Search

Search Criteria

 
 
 
 

Products meeting the search criteria

Sort By:  
Governor Sensor MICROBEAST Plus (HEGBP001)

• Suitable for T-REX 600N / T-REX 700N
• Must use with:

- BEASTX MICROBEAST Plus Flybarless System


Content

• 1x Beastx Governor Sensor (255mm/6pin connector)
• 2x RPM Magnet (4x1.6mm)


10.98€  Inc Tax
MICROBEAST PLUS Flybarless System (BXM76400)

MICROBEAST Plus is a 3-axis control system for flybarless RC model helicopters. MEMS sensors of the latest generation measure the aircrafts rotational movement with unprecedented precision and transmit the data digitally and in real time to the system.

The housing made of plastic composite material keeps the weight of MICROBEAST Plus sensationally low.

The sophisticated setup can quickly be done everywhere and no expensive programming box or computer is needed. So many settings can also be changed simply and easily at the flying field. 

Further options are available with the optional USB2SYS interface and the StudioX software package. MICROBEAST Plus can be kept up to date by using the update functionality and advanced pilot can thus customize the unit specifically to their needs.

The device can be upgraded to ProEdition firmware with AttitudeControl (Bail out rescue function) at any time (subject to a charge).

Features

Servo outputs

• 3 swash plate servos
- Maximum adjustable servo update rate: 200Hz
- Swash plate mixing types: mCCPM, 90°, 120°, 135°, 140°; as well es freely configurable mixer with StudioX, i.e. for swash phasing
• 1 rudder servo 
- Supports mostly all types of servos with 1520µs, 960µs or 760µs
- Maximum adjustable servo update rate: 560Hz
• When using a SingleLine receiver additionally:
- throttle output, auxiliary output for landing gear, position lights or else

Signal inputs

• Standard receiver with single servo output channels
• SingleLine receivers: Spektrum DSM2/DSMX remote satellite, JR RJ01 DMSS remote satellite, Futaba S.Bus, SRXL (JR XBUS, Spektrum SRXL, SUMD, M-Link, BEASTX SRXL, JETI UDI), SPPM
• Sensor board (i. e. for connecting a rpm sensor for internal electric or nitro RPM governor function).

Specifications
Input voltage: 3,5 V - 8,5 V DC (Operation with 2 cell LiPo possible)
Processor: 32 Bit ARM
Sensor: 6-Axis MEMS (Gyro + Accelerometer)
Dimensions: 36 x 25 x 14 mm
Weight (w/o wiring): ca. 11g

Content
• MICROBEAST Plus
• Receiver connection cables
• 3M adhesive pads
• Adjustment tool
• Quick start manual poster
• Plastic quick reference card
• Sticker set


Optional accessories
• USB2SYS Interface for communication with StudioX PC Software (BXA76007)
• BLE2SYS Bluetooth-Interface (BXA76015)

Current Firmware

Additional to the basic functionality as flybarless system and tail gyro* an internal RPM Governor function* for helicopters with electric or combustion drive is included.

* Requires the optional Tail-Gyro Adaptor (BXA76001)
** Requires the optional Brushless Sensor and RPM-Sensor Adaptorcable (BXA76402) for Electro or Governor Sensor for fuel engines (HEGBP001)


158.60€  Inc Tax
MS Composit Bushing insert for 4mm bolts (4x5x12) - 2 pcs. (MS-00013)
MS Composit Bushing inserts for 4mm bolts (4x5x12) - 2 pieces

Use with MS Composit Rapid FBL carbon rotor blades when using 4mm bolts

3.05€  Inc Tax
700 mm/12/5mm Rapid FBL - MS Composit CFC main blades (MS-R90700FBL)
Specification:

Weight: 190g
Width: 64mm
Length: 700mm
Root: 12mm
Hole: 5mm

93.33€  Inc Tax
690 mm/12/5mm Rapid FBL - MS Composit CFC main blades (MS-R90690FBL)
Specification:

Weight: 185g
Width: 64mm
Length: 690mm
Root: 12mm
Hole: 5mm

93.33€  Inc Tax
650 mm/12/5mm Rapid FBL - MS Composit CFC main blades (MS-R55650FBL)
Specification:

Weight: 175g
Width: 64mm
Length: 650mm
Root: 12mm
Hole: 5mm

Use with Goblin Nitro and others,..

93.33€  Inc Tax
620 mm/12/4mm Rapid FBL - MS Composit CFC main blades (MS-R50620FBL)
Specification:

Weight: 130g
Width: 54mm
Length: 620mm
Root: 12mm
Hole: 4mm

80.52€  Inc Tax
550 mm/12/4mm Rapid FBL - MS Composit CFC main blades (MS-R30550FBL)
Specification:

Weight: 115g
Width: 54mm
Length: 550mm
Root: 12mm
Hole: 4mm

75.03€  Inc Tax
420 mm/5/3mm Rapid FBL - MS Composit CFC main blades (MS-R20420FBL)
Specification:

Weight: 50g
Width: 43mm
Length: 420mm
Root: 5mm
Hole: 3mm

Use with: Goblin 420 and others,..

48.19€  Inc Tax
360 mm/5/3mm Rapid FBL - MS Composit CFC main blades (MS-R20360FBL)
Specification:

Weight: 40g
Width: 43mm
Length: 360mm
Root: 5mm
Hole: 3mm

46.97€  Inc Tax
380 mm/5/3mm Rapid FBL - MS Composit CFC main blades (MS-R20380FBL)
Specification:

Weight: 45g
Width: 43mm
Length: 380mm
Root: 5mm
Hole: 3mm

Use with: Goblin 380 and others,..

46.97€  Inc Tax
325 mm/4.5/3mm Rapid FBL - MS Composit CFC main blades (MS-R20325FBL)
Specification:

Weight: 23g
Width: 33mm
Length: 325mm
Root: 4,5mm
Hole: 3mm

Use with: Mini Titan, T-Rex 450/V2/V2PRO, Blade 400 and others,..

32.33€  Inc Tax
60cm/12/4mm Rapid FBL - MS Composit CFC main blades (MS-R50600FBL)
Specification:

Weight: 125g
Width: 54mm
Length: 600mm
Root: 12mm
Hole: 4mm

80.52€  Inc Tax
KST Servo Combo 3x X20-2208 v2 + 1x X20-1035 v2 (8.4V) (KSTX20-V2COMBO)

3x KST X20-2208 v2.0 HV Digital Brushless Servo Motor (titanium gear)

The KST X20-2208 v2 HV Brushless servo offers a significantly longer life-span, with a superior power to weight ratio. The servo features a nicely machined aluminium case and offerers high voltage capability. It can be run directly from a 2S LiPo battery without the need for a separate voltage regulator.

Another huge benefit of X20 servos is the all new design of a circuit board that generates no counter EMF in any working conditions. It eliminates any possible interference with your flybarless system or receiver unit thus as a result giving you only the best in-flight performance.

Due to the extreme reliability and performance these servos are used in film and motion picture industry as well as in robotics, drones, UAV, UAS, academic researches, and other highly demanding applications such as use in various military applications,..

In addition to the four heavy duty plastic servo arms it comes with the two anodised aluminium servo horns with M2 threaded holes and with the one gear-saver insert.

Technical Details:
Voltage (max.) [V]: 8.4

Torque [kg/cm]@6.0V: 18.0
Torque [kg/cm]@7.4V: 22.0
Torque [kg/cm]@8.4V: 25.0

Speed [s/60°]@6.0V: 0.09
Speed [s/60°]@7.4V: 0.08
Speed [s/60°]@8.4V: 0.07

Width [mm]: 20.0
Length [mm]: 40.5
Height [mm]: 38.0

Weight [g]: 72.0

Motor typ: Brushless
Working Frequency: 1520us/333Hz, 900us-2100us
Resolution: <2us
Gear: Titanium Alloy
Ball Bearing: 2BB
Output shaft type: 25T
Servo size: Standard
Waterproof: No
Manufacturer: KST


Suitable for use as a swashplate servo on 550-800 size RC helicopters;

Such as Goblin 570, 630, 650, 700, 770, T-REX 550, 600, 700, Mikado LOGO 550, 600, 700, 800, MSH PROTOS 700 MAX, SOXOS 550, 600, 700 and similar,..


1x KST X20-1035 v2.0 HV Digital Brushless Servo Motor (titanium gear)

The KST X20-1035 v2 HV Brushless servo offers a significantly longer life-span, with a superior power to weight ratio. The servo features a nicely machined aluminium case and offerers high voltage capability. It can be run directly from a 2S LiPo battery without the need for a separate voltage regulator.

Another huge benefit of X20 servos is the all new design of a circuit board that generates no counter EMF in any working conditions. It eliminates any possible interference with your flybarless system or receiver unit thus as a result giving you only the best in-flight performance.

Due to the extreme reliability and performance these servos are used in film and motion picture industry as well as in robotics, drones, UAV, UAS, academic researches, and other highly demanding applications such as use in various military applications,..

In addition to the four heavy duty plastic servo arms it comes with the two anodised aluminium servo horns with M2 threaded holes and with the one gear-saver insert.

Technical Details:
Voltage (max.) [V]: 8.4

Torque [kg/cm]@6.0V: 8.5
Torque [kg/cm]@7.4V: 10.3
Torque [kg/cm]@8.4V: 12.0

Speed [s/60°]@6.0V: 0.04
Speed [s/60°]@7.4V: 0.035
Speed [s/60°]@8.4V: 0.03

Width [mm]: 20.0
Length [mm]: 40.5
Height [mm]: 38.0

Weight [g]: 72.0

Motor typ: Brushless
Working Frequency: 760us/560Hz, 450us-1050us
Resolution: <2us
Gear: Titanium Alloy
Ball Bearing: 2BB
Output shaft type: 25T
Servo size: Standard
Waterproof: No
Manufacturer: KST


Suitable for use as a tail servo on 550-800 size RC helicopters;

Such as Goblin 570, 630, 650, 700, 770, T-REX 550, 600, 700, Mikado LOGO 550, 600, 700, 800, MSH PROTOS 700 MAX, SOXOS 550, 600, 700 and similar,..

598.41€  Inc Tax
Per Page      1 - 14 of 14
  • 1