Search

Muldental Elektronik Highly flexible 10.00 mm2 silicone power cable with red electrical insulation.

Stranded wire from 1260 strands 0.1 mm
Outer diameter: 6.5 mm
Max voltage: 48 V
Continuous current load: 73A
Peak current (5min): 126A

Made in Germany

Muldental Elektronik Highly flexible 0,50 mm2 silicone power cable with red electrical insulation.

Stranded wire from 270 strands 0.05 mm
Outer diameter: 1.5 mm
Max voltage: 48 V
Continuous current load: 7.5A
Peak current (5min): 20.5A

Made in Germany

Muldental Elektronik Highly flexible 1,00 mm2 silicone power cable with red electrical insulation.

Stranded wire from 516 strands 0.05 mm
Outer diameter: 2.3 mm
Max voltage: 48 V
Continuous current load: 18.2A
Peak current (5min): 31.3A

Made in Germany

Muldental Elektronik Highly flexible 4.00 mm2 silicone power cable with red electrical insulation.

Stranded wire from 1020 strands 0.07 mm
Outer diameter: 4.2 mm
Max voltage: 48 V
Continuous current load: 42.5A
Peak current (5min): 73.2A

Made in Germany

Muldental Elektronik Highly flexible 6.00 mm2 silicone power cable with red electrical insulation.

Stranded wire from 1561 strands 0.07 mm
Outer diameter: 4.8 mm
Max voltage: 48 V
Continuous current load: 54.5A
Peak current (5min): 95.3A

Made in Germany

Sintered Fuel Filter

Dimensions:
ø 10.2 mm x length 37 mm

Sintered Fuel Filter (Standard size)

Dimensions:
ø 11 mm x length 37 mm

Sintered Fuel Filter (Big size)

Dimensions:
ø 11 mm x length 42 mm

Graupner Micro Infrared Thermometer (pen shape).

REDS Racing V3.0 Tetra Aluminum Clutch - 32mm (without bell)

Fully Adjustable
REDS new clutch system comes with 3 preload adjustments on the front plate to fit any type of ground and engine output. You can change the spring preload on the front plate from H to M and to L (High, Medium and Low position). The 1.1mm spring was introduced (available as an optional part) to further increase the number of setup combinations to best suit your driving style and track conditions.

The new clutch system features a new dust-proof flywheel which has been improved compared to its previous version to protect the engine front bearing from dirt even on high-dust conditions.

The new 7075 Aluminum and Carbon clutch shoes have been redesigned to increase wear resistance. In addition, the new shoes are lighter to allow and engage at higher revs and lower inertia to rotation. V3.0 Clutch System comes with 4 alu shoes and 1.0 mm springs. Other parts are available as an upgrade.

2 different models of the V3.0 Clutch has been developed and both are available with 32mm and 34mm diameter to make it suitable for different car models.

​ Aluminum Clutch: medium inertia, good on all type of track layouts.
Steel Clutch: high inertia, recommended for low grip tracks.

​ Suitable for any type of car (Off-Road Buggy and Truggy)
32 mm for Kyosho, JQ, Team Associated, Hot Bodies, Serpent, Xray.
34 mm for Sworkz, Mugen, Team Losi, Agama, Tekno.

The original REDS bell can be used with all types of cars named above.

OPTI Charge Lead 2S 12awg 610mm + JST-XH3P 22AWG 660mm Balance Connector – Red

Connectors: 4mm gold connectors stepped to 5mm

Graupner Silicone Fuel Tubing - red, yellow or green

Size: 5mm outer and 2mm inner diameter
Length: 1m

Silicone fuel line/hose for radio controlled model engines. Use for glow fuel.