Search

The brutal power of this machine is meant for expert hands only!

Top-level drivers proclaim this as the most extreme power in an R/C model ever experienced! This extraordinary monster truck features a 3-diff shaft drive full time 4WD chassis with a design running thick with the DNA of the multiple world-championship winning Inferno. The combination of 22.2V 6-cell LiPo battery and 2000Kv KYOSHO SPEED HOUSE TORX8 brushless motor produces a ferocious power to weight ratio that delivers explosive acceleration and top speeds of more than 80km/h. If you are not in full control of the throttle, it can back flip and leave onlookers completely lost for words. This formidable power is harnessed with a high-rigidity bulkhead, hardened chassis, reinforced transmission and diff ring gears, dial adjustable large capacity oil shocks and shock resistant battery case. This feature packed machine comes as a fully assembled Readyset package and requires no frequency band setting with the 2.4GHz Syncro KT-231P+ transmitter and ultra high-torque KS5031-09MW steering servo system pre-installed 4-color printed body is included so you only need to add your own charged LiPo battery and batteries to the transmitter for the mayhem to start. We would like to say this model is for everyone, but such is the power of this machine only expert level drivers can have some degree of confidence in managing its extreme performance. There has never been a monster truck like this one, and maybe there never will be!

●3 diff shaft drive full time 4WD chassis and 22.2V + brushless motor produce power like never before.
●Fully factory assembled Readyset.
●Pre-cut 4 color printed body.
●Pre-installed 2000Kv KYOSHO SPEED HOUSE TORX8 brushless motor. (drip proof)
●2.4GHz R/C system with Syncro KT-231P+ transmitter requires no frequency band control.
●Includes waterproof ultra high torque KS5031-09MW steering servo.
●Incorporates many reinforced parts such as hardened main chassis.
●Features machined aluminum dial adjustable big bore shocks.
●Straight cut bevel gears made from special toughened steel and gear modules on the reinforced diff ring gear are designed to match the machine’s extreme level of power.Equipped with 6-spoke wheels & block tires. Balances rough road running power with high level grip performance.
●Stabilizers and universal joints are equipped on front and rear.
●Mud guard installed on rear axle provides protection from dirt and mud. Promises stable performance under various running conditions.
●Resin chassis stiffener as used on the Inferno NEO is installed on front and rear.
●Full bearing specification features 18 bearings through the drive system and wheels with 2 in the clutch bell.
●Large bumper provides protection for the front suspension holders and lower arm plate.
●Compatible with many optional parts for the Inferno series.

Technical data:
Length: 550mm
Width: 410mm
Height: 210mm
Wheelbase: 355mm
Tread (F/R): 345mm / 345mm
Tire (F/R): 148 x 66mm / 148 x 66mm
Gear Ratio: 17.2：1
Weight: 4,650g
Motor: KSH TORX 8 - 2000kV

Readyset Content:
Pre-assembled chassis with pre-set control linkages
Factory assembled printed body
2.4GHz R/C system Syncro KT-201 pre-installed
L-shape hex wrenches: 1.5, 2.0, 2.5, 3.0mm
Cross wrench
17mm wheel wrench

Required for Operation:
4 x AA alkaline batteries for transmitter
Running battery (2 x 7.2 v Ni-MH or 2 x 2S/3S LiPo battery)
Battery Charger

MST Silver Gray 5H Wheel with AD Onroad Tires

• 4 pieces

TFL High quality Lock Nut Driver Set 4.0/5.5/7.0/8.0mm (Black)

Kyosho Air Filter Set for KE15SP Engine

Air Cleaner Set for .15 engines

Kyosho Air Filter Sponge Set for .21 and .25 engines

HD Air Cleaner Sponge Set (2 pieces)

Graupner Ski Set for Husky 1800S

Can be used on a similar sized radio controlled model airplanes with approx. 1800mm wingspan.

Length: 330mm
Width: 65mm
Height: 40mm
Weight: 330g

(only ski set, RC model airplane not included)

Pull-Pull control set with 1.0mm cable and M2 threaded cable coupler 

Pack content:
2x 1m steel wire (1mm dia.)
4x M2 cable coupler
4x ALU cable crimp
4x Shrink tube

Pull-Pull rudder control assembly for use in radio controlled (RC) airplanes, boats and and other models. 

C&Y Hinge Slotting Set

Use for radio controlled (RC) airplanes and other models.

MP JET Pull-Pull control set with 0.5mm cable and M2 threaded cable coupler 

Pack content:
2x 1m steel wire (0.5mm dia.)
4x M2 cable coupler
4x Brass cable crimp
2x Nylon ball links
2x Nylon clevis with brass safety pin
2x Control/Rudder horn with brass ball
2x M2 Screw
4x M2 Nut 

Pull-Pull rudder control assembly for use in radio controlled (RC) airplanes, boats and and other models.

Hobby Tech Rear In Line Pipe Set

Suitable for 1/8 off-road cars
Fit most .21 (3.5cc) nitro engines
Polished finish

Package:
The set includes pipe, header, three short pipe springs, one manifold spring and two manifold gaskets.

Use this exhaust pipe set for radio controlled (RC) offroad car, buggy or truck models.

TFL Racing Flat Tip and PH Screwdriver Set

Package: 4 pieces
Flat tip: 3.0/5.0mm
Phillips: 3.0/5.0mm


Use this tools for radio controlled (RC) airplanes, helicopters, onroad and offroad cars, buggies, trucks, crawlers and other models

Two-pin power connector with flat gold-plated contacts with max. load 50A (long term 25A) with grooved body for better grip and protection.

For cables up to 3.3 mm2 (12 AWG)
Transition resistance 0.45 mOhm, max. 500V

Packaging: 10 pieces / 5 pair

Use this connectors for radio controlled (RC) airplanes, helicopters, cars, trucks, buggies, boats and other models

Hitec Servo Wing Mount Set (HS-80/81/82)

Product Description
This is a universal mount designed to accept almost any micro servo. The top of the mount features an aerodynamic fairing designed to streamline airflow around the servo linkage.


Specifications:
Diameter (mm): 50
Thickness (mm): 14
Thickness with the fairing (mm): 28

Use this wing servo mount (servo mounting bracket) for radio controlled (RC) airplanes, gliders, hotliners, and other models.

This tire set fits Front and Rear
Most 1/10 Stadium Truck models with a 12mm wheel hex adapter and 1/2" Offset

Bead-Lock wheels
For some time now, the popularity of Bead-Lock wheels has been growing, in particular due to their scale-looks of the fixing screws in the outer rings of the wheel.

The big difference between Bead-Lock and regular wheels. With Bead-Lock wheels, the tires are not glued but clamped and screwed onto the wheel. The special way of clamping and the strong fastening of the screws ensures that the tire stays firmly on the wheel.

Due to the extreme loads during driving, cornering and high jumps, the design of the wheel and the materials used are extremely important. The proper flexibility and strength allow the Louise RC wheels to withstand these heavy forces. The wheels are made of a mixture of high quality nylon granulates, charged with fiber or without. These composites have been specially developed by Dupont® for Louise RC.

Tire inserts
The tires are mounted either with special preformed foam inserts or with cut-to-size foam inserts. The inserts are selected in a specific density and size in order to guarantee perfect dampening and form stability of the tire.

MFT Technology
MFT stands for Micro Fiber Technology. This technology indicates the presence of a textile belt in the rubber tread of the tire to prevent the tire from deforming and ballooning during high speed operations.

The MFT technology keeps the tire in shape, even during powerful accelerations and high-speed runs.
The well-known ballooning of a normal tire without MFT technology that disturbs the entire shape and where the diameter of the tire changes under these extreme conditions, is now part of the past. The MFT Technology provides increased stability, significant more road contact and the tire life is extended.

Louise RC has years of experience in producing high performance tires for RC cars. The RC hobby driver and the RC basher have totally different requirements for the tires than the RC competition car driver. From this experience the special sports rubber compound has been developed. The sport rubber compound comes in 2 densities, soft or medium-soft. For the lighter 1/10 cars the soft compound is mainly used and for the more powerful and usually heavier 1/8 models the medium-soft compound is applied.

Tech Specs
Car Type: 1/10 Stadium Truck
Wheel Adapter: Hex 12mm
Wheel Off-Set: 1/2"-Offset
Wheel Color: Black
Wheel Dia.: 2.8" - 71mm
Wheel Type: Bead Lock
Wheel Material: Nylon Composite
Tire Techn.: MFT - Micro Fiber Technology
Tire Compound: Sport - Soft
Tire Size: 119x56mm

Use for radio controlled offroad car (buggy) and other RC models.

Kyosho Air Filter Sponge Set for KE15SP Engine

Air Cleaner Sponge for .15 engines (3 pieces)

TFL Racing Quick Change Hex Wrench Set 1.5/2.0/2.5/3.0mm

Tool for 1:8 and 1:10 cars, buggies, truggies, trucks,..

TFL Racing Flat Tip and PH Screwdriver Set

Package: 4 pieces
Flat tip: 4.0/6.0mm
Phillips: 4.0/6.0mm


Use this tools for radio controlled (RC) airplanes, helicopters, onroad and offroad cars, buggies, trucks, crawlers and other models