British English Iskanje
Iskalni niz
Izdelki, ki izpolnjujejo kriterije iskanja
6S 5000MAH 50C ULTRA LIPO (OPR50006S-50)
- 5000mah 6S pack rated at 50C continuous, with a burst of 100C
- 10AWG Silicon wires and JST-XH balance connector
- 160mm x 43mm x 44mm
- Weight 726.4g +/-5g
6S 1600mAh 30C Lipo (OPR16006S)
- 1600mah 6S pack rated at 30C continuous, with a burst of 80C
- 12AWG Silicon wires and JST-XH balance connector
- 108mm x 33mm x 34mm
- Weight 273g +/-
6S 2700mAh 30 / 80C Lipo (OPR27006S)
- 2700mah 6S pack rated at 30C continuous, with a burst of 80C
- 12AWG Silicon wires and JST-XH balance connector
- 108mm x 37mm x 40mm
- Weight 407g +/-5g
6S 5000mAh 30C Lipo (OPR50006S)
- 5000mah 6S pack rated at 30C continuous, with a burst of 80C
- 12AWG Silicon wires and JST-XH balance connector
- 160mm x 44mm x 43mm
- Weight 713g +/-5g
3S 2150MAH 50C ULTRA LIPO (OPR21503S50)
- 2150mah 3S pack rated at 50C continuous, with a burst of 100C
- 12AWG Silicon wires plus XT60 and JST-XH balance connector
- 106mm x 34mm x 23mm
- Weight 187g +/-5g
12S 4000MAH 50C ULTRA LIPO (OPR400012S50)
- 4000mah 12S pack rated at 50C continuous, with a burst of 100C
- 10AWG Silicon wires and JST-XH balance connector
- 280mm x 46mm x 50mm
- Weight 1350 +/-5g
1:8 Buggy Tyres on EVO rims I-BEAM MEDIUM LW (2 pieces) (AKA14001ZRW)
AKA 1:8 Buggy Tyres on EVO white rims
MEDIUM LW
HIGH QUALITY RACING TYRES FOR DEMANDING DRIVER
• Durability about 3 times better than regular compound
• 3 types of LW compound for any kind of track conditions
• Pre glued on white Evo rims with Aka exclusive red inserts
Optional LED Buffer Pack Indication System (OPRLED-K)
Optional LED device, these can be daisy chained for greater number and visibility if needed
Fits ULTRA-Guard 430
Optional LED device, these can be daisy chained for greater number and visibility if needed
Fits ULTRA-Guard 430
BEC Guard (OPRBG001)
- BEC Guard eliminates back EMF
- BEC Guard smooths the voltage output, eliminating voltage fluctuations which can reduce “brown outs” caused by momentary low BEC voltages
- Eliminates voltage spikes to receiver in excess of 10V
- Can eliminate over voltage up to 100V, thereafter shuts down protecting the radio equipment from over voltage.
- If used in conjunction with ULTRA GUARD, in the event of the over voltage hitting 100V and the subsequent shutdown the ULTRA GUARD would then take over and supply the backup power for safe retrieval of the model.
470L Tail Pitch Assembly (H47T016XXT)
Content
• 1x Metal Bearing mount
• 2x Bearing MR74ZZ (4x7x2.5mm)
• 1x Bearing mount washer (4x5.1x1.6mm)
• 1x Slide shaft (2x3x8.4mm)
• 1x Metal T type arm
• 2x Collar screw (M2x6mm)
• 2x Control link (1.5x2.3x1.4mm)
• 4x Collar B (2x3x2.5mm)
• 2x Collar screw (M2x6.5mm)
• Use for T-REX 300X / 470L
Content
• 1x Metal Bearing mount
• 2x Bearing MR74ZZ (4x7x2.5mm)
• 1x Bearing mount washer (4x5.1x1.6mm)
• 1x Slide shaft (2x3x8.4mm)
• 1x Metal T type arm
• 2x Collar screw (M2x6mm)
• 2x Control link (1.5x2.3x1.4mm)
• 4x Collar B (2x3x2.5mm)
• 2x Collar screw (M2x6.5mm)
2S 3300mAh "SHORTY" Race Lipo baterija (OPR33002S100B)
- 3300mah 2S pack rated at 100C
- 1.5mm thick ABS case with Ultrasonic welding to all seams
- 1-2C recommended charge rate for maximum cycle life
- 3C Max charge rate, no performance gain past this point
- 4mm bullet connector
- Weight 147 +/-5g
2S 4000mAh "SHORTY" Race Lipo baterija (OPR 4000-B)
- 4000mah 2S pack rated at 60C
- 1.5mm thick ABS case with Ultrasonic welding to all seams
- 1C recommended charge rate for maximum cycle life
- 2C Max charge rate, no performance gain past this point
- 4mm bullet connector
- Weight 200 +/-5g
2S 5800mAh Race Lipo baterija (OPR58002S100B)
- 5800mah 2S pack rated at 100C
- 1.5mm thick ABS case with Ultrasonic welding to all seams
- 1-2C recommended charge rate for maximum cycle life
- 3C Max charge rate, no performance gain past this point
- 5mm bullet connector
- Weight 280 +/-5g
2S 7000mAh Race Lipo baterija (OPR 70002S-50B)
- 7000mah 2S pack rated at 100C
- 1.5mm thick ABS case with Ultrasonic welding to all seams
- 1C recommended charge rate for maximum cycle life
- 2C Max charge rate, no performance gain past this point
- 4mm bullet connector
- Weight 320 +/-5g
Servo KST X15-755X HV 10.2kg/cm (8.4V) 760us (KST-0302)
KST X15-755X HV Digital Coreless Servo Motor (metal gear)
The KST X15-755X HV Brushless servo offers a significantly longer life-span, with a superior power to weight ratio. The servo features a nicely machined aluminium case and offerers high voltage capability. It can be run directly from a 2S LiPo battery without the need for a separate voltage regulator.
Another great benefit of X15 servos is the all new design of a circuit board that generates no counter EMF in any working conditions. It eliminates any possible interference with your flybarless system or receiver unit thus as a result giving you only the best in-flight performance.
Due to the extreme reliability and performance this servos are used in film and motion picture industry as well as in robotics, drones, UAV, UAS, academic researches, and other highly demanding applications such as use in various military projects,..
Technical Details:
Voltage (max.) [V]: 8.4
Torque [kg/cm]@6.0V: 7.2
Torque [kg/cm]@7.4V: 9.0
Torque [kg/cm]@8.4V: 10.2
Speed [s/60°]@6.0V: 0.06
Speed [s/60°]@7.4V: 0.05
Speed [s/60°]@8.4V: 0.04
Width [mm]: 15.0
Length [mm]: 35.5
Height [mm]: 32.5
Weight [g]: 40.0
Motor typ: Coreless
Working Frequency: 760us/560Hz, 450us-1050us
Resolution: <2us
Gear: Hardened Steel
Ball Bearing: 2BB
Output shaft type: 25T
Servo size: Mini
Waterproof: No
Manufacturer: KST
Suitable for use as s Tail Servo on 320-580 size RC Helicopters;
Such as Goblin 380 420, 500, KRAKEN 580, T-REX 450PRO DFC, 450L, 470, 500, Mikado LOGO 480, 500, OXY 5, and similar,..
Hobbywing Multifunction LCD Program Box (Xerun, Ezrun and Platinum) (HW30502000)
This multifunction LCD program box is applicable for the following HobbyWing products:
Platinum series of brushless aircraft ESCs, XeRun series &EzRun series of brushless car ESCs, Seaking Pro series of brushless boat ESCs
Specifications
Size：91x51x17mm（LxWxH）
Weight：65g
Input Voltage: 4.5V—12.6V (a separate battery is needed for powering this program box when ESC has no built-in/external BEC)
Interface: Micro USB， ESC interface (Futaba plug), Power supply interface (Futaba plug)
Overview
This multifunction program box is for programming HobbyWing brushless ESCs. Its friendly LCD interface makes ESC programming easy and quick. With a PC, you can upgrade ESC firmware and further adjust ESC parameters online. Besides, it’s compact, portable and very applicable for field use.
This multifunction program box is for programming HobbyWing brushless ESCs. Its friendly LCD interface makes ESC programming easy and quick. With a PC, you can upgrade ESC firmware and further adjust ESC parameters online. Besides, it’s compact, portable and very applicable for field use.
This multifunction LCD program box is applicable for the following HobbyWing products:
Platinum series of brushless aircraft ESCs, XeRun series &EzRun series of brushless car ESCs, Seaking Pro series of brushless boat ESCs
Specifications
Size：91x51x17mm（LxWxH）
Weight：65g
Input Voltage: 4.5V—12.6V (a separate battery is needed for powering this program box when ESC has no built-in/external BEC)
Interface: Micro USB， ESC interface (Futaba plug), Power supply interface (Futaba plug)
AKA 1:8 Buggy Tyres I-Beam (Supersoft - Long Wear/1 pc.) (AKA14001QX/T)
AKA 1:8 Buggy Tyres I-Beam (Supersoft - Long Wear)
Package: 1 piece
High quality competition grade offroad tyres. Use for radio controlled (RC) 1/8 buggies / car models
Package: 1 piece
High quality competition grade offroad tyres. Use for radio controlled (RC) 1/8 buggies / car models
Align 450DFC Main Shaft (H45166)
Content:
2x 450DFC Main rotor grip arm integrated control link
2x 450DFC Main rotor grip linkage bearing sleeve
4x 681ZZ-d2 Bearing
2x 450DFC Linkage rod A
2x Ball link
for T-REX 450 DFC
Features:
• Material: 6061-T6 Aluminum alloy material and CNC processed
• Weight: 3.24g
• Material: 6061-T6 Aluminum alloy material and CNC processed
• Weight: 3.24g
Content:
2x 450DFC Main rotor grip arm integrated control link
2x 450DFC Main rotor grip linkage bearing sleeve
4x 681ZZ-d2 Bearing
2x 450DFC Linkage rod A
2x Ball link
Blade Inductrix BNF Drone with SAFE Technology (BLH8780)
SAFE® technology makes drone flying easy
Quiet EDF power system
Durable rotor housings prevent damage
Brilliant LED orientation lights
Includes both red and blue bodies
150mAh 1S 3.7V 25C Li-Po flight battery
USB Li-Po charger
6–8 minute flying time
Blade® MLP transmitter with genuine Spektrum™ DSMX® 2.4GHz technology (included)
Needed To Complete
(Spektrum) DSMX Transmitter. Battery and Battery charger are included in the box!
A Fantastic Little Drone
The time has come for Electric Ducted Fans (EDF) to replace the old propeller thrust systems. By design, the cylindrical rotor housings add significant durability and produce less noise when carefully tuned. The Blade® Inductrix™ ultra micro drone is part jet and part quadcopter, with the kind of innovative flight technology that gives a machine you can fly just about anywhere, the performance edge that makes your flight experience more fun.
The Blade® Inductrix™ drone is an ultra micro machine that can be flown just about anywhere. Four specially tuned EDF rotor systems give this modern quad the appeal of a jet. As a result, performance feels incredibly smooth with far less noise than a conventional propeller rotor system. Durable rotor housings inherently prevent damage whether it’s bumped into walls or falls into the grass. Brilliant LED orientation lights and a sleek body design help keep you going in the right direction. Innovative SAFE® technology with self-leveling makes staying in control easy, even if it’s your first flight.
SAFE® Technology
With the Blade® Inductrix™ quadcopter, anyone can fly with little effort. Exclusive Horizon Hobby SAFE® technology combines small pitch and roll angle limits with electronic self-leveling to help you stay in control and have more fun.
Quiet Ducted Fans
Four carefully-tuned electric ducted fans give the Inductrix™ drone smooth performance that produces far less noise compared to normal quads that use propellers for thrust. The stealthy result is a machine that’s less intimidating with the appeal of a jet aircraft.
Durable
Each cylindrical rotor housing that ducts air through the high-speed rotors provides an inherently durable structure. You can bump the Inductrix drone into practically anything with little risk.
Visibility
Brilliant LED lights are located to provide instant orientation reference. The clear rotor housings keep your view unobstructed and add an unmistakable glow to the airframe.
Li-Po flight battery
The E-flite® 150mAh 1S 3.7V 25C Li-Po flight battery, included, can provide up to 5-minutes of flight and can be conveniently recharged with the included USB charger.
Spektrum™ Technology
With a single Spektrum DSM2®/DSMX® aircraft transmitter, you hold the key to a fleet of Bind-N-Fly® aircraft that includes everything from tiny Blade® helicopters and quadcopters to giant-scale E-flite® airplanes.
Includes
Fully assembled Blade® Inductrix™ drone
E-flite® 150mAh 1S 3.7V 25C Li-Po battery
USB 1S Li-Po charger
Key Features
Lightweight, fully assembled quadcopterSAFE® technology makes drone flying easy
Quiet EDF power system
Durable rotor housings prevent damage
Brilliant LED orientation lights
Includes both red and blue bodies
150mAh 1S 3.7V 25C Li-Po flight battery
USB Li-Po charger
6–8 minute flying time
Blade® MLP transmitter with genuine Spektrum™ DSMX® 2.4GHz technology (included)
Needed To Complete
(Spektrum) DSMX Transmitter. Battery and Battery charger are included in the box!
A Fantastic Little Drone
The time has come for Electric Ducted Fans (EDF) to replace the old propeller thrust systems. By design, the cylindrical rotor housings add significant durability and produce less noise when carefully tuned. The Blade® Inductrix™ ultra micro drone is part jet and part quadcopter, with the kind of innovative flight technology that gives a machine you can fly just about anywhere, the performance edge that makes your flight experience more fun.
The Blade® Inductrix™ drone is an ultra micro machine that can be flown just about anywhere. Four specially tuned EDF rotor systems give this modern quad the appeal of a jet. As a result, performance feels incredibly smooth with far less noise than a conventional propeller rotor system. Durable rotor housings inherently prevent damage whether it’s bumped into walls or falls into the grass. Brilliant LED orientation lights and a sleek body design help keep you going in the right direction. Innovative SAFE® technology with self-leveling makes staying in control easy, even if it’s your first flight.
SAFE® Technology
With the Blade® Inductrix™ quadcopter, anyone can fly with little effort. Exclusive Horizon Hobby SAFE® technology combines small pitch and roll angle limits with electronic self-leveling to help you stay in control and have more fun.
Quiet Ducted Fans
Four carefully-tuned electric ducted fans give the Inductrix™ drone smooth performance that produces far less noise compared to normal quads that use propellers for thrust. The stealthy result is a machine that’s less intimidating with the appeal of a jet aircraft.
Durable
Each cylindrical rotor housing that ducts air through the high-speed rotors provides an inherently durable structure. You can bump the Inductrix drone into practically anything with little risk.
Visibility
Brilliant LED lights are located to provide instant orientation reference. The clear rotor housings keep your view unobstructed and add an unmistakable glow to the airframe.
Li-Po flight battery
The E-flite® 150mAh 1S 3.7V 25C Li-Po flight battery, included, can provide up to 5-minutes of flight and can be conveniently recharged with the included USB charger.
Spektrum™ Technology
With a single Spektrum DSM2®/DSMX® aircraft transmitter, you hold the key to a fleet of Bind-N-Fly® aircraft that includes everything from tiny Blade® helicopters and quadcopters to giant-scale E-flite® airplanes.
Includes
Fully assembled Blade® Inductrix™ drone
E-flite® 150mAh 1S 3.7V 25C Li-Po battery
USB 1S Li-Po charger
Spektrum Telemetry Aircraft RPM Sensor and Bracket (SPMA9569)
Key Features
RPM sensor for backplate installation on 40- to 90-sized glow engines
Bolt-on installation with nothing else to install, picks up the rotation of the crankshaft through the backplate
Compatible with Spektrum™ telemetry modules
Has a micro JST connector and plugs into the TM1000 telemetry module
TM1000 AND/OR a Telemetry Capable Transmitter required
RPM sensor for backplate installation on 40- to 90-sized glow engines
Bolt-on installation with nothing else to install, picks up the rotation of the crankshaft through the backplate
Compatible with Spektrum™ telemetry modules
Has a micro JST connector and plugs into the TM1000 telemetry module
TM1000 AND/OR a Telemetry Capable Transmitter required
Gens ace Battery NiMh 1.2V SC 2700mAh (GE2-2700)
- Gens ace Battery NiMh 1.2V-SC2700mAh
- Loose cell
- 43x21mm
- 48g
AKA 1:8 Buggy Evo Wheels - Yellow (4 pcs.) (AKA24003Y)
AKA 1:8 Buggy Evo Wheels - Yellow (4 pieces)
Gens ace Battery LiPo 2S HV 7.6V 5800mAh 130C REDLINE (5mm) 225g (GE4RL-5800H-2T5)
- Gens ace Battery LiPo 2S HV 7.6V 5800mAh 130C
- 5mm connectors
- 139x47x18.5mm
- 225g
Gens Ace Redline Series 2S 130C 5800mAh Hardcase HV Ultra LCG LiPo Battery Pack. Consumers trust the Gens Ace name to deliver the dependability and high performance they expect. The Gens Ace 130C 2S 5800mAh 7.6V LiPo battery pack has a high-capacity, high-discharge rate that gives you the power and run-time you expect.
Features:
- Stable automatic stacking technology enables single cell capacities of 5800mAh.
- The most strict single cell capacity, voltage, resistance, discharge curve matching process.
- Superior Japan and Korea Lithium Polymer raw materials.
- Standard 5.0mm bullet
Specifications:
- Capacity: 5800mAh
- Voltage: 7.6V / 2S1P
- Discharge Rate: 130C
- Weight: 222g
- Size: 139mm x 47mm x 18.5mm (L x W x H)
- Connector Type: 5.0mm bullet
Features:
- Stable automatic stacking technology enables single cell capacities of 5800mAh.
- The most strict single cell capacity, voltage, resistance, discharge curve matching process.
- Superior Japan and Korea Lithium Polymer raw materials.
- Standard 5.0mm bullet
Specifications:
- Capacity: 5800mAh
- Voltage: 7.6V / 2S1P
- Discharge Rate: 130C
- Weight: 222g
- Size: 139mm x 47mm x 18.5mm (L x W x H)
- Connector Type: 5.0mm bullet
Power HD DSM44 Digital Servo 1.6kg/cm 6V (HD-DSM44)
The Power HD DSM44 digital servo is a micro servo with digital control electronics and metal gears. Servo horns and associated hardware are included.
Specs:
Torque(4.8V): 1.2 kg/cm
Torque(6.0V): 1.6 kg/cm
Speed: 0.09 sec (4.8V) / 0.07 sec (6.0V)
Operating Voltage: 4.8 ~ 6.0 DC Volts
Weight: 5.9g
Gear Type: Metal
Controller: Digital
Operating Temperature: -10℃~50℃
Size: 22x8.7x27mm
Spline: 25
Specs:
Torque(4.8V): 1.2 kg/cm
Torque(6.0V): 1.6 kg/cm
Speed: 0.09 sec (4.8V) / 0.07 sec (6.0V)
Operating Voltage: 4.8 ~ 6.0 DC Volts
Weight: 5.9g
Gear Type: Metal
Controller: Digital
Operating Temperature: -10℃~50℃
Size: 22x8.7x27mm
Spline: 25
Hitec HS-311 Analog Servo 3.5kg/cm 6V (1HI3063)
Specifications:
Operating Voltage Range: 4.8V-6.0V
Speed: 0.19-0.15s (@ 60°)
Maximum Torque Range: 3.0-3.5kg/cm
Current Draw at Idle 7.7 mA
No Load Operating Current Draw 180 mA
Stall Current Draw 800 mA
Dead Band Width 5 µs
Physical Specifications:
Dimensions: 40.0 x 20.0 x 36.5mm
Weight: 43.0g
Motor Type: 3 Pole Metal Brush Ferrite
Gear Material: Nylon
Bearing Type: None
Output Shaft: 24t
Case Material: Plastic
The HS-311 sport servo provides the novice modeler all the performance and reliability you would expect to find in a more expensive servos. Combined with precise resin gears and SMT circuitry, the HS-311 represents a remarkable value in today's R/C market.
Features:
Reliable three-pole ferrite motor
Durable nylon gears
Top resin bushing
Long life potentiometer
Features:
Reliable three-pole ferrite motor
Durable nylon gears
Top resin bushing
Long life potentiometer
Specifications:
Operating Voltage Range: 4.8V-6.0V
Speed: 0.19-0.15s (@ 60°)
Maximum Torque Range: 3.0-3.5kg/cm
Current Draw at Idle 7.7 mA
No Load Operating Current Draw 180 mA
Stall Current Draw 800 mA
Dead Band Width 5 µs
Physical Specifications:
Dimensions: 40.0 x 20.0 x 36.5mm
Weight: 43.0g
Motor Type: 3 Pole Metal Brush Ferrite
Gear Material: Nylon
Bearing Type: None
Output Shaft: 24t
Case Material: Plastic
AKA 1:8 Buggy Tyres Shaped Inserts - Soft (4 pcs.) (AKA34001S)
AKA 1:8 Buggy Tyres Shaped Inserts - Soft (4 pieces)
MST Silver Gray 5H Wheel Set with AD Onroad Tires (4 pieces) (MST103021SG)
MST Silver Gray 5H Wheel with AD Onroad Tires
- 4 pieces
Racing Experience Fuel Bottle 350ml (B7010S)
Racing Experience Fuel Bottle
Size: 350ml
Size: 350ml
Kyosho Body Retaining Pins (Small, 10 pieces) (K.92638)
Kyosho Body Retaining Pins for Onroad and Offroad (1/8 and 1/10)
Size: small
Lenght: 21mm
Thickness: 1.15mm
10 pieces
Size: small
Lenght: 21mm
Thickness: 1.15mm
10 pieces
TFL Lock Nut Driver Set 4.0/5.5/7.0/8.0mm (Black) (TT1604-08BK)
TFL High quality Lock Nut Driver Set 4.0/5.5/7.0/8.0mm (Black)