Search

Graupner Motor Mounting bracket

Fits .60/.95 sized engines

Dimension: 101x68mm
Weight: 125g with mounting hardware

Silicone exhaust deflector 45° 6mm

Graupner OILIT Gasket Sheet / Sealing Material 

Thicknes: 0.5mm
Heat resistance: min. 400C
Sheet size: 150x105mm

Ideal material for trimming custom engine exhaust gaskets.

Graupner Remote Glow Plug Clip/Connector with short neck

Spring loaded glow plug clip
Length: 75mm

Graupner Black Neoprene Fuel Tubing

Size: 5mm outer and 3mm inner diameter
Length: 1m

Black neoprene fuel hose for radio controlled model engines. Use for gasoline, diesel, or glow fuel.

Graupner Black Neoprene Fuel Tubing

Size: 4.5mm outer and 2.5mm inner diameter
Length: 1m

Black neoprene fuel hose for radio controlled model engines. Use for gasoline, diesel, or glow fuel.

Graupner Silicone Fuel Tubing

Size: 5mm outer and 2mm inner diameter
Length: 1m

Silicone fuel line/hose for radio controlled model engines. Use for glow fuel.

Graupner Fuel Line Clamp

Size: 6mm (3 pcs.)

Use with Neoprene/Silicone or Tygon fuel line/hose for radio controlled model engines.

Graupner ON/OFF Switch with leads

Graupner Quick Attach/Detach Wing Connector Kit

Graupner Micro Infrared Thermometer (pen shape).

Konect Maxi On/Off Switch with (XT60/JR/Graupner cable)

The Ming Yang Heavy Duty ON/OFF Switch Harness (JR/Graupner cable)

Graupner Ski Set for Husky 1800S

Can be used on a similar sized radio controlled model airplanes with approx. 1800mm wingspan.

Length: 330mm
Width: 65mm
Height: 40mm
Weight: 330g

(only ski set, RC model airplane not included)

Graupner Fuel Line Clamp

Size: 4mm (3 pcs.)

Use with Neoprene/Silicone or Tygon fuel line/hose for radio controlled model engines.

Graupner aluminium servo arm

Length: 36mm
Internal Thread: M3
Servo spline: 25T

Servo arm / control horn for use in radio controlled (RC) airplanes, boats, cars and and other models. 

Servo connector - suitable for JR / Graupner

Package: 1 piece crimp connector (female)

Use for radio controlled (RC) airplanes, helicopters, cars, trucks, buggies, boats and other models.

Servo connector - suitable for JR / Graupner

Package: 1 piece crimp connector (male)

Use for radio controlled (RC) airplanes, helicopters, cars, trucks, buggies, boats and other models.

Servo connector - suitable for JR / Graupner with blue housing

Package: 1 piece crimp connector (male)

Use for radio controlled (RC) airplanes, helicopters, cars, trucks, buggies, boats and other models.

Graupner Road Cone - Pylon 1/8 and M1/10

Package: 10 pieces


Use this accessory for radio controlled (RC) onroad and offroad cars, buggies and truck models.

Graupner Power Pack

Specification
Lipo: 1S / 3.7V
Capacity: 220mAh
Discharge Rating: 45C


Use this battery for radio controlled (RC) drones, helicopters, airplanes and other small models.

Graupner Lead Battery

Voltage: 6V
Capacity: 7Ah

Use this battery for radio controlled (RC) airplanes, helicopters, cars, buggies, trucks, crawlers and other model accessories.

Graupner Silicone Fuel Tubing - red, yellow or green

Size: 5mm outer and 2mm inner diameter
Length: 1m

Silicone fuel line/hose for radio controlled model engines. Use for glow fuel.

Graupner flat cable, three-core with PVC insulation

Conductor cross-section 0.25 mm2
External dimensions 1.5x4.8 mm
Max. 48 V, 5A.

Package: 10 meters

Flat extension lead / cable without connectors.

Use for radio controlled (RC) model airplanes, helicopters, cars, trucks, buggies, boats and other applications.

Graupner Aluminium Spinner 38mm / 2-blade

Use for radio controlled airplane models and mount with two-blade propeller.

Colour: Polished ALU
Size: 38mm