RAYTRONIC C30 Plus DC Balance Charger 300W

29.89€  Inc Tax
The Raytronic C30+ (300W) was designed in mind with high performance and very simple operation. Raytronic C30+ allow charging and discharging most common types of cells (NiCd, NiMh, LiPo, LiHV, Li-ion, LiFe, Pb), and is equipped with a built-in six-channel balancer, which ensures safe charging of lithium batteries. It offers also a measurement of voltage and internal resistance of individual cells (for lithium batteries).

Input supply voltage 10 - 26 V DC (socket XT60) For charging and discharging 1 - 16 NiCd / NiMH cells, 1 - 6 Li-ion / LiPo / LiHV / LiFe cells or 2- 20 V lead-acid batteries
Adjustable charging current (0.1 A - 12.0 A)
Adjustable discharge current (0.1 A - 3.0 A)
Max. power for charging 300 W, for discharging 5 W
Termination of charging using delta-peak automation for NiCd and NiMH batteries
Lithium and Pb batteries are charged using the "constant current / constant voltage" method
Adjustable delta-peak detection sensitivity for NiCd and NiMH batteries
Adjustable end voltage for charging and discharging for lithium batteries
Repeated cyclic operation of charging / discharging or discharging / charging for NiCd and NiMH batteries, up to 5 cycles
Four charging modes for lithium batteries - normal charging, fast charging, balancing charging and storage charging / discharging
Stop charging when the set time or the supplied charge is exceeded.
Memory for 5 charging / discharging programs.
Measurement of the total voltage of the set and individual cells (for lithium batteries)
Measurement of the total internal resistance of the set and individual cells (for lithium batteries)
The XT60 power output socket and the JST-XH 2-6S universal balancer socket allow you to connect the rechargeable battery directly without the need for a charging cable and balancer adapter (if the kit is equipped with an XT60 power connector and a JST-XH service connector) Two-line backlit LCD display with simple and clear menu and display of parameters during charging / discharging
A number of warning text messages contribute to safe operation - incorrect input voltage, incorrect connection, unsuitable battery or its condition, incorrect polarity at the output
Reverse polarity and short circuit protection at the output / li>
Compact plastic case, small dimensions
Built-in fan for forced cooling

Input voltage [V]: 10 - 26
Charging current [A]: 0.1 - 12
Discharge current [A]: 0.1 - 3
Number of channels: 1
NiCd: 1 - 16
NiMH: 1 - 16
Li-Pol: 1 - 6
Li-Ion: 1 - 6
Li-Fe: 1 - 6
Li-HV: 1 - 6
Pb: 1 - 10
Balancer: Yes
Charging power [W]: 300
Discharge power [W]: 5
Balancer current [A]: 1
Length [mm]: 87.5
Width [mm]: 48.5
Height [mm]: 30
Weight [g]: 95

  • Availability: In stock, available
  • Model: 3EC1030P
  • Manufacturer: RAY