Search

Search Criteria

 
 
 
 

Products meeting the search criteria

Sort By:  
Raytronic C50 DC Balance Charger - 500W / (2x250W) (3EC1050)
Small two-channel charger Raytronic C50 2×250W designed to offer a smart charging with high power and simple and intuitive operation.
Raytronic C50 allows to charge and discharge common types of batteries (NiCD, NiMH, LiPo, LiFe, LiHV, Li-Ion, Pb) and is also equipped with 6-channel balance port for safe charging of lithium batteries.
The charger has a coloured LCD display and programming button and dial.

Features

Program for new types of "High Voltage" lithium (LiHV) batteries with an output charging voltage up to 4.25V
Powerful balance with current up to 800mA
Optional synchronised operation of both channels for charging a single battery with power up to 500W
Optional recuperative discharging with high power when charging from a car battery (energy consumed by the charger is used to charge the car battery powering the charger again)
Adjustable output voltage for charging and discharging lithium batteries.
Programs for charging intelligent batteries for popular DJI drones.

Parameters overview

Input: 7.28V DC (XT60 connector)
For charging/discharging 1–16cell NiCd/NiMH, 1–6cell Li-Ion/LiPo/LiFe/LiHV or 2–20V Pb batteries
Adjustable charging current (0.1–15.0 A) for each channel
Adjustable discharging current (0.1–3.0 A), or recuperative discharging (0.1–15.0 A) for each channel
Charging power output up to 2x250W / 1x500W for synchronous charging
Discharging power output up to 2x12W, up to 2x250W for recuperative discharging
Charging finishing via automatic "Delta-Peak" for NiCd and NiMH batteries
Lithium and Pb batteries are charged via the "constant current/constant voltage" method
Adjustable sensitivity of "Delta-Peak" detection for NiCd/NiMH batteries
Adjustable output voltage for charging and discharging the lithium batteries
Repeated cyclic charging/discharging or discharging/charging operation for NiCd and NiMH batteries, up to 12 cycles
3 lithium battery modes - charging, discharging and charging/discharging for storing (all of this with a balance port or without it).
Finishing of charging after reaching a set time, temperature or supplied charge
Memory for 5 charging/discharging programs
Internal resistance measuring for individual cells
Stabilised DC current source (0.1–15.0 A) with an adjustable voltage limit
Charging programs for intelligent DJI Mavic/Phantom/Inspire batteries
Ports for temperature sensor (sold separately)
USB input (5V / 2.1A) for smartphone/tablets/other charging
Simple firmware update via USB port
Backlit coloured LCD display with simple and well-arranged menu, parameter overview during charging/discharging
Programming button and dial for simple and intuitive setting and controlling the charger
Warning messages for higher safety - incorrect input voltage, incorrect connection, unsuitable battery or its condition, incorrect polarity etc.,..
Incorrect polarity and on-input short-circuit protection
Forced-cooling fan
Compact plastic body with very small dimensions

Both channels are equipped with an output XT60 ports and universal ports for service connectors JST-XH, allowing direct connection of battery power cables and service connectors JST-XH for 2–6S packs. If you are using a pack with XT60 and JST-XH connects (no additional cables needed).

Note: charger uses output voltage of 2.4V/cell for Pb battery charging. It is suitable for charging typical lead-acid batteries (car batteries) and gel batteries with reversible valve.
NOT SUITABLE for charging gas-tight gel batteries charged with a maximum of 2.3V/cell.

Package contains:
Raytronic C50 Charger
USB Cable
Screen Protector
User Manual

69.54€  Inc Tax
Receiver Battery Box 4xAA Rx (4.8V) (8GR3094)
Receiver Battery Box for loose NiMh, NiCd cells

4xAA (4.8V)

For radio controlled cars, buggies and other models requiring 4AA (4.8V) power supply.

3.66€  Inc Tax
Bittydesign AGATA 1/10 GT (clear body / 190mm) (BDGT-190AGT)
AGATA, a new body shell for the 1/10 GT division

The AGATA project was born from the desire to offer to the RC enthusiast all over the world a body shell that could recall our origins, Emilia land of engines and dream car manufacturers.

Tested over several months on different carpets and asphalts, the body is a new alternative for drivers who not only aim for pure performance but also seek an aesthetic satisfaction fully satisfied by the unique shapes and lines of AGATA.

Product Features
The body shell meet the specifications needed to participate in any 1/10 GT race in the world, USGT class included.

Made with high quality and genuine polycarbonate Lexan®
Included in the kit a complete set of screw, nuts and large plastic washers to fix properly the rear wing
Front foam (laser cut) to avoid the vibration of the front nose of the body included into the kit
Produced in Light Weight version, thickness of material 0,75mm
Sold clear with protective film outside
Included in the package a decal sheet pre-cut and windows mask

Use this body for radio controlled (RC) onroad car models.

29.89€  Inc Tax
PROTOform Chevrolet Corvette ZR1 (clear body / 190mm TC) (PL1563-25)
PROTOform Chevrolet Corvette ZR1 (clear body / 190mm TC)

It's the baddest 'Vette of them all: boasting 755 horsepower and a top speed of 212 mph, Corvette™ ZR1 is an American supercar without peer. PROTOform now brings the most extreme street car Chevrolet® has ever built to 1:10 scale with their release of the ZR1 body for 190mm touring cars.

Perfectly suited for USGT Class racing, the officially-licensed Corvette™ ZR1 body features all the exceptional details of its 1:1 counterpart including aggressive front splitter, uniquely-shaped high rear wing, and oversized front grilles. The extensive decal sheet lets you deck out your ZR1 with Corvette-branded windshield headers, "Jake" skull hood logo and USA flags. New lighter-weight material lowers the center of gravity of your USGT car, improving responsiveness.

The body includes an add-on rear wing with the USGT-sanctioned 10mm trim height, nylon wing struts, and mounting hardware. This body fits popular 190mm touring cars and is formed from high-quality polycarbonate with paint-then-peel overspray film.

Chevrolet® Corvette™ ZR1 trademarks used under license to Pro-Line.
Please note: All bodies are sold in crystal clear polycarbonate and are painted for advertising purposes only.

Features:
Incredible scale details
Lighter weight material than C7.R
Officially-licensed by General Motors
USGT Approved
Made in the USA

Included:
Chevy® Corvette™ ZR1 Clear Body
Injection molded wing struts (2 pcs)
Extensive Decal sheet
Wing mounting hardware (4 pcs)
Paint-then-peel over spray film & window masks

Fits:
190mm TC (Radio Controlled Touring Cars)

Specs:
Length: 444.5mm
Width: 194mm
Height: 102mm
Wheelbase: 256mm

29.28€  Inc Tax
S10 Blast TC 2 Clubracer Non-RTR (no wheels and body) - 1/10 4WD Electric Touring Car (L120202)
S10 Blast TC 2 Clubracer Non-RTR no wheels and body - 1/10 4WD Electric Radio Controlled (RC) Touring Car

The perfect basis for TC racing!
The S10 Blast TC 2 Clubracer features a specially developed 4WD chassis concept that fulfils all demands on a 1/10 4WD touring car. From the suspension to the drive, everything has been precisely adapted. Depending on the track layout, the suspension geometry can be completely adjusted.

The S10 Blast TC 2 Clubracer is a basis model ready for competition. It comes as a pre-mounted chassis without body shell, electronics and tyres.

Features
Splash-proof receiver box
Easy to understand user manual including beginner and tuning guide
Blue anodized aluminum suspension arm holder front and rear
Blue anodized aluminum motor mount
Reinforced front suspension
Low maintenance and efficient universal drivetrain
Left/right turnbuckles in front and rear
Fully adjustable onroad race suspension for perfect handling performance
Steel differentials front and rear
Swaybars front and rear for improved cornering
4 "Big Bore" oil filled shocks for perfect roadability on every surface
CVD driveshafts front for constant power transmission and minimized losses
Completely built with ball bearings
Completely sealed drive train protects the gears against stones, dirt and dust
Completely mounted chassis
All spare parts available

Technical Data
Length 414mm
Width 190mm
Height 120mm
Wheelbase 262mm
Drive system 4WD shaft drive
Gearing 48dp
Diameter of wheel 65mm
Width of wheel 24mm

89.06€  Inc Tax
Kyosho Radio Controlled Touring Car FW-06 Acura NSX GT3 1:10 Nitro Readyset (K.33208B)
Kyosho Radio Controlled Touring Car FW-06 Acura NSX GT3 1:10 Nitro Readyset

Proven shaft-driven 4WD chassis with Syncro KT-231P 2.4GHz R/C system!
From beginner to race winner, this machine delivers smooth performance every time.

User-friendly with mild control response, the FW-06 is the perfect introduction to GP touring cars and the performance of this amazing machine seems to evolve as your driving technique improves. 2-speed automatic transmission combines with the high-power KE15-SP engine to make full use of the power band and maximize performance from KYOSHO's proven shaft-driven 4WD chassis. With the same rear suspension as the World Champion V-ONE RRR with setting options and maintenance-friendly features only available on the latest racing machines, the FW-06 chassis also meets the demands of expert-level drivers. All this performance is packed into a fully-assembled Readyset. Equipped with the 2.4GHz Syncro KT-231P transmitter, finding an open frequency is a problem of the past. In addition to the dual-rate function, the KT-231P also features a failsafe function that automatically reduces the throttle if radio signal is interrupted. Simply switch the power on and you can be on the track and clocking race-winning times straight away.

●Loaded with KE15-SP engine with slide carburetor fitted with slow idle adjustment and return spring.
●Reliable universal swing shafts included on front.
●Turnbuckle tie-rods used for steering rod and rear upper arms for fully adjustable alignment.
●KYOSHO's proven center-shaft drive 4WD provides light control response.
●Disk brakes deliver reliable and responsive braking control.
●Unique compact recoil starter without one-way clutch realizes lower resistance and starts the engine with a pull on the starter cord.
●Equipped with a total of 22 ball bearings for highly-efficient, full-bearing specification.
●Fitted with tuned muffler and large air cleaner.
●High-grip rubber tires with inner sponge supports are pre-glued onto wheels.
●Compatible with many FW-05 parts. *Not compatible with some parts.

. Technical Data:
■Length 372mm
■Width 200mm
■Height 100mm (approx.)
■Ground Clearance 5mm
■Wheelbase 258mm
■Tread (F/R) 176mm
■Tire(F/R) φ66×25mm
■Gear Ratio 7.47 / 5.44:1
■Weight 1,800g (approx.)
■Engine KE15SP with recoil starter

Kit contents:
●Fully-assembled chassis complete with pre-set control linkages
●Pre-mounted KE15SP engine with recoil starter
●Special manifold and muffler
●Finished pre-cut body complete with paint and stickers applied
●Syncro KT-231P+ transmitter

Required for operation:
●8 x AA-size alkaline batteries for R/C system
●Fuel
●Fuel bottle
●Plug heater

398.33€  Inc Tax
Kyosho Radio Controlled Touring Car FW-06 Corvette C6-R 4WD 1:10 Nitro Readyset (K.33202Z)
Kyosho Radio Controlled Touring Car FW-06 Corvette C6-R 4WD 1:10 Nitro Readyset

User-friendly with mild control response, the FW-06 is the perfect introduction to GP touring cars and the performance of this amazing machine seems to evolve as your driving technique improves. 2-speed automatic transmission combines with the high-power GXR15 engine to make full use of the power band and maximize performance from KYOSHO's proven shaft-driven 4WD chassis. With the same rear suspension as the World Champion V-ONE RRR with setting options and maintenance-friendly features only available on the latest racing machines, the FW-06 chassis also meets the demands of expert-level drivers. All this performance is packed into a fully-assembled Readyset. Equipped with the 2.4GHz Syncro KT-231P transmitter, finding an open frequency is a problem of the past. In addition to the dual-rate function, the KT-231P also features a failsafe function that automatically reduces the throttle if radio signal is interrupted. Simply switch the power on and you can be on the track and clocking race-winning times straight away.

●Loaded with GXR15 engine with slide carburetor fitted with slow idle adjustment and return spring.
●Reliable universal swing shafts included on front.
●Turnbuckle tie-rods used for steering rod and rear upper arms for fully adjustable alignment.
●KYOSHO's proven center-shaft drive 4WD provides light control response.
●Disk brakes deliver reliable and responsive braking control.
●Unique compact recoil starter without one-way clutch realizes lower resistance and starts the engine with a pull on the starter cord.
●Equipped with a total of 22 ball bearings for highly-efficient, full-bearing specification.
●Fitted with tuned muffler and large air cleaner.
●High-grip rubber tires with inner sponge supports are pre-glued onto wheels.
●Compatible with many FW-05 parts.

Technical data:
■Length 372mm
■Width 200mm
■Height 100mm (approx.)
■Ground Clearance 5mm
■Wheelbase 258mm
■Tread (F/R) 176mm
■Tire(F/R) bF64×24mm
■Gear Ratio 7.47 / 5.44:1
■Weight 1,800g (approx.)
■Engine GXR15 with recoil starter

Kit content:
●Fully-assembled chassis complete with pre-set control linkages
●Pre-mounted GXR15 engine with recoil starter
●Special manifold and muffler
●Finished pre-cut body complete with paint and stickers applied
●Syncro KT-231P transmitter

Required for operation:
●8 x AA-size alkaline batteries for R/C system
●Fuel
●Fuel bottle
●Plug heater

379.42€  Inc Tax
Serpent 411 Sport 1/10 4WD Kit (190mm) (SER400006)
Serpent 411 Sport 1/10 4WD Kit

Sport type, clublevel 1/10 scale 190mm electric powered touringcar. 4 wheel-belt-drive, RCM hydraulic shocks, front nylon spool, rear geardiff, independent suspension, black glass-fibre shocktowers, chassis and top-deck. Fully upgradable to race spec. No electronics, tyres/wheels, or body included.

Chassis
Supernarrow, symmetrical , durable black glass-fibre chassisplate with optimised flex design, countersunk holes, central section holes all perfectly in center, pockets for geardiff, spool and spur.

Topdeck
Durable black glass-fibre topdeck with optimised flex design.
Battery-mount brackets and Lipo-holders
Easy to use nylon batter tape holder, which allow the battery tape to run over instead of under the chassis. The holders can be reversed for other battery position. The Lipoholders will securely keep the Lipo in place, also at hard impact.

Servo-mount
The servo is mounted on a separate plate, so flex is less influenced.

Shock tower front
Black glass fibre shock tower with 3 upper shock mounting holes to choose from . Holes for an extra central body post are already made as well.

Front bracket
Machined alumnium front brackets, with belt tension adjusting through excenters. Suspension brackets in durable nylon.

Front suspension
Durable lower front wishbones connected to the inner brackets with strong steel pivot pins. An anti-roll bar system can be mounted as option.

C-hub / steering block
The c-hub type front system creates a super precise steering feeling with great feedback, and strong wheel guidance without chatter.

Shock tower rear
Black glass fibre shock tower with 4 upper shock mounting holes to choose from . The rear body posts are mounted to the top of the rear shock tower.

Rear bracket
Machined alumnium rear brackets, with belt tension adjusting through excenters. Suspension brackets in durable nylon with 3.0 RR RR and split type 0.0 blocks RR FR

Rear suspension
Durable lower rear wishbones connected to the inner brackets with strong steel pivot pins. An anti-roll bar system can be mounted as option.

Rear upright
Strong rear uprights with 2 upper positions, for perfect guidance of the rear wheels.

Motor mount
Machined aluminium motor mount / middle shaft support.

Middle shaft
Ballraced middle shaft with 2 small pully’s and the main Serpent spur gear.

Bumper
Large foam front bumper captured by a upper and lower nylon bumper

Body mount
Front body mount is mounted through the front bumper, and the rear ones are seated on the shock tower. Multiple body position holes to choose from.

Gear-diff
Very compact ballraced gear differential in the rear, with steel gears and axles for durability. Super smooth.

Spool
Front nylon lightweight spool with screw mounted front gear pully

Transmission / belts / pullies
Smooth low friction fine pitch belts combined with optimized nylon pullies.

Driveshaft / wheel hex / wheel axle
Steel driveshafts, combined with ballraced wheel axles and nylon wheel-hex adaptors

Steering system
Steering system with optimized ackermann for neutral steering-feeling.

Shock absorbers
Latest type RCM competition shock absorbers with membranes and checked color coded race springs.

Ball-bearings
Fully ballraced with oiled high speed sealed stainless steel bearings.

Manual and decals:
Full color assembly manual which shows clearly all assembly steps, has all exploded views for easy parts-finding and detailed list with spare parts and optional parts. Decal-sheet with Serpent and 411 logo’s are included as well.

Packing
The 411 Sport comes in a strong small carton box with full color printing.

Optional / upgrading
The Serpent 411 Sport is based on the high end race version of the 411. All parts from the 411 race-version and also all optional, also fit the 411 Sport. This allows you to upgrade your 411 Sport to a higher level race spec step by step, with the parts you select. The 411 Sport parts manual shows those parts, and you can find them in the optional section of the 411 Sport as well.

Product Type: Electric Cars > 1/10 190mm:
Class: 1/10th scale 190mm Electric
Purpose: 190mm touring car
Chassis: 2.5mm glass fibre, CNC machined
Suspension: Front C-Hub suspension system
Rear axle: Rear gear- differential
Front axle: Front nylon spool
Drive system: 4wd through 2 kevlar reinforced timing belts
Shock absorbers: RCM shock absorbers
Wheel base: 254mm +/- 4mm
Track-width front: 190mm /- 6mm
Track-width rear: 190mm /- 6mm
Adjustability: Camber, Caster, Up-Down-stops, Toe-in, width & Roll centres
Instructions: Full colour instruction manual, reference guide
Not included: Motor, battery, speed Controller, tires, body, radio equipment.

199.47€  Inc Tax
Serpent Medius X20 '21 MID CARBON 1/10 EP (SER400037)
Serpent Medius X20 '21 MID CARBON 1/10 EP

An evolution of the original X20 Medius!

Learning from the X20 we have improved some handling characteristics to make the car more nimble and improve corner speed, stiffening of the chassis in critical areas to change the flex points along with tweaking the roll centre has led to the all improved speed. A Refresh on the already smooth drivetrain gives us more acceleration and nicer torque delivery with the all new ball raced driveshaft system. Innovative New Steering hubs allow a multitude of setup combinations including an industry first axle offset option. The new X20’21 is lighter, faster and more adjustable.

539.85€  Inc Tax
Serpent Medius X20 MID ALU 1/10 EP (SER400034)
Serpent Medius X20 MID ALU 1/10 EP

X20 is the result of utilizing past years design of the Eryx and 4x 1/10 touring car. The chassis is based on the popular Medius mid motor design, using a light weight and strong 1 piece motor mount concept, without any interference between the front and rear chassis flex while still allowing center flex adjustability. The advantage for this style of design is to allow maximum flex capabilities without impacting the drivetrain, meaning smoother power delivery, more consistency and less chance of stripping spurs.

439.81€  Inc Tax
Kyosho Radio Controlled Touring Car FW-06 Audi R8 LMS 2015 1:10 Nitro Readyset (K.33210B)
Kyosho Radio Controlled Touring Car FW-06 Audi R8 LMS 2015 1:10 Nitro Readyset

Proven shaft-driven 4WD chassis with Syncro KT-231P 2.4GHz R/C system!
From beginner to race winner, this machine delivers smooth performance every time.

User-friendly with mild control response, the FW-06 is the perfect introduction to GP touring cars and the performance of this amazing machine seems to evolve as your driving technique improves. 2-speed automatic transmission combines with the high-power KE15-SP engine to make full use of the power band and maximize performance from KYOSHO's proven shaft-driven 4WD chassis. With the same rear suspension as the World Champion V-ONE RRR with setting options and maintenance-friendly features only available on the latest racing machines, the FW-06 chassis also meets the demands of expert-level drivers. All this performance is packed into a fully-assembled Readyset. Equipped with the 2.4GHz Syncro KT-231P transmitter, finding an open frequency is a problem of the past. In addition to the dual-rate function, the KT-231P also features a failsafe function that automatically reduces the throttle if radio signal is interrupted. Simply switch the power on and you can be on the track and clocking race-winning times straight away.

●Loaded with KE15-SP engine with slide carburetor fitted with slow idle adjustment and return spring.
●Reliable universal swing shafts included on front.
●Turnbuckle tie-rods used for steering rod and rear upper arms for fully adjustable alignment.
●KYOSHO's proven center-shaft drive 4WD provides light control response.
●Disk brakes deliver reliable and responsive braking control.
●Unique compact recoil starter without one-way clutch realizes lower resistance and starts the engine with a pull on the starter cord.
●Equipped with a total of 22 ball bearings for highly-efficient, full-bearing specification.
●Fitted with tuned muffler and large air cleaner.
●High-grip rubber tires with inner sponge supports are pre-glued onto wheels.
●Compatible with many FW-05 parts. *Not compatible with some parts.

. Technical Data:
■Length 372mm
■Width 200mm
■Height 100mm (approx.)
■Ground Clearance 5mm
■Wheelbase 258mm
■Tread (F/R) 176mm
■Tire(F/R) φ66×25mm
■Gear Ratio 7.47 / 5.44:1
■Weight 1,800g (approx.)
■Engine KE15SP with recoil starter

Kit contents:
●Fully-assembled chassis complete with pre-set control linkages
●Pre-mounted KE15SP engine with recoil starter
●Special manifold and muffler
●Finished pre-cut body complete with paint and stickers applied
●Syncro KT-231P+ transmitter

Required for operation:
●8 x AA-size alkaline batteries for R/C system
●Fuel
●Fuel bottle
●Plug heater

379.42€  Inc Tax
Kyosho Radio Controlled Touring Car FW-06 Chevy Camaro Z28 1:10 Nitro Readyset (K.33213B)
Kyosho Radio Controlled Touring Car FW-06 Chevy Camaro Z28 1:10 Nitro Readyset

Proven shaft-driven 4WD chassis with Syncro KT-231P 2.4GHz R/C system!
From beginner to race winner, this machine delivers smooth performance every time.

User-friendly with mild control response, the FW-06 is the perfect introduction to GP touring cars and the performance of this amazing machine seems to evolve as your driving technique improves. 2-speed automatic transmission combines with the high-power KE15-SP engine to make full use of the power band and maximize performance from KYOSHO's proven shaft-driven 4WD chassis. With the same rear suspension as the World Champion V-ONE RRR with setting options and maintenance-friendly features only available on the latest racing machines, the FW-06 chassis also meets the demands of expert-level drivers. All this performance is packed into a fully-assembled Readyset. Equipped with the 2.4GHz Syncro KT-231P transmitter, finding an open frequency is a problem of the past. In addition to the dual-rate function, the KT-231P also features a failsafe function that automatically reduces the throttle if radio signal is interrupted. Simply switch the power on and you can be on the track and clocking race-winning times straight away.

●Loaded with KE15-SP engine with slide carburetor fitted with slow idle adjustment and return spring.
●Reliable universal swing shafts included on front.
●Turnbuckle tie-rods used for steering rod and rear upper arms for fully adjustable alignment.
●KYOSHO's proven center-shaft drive 4WD provides light control response.
●Disk brakes deliver reliable and responsive braking control.
●Unique compact recoil starter without one-way clutch realizes lower resistance and starts the engine with a pull on the starter cord.
●Equipped with a total of 22 ball bearings for highly-efficient, full-bearing specification.
●Fitted with tuned muffler and large air cleaner.
●High-grip rubber tires with inner sponge supports are pre-glued onto wheels.
●Compatible with many FW-05 parts. *Not compatible with some parts.

. Technical Data:
■Length 461mm
■Width 210mm
■Height 135mm (approx.)
■Ground Clearance 5mm
■Wheelbase 258mm
■Tread (F/R) 176mm
■Tire(F/R) φ66×25mm
■Gear Ratio 7.47 / 5.44:1
■Weight 1,800g (approx.)
■Engine KE15SP with recoil starter

Kit contents:
●Fully-assembled chassis complete with pre-set control linkages
●Pre-mounted KE15SP engine with recoil starter
●Special manifold and muffler
●Finished pre-cut body complete with paint and stickers applied
●Syncro KT-231P+ transmitter

Required for operation:
●8 x AA-size alkaline batteries for R/C system
●Fuel
●Fuel bottle
●Plug heater

398.33€  Inc Tax
Kyosho Radio Controlled Touring Car FW-06 Alpine GT4 1:10 Nitro Readyset (K.33212B)
Kyosho Radio Controlled Touring Car FW-06 Alpine GT4 1:10 Nitro Readyset

Proven shaft-driven 4WD chassis with Syncro KT-231P 2.4GHz R/C system!
From beginner to race winner, this machine delivers smooth performance every time.

User-friendly with mild control response, the FW-06 is the perfect introduction to GP touring cars and the performance of this amazing machine seems to evolve as your driving technique improves. 2-speed automatic transmission combines with the high-power KE15-SP engine to make full use of the power band and maximize performance from KYOSHO's proven shaft-driven 4WD chassis. With the same rear suspension as the World Champion V-ONE RRR with setting options and maintenance-friendly features only available on the latest racing machines, the FW-06 chassis also meets the demands of expert-level drivers. All this performance is packed into a fully-assembled Readyset. Equipped with the 2.4GHz Syncro KT-231P transmitter, finding an open frequency is a problem of the past. In addition to the dual-rate function, the KT-231P also features a failsafe function that automatically reduces the throttle if radio signal is interrupted. Simply switch the power on and you can be on the track and clocking race-winning times straight away.

●Loaded with KE15-SP engine with slide carburetor fitted with slow idle adjustment and return spring.
●Reliable universal swing shafts included on front.
●Turnbuckle tie-rods used for steering rod and rear upper arms for fully adjustable alignment.
●KYOSHO's proven center-shaft drive 4WD provides light control response.
●Disk brakes deliver reliable and responsive braking control.
●Unique compact recoil starter without one-way clutch realizes lower resistance and starts the engine with a pull on the starter cord.
●Equipped with a total of 22 ball bearings for highly-efficient, full-bearing specification.
●Fitted with tuned muffler and large air cleaner.
●High-grip rubber tires with inner sponge supports are pre-glued onto wheels.
●Compatible with many FW-05 parts. *Not compatible with some parts.

. Technical Data:
■Length 463mm
■Width 220mm
■Height 129mm (approx.)
■Ground Clearance 5mm
■Wheelbase 258mm
■Tread (F/R) 176mm
■Tire(F/R) F66×25mm
■Gear Ratio 7.47 / 5.44:1
■Weight 1,800g (approx.)
■Engine KE15SP with recoil starter

Kit contents:
●Fully-assembled chassis complete with pre-set control linkages
●Pre-mounted KE15SP engine with recoil starter
●Special manifold and muffler
●Finished pre-cut body complete with paint and stickers applied
●Syncro KT-231P+ transmitter

Required for operation:
●8 x AA-size alkaline batteries for R/C system
●Fuel
●Fuel bottle
●Plug heater

398.33€  Inc Tax
Kyosho Radio Controlled Touring Car FW-06 2020 Mercedes-AMG GT3 1:10 Nitro Readyset (K.33214B)
Kyosho Radio Controlled Touring Car FW-06 2020 Mercedes-AMG GT3 1:10 Nitro Readyset

Proven shaft-driven 4WD chassis with Syncro KT-231P 2.4GHz R/C system!
From beginner to race winner, this machine delivers smooth performance every time.

User-friendly with mild control response, the FW-06 is the perfect introduction to GP touring cars and the performance of this amazing machine seems to evolve as your driving technique improves. 2-speed automatic transmission combines with the high-power KE15-SP engine to make full use of the power band and maximize performance from KYOSHO's proven shaft-driven 4WD chassis. With the same rear suspension as the World Champion V-ONE RRR with setting options and maintenance-friendly features only available on the latest racing machines, the FW-06 chassis also meets the demands of expert-level drivers. All this performance is packed into a fully-assembled Readyset. Equipped with the 2.4GHz Syncro KT-231P transmitter, finding an open frequency is a problem of the past. In addition to the dual-rate function, the KT-231P also features a failsafe function that automatically reduces the throttle if radio signal is interrupted. Simply switch the power on and you can be on the track and clocking race-winning times straight away.

●Loaded with KE15-SP engine with slide carburetor fitted with slow idle adjustment and return spring.
●Reliable universal swing shafts included on front.
●Turnbuckle tie-rods used for steering rod and rear upper arms for fully adjustable alignment.
●KYOSHO's proven center-shaft drive 4WD provides light control response.
●Disk brakes deliver reliable and responsive braking control.
●Unique compact recoil starter without one-way clutch realizes lower resistance and starts the engine with a pull on the starter cord.
●Equipped with a total of 22 ball bearings for highly-efficient, full-bearing specification.
●Fitted with tuned muffler and large air cleaner.
●High-grip rubber tires with inner sponge supports are pre-glued onto wheels.
●Compatible with many FW-05 parts. *Not compatible with some parts.

. Technical Data:
■Length 464mm
■Width 200mm
■Height 123mm (approx.)
■Ground Clearance 5mm
■Wheelbase 258mm
■Tread (F/R) 176mm
■Tire(F/R) φ66×25mm
■Gear Ratio 7.47 / 5.44:1
■Weight 1,800g (approx.)
■Engine KE15SP with recoil starter

Kit contents:
●Fully-assembled chassis complete with pre-set control linkages
●Pre-mounted KE15SP engine with recoil starter
●Special manifold and muffler
●Finished pre-cut body complete with paint and stickers applied
●Syncro KT-231P+ transmitter

Required for operation:
●8 x AA-size alkaline batteries for R/C system
●Fuel
●Fuel bottle
●Plug heater

398.33€  Inc Tax
Kyosho Radio Controlled EP 4WD 1:10 Touring Car FAZER Mk2 FZ02 Chassis Kit (K.34461B)
Kyosho Radio Controlled Electric Powered 4WD 1:10 Touring Car FAZER Mk2 FZ02 Chassis Kit

Equipped with popular optional parts

This chassis kit is an optimal base for a racing vehicle

The FAZER Mk2 Readyset was created for the pure enjoyment of R/C car driving. Now available as a chassis kit, owners have the flexibility to add their own body and R/C system. Specifications have been elevated with optional parts such as HD TC center shaft S and TC universal swing shaft L to enhance the unrivaled symmetrical design and front-rear suspension balance of the lightweight chassis for R/C racers to enjoy. While the deckless design looks simple, a reduced number of components improves maintenance efficiency and optimizes torsional rigidity. Incorporation of nylon material further reduces weight and improves impact resistance. With its unique design, the FZ02 chassis embodies features and performance that will appeal to R/C drivers of all levels.

● 40% pre-assembled (shocks and diff gears are not filled with oil so assembly can be completed to preferred setting). The FZ02’s effective low center of gravity design compliments the high strength and rigidity realized through front & rear stiffeners and rib reinforcement at key sections of the chassis.
● Duralumin HD TC center shaft S (FAW209) provides increased rigidity compared to the standard resin shaft included in the Readyset. In addition to smoother driving transmission, the red anodized color has striking visual appeal.
● TC Universal swing shafts L (FAW202) on the front drive section don’t drop out on heavy contact like dog bone shafts. In addition, the swing shafts deliver consistent drive transmission even when joint is at a wide steering angle.
● A special resin transponder mounting stay is included for when the chassis is competing in race events. There is no need to make a handmade stay or holes in the body to fit a transponder.

Technical data:
● Length 375mm
● Width 200mm/190mm
● Ground clearance 8mm (approx.)
● Wheelbase 260mm
● Tread(Body width:190mm)F:164mm/R:164mm
● Tread(Body width:200mm)F:174mm/R:174mm
● Tires F: φ66mm x 25mm/R:φ66mm x 25mm
● Gear Ratio 6.54:1
● Total storage weight Approx. 1490g (with 7.4V / 4000 LiPo)

Kit contents:
● 40% pre-assembled chassis
● FAW202 TC Universal Swing Shaft S
● FAW209 HD TC Center Shaft S
● Aluminum Motor Dust Plate
● transponder mounting stay
● +0mm off-set wheel hub & M4 x 16 Wheel screw(for 190mm width body)
● +5mm off-set wheel hub & M4 x 22 Wheel screw(for 200mm width body)
● body mounts for various manufacturers bodies
● FAT701M TC Tires(M)
● Inner Sponge
● VZH003BK Wheel
● 1.5/2.0/2.5mm Hexagonal wrench
● 3/4/5/5.5/7/8mm Spanner


Required for operation:
● 2ch 1 servo R/C system for cars(Receiver size:L45xW28xH22mm or less)
● Body
● 540-550 class motor
● ESC compatible with motor used(Size:L36xW32xH23mm or less)
● Servo
● Battery charger
● Battery for chassis compatible with ESC used(SIze:L145xW47xH25mm or less)
● 4 x AA batteries for transmitter
● Damper Oil
● Grease(for Ring Gear & Diff
● Silicone OIL(for Diff
● Velvet Coating Pinion Gear No.PNGA4832 - No.PNGA4837 (for brushless motor )
● Steel Pinion Gear No.PNGS4829 - No.PNGS4836 (for brushless motor )
● Paint for polycarbonate body
● Tools

159.82€  Inc Tax
Per Page      1 - 15 of 15
  • 1