Search

Search Criteria

 
 
 
 

Products meeting the search criteria

Sort By:  
Joysway Magic Cat V5 Micro Radio Controlled Speedboat Model (RTR / Readyset) 265mm (4ST308108)
Joysway Magic Cat V5 Micro Radio Controlled Speedboat Model RTR (ready to ride) 265mm

Specification:
Hull Length: 220 mm
Total Length: 265 mm
Width: 72 mm
Weight: 170g (RTR)
Hull Material: ABS Injection molding with colorful painting decal stickers

Box content:
Magic Cat V5 Speedboat 265mm
2.4GHz 2-Ch digital proportional radio control system (transmitter)
Powerful water cooled 180 motor
5A electronic speed controller
9g waterproof rudder servo
6.4V 320mAh LiFePO4 battery pack
USB charger & USB DC adapter
9V dry batter (for transmitter)
ABS display boat stand

Required for operation:
All included - RTR (ready to run)

54.90€  Inc Tax
Kyosho JET STREAM 888VE - Electric READYSET (KT231P,KA120,91WC,TORX M4) (K.40232S2)

Experience the full force of 60km/h speed as soon as you open the box! Serious offshore racer features auto-recovery from capsize function.

Hit maximum speed of approximately 60km/h with 14.8V 4-cell Li-Po battery (sold separately). The high-performance EP Jet Stream 888VE Readyset features incremental changes and includes Kyosho’s highest specification transmitter, receiver and rudder servo combination. In the event of capsize; weight balance is changed by water entering the ballast room to right the hull to its normal posture and automatically drain out allowing the boat to continue running. This unsinkable design removes the risk and worry of losing your boat if it flips over. The high-precision CNC aluminum intake rudder with bracket and the high-durability metal adjustable flaps with excellent wave resistance are retained while the R/C system is upgraded to the KS4031-06W waterproof servo that removes any concerns from flooding and delivers superior response with the Syncro KT-231P transmitter with 130m range for wider control and reliability. The high torque outrunner type brushless motor combines with the waterproof KYOSHO SPEED HOUSE 120A KA120-91WC water-cooled to provide a racing boat experience like no other.

  • Pre-colored FRP factory assembled hull reaches speeds of 60km/h.
  • Newly designed high-power KYOSHO SPEED HOUSE 120A KA120-91WC water-cooled features cell auto-detect.
  • Pre-installed brushless outrunner water-cooled motor generates excellent torque characteristics.
  • Unsinkable self-righting structure.
  • Flip-up rudder design prevents damage if boat contacts an obstacle.
  • Equipped with combination turn fin and trim tab with adjustable angle.
  • Features stopper to prevent loss of shaft.
  • Includes drip proof rubber boots, aluminum servo mount, carbon nylon 3-blade propeller.


Technical datas:

Length: 900mm
Width: 187mm
Height140mm
Weight: 1780g (approx. installed 14.8V-1400mAh)
Motor:  KYOSHO SPEED HOUSE TORX M4 Brushless water-cooled motor (battery 3-4 cell 11.1V-14.8V-3,600-4,000mAh Li-Po, *battery sold separately)
Screw: Carbon-reinforced nylon D40 x P1.4 (3-blade)
ESC: KYOSHO SPEED HOUSE 120A KA120-91WC water-cooled
Servo: KS-4031-06W

Readyset Contents 

  • Pre-colored fully assembled hull
  • Syncro KT-200 transmitter
  • Water-cooled brushless motor
  • Water-cooled 80A ESC
  • Wire joint drive unit
  • Duralumin water intake rudder unit
  • Boat stand
  • Spare propeller
  • Pre-installed 2.4GHz Synchro KT-231P R/C system


Required for Operation

  • 3-4 cell 11.1V-14.8V-3,600-4,000mAh Li-Po battery (Super Plug specification/compatible size: L:138 x W:42 x H:33)
  • Charger for Li-Po battery
  • Batteries for transmitter
564.86€  Inc Tax
Kyosho HURRICANE 900VE - Electric READYSET (KT231P,KA120,91WC,TORX M6) (K.40235S)

Breathtaking high-speed performance realized in a Readyset!
Now everyone can enjoy the thrill of a C-1 class catamaran racing boat!

You won’t believe your eyes at this stunningly realistic recreation of a C-1 class catamaran. Built to an interior display standard, you cannot help but admire the sleek form and the high-quality finish. However, the HURRICANE 900VE is not known just for its scale appearance. Setting the benchmark for 900mm class electric racing boat performance, the precision-crafted pre-painted FRP hull is the embodiment of KYOSHO’s many years of R/C boat design know-how and incorporates the latest KYOSHO SPEED HOUSE water-cooled brushless motor and water-cooled ESC with maximum current of 120A. Combined with the precision angle of the wire drive, the hull accelerates from a standing start with minimal cavitation from the propeller to its planning posture in next to no time. Speed increases quickly after the lift from the initial acceleration as the characteristics of the low-profile catamaran hull design deliver high-speed performance across the water. Specifications of the Readyset produce enough speed and performance to compete without modification. However, with optional parts such as the metal propeller (BPMC440-3), top speed can reach up to 75km/h. Packaged as a Readyset puts this advanced design and pure racing boat features within easy reach for anyone. Fully assembled, the HURRICANE 900VE is pre-installed with the high-performance 2.4GHz Perfex KT-231P+ R/C system.

Add your own Li-Po battery and charger and the latest in topline EP racing boats is at your fingertips. The HURRICANE also makes a great step up from beginner EP racing boats too. Experience the power and performance of this high-end racing boat for yourself!

  • Factory assembled precision-built FRP hull is complete with coloring
  • Pre-installed KYOSHO SPEED HOUSE 40x68mm large water-cooled brushless motor.
  • Pre-installed KYOSHO SPEED HOUSE 120A water-cooled, waterproof ESC.
  • Machine cut CNC aluminum drive brackets enable adjustment of running posture.
  • Equipped with high-torque rudder servo.
  • Includes drip-proof rubber boots, aluminum servo mount, carbon nylon 3-blade screw (with spare).

Technical data:

  • Length : 945mm 
  • Width : 230mm
  • Weight : 2350g
  • Motor : KYOSHO SPEED HOUSE TORX M6 water-cooled brushless motor (40x68mm, KV1250) 
  • Battery : 2 x 3 cell 11.1V-3600-4000mAh LiPo battery (Super Plug specification, sold separately)
  • R/C System : Perfex KT-231P+ 
  • Propeller : D40×P1.4(3-blade)
  • ESC : KYOSHO SPEED HOUSE KA120-91WC 120A water-cooled, waterproof brushless ESC


Kit Contents:

  • Pre-colored fully assembled hull 
  • 2.4GHz Syncro KT-231P+ Transmitter
  • Water-cooled brushless motor 
  • Water-cooled brushless ESC (120A)
  • Rudder Servo
  • Waterproof clear tape
  • Boat Stand 
  • Spare propeller


Required for operation: 

  • 22.2V 3600-4000mAh LiPo battery (Super Plug specification, 3-cell x 2 packs, one pack for each side)
  • (compatible size : L162 x W46 x H40mm or less)
  • Recommended : No.GAB2301 Gens ace LiPo4000 (45C/11.1V/soft pack)
  • Quick Charger for LiPo battery 
  • 4 x AA sized alkaline batteries for transmitter

 

661.24€  Inc Tax
Hobbywing Seaking 180A V3 3-6S Boat ESC System, 5A BEC (HW30302401)
Hobbywing Seaking 180A V3 3-6S Boat ESC System, 5A BEC

Performance & Reliability
Built with high-quality components and coupled with cutting-edge firmware, the Seaking 180A V3 is featured by unmatched performance and reliability. Multiple safety adjustable options are in use, with the implementation of the low-voltage cutoff protection, thermal protection and throttle signal loss protection.

Efficient Cooling System
The Hobbywing patented heat-conductive copper bar cover on the power board of the Seaking 180A V3 can efficiently and effectively transfer heat to the integrated CNC machined billet aluminum water cooled heat sink housing thus keeping your ESC as cool as possible.

Waterproof Design
100% waterproof without the need of extra protection.

Built-in BEC
The built-in switch mode BEC with a maximum output of 5A and voltage of 6V make this ESC compatible with high voltage servo.

Special Algorithm Design
The special algorithm implemented in the ESC make the acceleration more incredible and sailing more stable.

Separate PRG/FAN Port
The separate PRG/FAN port on the ESC can connect ESC to a program box (via the standard programming cable) and start ESC programming.

Specifications
Brushed/Brushless: Brushless
Waterproof: Yes
Cont./Peak Current: 180A/1080A
Input: 3-6S LiPo / 9-18 cells NiMh
BEC Output: Switch Mode: 6V, 5Amp
Input Wires: Red-10AWG-200mm*1/Black-10AWG-200mm*1
Output Wires: Black-10AWG-150mm*3
Input Connectors: No
Output Connectors: 6mm gold connectors (female)
Transmitter: Supported
LED Program Card: Not Supported
LED Program Box: Supported
LCD Program Box: Not Supported
WiFi Module: Not Supported
Firmware Upgrade: Not Supported
Size: 72x48x37mm
Weight: 207g
Cooling pipe: Ф3.0/5.4 mm
Application: Boat length <130cm

139.69€  Inc Tax
Hobbywing Seaking 130A HV V3 5-12S Boat ESC System (HW30301200)
Hobbywing Seaking 130A HV (high voltage) V3 5-12S Boat ESC System (without BEC)

Performance & Reliability
Built with high-quality components and coupled with cutting-edge firmware, the Seaking 130A V3 is featured by unmatched performance and reliability. Multiple safety adjustable options are in use, with the implementation of the low-voltage cutoff protection, thermal protection and throttle signal loss protection.

Efficient Cooling System
The Hobbywing patented heat-conductive copper bar cover on the power board of the Seaking 130A V3 can efficiently and effectively transfer heat to the integrated CNC machined billet aluminum water cooled heat sink housing thus keeping your ESC as cool as possible.

Waterproof Design
100% waterproof without the need of extra protection.

Special Algorithm Design
The special algorithm implemented in the ESC make the acceleration more incredible and sailing more stable.

Separate PRG/FAN Port
The separate PRG/FAN port on the ESC can connect ESC to a program box (via the standard programming cable) and start ESC programming.

Specifications
Brushed/Brushless: Brushless
Waterproof: Yes
Cont./Peak Current: 130A/720A
Input: 5-12S LiPo / 15-36 cells NiMh
BEC Output: (without BEC)
Input Wires: Red-10AWG-200mm*1/Black-10AWG-200mm*1
Output Wires: Black-12AWG-100mm*3
Input Connectors: No
Output Connectors: No
Transmitter: Supported
LED Program Card: Not Supported
LED Program Box: Supported
LCD Program Box: Not Supported
WiFi Module: Not Supported
Firmware Upgrade: Not Supported
Size: 88x58x23mm
Cooling pipe: Ф3.6/5.0 mm
Weight: 182g
Application: Boat length <150cm

199.47€  Inc Tax
Hobbywing Seaking 120A V3 2-6S Boat ESC System, 5A BEC (HW30302360)
Hobbywing Seaking 120A V3 2-6S Boat ESC System, 5A BEC

Performance & Reliability
Built with high-quality components and coupled with cutting-edge firmware, the Seaking 120A V3 is featured by unmatched performance and reliability. Multiple safety adjustable options are in use, with the implementation of the low-voltage cutoff protection, thermal protection and throttle signal loss protection.

Efficient Cooling System
The Hobbywing patented heat-conductive copper bar cover on the power board of the Seaking 120A V3 can efficiently and effectively transfer heat to the integrated CNC machined billet aluminum water cooled heat sink housing thus keeping your ESC as cool as possible.

Waterproof Design
100% waterproof without the need of extra protection.

Built-in BEC
The built-in switch mode BEC with a maximum output of 5A and voltage of 6V make this ESC compatible with high voltage servo.

Special Algorithm Design
The special algorithm implemented in the ESC make the acceleration more incredible and sailing more stable.

Separate PRG/FAN Port
The separate PRG/FAN port on the ESC can connect ESC to a program box (via the standard programming cable) and start ESC programming.

Specifications
Brushed/Brushless: Brushless
Waterproof: Yes
Cont./Peak Current: 120A/720A
Input: 2-6S LiPo / 6-18 cells NiMh
BEC Output: Switch Mode: 6V, 5Amp
Input Wires: Red-12AWG-200mm*1/Black-12AWG-200mm*1
Output Wires: Black-12AWG-150mm*3
Input Connectors: No
Output Connectors: 4mm gold connectors (female)
Transmitter prog.: Supported
LED Program Card: Not Supported
LED Program Box: Supported
LCD Program Box: Not Supported
WiFi Module: Not Supported
Firmware Upgrade: Not Supported
Size: 69x40x32mm
Cooling pipe: Ф3.0/5.4 mm
Weight: 150g
Application: Boat length <110cm

99.43€  Inc Tax
Hobbywing Seaking 60A V3.1 2-3S Boat ESC System, 3A BEC (HW30302200)
Hobbywing Seaking 60A V3.1 2-3S Boat ESC System, 3A BEC

Performance & Reliability
Built with high-quality components and coupled with cutting-edge firmware, the Seaking 60A V3.1 is featured by unmatched performance and reliability. Multiple safety adjustable options are in use, with the implementation of the low-voltage cutoff protection, thermal protection and throttle signal loss protection.

Efficient Cooling System
The Hobbywing patented heat-conductive copper bar cover on the power board of the Seaking 60A V3.1 can efficiently and effectively transfer heat to the integrated CNC machined billet aluminum water cooled heat sink housing thus keeping your ESC as cool as possible.

Waterproof Design
100% waterproof without the need of extra protection.

Built-in BEC
The built-in switch mode BEC with a maximum output of 3A and voltage of 6V make this ESC compatible with high voltage servo.

Special Algorithm Design
The special algorithm implemented in the ESC make the acceleration more incredible and sailing more stable.

Separate PRG/FAN Port
The separate PRG/FAN port on the ESC can connect ESC to a program box (via the standard programming cable) and start ESC programming.

Specifications
Brushed/Brushless: Brushless
Waterproof: Yes
Cont./Peak Current: 60A/360A
Input: 2-3S LiPo / 5-9 cells NiMh
BEC Output: Switch Mode: 6V, 3Amp
Input Wires: Red-14AWG-150mm*1/Black-14AWG-150mm*1
Output Wires: Black-14AWG-100mm*3
Input Connectors: No
Output Connectors: 4mm gold connectors (female)
Transmitter prog.: Supported
LED Program Card: Not Supported
LED Program Box: Supported
LCD Program Box: Not Supported
WiFi Module: Not Supported
Firmware Upgrade: Not Supported
Size: 61x39x26mm
Cooling pipe: Ф2.0/4.0 mm
Weight: 95g
Application: Boat length <70cm

79.91€  Inc Tax
Hobbywing Seaking 30A V3 2-3S Boat ESC System, 1A BEC (HW30302060)
Hobbywing Seaking 30A V3 2-3S Boat ESC System, 1A BEC

Performance & Reliability
Built with high-quality components and coupled with cutting-edge firmware, the Seaking 30A V3 is featured by unmatched performance and reliability. Multiple safety adjustable options are in use, with the implementation of the low-voltage cutoff protection, thermal protection and throttle signal loss protection.

Efficient Cooling System
The Hobbywing patented heat-conductive copper bar cover on the power board of the Seaking 30A V3 can efficiently and effectively transfer heat to the integrated CNC machined billet aluminum water cooled heat sink housing thus keeping your ESC as cool as possible.

Waterproof Design
100% waterproof without the need of extra protection.

Built-in BEC
The built-in switch mode BEC with a maximum output of 1A and voltage of 6V make this ESC compatible with high voltage servo.

Special Algorithm Design
The special algorithm implemented in the ESC make the acceleration more incredible and sailing more stable.

Separate PRG/FAN Port
The separate PRG/FAN port on the ESC can connect ESC to a program box (via the standard programming cable) and start ESC programming.

Specifications
Brushed/Brushless: Brushless
Waterproof: Yes
Cont./Peak Current: 30A/180A
Input: 2-3S LiPo / 5-9 cells NiMh
BEC Output: Switch Mode: 6V, 1Amp
Input Wires: Red-14AWG-100mm*1/Black-14AWG-100mm*1
Output Wires: Black-16AWG-75mm*3
Input Connectors: No
Output Connectors: 3.5mm gold connectors (female)
Transmitter prog.: Supported
LED Program Card: Not Supported
LED Program Box: Supported
LCD Program Box: Not Supported
WiFi Module: Not Supported
Firmware Upgrade: Not Supported
Size: 55x29x19mm
Cooling pipe: Ф2.0/4.0 mm
Weight: 41g
Application: Boat length <45cm

39.65€  Inc Tax
Hobbywing Seaking 3660SL Brushless Motor for Boats 2-4S 3180kV (HW90070030)
Hobbywing Seaking 3660SL Brushless Motor for Boats 2-4S 3180kV

The Seaking Brushless motors are high-quality electric motors of the most popular performance classes. High-quality CNC milled aluminum components impress with concentric precision and finely-balanced components. Together with the neodymium magnets and the double ball bearings, these motors have a very high running stability. They are water cooled through a push on cooling sleeve and sealed by two O-rings. The winding is made of high-quality copper for the highest efficiency and to keep the thermal resistance at minimum levels.

Features:
High torque
High-quality neodymium magnets
Water cooled
Double ball bearing
High-speed bearings
Precision made and balanced parts
CNC milled high quality aluminum parts
Replacement O-rings included

Specification:
Motor ID: 3660SL
Pole: 4
LiPo:2-4S
kV: 3060
Max Current (A) / Max Vol (V): 94A/16.8V
No Load Current (A) @ 7.4V: 2.7A
Resistance: 0.0058
Diameter: 36mm
Diameter of water cooling pipe: Ф5mm
Length (without shaft): 60mm
Shaft Diameter: 5mm
Shaft Length: 16mm
Weight: 240g

99.43€  Inc Tax
Hobbywing Seaking 2848SL Brushless Motor for Boats 2-3S 3900kV (HW90070010)
Hobbywing Seaking 2848SL Brushless Motor for Boats 2-3S 3900kV

The Seaking Brushless motors are high-quality electric motors of the most popular performance classes. High-quality CNC milled aluminum components impress with concentric precision and finely-balanced components. Together with the neodymium magnets and the double ball bearings, these motors have a very high running stability. They are water cooled through a push on cooling sleeve and sealed by two O-rings. The winding is made of high-quality copper for the highest efficiency and to keep the thermal resistance at minimum levels.

Features:
High torque
High-quality neodymium magnets
Water cooled
Double ball bearing
High-speed bearings
Precision made and balanced parts
CNC milled high quality aluminum parts
Replacement O-rings included

Specification:
Motor ID: 2848SL
Pole: 2
LiPo:2-3S
kV: 3900
Max Current (A) / Max Vol (V): 41A/12.6V
No Load Current (A) @ 7.4V: 2.4A
Resistance: 0.0155
Diameter: 27.8mm
Diameter of water cooling pipe: Ф5mm
Length (without shaft): 48mm
Shaft Diameter: 3.175mm
Shaft Length: 12mm
Weight: 135g

69.54€  Inc Tax
Hobbywing Seaking 2040SL Brushless Motor for Boats 2-3S 4800kV (HW90070000)
Hobbywing Seaking 2040SL Brushless Motor for Boats 2-3S 4800kV

The Seaking Brushless motors are high-quality electric motors of the most popular performance classes. High-quality CNC milled aluminum components impress with concentric precision and finely-balanced components. Together with the neodymium magnets and the double ball bearings, these motors have a very high running stability. They are water cooled through a push on cooling sleeve and sealed by two O-rings. The winding is made of high-quality copper for the highest efficiency and to keep the thermal resistance at minimum levels.

Features:
High torque
High-quality neodymium magnets
Water cooled
Double ball bearing
High-speed bearings
Precision made and balanced parts
CNC milled high quality aluminum parts
Replacement O-rings included

Specification:
Motor ID: 2040SL
Pole: 2
LiPo:2-3S
kV: 4800
Max Current (A) / Max Vol (V): 20A/12.6V
No Load Current (A) @ 7.4V: 1.8A
Resistance: 0.0399
Diameter: 20mm
Diameter of water cooling pipe: Ф4mm
Length (without shaft): 40mm
Shaft Diameter: 2.3mm
Shaft Length: 12.5mm
Weight: 60g

42.70€  Inc Tax
Per Page      1 - 11 of 11
  • 1