Iskanje

Hitec Heavy Duty Switch Harness

Graupner ON/OFF Switch with leads

Konect Maxi On/Off Switch with (XT60/JR/Graupner cable)

The Ming Yang Heavy Duty ON/OFF Switch Harness (JR/Graupner cable)

Kyosho Fazer FZ02 Upgrade Parts

HD TC Centre Shaft FAZER 2.0 (S)

Team EDS Clutch Spring Tool for Buggy

REDS Racing V3.0 Tetra Aluminum Clutch - 32mm (without bell)

Fully Adjustable
REDS new clutch system comes with 3 preload adjustments on the front plate to fit any type of ground and engine output. You can change the spring preload on the front plate from H to M and to L (High, Medium and Low position). The 1.1mm spring was introduced (available as an optional part) to further increase the number of setup combinations to best suit your driving style and track conditions.

The new clutch system features a new dust-proof flywheel which has been improved compared to its previous version to protect the engine front bearing from dirt even on high-dust conditions.

The new 7075 Aluminum and Carbon clutch shoes have been redesigned to increase wear resistance. In addition, the new shoes are lighter to allow and engage at higher revs and lower inertia to rotation. V3.0 Clutch System comes with 4 alu shoes and 1.0 mm springs. Other parts are available as an upgrade.

2 different models of the V3.0 Clutch has been developed and both are available with 32mm and 34mm diameter to make it suitable for different car models.

​ Aluminum Clutch: medium inertia, good on all type of track layouts.
Steel Clutch: high inertia, recommended for low grip tracks.

​ Suitable for any type of car (Off-Road Buggy and Truggy)
32 mm for Kyosho, JQ, Team Associated, Hot Bodies, Serpent, Xray.
34 mm for Sworkz, Mugen, Team Losi, Agama, Tekno.

The original REDS bell can be used with all types of cars named above.

Kyosho Fazer FZ02 Upgrade Parts

HD TC Centre Shaft FAZER 2.0 (L) - FZ02L

PROTOform Chevrolet Corvette ZR1 (clear body / 190mm TC)

It's the baddest 'Vette of them all: boasting 755 horsepower and a top speed of 212 mph, Corvette™ ZR1 is an American supercar without peer. PROTOform now brings the most extreme street car Chevrolet® has ever built to 1:10 scale with their release of the ZR1 body for 190mm touring cars.

Perfectly suited for USGT Class racing, the officially-licensed Corvette™ ZR1 body features all the exceptional details of its 1:1 counterpart including aggressive front splitter, uniquely-shaped high rear wing, and oversized front grilles. The extensive decal sheet lets you deck out your ZR1 with Corvette-branded windshield headers, "Jake" skull hood logo and USA flags. New lighter-weight material lowers the center of gravity of your USGT car, improving responsiveness.

The body includes an add-on rear wing with the USGT-sanctioned 10mm trim height, nylon wing struts, and mounting hardware. This body fits popular 190mm touring cars and is formed from high-quality polycarbonate with paint-then-peel overspray film.

Chevrolet® Corvette™ ZR1 trademarks used under license to Pro-Line.
Please note: All bodies are sold in crystal clear polycarbonate and are painted for advertising purposes only.

Features:
Incredible scale details
Lighter weight material than C7.R
Officially-licensed by General Motors
USGT Approved
Made in the USA

Included:
Chevy® Corvette™ ZR1 Clear Body
Injection molded wing struts (2 pcs)
Extensive Decal sheet
Wing mounting hardware (4 pcs)
Paint-then-peel over spray film & window masks

Fits:
190mm TC (Radio Controlled Touring Cars)

Specs:
Length: 444.5mm
Width: 194mm
Height: 102mm
Wheelbase: 256mm

PowerBox DigiSwitch V2

The PowerBox DigiSwitch V2 is the second generation of the PowerBox Digi-Switch, which is well known throughout the world. For almost fifteen years the PowerBox DigiSwitch has represented the standard for small to medium-sized models thanks to its compact format and versatility.

Features
High-performance electronic switch
Ultra-light unit, compact format
Regulated output voltage
User-selectable output voltage: 6.0 V/7.0 V/7.6 V or non regulated
RGB LED voltage indicator for the battery
Telemetry support for CORE systems
Supports 4 different battery types: 2s LiPo, 2s LiIon, 2s LiFePo and 5s NiMH
Regulator monitoring
Suppression of servo feedback currents

Technical Data
Operating voltage: 4.0V - 9.0V
Power supply: 2s LiPo, 2s LiIon, 2s LiFePo, 5s NiMH
Current drain Power-on state: 23 mA
Current drain Standby: 4 μA
Maximum load current: max. 10 A
Drop-out voltage: 0.1 V
Output voltage: 6.0 V/ 7.0 V/7.6 V stabilized or non-regulated
Dimensions: 50 x 18 x 11 mm
Weight: 15 g
Temperature range: -30 °C to +75 °C


Use for large aerobatic or scale (RC) radio controlled airplanes and other models.