Search

Gold-plated connector G8.0mm with segmented elastic pin with max. load 170A (long-term 80A)

For cables up to 13.3 mm2 (6 AWG)
Transition resistance 0.15 mOhm, max. 500 V

Packing: 1 pair

Two-pin power connector with flat gold-plated contacts with max. load 50A (long term 25A) with rounded grooved body for better grip and protection.

For cables up to 3.3 mm2 (12 AWG)
Transition resistance 0.45 mOhm, max. 500V

Packaging: 1 pair with cable cover

5mm gold-plated connectors (10 pcs)

High current gold-plated connector G6 mm with segmented elastic pin

Packing: male (2 pcs), female (2 pcs)

Two-pin power connector with gold-plated contacts with max. load capacity of 30A.

For cables with a cross-section of max. 0.8 mm2 (18 AWG)
Transition resistance 0.65 mOhm, max. 500V

Packaging: 10 pcs

SkyRC XT60 charging cable for LiPo battery with EC5 connector

XT60 (female) and EC5 (male)

OPTI Charge Lead 2S 12awg 610mm + JST-XH3P 22AWG 660mm Balance Connector – Red

Connectors: 4mm gold connectors stepped to 5mm

Konect 4mm gold (Banana) charging cable for LiPo battery with EC3 connector - 150mm

4mm Gold Connectors (male) and EC3 (male)

Konect 4mm gold (Banana) charging cable for battery with Traxxas connector - 150mm

4mm Gold Connectors (male) and Traxxas (male)

Radiolink R12DS 12-Channel Receiver 2.4GHz

Use for Radiolink transmitters AT9, AT9S, AT9S Pro, AT10 and AT10II.

4000 Meters Control Distance
DSSS and FHSS hybrid spread spectrum, 16 channels pseudo-random frequency hopping, and QPSK modulation ensures excellent anti-interference performance, highly constant, and stable transmission signal present on all 12 channels of R12DS.
4KM Range enables all possible RC fun.
The maximum PWM jitter is 1.84us with a standard of just 0.5us.

R12DS Receiver:
Channels:
- 11 channels for PWM signal output
- 12 channels for SBUS&PWM signal output.
Working voltage: 4.8-10V
Working current: 38-45mA（input voltage: 5V）
Size: 50 x 32 x 14.5mm
Weight: 14g
4096 section precision, 0.25us per section, servo anti-shake rudder.
Control distance: approx. 4000m in the air.

Receiver integrate telemetry sensor including signal strength and voltage. Support extended engine voltage telemetry module PRM-01 and module PRM-02 can feedback GPS info, Speed, voltage etc. on AT9/AT9S/AT9S Pro/AT10/AT10II display when work with flight controller APM or PIX.

Package Including:
1x R12DS Receiver

Modell Studio Pivot Pinned Round Hinges - 3mm (5pcs)

High quality radio controlled (RC) airplane pivot hinges.

Precision injection molded 1/4th Scale nylon pin hinges with holes in each side for maximum hold in wood or foam.

Dimension: 39x20mm.
Hinges are preassembled.

Pack contents: 10pcs

Use for radio controlled (RC) airplane and other models.

Thin as paper yet can't easily be torn. Rounded corners for easy insertion. Secure with a few drops of cyanoacrylate.

Lite 0.15mm Thick.
Length: 25 mm.
Width: 20 mm.

Pack contents: 12pcs

Use in radio controlled (RC) aircraft models up to 6.5 cm³ (2-stroke engine).

Kavan Canopy Lock - Big with the spring

Length 33 mm
Height: 19.5 mm
Diameter: 5 mm

Pack contents: 1 piece

Use for radio controlled (RC) airplane and other models.

Kavan Canopy Lock - Small with the spring

Length 23 mm
Height: 16.5 mm
Diameter: 4.8 mm

Pack contents: 1 piece

Use for radio controlled (RC) airplane and other models.

Kavan Control Horn for radio controlled RC airplane models

Dimension: Medium - 30mm
Pack content: 5 pair

Kavan Control Horn for radio controlled RC airplane models

Dimension: Standard - 34mm
Pack content: 5 pair

Kavan Control Horn for radio controlled RC airplane models

Dimension: 1/4 Scale - 34mm (wide)
Pack content: 5 pair

Kavan Preassembled Push Rod

Dimension: M2
Length: 96cm
Pack content: 1 piece

Flexible/Soft Push Rod - 6cm of steel wire only on the clevis side

Preassembled push rod with metal clevis for radio controlled RC airplane and other models

Kavan Preassembled Push Rod

Dimension: M2
Length: 97cm
Pack content: 1 piece

Standard Push Rod - full length steel wire

Preassembled push rod with metal clevis for radio controlled RC airplane and other models

Kavan Metal Clevis with Threaded Coupler - M2

Dimension: M2
Pack content: 10 pieces

Made from high quality heavy gauge spring steel which doesn‘t fatigue with use. Nickel-plated for a rust free surface.

Use for radio controlled RC airplane and other models

Kavan Threaded Couplers for M2 metal clevis

Dimension: M2 / d=2.1mm
Pack content: 10 pieces

Made from high quality heavy gauge spring steel which doesn‘t fatigue with use. Nickel-plated steel for a rust free surface.
KAVAN Threaded Couplers are strong, easy to solder and have added strength due to the taper between the thread and base.

Use for radio controlled RC airplane and other models

Kavan Threaded Couplers for M2 metal clevis

Dimension: M2 / d=1.2mm
Pack content: 10 pieces

Made from high quality heavy gauge spring steel which doesn‘t fatigue with use. Nickel-plated steel for a rust free surface.
KAVAN Threaded Couplers are strong, easy to solder and have added strength due to the taper between the thread and base.

Use for radio controlled RC airplane and other models

Kavan Zinc-Plated Steel Push Rods for M2 metal/plastic clevises or ball links

Dimension: M2 / wire diameter = 1.7mm
Length: 200mm
Pack content: 10 pieces

High quality Zinc-Plated steel pushrods for metal or plastic clevises or ball links. Overall length 200mm. Thread length 15mm. Pushrod diameter 1,7mm with M2 thread on one end.

Use for radio controlled RC airplane and other models

Kavan Zinc-Plated Steel Push Rods for M3 metal/plastic clevises or ball links

Dimension: M3 / wire diameter = 2.6mm
Length: 200mm
Pack content: 10 pieces

High quality Zinc-Plated steel pushrods for metal or plastic clevises or ball links. Overall length 200mm. Thread length 15mm. Pushrod diameter 2,6mm with M3 thread on one end.

Use for radio controlled RC airplane and other models

Kavan Metal Clevis M3 with Zinc-Plated Steel Push Rod

Dimension: M3 / wire diameter = 2.6mm
Length: 200mm
Pack content: 10 pieces

Metal Clevis M3 with high quality Zinc-Plated steel pushrod for metal or plastic clevises or ball links. Overall length 200mm. Thread length 15mm. Pushrod diameter 2,6mm with M3 thread on one end.

Use for radio controlled RC airplane and other models

Kavan Zinc-Plated Solder Clevis without thread

Dimension: inner diameter 2mm
Pack content: 10 pieces

Made from high quality heavy gauge spring steel which doesn‘t fatigue with use. Zinc-plated for easy soldering.

Use for radio controlled RC airplane and other models

Kavan M3 Nylon Ball Link with Brass Ball

Dimension: M3
Ball Size: outer dia. 6mm / inner dia. 3mm
Pack content: 10 pieces

High quality nylon ball links for large radio controlled airplanes, large gas powered boats and off-road cars. Very strong and reliable joint that effortlessly swivels in the nylon socket. Nickel-plated ball

Use in radio controlled RC airplanes and other models for push rod assembly.

MP JET Cable coupler M2 

Dimension: M2
Pack content: 10 pieces

Cable coupler for use in radio controlled (RC) airplanes, boats and and other models for pull-pull control mechanism.

MP JET Threaded coupler for carbon tube

Dimension: inner dia. 5mm / M2 thread
Pack content: 2 pieces

Carbon or aluminum tube/rod threaded coupler for radio controlled airplanes, boats and and other RC models for use as a push rod control assembly, support or various other applications.