RC Electronics

SkyRC XT60 charging cable for LiPo battery with EC3 connector

XT60 (female) and EC3 (male)

OPTI Charge Lead 2S 12awg 610mm + JST-XH3P 22AWG 660mm Balance Connector – Red

Connectors: 4mm gold connectors stepped to 5mm

Konect 4mm gold (Banana) charging cable for LiPo battery with EC3 connector - 150mm

4mm Gold Connectors (male) and EC3 (male)

Konect 4mm gold (Banana) charging cable for battery with Traxxas connector - 150mm

4mm Gold Connectors (male) and Traxxas (male)

Radiolink R12DS 12-Channel Receiver 2.4GHz

Use for Radiolink transmitters AT9, AT9S, AT9S Pro, AT10 and AT10II.

4000 Meters Control Distance
DSSS and FHSS hybrid spread spectrum, 16 channels pseudo-random frequency hopping, and QPSK modulation ensures excellent anti-interference performance, highly constant, and stable transmission signal present on all 12 channels of R12DS.
4KM Range enables all possible RC fun.
The maximum PWM jitter is 1.84us with a standard of just 0.5us.

R12DS Receiver:
Channels:
- 11 channels for PWM signal output
- 12 channels for SBUS&PWM signal output.
Working voltage: 4.8-10V
Working current: 38-45mA（input voltage: 5V）
Size: 50 x 32 x 14.5mm
Weight: 14g
4096 section precision, 0.25us per section, servo anti-shake rudder.
Control distance: approx. 4000m in the air.

Receiver integrate telemetry sensor including signal strength and voltage. Support extended engine voltage telemetry module PRM-01 and module PRM-02 can feedback GPS info, Speed, voltage etc. on AT9/AT9S/AT9S Pro/AT10/AT10II display when work with flight controller APM or PIX.

Package Including:
1x R12DS Receiver

Radiolink PRM-01 Voltage Telemetry Module

Real-time Telemetry
Real-time model data feedback allows users to receive crucial information on the model's systems.
When paired with flight module PRM-01, model voltage is displayed.
Configurable sound/message/vibration alarms signal potential problems when low model voltage. A low model voltage alarm value can be customized.

Real-time Model Voltage Telemetry Module
Model: PRM-01
Dimensions: 33 x 22 x 11mm
Weight (with wire): 7g
Voltage Input Range: 1S - 6S LiPo Battery
Compatible receiver: R12DS, R9DS (Old version receiver: R10DS, R10D, R9D)
Compatible transmitter: AT10II/AT10/AT9S Pro/AT9S/AT9
Configurable sound/message/vibration alarms signal for low voltage (customizable).

Package Including:
1x Real-time Model Voltage Telemetry Module PRM-01

Extreme Flight aluminum servo arm 1.5"

Length: 38.1mm
Internal Thread: M3
Servo spline: 25T

Servo arm / control horn for use in radio controlled (RC) airplanes and and other models. 

Extreme Flight aluminium servo arm 3"

Length: 76.2mm
Internal Thread: M3
Servo spline: 25T

Dual servo arm / control horn for use in radio controlled (RC) airplanes and and other models. 

Extreme Flight aluminium servo arm 1.25"

Length: 31.7mm
Internal Thread: M2
Servo spline: 25T

Servo arm / control horn for use in radio controlled (RC) airplanes and and other models. 

Graupner aluminium servo arm

Length: 36mm
Internal Thread: M3
Servo spline: 25T

Servo arm / control horn for use in radio controlled (RC) airplanes, boats, cars and and other models. 

Hand-wound EGODRIFT Tengu 4035HT F3C Edition motor for training and competition with a rating of 540kV. The Special F3C Edition has ben developed, tested and refined together with the best Japanese pilots, incl. World Championship contestant Masatoshi Iso. Offering precise and linear response for smooth, controlled operation in any 750-760 sized F3C heli model such as the: Goblin Urukay, Quest Impaction, Align T-Rex 760, Prodrone PDH-02C, Hirobo Eagle 4, RVE Merak E750, XLPower E-Wraith and alike.

Hand-wound EGODRIFT Tengu 4035HT F3C Edition motor for training and competition with a rating of 540kV. The Special F3C Edition has ben developed, tested and refined together with the best Japanese pilots, incl. World Championship contestant Masatoshi Iso.

Offering precise and linear response for smooth, controlled operation in any 750-760 sized F3C radio controlled helicopter (heli) model such as the: Goblin Urukay, Quest Impaction, Align T-Rex 760, Prodrone PDH-02C, Hirobo Eagle 4, RVE Merak E750, XLPower E-Wraith and others.

Like all models within the Tengu series, the top of the can features the iconic and heat-resistant EGODRIFT Stickerbomb design, to add the finishing touch to your f3c heli build.

Each motor comes with mounting screws and an (optional) screw for additional securing of the bell.

SPECIFICATIONS
Manufacturer: EGODRIFT
Stator size: 4035
Motor configuration: 12N10P
Motor weight: 480g
Base Colour: Black
Wire colour: Copper
Motor wire type: High temperature copper wire
Motor wire: 1.3mm
Motor shaft: Hardened Steel
LiPo cells: 12S
Motor kV: 540 kV
Stator diameter: 40 mm
Stator height: 35 mm
Stator lamination: 0.15 mm (+)
Body Length: 60mm (2.36 inch)
Diameter: 49.6mm
Screw hole diameter: 3,0 mm
Motor hole pattern: 25mm, 30mm
Idle current: 4.0A
Maximum Current: 110A (128A Peak / 2 seconds)
Maximum Power: 4840W (Peak: 5632W / 2 seconds)
Internal resistance: 28 mOhm
Connection: Wire / Gold plated plugs
Designer: Yutao Zou

Servo connector - suitable for FUT / Futaba

Package: 1 piece crimp connector (female)

Use for radio controlled (RC) airplanes, helicopters, cars, trucks, buggies, boats and other models.

Servo connector - suitable for JR / Graupner

Package: 1 piece crimp connector (male)

Use for radio controlled (RC) airplanes, helicopters, cars, trucks, buggies, boats and other models.

Servo connector - suitable for JR / Graupner with blue housing

Package: 1 piece crimp connector (male)

Use for radio controlled (RC) airplanes, helicopters, cars, trucks, buggies, boats and other models.

Black Housing for MPX Connector (4 pcs)

Package: 4 pieces

Use for quick wing assembly or or attach to the fuselage for quick servo connection with the wings in radio controlled (RC) airplanes, helicopters, cars, trucks, buggies, boats and other models.

MPX 8-pin high current connector

Package: 1 pair

High quality MPX 8-pin connector with gold-plated solder contacts.

Current rating:

• 6A / 24h
• 8A / 5min
• 10A / 3s

Use for quick wing assembly or attach to the fuselage for quick servo connection with the wings in radio controlled (RC) airplanes, helicopters, cars, trucks, buggies, boats and other models. It can be used together with solder board for easy wiring (8GR71294-1).

PCB for MPX 8-pin high current connector

Package: 1 piece

High quality double-sided PCB for MPX 8-pin connector. For soldering of servo extension cables and their mechanical securing.

Use for quick wing assembly or attach to the fuselage for quick servo connection with the wings in radio controlled (RC) airplanes, helicopters, cars, trucks, buggies, boats and other models. It can be used together with the MPX 8-pin connector (1M71285).

SRT W35 Digital Coreless HV Waterproof Servo

Specifications:
Torque (6.0V): 25.0 kg-cm
Torque (8.4V): 35.0 kg-cm
Speed (6.0V): 0.15s
Speed (8.4V): 0.10s
Operating Voltage: 6.0 ~ 8.4 DC Volts
Bearing: Dual BB
Working Frequence: 1520μs / 330hz
Weight: 82.5 g (1.98 oz)
Motor Type: Coreless
Gear Type: Titanium & Steel
Size: 40.7x20.5x38.6 mm


Use this servo for radio controlled (RC) airplanes and models requiring high torque and precision. Due to its waterproof case this standard-sized servo is also suitable for trucks, buggies, crawlers and other models. It features a 25T output spline.

Heat Shrink Tube 8mm

Red and black
Length: 25cm each

Radiolink Trainer Cable


Use this accessory for radio controlled (RC) airplanes, helicopters and other models.

Two-pin power connector with gold-plated contacts

Packaging: 10 pcs

Use this connectors for radio controlled (RC) airplanes, helicopters, cars, trucks, buggies, boats and other models

Two-pin power connector with gold-plated contacts

Packaging: 10 pcs

Use this connectors for radio controlled (RC) airplanes, helicopters, cars, trucks, buggies, boats and other models

Two-pin power connector with gold-plated contacts

Packaging: 5 plugs and 5 sockets (10 pcs / female and male XT60 connectors)

Use this connectors for radio controlled (RC) airplanes, helicopters, cars, trucks, buggies, boats and other models

Two-pin power connector with gold-plated contacts

Packaging: XT60 female connector / 1 pc

Use this connectors for radio controlled (RC) airplanes, helicopters, cars, trucks, buggies, boats and other models

Two-pin power connector with gold-plated contacts

Packaging: XT90 male conncectors / 10 pieces

Use this connectors for radio controlled (RC) airplanes, helicopters, cars, trucks, buggies, boats and other models

Two-pin power connector with gold-plated contacts

Packaging: XT90 male and XT90 female connector / 1 pair

Use this connectors for radio controlled (RC) airplanes, helicopters, cars, trucks, buggies, boats and other models

Two-pin power connector with gold-plated contacts

Packaging: XT90 female connector with protective cover / 1 piece

Use this connectors for radio controlled (RC) airplanes, helicopters, cars, trucks, buggies, boats and other models

Two-pin power connector with gold-plated contacts

Packaging: XT90 female anti-spark connector with protective cover / 1 piece

Use this connectors for radio controlled (RC) airplanes, helicopters, cars, trucks, buggies, boats and other models

Tamiya Plug (male)

Packaging: Tamiya connector with gold contacts / 1 piece

Use this connectors for radio controlled (RC) airplanes, helicopters, cars, trucks, buggies, boats and other models

High current gold-plated G4 mm connectors

Packing: male (2 pcs), female (2 pcs)

Use this connectors for radio controlled (RC) airplanes, helicopters, cars, trucks, buggies, boats and other models