Search

Muldental Elektronik Highly flexible 10.00 mm2 silicone power cable with red electrical insulation.

Stranded wire from 1260 strands 0.1 mm
Outer diameter: 6.5 mm
Max voltage: 48 V
Continuous current load: 73A
Peak current (5min): 126A

Made in Germany

Muldental Elektronik Highly flexible 10.00 mm2 silicone power cable with black electrical insulation.

Stranded wire from 1260 strands 0.1 mm
Outer diameter: 6.5 mm
Max voltage: 48 V
Continuous current load: 73A
Peak current (5min): 126A

Made in Germany

Twisted Servo Extension Cable (300mm)

Twisted Extension cable with JR connectors (0.25mm2). The connector is fitted with a snap-on clip to secure the connector inside.

RadioLink R8EF 8ch 2.4GHz FHSS Receiver

R8EF Receiver:
Channel: 8ch
Operating voltage: 4.9-10V
Operating current: 19-25mA (input voltage 5V)
Size: 48.5x21x11mm
Weight: 7g
Feature: Fail-safe
Section precision: 4096
Signal output: S-BUS, PPM and PWM
Signal mode: Green LED, output 8 channel PWM signal
SBUS/PPM signal mode: Both red and green LED on, CH1 output S-BUS signal, CH2 output PPM signal, CH3 to CH8 output PWM signal (at the same time)

Package Including:
1x R8EF Receiver

The Futaba R3004SB is a slim 4-channel receiver that is ideally suited to smaller models, as well as gliders/electric gliders that still require full range transmission. Futaba ditched bulky moulded cases and opted for lightweight heat shrink instead, this provides protection for almost any use but helps keep the weight down to just under 5 grams. The electronics are uncompromised, so the R3004SB has full telemetry features and full range transmission. It's slim and compact format makes it ideal for almost any application, whilst a pair of coaxial aerials provide solid stable reception with their length allowing them to be positioned at 90 degrees from each other, to give the maximum possible range.

2.4GHz T-FHSS Air system
4 Channels + S-BUS
S-BUS2 Port for telemetry
Diversity Dual Antenna
Ultra small design for smaller models
Heat shrink enclosure to reduce weight

Specification:
Modulation: T-FHSS Air
Weight: 4.8g
Voltage: 4.8 - 7.4V
Channels: 4ch + S.Bus2 Port
Dimensions: 18x41.4x9.9mm
Frequency: 2.4GHz
Aerial Length: 2x 150mm

OS Engine Connecting Rod 91SX-H C Spec/105HZ

Spare Part for O.S. Engine OS MAX
OS29505010

OS Engine "O" Ring (4BK/60J/20J/60P/40J) 2 pcs.

Spare Parts for O.S. Engine OS MAX
OS24981837

Performance Propellers for Model Airplanes - GF Series

FB - factory balanced propeller
GF Series is specially designed for sport flying and high performance model R/C airplanes with electric motors or glow engines. Made of Glass Fiber Reinforced Composite for strength & durability.

Propeller diameter: 11"/279mm
Propeller pitch: 7"/178mm
Hub thickness: 14.3mm
Shaft diameter: 6.35mm - 7.94mm
Propeller Weight: 26.1g
Direction of rotation: Normal (Tractor)
Material: Glass Fiber R Composite
Color: Black

Hitec DPC-11 PC program interface for all Hitec programmable servos

Dongle for PC Programmer (servo programmer)

Graupner Micro Infrared Thermometer (pen shape).

Konect Maxi On/Off Switch with (XT60/JR/Graupner cable)

The Ming Yang Heavy Duty ON/OFF Switch Harness (JR/Graupner cable)

Flat Y-lead servo extension cable (150mm)

Flat Y-cable cable with JR connectors

Plastic spinner for two-blade propeller.

Front mount
Colour: white
Size: 38mm

Plastic spinner for radio controlled airplane models for two-blade propeller.

Front mount
Colour: black
Size: 38mm

Plastic spinner for radio controlled airplane models for three-blade propeller.

Front mount
Propeller: three-blade
Colour: black
Size: 50mm

Plastic spinner for radio controlled airplane models for three-blade propeller.

Front mount
Propeller: three-blade
Colour: black
Size: 70mm

Mosfet Power Multi Function Panel

Features:

• Adjustable glow plug current outlet
• Electric powered fuel pump 
• Switch selectable fuel direction for fueling/defueling
• Colour coded 12V starter outlets
• Dedicated glow plug igniter ports

Hobbywing LED Program Card (Skywalker, FlyFun)

Overview:
This program card is for programming HobbyWing brushless aircraft ESCs.

It works with the following HobbyWing products:
FlyFun series, SkyWalker series, Guard series (discontinued), and Sword series (discontinued) of brushless aircraft.
Note: this program card doesn’t work with Platinum series of brushless aircraft ESCs.

Specifications:
Size：88x58x14mm
Weight : 40g
Input Voltage : 4.8V—6.0V (a separate battery is needed for powering this program box when ESC has no BEC)

Kyosho Fazer FZ02 Upgrade Parts

HD TC Centre Shaft FAZER 2.0 (S)

Team EDS Clutch Spring Tool for Buggy

Team EDS Flywheel Wrench Tool

This tool helps you to glue the tyres on the rims without extra residue. Quick and easy assembly. Insert the tyres, close the lid ring and you're ready to glue.

Tool for 1:8 size buggies,..

TFL Racing Cross Hex Wrench - inner 2.5/5.0mm and outer 5.5/8.0mm

Tool for 1:8 and 1:10 cars, buggies, truggies, trucks,..

TFL Racing Cross Hex Wrench 4.0/5.5/7.0/8.0mm

Tool for 1:8 and 1:10 cars, buggies, truggies, trucks,..

SkyRC XT60 Charging Cable for 2S Lipo Battery (4mm and 5mm)

4 and 5mm gold connectors

SkyRC Dual Charging (Port) Balancer Board with XH adapter

Specification:
Cell: 2-8S LiPo
Connector: XT60 for battery / XH balance ports
Fuse: 2x 40A

TFL Racing Quick Change Hex Wrench Set 1.5/2.0/2.5/3.0mm

Tool for 1:8 and 1:10 cars, buggies, truggies, trucks,..

Specification:

Weight: 40g
Width: 43mm
Length: 360mm
Root: 5mm
Hole: 3mm

Specification:

Weight: 115g
Width: 54mm
Length: 550mm
Root: 12mm
Hole: 4mm