British English Iskanje
Iskalni niz
Izdelki, ki izpolnjujejo kriterije iskanja
6S 2700mAh 30 / 80C Lipo (OPR27006S)
- 2700mah 6S pack rated at 30C continuous, with a burst of 80C
- 12AWG Silicon wires and JST-XH balance connector
- 108mm x 37mm x 40mm
- Weight 407g +/-5g
470L Tail Pitch Assembly (H47T016XXT)
Content
• 1x Metal Bearing mount
• 2x Bearing MR74ZZ (4x7x2.5mm)
• 1x Bearing mount washer (4x5.1x1.6mm)
• 1x Slide shaft (2x3x8.4mm)
• 1x Metal T type arm
• 2x Collar screw (M2x6mm)
• 2x Control link (1.5x2.3x1.4mm)
• 4x Collar B (2x3x2.5mm)
• 2x Collar screw (M2x6.5mm)
• Use for T-REX 300X / 470L
Content
• 1x Metal Bearing mount
• 2x Bearing MR74ZZ (4x7x2.5mm)
• 1x Bearing mount washer (4x5.1x1.6mm)
• 1x Slide shaft (2x3x8.4mm)
• 1x Metal T type arm
• 2x Collar screw (M2x6mm)
• 2x Control link (1.5x2.3x1.4mm)
• 4x Collar B (2x3x2.5mm)
• 2x Collar screw (M2x6.5mm)
470L Tail Rotor Holder (H47T006XXT)
• Use for T-REX 300X / 450 / 470L
• When using with 450 use Tail Pitch Assembly (HS1304B)
• When using with 470L use Tail Pitch Control Link (H47T022XXT)
• When using with 470L use Tail Pitch Control Link (H47T022XXT)
Content
• 1x 470 Metal Tail Rotor Holder
• 1x Screw
• 2x MR74ZZ-d35 C2 Bearing (3.5x7x2.5mm)
• 2x MR63ZZ C2 Bearing (3x6x2.5mm)
• 2x Thrust Bearing F3-6M (3x6x2.8mm)
• 2x Washer (3x4.8x0.3mm)
• 2x Washer (2x4.8x0.6mm)
• 2x Socket Collar Screw (M2x6mm)
• 2x Screw (M2x6.5mm)
• 2x Socket collar screw (M2x9mm)
• 1x 470 Metal Tail Rotor Holder
• 1x Screw
• 2x MR74ZZ-d35 C2 Bearing (3.5x7x2.5mm)
• 2x MR63ZZ C2 Bearing (3x6x2.5mm)
• 2x Thrust Bearing F3-6M (3x6x2.8mm)
• 2x Washer (3x4.8x0.3mm)
• 2x Washer (2x4.8x0.6mm)
• 2x Socket Collar Screw (M2x6mm)
• 2x Screw (M2x6.5mm)
• 2x Socket collar screw (M2x9mm)
2S 7000mAh Race Lipo baterija (OPR 70002S-50B)
- 7000mah 2S pack rated at 100C
- 1.5mm thick ABS case with Ultrasonic welding to all seams
- 1C recommended charge rate for maximum cycle life
- 2C Max charge rate, no performance gain past this point
- 4mm bullet connector
- Weight 320 +/-5g
Servo KST X15-755X HV 10.2kg/cm (8.4V) 760us (KST-0302)
KST X15-755X HV Digital Coreless Servo Motor (metal gear)
The KST X15-755X HV Brushless servo offers a significantly longer life-span, with a superior power to weight ratio. The servo features a nicely machined aluminium case and offerers high voltage capability. It can be run directly from a 2S LiPo battery without the need for a separate voltage regulator.
Another great benefit of X15 servos is the all new design of a circuit board that generates no counter EMF in any working conditions. It eliminates any possible interference with your flybarless system or receiver unit thus as a result giving you only the best in-flight performance.
Due to the extreme reliability and performance this servos are used in film and motion picture industry as well as in robotics, drones, UAV, UAS, academic researches, and other highly demanding applications such as use in various military projects,..
Technical Details:
Voltage (max.) [V]: 8.4
Torque [kg/cm]@6.0V: 7.2
Torque [kg/cm]@7.4V: 9.0
Torque [kg/cm]@8.4V: 10.2
Speed [s/60°]@6.0V: 0.06
Speed [s/60°]@7.4V: 0.05
Speed [s/60°]@8.4V: 0.04
Width [mm]: 15.0
Length [mm]: 35.5
Height [mm]: 32.5
Weight [g]: 40.0
Motor typ: Coreless
Working Frequency: 760us/560Hz, 450us-1050us
Resolution: <2us
Gear: Hardened Steel
Ball Bearing: 2BB
Output shaft type: 25T
Servo size: Mini
Waterproof: No
Manufacturer: KST
Suitable for use as s Tail Servo on 320-580 size RC Helicopters;
Such as Goblin 380 420, 500, KRAKEN 580, T-REX 450PRO DFC, 450L, 470, 500, Mikado LOGO 480, 500, OXY 5, and similar,..
Gens ace Battery NiMh 1.2V SC 2700mAh (GE2-2700)
- Gens ace Battery NiMh 1.2V-SC2700mAh
- Loose cell
- 43x21mm
- 48g
Gens ace Battery LiPo 2S HV 7.6V 5800mAh 130C REDLINE (5mm) 225g (GE4RL-5800H-2T5)
- Gens ace Battery LiPo 2S HV 7.6V 5800mAh 130C
- 5mm connectors
- 139x47x18.5mm
- 225g
Gens Ace Redline Series 2S 130C 5800mAh Hardcase HV Ultra LCG LiPo Battery Pack. Consumers trust the Gens Ace name to deliver the dependability and high performance they expect. The Gens Ace 130C 2S 5800mAh 7.6V LiPo battery pack has a high-capacity, high-discharge rate that gives you the power and run-time you expect.
Features:
- Stable automatic stacking technology enables single cell capacities of 5800mAh.
- The most strict single cell capacity, voltage, resistance, discharge curve matching process.
- Superior Japan and Korea Lithium Polymer raw materials.
- Standard 5.0mm bullet
Specifications:
- Capacity: 5800mAh
- Voltage: 7.6V / 2S1P
- Discharge Rate: 130C
- Weight: 222g
- Size: 139mm x 47mm x 18.5mm (L x W x H)
- Connector Type: 5.0mm bullet
Features:
- Stable automatic stacking technology enables single cell capacities of 5800mAh.
- The most strict single cell capacity, voltage, resistance, discharge curve matching process.
- Superior Japan and Korea Lithium Polymer raw materials.
- Standard 5.0mm bullet
Specifications:
- Capacity: 5800mAh
- Voltage: 7.6V / 2S1P
- Discharge Rate: 130C
- Weight: 222g
- Size: 139mm x 47mm x 18.5mm (L x W x H)
- Connector Type: 5.0mm bullet
GWS H Slowflyer Parkflyer Propeller 7x3.5" (3EL2045)
GWS H Propeller for Slow-Flyers, Park-Flyers and all other slow flying model airplanes with electric motor.
Dimension: 7x3.5" (178x89mm)
Dimension: 7x3.5" (178x89mm)
TFL Lock Nut Driver Set 4.0/5.5/7.0/8.0mm (Black) (TT1604-08BK)
TFL High quality Lock Nut Driver Set 4.0/5.5/7.0/8.0mm (Black)
One Team Moss rubber wheel (73mm light) (2MO2192)
One Team Moss rubber RC model airplane wheel
Diameter: 73mm (light)
Diameter: 73mm (light)
Compact Foam Wheel 45mm (1.75″) (7HY006-03304)
Lightweight wheel with compact tire foam. Absorbent foam does not deform with the weight of the model.
Diameter: 45mm
Diameter: 45mm
Compact Foam Wheel 57mm (2.25″) (7HY006-03306)
Lightweight wheel with compact tire foam. Absorbent foam does not deform with the weight of the model.
Diameter: 57mm
Diameter: 57mm
Compact Foam Wheel 70mm (2.75″) (7HY006-03308)
Lightweight wheel with compact tire foam. Absorbent foam does not deform with the weight of the model.
Diameter: 70mm
Diameter: 70mm
Compact Foam Wheel 76mm (3.00″) (7HY006-03309)
Lightweight wheel with compact tire foam. Absorbent foam does not deform with the weight of the model.
Diameter: 76mm
Diameter: 76mm
Compact Foam Wheel 95mm (3.75″) (7HY006-03312)
Lightweight wheel with compact tire foam. Absorbent foam does not deform with the weight of the model.
Diameter: 95mm
Diameter: 95mm
Kavan Fuel Tank 500 ml (17oz) (KAV0031A)
Kavan Fuel Tank 500ml (17oz) with glow stopper kit #KAV0033
Special manufacturing process eliminates the possibility of thin spots in the tank wall. It is durable enough even for pressurized fuel systems. A brass ring around the neck eliminates the "split neck" common in some tanks using an expansion stopper. The rectangular shape optimizes capacity and prevents fuel starvation associated to the tank rotating and cutting off the fuel supply. A nut behind the rear nylon disc eliminates the possibility of a stripped thread that could result in a fuel leak.
The heavy metal fuel pickup (clunk) ensures constant fuel flow during any maneuver. Six molded channels in the tank sides provide for easy routing of the throttle pushrod nad any other linkages. Includes pre-bent brass tubing for quick assembly.
Can be used with either glow fuel or gasoline fuels. For gasoline use/order Replacement Rubber Kit KAV0032
Special manufacturing process eliminates the possibility of thin spots in the tank wall. It is durable enough even for pressurized fuel systems. A brass ring around the neck eliminates the "split neck" common in some tanks using an expansion stopper. The rectangular shape optimizes capacity and prevents fuel starvation associated to the tank rotating and cutting off the fuel supply. A nut behind the rear nylon disc eliminates the possibility of a stripped thread that could result in a fuel leak.
The heavy metal fuel pickup (clunk) ensures constant fuel flow during any maneuver. Six molded channels in the tank sides provide for easy routing of the throttle pushrod nad any other linkages. Includes pre-bent brass tubing for quick assembly.
Can be used with either glow fuel or gasoline fuels. For gasoline use/order Replacement Rubber Kit KAV0032
Kavan Fuel Tank 700 ml (24oz) (KAV0031D)
Kavan Fuel Tank 700ml (24oz) with glow stopper kit #KAV0033
Special manufacturing process eliminates the possibility of thin spots in the tank wall. It is durable enough even for pressurized fuel systems. A brass ring around the neck eliminates the "split neck" common in some tanks using an expansion stopper. The rectangular shape optimizes capacity and prevents fuel starvation associated to the tank rotating and cutting off the fuel supply. A nut behind the rear nylon disc eliminates the possibility of a stripped thread that could result in a fuel leak.
The heavy metal fuel pickup (clunk) ensures constant fuel flow during any maneuver. Six molded channels in the tank sides provide for easy routing of the throttle pushrod nad any other linkages. Includes pre-bent brass tubing for quick assembly.
Can be used with either glow fuel or gasoline fuels. For gasoline use/order Replacement Rubber Kit KAV0032
Special manufacturing process eliminates the possibility of thin spots in the tank wall. It is durable enough even for pressurized fuel systems. A brass ring around the neck eliminates the "split neck" common in some tanks using an expansion stopper. The rectangular shape optimizes capacity and prevents fuel starvation associated to the tank rotating and cutting off the fuel supply. A nut behind the rear nylon disc eliminates the possibility of a stripped thread that could result in a fuel leak.
The heavy metal fuel pickup (clunk) ensures constant fuel flow during any maneuver. Six molded channels in the tank sides provide for easy routing of the throttle pushrod nad any other linkages. Includes pre-bent brass tubing for quick assembly.
Can be used with either glow fuel or gasoline fuels. For gasoline use/order Replacement Rubber Kit KAV0032
FOXY Wooden Propeller 17x8 (1VR1708)
FOXY Wooden Propellers
Dimension: 17x8
High-quality wooden propellers were constructed with the help of the latest software and are produced using the newest and most advanced CNC machines. Their profile and shape are optimized to ensure high efficiency throughout the range of operating speeds. The unique shaping of the leaf ends contributes to achieving lower noise and better airflow. Whether you mount them on a "glow" or "gasoline" engine your FOXY propeller is a great choice to "hold" your aerobatic radio controlled model in the air!
FOXY propellers are designed and manufactured in the Czech Republic.
Dimension: 17x8
High-quality wooden propellers were constructed with the help of the latest software and are produced using the newest and most advanced CNC machines. Their profile and shape are optimized to ensure high efficiency throughout the range of operating speeds. The unique shaping of the leaf ends contributes to achieving lower noise and better airflow. Whether you mount them on a "glow" or "gasoline" engine your FOXY propeller is a great choice to "hold" your aerobatic radio controlled model in the air!
FOXY propellers are designed and manufactured in the Czech Republic.
Master Airscrew GF Series - 7x6 Propeller (2MO2816)
Performance Propellers for Model Airplanes - GF Series
FB - factory balanced propeller
GF Series is specially designed for sport flying and high performance model R/C airplanes with electric motors or glow engines. Made of Glass Fiber Reinforced Composite for strength & durability.
Propeller diameter: 7"/178mm
Propeller pitch: 6"/152mm
Hub thickness: 7.9mm
Shaft diameter: 4.76mm - 6.35mm
Propeller Weight: 7.4g
Direction of rotation: Normal (Tractor)
Material: Glass Fiber R Composite
Color: Black
FB - factory balanced propeller
GF Series is specially designed for sport flying and high performance model R/C airplanes with electric motors or glow engines. Made of Glass Fiber Reinforced Composite for strength & durability.
Propeller diameter: 7"/178mm
Propeller pitch: 6"/152mm
Hub thickness: 7.9mm
Shaft diameter: 4.76mm - 6.35mm
Propeller Weight: 7.4g
Direction of rotation: Normal (Tractor)
Material: Glass Fiber R Composite
Color: Black
Kyosho Upper Suspension Arm - Inferno MP7.5 (K.IF123)
Kyosho Upper Suspension Arm
Spare parts for Inferno NEO 2.0/3.0
Spare parts for Inferno NEO 2.0/3.0
Align Feathering Shaft Wrench 470 (5mm) (HOT00006A)
Use as T-REX 470 Feathering Shaft Helicopter Tools and T-REX 470 / 700 / 760 counter thread main linkage rod
6061-T6 Aluminum alloy material and CNC processed
Content:
1x Feathering Shaft Wrench (12x115x9mm)
1x One-way Bearing HF0512 (5x10x12mm)
6061-T6 Aluminum alloy material and CNC processed
Content:
1x Feathering Shaft Wrench (12x115x9mm)
1x One-way Bearing HF0512 (5x10x12mm)
Silicone Cable Red 10mm2 (1m) (6BI3041)
Muldental Elektronik Highly flexible 10.00 mm2 silicone power cable with red electrical insulation.
Stranded wire from 1260 strands 0.1 mm
Outer diameter: 6.5 mm
Max voltage: 48 V
Continuous current load: 73A
Peak current (5min): 126A
Made in Germany
Stranded wire from 1260 strands 0.1 mm
Outer diameter: 6.5 mm
Max voltage: 48 V
Continuous current load: 73A
Peak current (5min): 126A
Made in Germany
Silicone Cable Black 10mm2 (1m) (6BI3041B)
Muldental Elektronik Highly flexible 10.00 mm2 silicone power cable with black electrical insulation.
Stranded wire from 1260 strands 0.1 mm
Outer diameter: 6.5 mm
Max voltage: 48 V
Continuous current load: 73A
Peak current (5min): 126A
Made in Germany
Stranded wire from 1260 strands 0.1 mm
Outer diameter: 6.5 mm
Max voltage: 48 V
Continuous current load: 73A
Peak current (5min): 126A
Made in Germany
Master Airscrew GF Series - 11x7 Propeller (2MO2866)
Performance Propellers for Model Airplanes - GF Series
FB - factory balanced propeller
GF Series is specially designed for sport flying and high performance model R/C airplanes with electric motors or glow engines. Made of Glass Fiber Reinforced Composite for strength & durability.
Propeller diameter: 11"/279mm
Propeller pitch: 7"/178mm
Hub thickness: 14.3mm
Shaft diameter: 6.35mm - 7.94mm
Propeller Weight: 26.1g
Direction of rotation: Normal (Tractor)
Material: Glass Fiber R Composite
Color: Black
FB - factory balanced propeller
GF Series is specially designed for sport flying and high performance model R/C airplanes with electric motors or glow engines. Made of Glass Fiber Reinforced Composite for strength & durability.
Propeller diameter: 11"/279mm
Propeller pitch: 7"/178mm
Hub thickness: 14.3mm
Shaft diameter: 6.35mm - 7.94mm
Propeller Weight: 26.1g
Direction of rotation: Normal (Tractor)
Material: Glass Fiber R Composite
Color: Black
Plastic Spinner 3-blade 70mm (black) (2RA10342)
Plastic spinner for radio controlled airplane models for three-blade propeller.
Front mount
Propeller: three-blade
Colour: black
Size: 70mm
Front mount
Propeller: three-blade
Colour: black
Size: 70mm
TFL Racing Cross Hex Wrench 4.0/5.5/7.0/8.0mm (TT1606-04)
TFL Racing Cross Hex Wrench 4.0/5.5/7.0/8.0mm
Tool for 1:8 and 1:10 cars, buggies, truggies, trucks,..
Tool for 1:8 and 1:10 cars, buggies, truggies, trucks,..
700 mm/12/5mm Rapid FBL - MS Composit CFC main blades (MS-R90700FBL)
Specification:
Weight: 190g
Width: 64mm
Length: 700mm
Root: 12mm
Hole: 5mm
Weight: 190g
Width: 64mm
Length: 700mm
Root: 12mm
Hole: 5mm
ALU Servo Arm 76.2mm / M3 / 25T (EFSA30FM3)
Extreme Flight aluminium servo arm 3"
Length: 76.2mm
Internal Thread: M3
Servo spline: 25T
Dual servo arm / control horn for use in radio controlled (RC) airplanes and and other models.
Length: 76.2mm
Internal Thread: M3
Servo spline: 25T
Dual servo arm / control horn for use in radio controlled (RC) airplanes and and other models.
ALU Servo Arm 31.7mm / M2 / 25T (EFSA12FM2)
Extreme Flight aluminium servo arm 1.25"
Length: 31.7mm
Internal Thread: M2
Servo spline: 25T
Servo arm / control horn for use in radio controlled (RC) airplanes and and other models.
Length: 31.7mm
Internal Thread: M2
Servo spline: 25T
Servo arm / control horn for use in radio controlled (RC) airplanes and and other models.
Nitro Starter Box 2x775 Motor - buggies / truggies (1/8 - 1/10 scale) (B7060)
Racing Experience Universal Starter Box
Features:
2 x 775 powerful 12V motors
Universal chasis design
Multiple power options
Durable quality construction
Onroad and Offroad
Dual Motor Power:
Two powerful motors provide ample power for starting even the largest displacement car engines and can be arranged in two different configurations to facilitate different engine orientations and CW and CCW rotation.
Multiple Power Options:
Starter Box can be powered using two 7.2V 6-cell Sub C (NiMh) stick packs, by 12V Pb battery or with 2x 7.4V LiPo packs.
Dimensions:
390 x 142 x 109 mm
Batteries are not included. Use for radio controlled (RC) onroad and offroad 1/10 and 1/8 car models.
Features:
2 x 775 powerful 12V motors
Universal chasis design
Multiple power options
Durable quality construction
Onroad and Offroad
Dual Motor Power:
Two powerful motors provide ample power for starting even the largest displacement car engines and can be arranged in two different configurations to facilitate different engine orientations and CW and CCW rotation.
Multiple Power Options:
Starter Box can be powered using two 7.2V 6-cell Sub C (NiMh) stick packs, by 12V Pb battery or with 2x 7.4V LiPo packs.
Dimensions:
390 x 142 x 109 mm
Batteries are not included. Use for radio controlled (RC) onroad and offroad 1/10 and 1/8 car models.