronics

Two-pin battery connector

Packaging: 1 piece / BEC / JST connector

Use this connector for radio controlled (RC) airplanes, helicopters, cars, trucks, buggies, boats and other models

Two-pin battery adapter with gold-plated contacts

Packaging: 1 piece / XT60 (male) - Deans/T-plug (female)

Use this connector adapter for radio controlled (RC) airplanes, helicopters, cars, trucks, buggies, boats and other models

Two-pin battery adapter with gold-plated contacts

Packaging: 1 piece / XT60 (male) - Traxxas (female)

Use this connector adapter for radio controlled (RC) airplanes, helicopters, cars, trucks, buggies, boats and other models

Gold-plated connector G6.0mm with segmented elastic pin.

Packaging: 1 pair

Use this connector for radio controlled (RC) airplanes, helicopters, cars, trucks, buggies, boats and other models

Graupner flat cable, three-core with PVC insulation

Conductor cross-section 0.25 mm2
External dimensions 1.5x4.8 mm
Max. 48 V, 5A.

Package: 10 meters

Flat extension lead / cable without connectors.

Use for radio controlled (RC) model airplanes, helicopters, cars, trucks, buggies, boats and other applications.

Gold-plated Traxxas connector

Packaging: 1 piece (female)

Use this connector for radio controlled (RC) airplanes, helicopters, cars, trucks, buggies, boats and other models

Gold-plated Traxxas connector

Packaging: 1 piece (male)

Use this connector for radio controlled (RC) airplanes, helicopters, cars, trucks, buggies, boats and other models

Konect XT60 charging cable for LiPo batteries with EC5 connector

XT60 (female) and EC5 (male) connector / AWG 14 cables

Use this adaptor cable for charging the batteries for radio controlled (RC) airplanes, helicopters, cars, trucks, buggies, boats and other models.

Konect XT60 charging cable for LiPo batteries with EC3 connector

XT60 (female) and EC3 (male) connector / AWG 14 cables

Use this adaptor cable for charging the batteries for radio controlled (RC) airplanes, helicopters, cars, trucks, buggies, boats and other models.

Konect XT60 charging cable for LiPo batteries with XT90 connector

XT60 (female) and XT90 (male) connector / AWG 14 cables

Use this adaptor cable for charging the batteries for radio controlled (RC) airplanes, helicopters, cars, trucks, buggies, boats and other models.

XT60 charging cable for LiPo batteries, end tin plated (no connector on the other side)

AWG 14 silicone cable with XT60 connector (female)

Use this adaptor / charging cable for charging the batteries for radio controlled (RC) airplanes, helicopters, cars, trucks, buggies, boats and other models and model accessories.

4mm gold (Banana) charging cable for LiPo batteries with MPX (Multiplex) connector - 300mm

Package: 4mm connectors (male) / MPX connector (male) / AWG 14 cable

Use this adaptor cable for charging the batteries for radio controlled (RC) airplanes, helicopters, cars, trucks, buggies, boats and other models.

Hitec Servo Wing Mount Set (HS-80/81/82)

Product Description
This is a universal mount designed to accept almost any micro servo. The top of the mount features an aerodynamic fairing designed to streamline airflow around the servo linkage.


Specifications:
Diameter (mm): 50
Thickness (mm): 14
Thickness with the fairing (mm): 28

Use this wing servo mount (servo mounting bracket) for radio controlled (RC) airplanes, gliders, hotliners, and other models.

Servo Lead Safety Clip

Package: 10 pieces

Secure servo connections on your (RC) radio controlled models.

Use this servo lead safety clip for secure connection between servo connectors on radio controlled (RC) airplanes, helicopters, drones, cars, buggies, trucks, crawlers and other models.

FOXY G3 C2826-750

FOXY brushless motors are 14-pole rotary casing electric motors with excellent electrical properties featuring a very sophisticated design and high-end manufacturing. Hardened steel shafts and high-quality bearings ensure a long service life, while the quality of materials used to make the stator on the rotor also guarantees excellent performance at a high efficiency. They are low-speed, high-torque engines that handle large diameter propellers and pitches without the need for gearboxes.

Engine marking system: CxxYY / zzzz
C - brushless motor ("outrunner", "circular")
xx - stator diameter in mm
YY - stator length in mm
zzzz - revolutions per volt (rpm/V), "KV"

The engine set includes:
FOXY G3 C2826-750 brushless motor with 3.5mm gold-plated connectors, rear and front mounting kit and an instruction manual.

Engine Mounting:
The FOXY G3 C2826-750 is designed for both front and rear mounting. For front mounting at the front of the motor use at least two (opposite) or four bolts. The rear mounting kit (mounting cross, tail propeller) is also supplied with the engine.

The marking according to the engine dimensions: C3548; The marking according to the stator dimensions: C2826

Specifications:
No. of (LiXX) cells: 3-5
Motor Kv: 750 rpm/V
Max power (30s/5S Lipo): 580W
No-load current (3S): 2.1A
Max peak current (30s): 42A
Diameter: 35mm
Length: 50.7mm
Shaft diameter: 5mm
Weight: 172g
Magnet poles: 14
Motor timing: 15-25deg
Regulator: 50-60A

Application:
Gliders up to: 2700g
Trainers up to: 2600g
Acro planes up to: 2300g
3D airplanes up to: 1500g

Recommended propellers:
4S: 13X6,5”
5S: 11X6”

4mm gold (banana) charging cable for LiPo and other batteries with XT90 (male) connector.

AWG 14 silicone cable with 4mm gold (banana) connector - XT90 (male)

Use this adaptor / charging cable for charging the batteries for radio controlled (RC) airplanes, helicopters, cars, trucks, buggies, boats and other models and model accessories.

Muldental Elektronik Highly flexible 0,50 mm2 silicone power cable with black electrical insulation.

Stranded wire from 516 strands 0.05 mm
Outer diameter: 2.3 mm
Max voltage: 48 V
Continuous current load: 18.2A
Peak current (5min): 31.3A

Made in Germany

Glow Clip Charging Cable with 4mm banana connectors

Graupner ON/OFF Switch with leads

Twisted Servo Extension Cable (300mm)

Twisted Extension cable with JR connectors (0.25mm2). The connector is fitted with a snap-on clip to secure the connector inside.

Gold-plated connector G8.0mm with segmented elastic pin with max. load 170A (long-term 80A)

For cables up to 13.3 mm2 (6 AWG)
Transition resistance 0.15 mOhm, max. 500 V

Packing: 1 pair

Two-pin power connector with flat gold-plated contacts with max. load 50A (long term 25A) with rounded grooved body for better grip and protection.

For cables up to 3.3 mm2 (12 AWG)
Transition resistance 0.45 mOhm, max. 500V

Packaging: 1 pair with cable cover

High current gold-plated connector G6 mm with segmented elastic pin

Packing: male (2 pcs), female (2 pcs)

Servo connector - suitable for JR / Graupner

Package: 1 piece crimp connector (female)

Use for radio controlled (RC) airplanes, helicopters, cars, trucks, buggies, boats and other models.

Heat Shrink Tube 6mm

Red and black
Length: 25cm each