Search

Search Criteria

 
 
 
 

Products meeting the search criteria

Sort By:  
FOXY G3 Brushless Motor C2814-1000kv (3BL2665)
FOXY G3 C2814-1000

FOXY brushless motors are 14-pole rotary casing electric motors with excellent electrical properties featuring a very sophisticated design and high-end manufacturing. Hardened steel shafts and high-quality bearings ensure a long service life, while the quality of materials used to make the stator on the rotor also guarantees excellent performance at a high efficiency. They are low-speed, high-torque engines that handle large diameter propellers and pitches without the need for gearboxes.

Engine marking system: CxxYY / zzzz
C - brushless motor ("outrunner", "circular")
xx - stator diameter in mm
YY - stator length in mm
zzzz - revolutions per volt (rpm/V), "KV"

The engine set includes:
FOXY G3 C2814-1000 brushless motor with 3.5mm gold-plated connectors, rear and front mounting kit and an instruction manual.

Engine Mounting:
The FOXY G3 C2814-1000 is designed for both front and rear mounting. For front mounting at the front of the motor use at least two (opposite) or four bolts. The rear mounting kit (mounting cross, tail propeller) is also supplied with the engine.

The marking according to the engine dimensions: C3536; The marking according to the stator dimensions: C2814

Specifications:
No. of (LiXX) cells: 3-4
Motor Kv: 1000 rpm/V
Max power (30s/4S Lipo): 370W
No-load current (3S): 1.3A
Max peak current (30s): 38A
Diameter: 35mm
Length: 38.7mm
Shaft diameter: 4mm
Weight: 115g
Magnet poles: 14
Motor timing: 15-25deg
Regulator: 40-45A

Application:
Gliders up to: 1700g
Trainers up to: 1600g
Acro planes up to: 1330g
3D airplanes up to: 1050g

Recommended propellers:
3S: 12X6”
4S: 10X5”

27.45€  Inc Tax
Graupner ULTRA 2806 2300KV Brushless Motor CW (S7049)
Graupner ULTRA Race copter MOTOR 2300kv CW

Specification:
Operating Voltage Range: 7.4-11.1V (2-3S)
Number of poles: 14
Shaft Diameter: 5mm
Case Diameter: 28mm
Case Length: 18.7mm
Kv (RPM/V): 2300
Weight (inc. spinner and 2mm connectors): 33.5g

9.76€  Inc Tax
FOXY G3 Brushless Motor C2206-1500kv (3BL2610)
FOXY G3 C2206-1500

FOXY brushless motors are 14-pole rotary casing electric motors with excellent electrical properties featuring a very sophisticated design and high-end manufacturing. Hardened steel shafts and high-quality bearings ensure a long service life, while the quality of materials used to make the stator on the rotor also guarantees excellent performance at a high efficiency. They are low-speed, high-torque engines that handle large diameter propellers and pitches without the need for gearboxes.

Engine marking system: CxxYY / zzzz
C - brushless motor ("outrunner", "circular")
xx - stator diameter in mm
YY - stator length in mm
zzzz - revolutions per volt (rpm/V), "KV"

FOXY G3 C2206-1500 is a miniature brushless motor designed to drive small models with a flight weight of up to 300 g, powered by a 2 or 3-cell Li-po battery. With this motor you can successfully "electrify" rubber bands from Guillow's or Dumas kits with a span of up to approx. 1200 mm, it is also excellent for park-flyers and indoor aerobatic models.

Engine mounting:
The FOXY G3 C2206-1500 is designed for rear mounting with a propeller mounted using a rubber band. Use at least two (opposite) or four M2 screws for mounting. The fastening cross is part of the engine.

Engine set includes:
FOXY G3 C2206-1500 engine with cables and instruction manual.

The marking according to the engine dimensions: C2824; The marking according to the stator dimensions: C2206

Specifications:
No. of (LiXX) cells: 2-3
Motor Kv: 1500 rpm/V
Max power (30s/3S Lipo): 100W
No-load current (2S): 0.4A
Max peak current (30s): 12A
Diameter: 27.8mm
Length: 26mm
Shaft diameter: 3.175mm
Weight: 42g
Magnet poles: 14
Motor timing: 15-25deg
Regulator: 15-20A

Application:
Gliders up to: 300g
Trainers up to: 280g
Acro planes up to: 250g
3D airplanes up to: 200g

Recommended propellers:
2S: 9X5”
3S: 7X3,5”

17.69€  Inc Tax
FOXY G3 Brushless Motor C2216-850kv (3BL2650)
FOXY G3 C2816-850

FOXY brushless motors are 14-pole rotary casing electric motors with excellent electrical properties featuring a very sophisticated design and high-end manufacturing. Hardened steel shafts and high-quality bearings ensure a long service life, while the quality of materials used to make the stator on the rotor also guarantees excellent performance at a high efficiency. They are low-speed, high-torque engines that handle large diameter propellers and pitches without the need for gearboxes.

Engine marking system: CxxYY / zzzz
C - brushless motor ("outrunner", "circular")
xx - stator diameter in mm
YY - stator length in mm
zzzz - revolutions per volt (rpm/V), "KV"

The engine set includes:
FOXY G3 C2816-850 brushless motor with 3.5mm gold-plated connectors, rear and front mounting kit and an instruction manual.

Engine Mounting:
The FOXY G3 C2816-850 is designed for both front and rear mounting. For front mounting at the front of the motor use at least two (opposite) or four bolts. The rear mounting kit (mounting cross, tail propeller) is also supplied with the engine.

The marking according to the engine dimensions: C2836; The marking according to the stator dimensions: C2216

Specifications:
No. of (LiXX) cells: 2-4
Motor Kv: 850 rpm/V
Max power (30s/4S Lipo): 200W
No-load current (2S): 0.8A
Max peak current (30s): 18A
Diameter: 27.8mm
Length: 34mm
Shaft diameter: 4mm
Weight: 76g
Magnet poles: 14
Motor timing: 15-25deg
Regulator: 30-35A

Application:
Gliders up to: 1050g
Trainers up to: 900g
Acro planes up to: 800g
3D airplanes up to: 600g

Recommended propellers:
3S: 11X5”
4S: 9X5”

23.79€  Inc Tax
Graupner Motor ESC Prop Set A (CCW) (GRFT4523)
Graupner ULTRA MOTOR 2804 2300kv CCW
Graupner Ultra Control BlHeli 20A 7.2-17.4V SBEC
Propeller Graupner Sport Prop 5x3 (2 pieces)

Motor specification:
Operating Voltage Range: 2-4S
Number of poles: 14
Shaft Diameter: 5mm
Case Diameter: 28mm
Kv (RPM/V): 2300
Recommended propeller: 5-6"


29.89€  Inc Tax
Raytronic C50 DC Balance Charger - 500W / (2x250W) (3EC1050)
Small two-channel charger Raytronic C50 2×250W designed to offer a smart charging with high power and simple and intuitive operation.
Raytronic C50 allows to charge and discharge common types of batteries (NiCD, NiMH, LiPo, LiFe, LiHV, Li-Ion, Pb) and is also equipped with 6-channel balance port for safe charging of lithium batteries.
The charger has a coloured LCD display and programming button and dial.

Features

Program for new types of "High Voltage" lithium (LiHV) batteries with an output charging voltage up to 4.25V
Powerful balance with current up to 800mA
Optional synchronised operation of both channels for charging a single battery with power up to 500W
Optional recuperative discharging with high power when charging from a car battery (energy consumed by the charger is used to charge the car battery powering the charger again)
Adjustable output voltage for charging and discharging lithium batteries.
Programs for charging intelligent batteries for popular DJI drones.

Parameters overview

Input: 7.28V DC (XT60 connector)
For charging/discharging 1–16cell NiCd/NiMH, 1–6cell Li-Ion/LiPo/LiFe/LiHV or 2–20V Pb batteries
Adjustable charging current (0.1–15.0 A) for each channel
Adjustable discharging current (0.1–3.0 A), or recuperative discharging (0.1–15.0 A) for each channel
Charging power output up to 2x250W / 1x500W for synchronous charging
Discharging power output up to 2x12W, up to 2x250W for recuperative discharging
Charging finishing via automatic "Delta-Peak" for NiCd and NiMH batteries
Lithium and Pb batteries are charged via the "constant current/constant voltage" method
Adjustable sensitivity of "Delta-Peak" detection for NiCd/NiMH batteries
Adjustable output voltage for charging and discharging the lithium batteries
Repeated cyclic charging/discharging or discharging/charging operation for NiCd and NiMH batteries, up to 12 cycles
3 lithium battery modes - charging, discharging and charging/discharging for storing (all of this with a balance port or without it).
Finishing of charging after reaching a set time, temperature or supplied charge
Memory for 5 charging/discharging programs
Internal resistance measuring for individual cells
Stabilised DC current source (0.1–15.0 A) with an adjustable voltage limit
Charging programs for intelligent DJI Mavic/Phantom/Inspire batteries
Ports for temperature sensor (sold separately)
USB input (5V / 2.1A) for smartphone/tablets/other charging
Simple firmware update via USB port
Backlit coloured LCD display with simple and well-arranged menu, parameter overview during charging/discharging
Programming button and dial for simple and intuitive setting and controlling the charger
Warning messages for higher safety - incorrect input voltage, incorrect connection, unsuitable battery or its condition, incorrect polarity etc.,..
Incorrect polarity and on-input short-circuit protection
Forced-cooling fan
Compact plastic body with very small dimensions

Both channels are equipped with an output XT60 ports and universal ports for service connectors JST-XH, allowing direct connection of battery power cables and service connectors JST-XH for 2–6S packs. If you are using a pack with XT60 and JST-XH connects (no additional cables needed).

Note: charger uses output voltage of 2.4V/cell for Pb battery charging. It is suitable for charging typical lead-acid batteries (car batteries) and gel batteries with reversible valve.
NOT SUITABLE for charging gas-tight gel batteries charged with a maximum of 2.3V/cell.

Package contains:
Raytronic C50 Charger
USB Cable
Screen Protector
User Manual

69.54€  Inc Tax
FOXY G3 Brushless Motor C2208-1000kv (3BL2615)
FOXY G3 C2208-1000

FOXY brushless motors are 14-pole rotary casing electric motors with excellent electrical properties featuring a very sophisticated design and high-end manufacturing. Hardened steel shafts and high-quality bearings ensure a long service life, while the quality of materials used to make the stator on the rotor also guarantees excellent performance at a high efficiency. They are low-speed, high-torque engines that handle large diameter propellers and pitches without the need for gearboxes.

Engine marking system: CxxYY / zzzz
C - brushless motor ("outrunner", "circular")
xx - stator diameter in mm
YY - stator length in mm
zzzz - revolutions per volt (rpm/V), "KV"

The engine set includes:
FOXY G3 C2208-1000 brushless motor with 3.5mm gold-plated connectors, rear and front mounting kit and an instruction manual.

Engine Mounting:
The FOXY G3 C2208-1000 is designed for both front and rear mounting. For front mounting at the front of the motor use at least two (opposite) or four bolts. The rear mounting kit (mounting cross, tail propeller) is also supplied with the engine.

The marking according to the engine dimensions: C2826; The marking according to the stator dimensions: C2208

Specifications:
No. of (LiXX) cells: 2-3
Motor Kv: 1000 rpm/V
Max power (30s/3S Lipo): 120W
No-load current (2S): 0.4A
Max peak current (30s): 14A
Diameter: 27.8mm
Length: 28mm
Shaft diameter: 3.175mm
Weight: 51g
Magnet poles: 14
Motor timing: 15-25deg
Regulator: 18-20A

Application:
Gliders up to: 450g
Trainers up to: 450g
Acro planes up to: 400g
3D airplanes up to: 330g

Recommended propellers:
2S: 10X5”
3S: 9X5”

19.52€  Inc Tax
FOXY G3 Brushless Motor C3520-880kv (3BL2715)
FOXY G3 C3520-880

FOXY brushless motors are 14-pole rotary casing electric motors with excellent electrical properties featuring a very sophisticated design and high-end manufacturing. Hardened steel shafts and high-quality bearings ensure a long service life, while the quality of materials used to make the stator on the rotor also guarantees excellent performance at a high efficiency. They are low-speed, high-torque engines that handle large diameter propellers and pitches without the need for gearboxes.

Engine marking system: CxxYY / zzzz
C - brushless motor ("outrunner", "circular")
xx - stator diameter in mm
YY - stator length in mm
zzzz - revolutions per volt (rpm/V), "KV"

The engine set includes:
FOXY G3 C3520-880 brushless motor with 4mm gold-plated connectors, rear and front mounting kit and an instruction manual.

Engine Mounting:
The FOXY G3 C3520-880 is designed for both front and rear mounting. For front mounting at the front of the motor use at least two (opposite) or four bolts. The rear mounting kit (mounting cross, tail propeller) is also supplied with the engine.

The marking according to the engine dimensions: C4050; The marking according to the stator dimensions: C3520

Specifications:
No. of (LiXX) cells: 3-5
Motor Kv: 880 rpm/V
Max power (30s/5S Lipo): 880W
No-load current (4S): 4.5A
Max peak current (30s): 63A
Diameter: 42.8mm
Length: 50mm
Shaft diameter: 5mm
Weight: 230g
Magnet poles: 14
Motor timing: 15-25deg
Regulator: 70-80A

Application:
Gliders up to: 3000g
Trainers up to: 3000g
Acro planes up to: 2500g
3D airplanes up to: 1800g

Recommended propellers:
3S: 14X7-8”
4S: 13X6”
5S: 11X6-7”

39.65€  Inc Tax
FOXY G3 Brushless Motor C2826-750kv (3BL2700)
FOXY G3 C2826-750

FOXY brushless motors are 14-pole rotary casing electric motors with excellent electrical properties featuring a very sophisticated design and high-end manufacturing. Hardened steel shafts and high-quality bearings ensure a long service life, while the quality of materials used to make the stator on the rotor also guarantees excellent performance at a high efficiency. They are low-speed, high-torque engines that handle large diameter propellers and pitches without the need for gearboxes.

Engine marking system: CxxYY / zzzz
C - brushless motor ("outrunner", "circular")
xx - stator diameter in mm
YY - stator length in mm
zzzz - revolutions per volt (rpm/V), "KV"

The engine set includes:
FOXY G3 C2826-750 brushless motor with 3.5mm gold-plated connectors, rear and front mounting kit and an instruction manual.

Engine Mounting:
The FOXY G3 C2826-750 is designed for both front and rear mounting. For front mounting at the front of the motor use at least two (opposite) or four bolts. The rear mounting kit (mounting cross, tail propeller) is also supplied with the engine.

The marking according to the engine dimensions: C3548; The marking according to the stator dimensions: C2826

Specifications:
No. of (LiXX) cells: 3-5
Motor Kv: 750 rpm/V
Max power (30s/5S Lipo): 580W
No-load current (3S): 2.1A
Max peak current (30s): 42A
Diameter: 35mm
Length: 50.7mm
Shaft diameter: 5mm
Weight: 172g
Magnet poles: 14
Motor timing: 15-25deg
Regulator: 50-60A

Application:
Gliders up to: 2700g
Trainers up to: 2600g
Acro planes up to: 2300g
3D airplanes up to: 1500g

Recommended propellers:
4S: 13X6,5”
5S: 11X6”

34.16€  Inc Tax
FOXY G3 Brushless Motor C2826-500kv (3BL2695)
FOXY G3 C2826-500

FOXY brushless motors are 14-pole rotary casing electric motors with excellent electrical properties featuring a very sophisticated design and high-end manufacturing. Hardened steel shafts and high-quality bearings ensure a long service life, while the quality of materials used to make the stator on the rotor also guarantees excellent performance at a high efficiency. They are low-speed, high-torque engines that handle large diameter propellers and pitches without the need for gearboxes.

Engine marking system: CxxYY / zzzz
C - brushless motor ("outrunner", "circular")
xx - stator diameter in mm
YY - stator length in mm
zzzz - revolutions per volt (rpm/V), "KV"

The engine set includes:
FOXY G3 C2826-500 brushless motor with 3.5mm gold-plated connectors, rear and front mounting kit and an instruction manual.

Engine Mounting:
The FOXY G3 C2826-500 is designed for both front and rear mounting. For front mounting at the front of the motor use at least two (opposite) or four bolts. The rear mounting kit (mounting cross, tail propeller) is also supplied with the engine.

The marking according to the engine dimensions: C3548; The marking according to the stator dimensions: C2826

Specifications:
No. of (LiXX) cells: 3-6
Motor Kv: 500 rpm/V
Max power (30s/6S Lipo): 600W
No-load current (3S): 1.6A
Max peak current (30s): 36A
Diameter: 35mm
Length: 50.7mm
Shaft diameter: 5mm
Weight: 172g
Magnet poles: 14
Motor timing: 15-25deg
Regulator: 45-50A

Application:
Gliders up to: 2800g
Trainers up to: 2700g
Acro planes up to: 2300g
3D airplanes up to: 1500g

Recommended propellers:
6S: 13X6,5”

34.16€  Inc Tax
Graupner Motor ESC Prop Set B (CCW) (GRFT4524)
Graupner ULTRA MOTOR 2812 1200kv CCW
Graupner Ultra Control BlHeli 35A 7.2-17.4V SBEC
Propeller Graupner Sport Prop 8x4.5 (2 pieces)

Motor pecification:
Operating Voltage Range: 2-6S
Number of poles: 14
Shaft Diameter: 5mm
Case Diameter: 28mm
Case Length: 24mm
Overall Length: 43mm
Kv (RPM/V): 1200
Recommended propeller: 8-10"
Weight (inc. spinner and 2mm connectors): 53g

31.72€  Inc Tax
Receiver Battery Box 4xAA Rx (4.8V) (8GR3094)
Receiver Battery Box for loose NiMh, NiCd cells

4xAA (4.8V)

For radio controlled cars, buggies and other models requiring 4AA (4.8V) power supply.

3.66€  Inc Tax
Kyosho Radio Controlled EP 4WD Car Fazer Mk2 Chevy Camaro Z28 1969 1:10 Readyset (electric) (K.34418T1B)
Now driving R/C is even more fun
Newly designed FZ02 chassis with realistic racing car body

For the pure enjoyment of R/C car driving, the combination of a beautifully reproduced car body with the FAZER series chassis can’t be beaten. Kyosho has taken its standard touring car chassis and given it a full model makeover that has evolved performance to a new level. A simplified design with fewer parts has improved maintenance efficiency and reduced weight while core strength and rigidity has been increased through new materials and ribbing and stiffeners on front and rear. In addition, the symmetrical chassis design synergizes excellent front-rear balance through the suspension with responsive control, irrespective of power source. Featuring slipper clutch, front & rear gear differentials, oil shocks and full ball bearing specs, the high durability and impact resistance allows drivers to unleash the full potential of the chassis. Brake disc wheel hubs with two different offsets (0mm, +5mm) provide compatibility with 190mm and 200mm width body styles and allows the wheelbase to be adjusted to 260mm by replacing some parts (sold separately) for compatibility with other 1/10 scale body styles, in addition the body included. The Readyset package comes fully assembled and includes everything except charger and battery for the chassis, and batteries for the transmitter.

  • “Ultra Scale Body” replicates the fine details of the actual body of the car. Kyosho took a step further in scale realism.
  • New design shaft drive full-time 4WD touring chassis(FZ02).
  • Factory-assembled Readyset package only requires 4 x AA alkaline batteries for the transmitter, and battery with charger for the chassis.
  • Equipped with 2-bevel grease-filled gear diffs on front and rear.
  • Large size dog bones and cup joints realize superior reliability and durability.
  • Belt mounting battery compartment allows various battery types to be used.
  • Full ball bearings that reduce drive loss equipped throughout the drive system.
  • Features KS202W waterproof steering servo.
  • Includes completely finished body with color scheme and decals applied.
  • Sealed differential and transmission deliver reliable performance, even on dusty parking lot surfaces.
  • Performance can be further enhanced by installing various optional parts.

TECHNICAL DATA
Length: 507mm
Width: 195mm (Body width:210mm)
Wheelbase: 260mm
Tread (F/R): F:167mm/R:167mm
Tires (F/R): F:φ64×27.7mm/R:φ64×27.7mm
Gear Ratio: 6.54:1
Weight: 1650g (approx.)
R/C system: Syncro KT-231P+
Motor: G14L

Kit Contents
Completed chassis with R/C radio installed
Factory assembled body complete with color scheme
Syncro KT-231P+ transmitter
Installed 60A waterproof electronic speed controller (forward/brake/reverse)
+5mm off-set wheel hub (for 200mm width chassis), M4 x 22 wheel screw
Hexagonal wrench
Spanner

Required for Operation
4 x AA batteries for transmitter
Battery for chassis (recommended: 7.2V Ni-MH battery)
Charger for battery for chassis
Tools

Radio controlled on-road  RC car model for onroad racing and bashing.

269.62€  Inc Tax
FOXY G3 Brushless Motor C2808-1500kv (3BL2660)
FOXY G3 C2808-1500

FOXY brushless motors are 14-pole rotary casing electric motors with excellent electrical properties featuring a very sophisticated design and high-end manufacturing. Hardened steel shafts and high-quality bearings ensure a long service life, while the quality of materials used to make the stator on the rotor also guarantees excellent performance at a high efficiency. They are low-speed, high-torque engines that handle large diameter propellers and pitches without the need for gearboxes.

Engine marking system: CxxYY / zzzz
C - brushless motor ("outrunner", "circular")
xx - stator diameter in mm
YY - stator length in mm
zzzz - revolutions per volt (rpm/V), "KV"

The engine set includes:
FOXY G3 C2808-1500 brushless motor with 3.5mm gold-plated connectors, rear and front mounting kit and an instruction manual.

Engine Mounting:
The FOXY G3 C2808-1500 is designed for both front and rear mounting. For front mounting at the front of the motor use at least two (opposite) or four bolts. The rear mounting kit (mounting cross, tail propeller) is also supplied with the engine.

The marking according to the engine dimensions: C3530; The marking according to the stator dimensions: C2808

Specifications:
No. of (LiXX) cells: 2-4
Motor Kv: 1500 rpm/V
Max power (30s/4S Lipo): 370W
No-load current (2S): 1.7A
Max peak current (30s): 33A
Diameter: 35mm
Length: 30mm
Shaft diameter: 4mm
Weight: 90g
Magnet poles: 14
Motor timing: 15-25deg
Regulator: 40-45A

Application:
Gliders up to: 950g
Trainers up to: 900g
Acro planes up to: 800g
3D airplanes up to: 700g

Recommended propellers:
3S: 9X5”
4S: 7X6”

26.23€  Inc Tax
FOXY G3 Brushless Motor C2820-950kv (3BL2690)
FOXY G3 C2820-950

FOXY brushless motors are 14-pole rotary casing electric motors with excellent electrical properties featuring a very sophisticated design and high-end manufacturing. Hardened steel shafts and high-quality bearings ensure a long service life, while the quality of materials used to make the stator on the rotor also guarantees excellent performance at a high efficiency. They are low-speed, high-torque engines that handle large diameter propellers and pitches without the need for gearboxes.

Engine marking system: CxxYY / zzzz
C - brushless motor ("outrunner", "circular")
xx - stator diameter in mm
YY - stator length in mm
zzzz - revolutions per volt (rpm/V), "KV"

The engine set includes:
FOXY G3 C2820-950 brushless motor with 3.5mm gold-plated connectors, rear and front mounting kit and an instruction manual.

Engine Mounting:
The FOXY G3 C2820-950 is designed for both front and rear mounting. For front mounting at the front of the motor use at least two (opposite) or four bolts. The rear mounting kit (mounting cross, tail propeller) is also supplied with the engine.

The marking according to the engine dimensions: C3542; The marking according to the stator dimensions: C2820

Specifications:
No. of (LiXX) cells: 3-4
Motor Kv: 950 rpm/V
Max power (30s/4S Lipo): 500W
No-load current (3S): 1.7A
Max peak current (30s): 45A
Diameter: 35mm
Length: 44.7mm
Shaft diameter: 4mm
Weight: 142g
Magnet poles: 14
Motor timing: 15-25deg
Regulator: 50-60A

Application:
Gliders up to: 2400g
Trainers up to: 2300g
Acro planes up to: 2000g
3D airplanes up to: 1500g

Recommended propellers:
3S: 13X6,5”
4S: 11X5,5”

29.89€  Inc Tax
Graupner ULTRA 2806 2300KV Brushless Motor CCW (S7050)
Graupner ULTRA Race copter MOTOR 2300kv CCW

Specification:
Operating Voltage Range: 7.4-11.1V (2-3S)
Number of poles: 14
Shaft Diameter: 5mm
Case Diameter: 28mm
Case Length: 18.7mm
Kv (RPM/V): 2300
Weight (inc. spinner and 2mm connectors): 33.5g

9.76€  Inc Tax
S10 Blast TC 2 Clubracer Non-RTR (no wheels and body) - 1/10 4WD Electric Touring Car (L120202)
S10 Blast TC 2 Clubracer Non-RTR no wheels and body - 1/10 4WD Electric Radio Controlled (RC) Touring Car

The perfect basis for TC racing!
The S10 Blast TC 2 Clubracer features a specially developed 4WD chassis concept that fulfils all demands on a 1/10 4WD touring car. From the suspension to the drive, everything has been precisely adapted. Depending on the track layout, the suspension geometry can be completely adjusted.

The S10 Blast TC 2 Clubracer is a basis model ready for competition. It comes as a pre-mounted chassis without body shell, electronics and tyres.

Features
Splash-proof receiver box
Easy to understand user manual including beginner and tuning guide
Blue anodized aluminum suspension arm holder front and rear
Blue anodized aluminum motor mount
Reinforced front suspension
Low maintenance and efficient universal drivetrain
Left/right turnbuckles in front and rear
Fully adjustable onroad race suspension for perfect handling performance
Steel differentials front and rear
Swaybars front and rear for improved cornering
4 "Big Bore" oil filled shocks for perfect roadability on every surface
CVD driveshafts front for constant power transmission and minimized losses
Completely built with ball bearings
Completely sealed drive train protects the gears against stones, dirt and dust
Completely mounted chassis
All spare parts available

Technical Data
Length 414mm
Width 190mm
Height 120mm
Wheelbase 262mm
Drive system 4WD shaft drive
Gearing 48dp
Diameter of wheel 65mm
Width of wheel 24mm

89.06€  Inc Tax
Graupner Motor ESC Prop Set F (CCW) (GRFT4526)
Graupner ULTRA MOTOR 2806 1900kv CCW
Graupner Ultra Control BlHeli 20A 7.2-17.4V SBEC
Propeller Graupner Sport Prop 6x3 (2 pieces)

Motor pecification:
Operating Voltage Range: 2-4S
Number of poles: 14
Shaft Diameter: 5mm
Case Diameter: 28mm
Case Length: 18mm
Overall Length: 37mm
Kv (RPM/V): 1900
Recommended propeller: 5-6"
Weight (inc. spinner and 2mm connectors): 34g

28.06€  Inc Tax
Kyosho Radio Controlled EP 4WD Car Fazer Mk2 2020 Mercedes AMG GT3 1:10 Readyset (electric) (K.34424B)
Kyosho Radio Controlled Electric Powered 4WD Car Fazer Mk2 2020 Mercedes-AMG GT3 1:10 Readyset

Now driving R/C is even more fun
Newly designed FZ02 chassis with realistic racing car body

For the pure enjoyment of R/C car driving, the combination of a beautifully reproduced car body with the FAZER series chassis can’t be beaten. Kyosho has taken its standard touring car chassis and given it a full model makeover that has evolved performance to a new level. A simplified design with fewer parts has improved maintenance efficiency and reduced weight while core strength and rigidity has been increased through new materials and ribbing and stiffeners on front and rear. In addition, the symmetrical chassis design synergizes excellent front-rear balance through the suspension with responsive control, irrespective of power source. Featuring slipper clutch, front & rear gear differentials, oil shocks and full ball bearing specs, the high durability and impact resistance allows drivers to unleash the full potential of the chassis. Brake disc wheel hubs with two different offsets (0mm, +5mm) provide compatibility with 190mm and 200mm width body styles and allows the wheelbase to be adjusted to 274mm by replacing some parts (sold separately) for compatibility with other 1/10 scale body styles, in addition the body included. The Readyset package comes fully assembled and includes everything except charger and battery for the chassis, and batteries for the transmitter.

●New design shaft drive full-time 4WD touring chassis(FZ02).
●Factory-assembled Readyset package only requires 4 x AA alkaline batteries for the transmitter, and battery with charger for the chassis.
●Equipped with 2-bevel grease-filled gear diffs on front and rear.
●Large size dog bones and cup joints realize superior reliability and durability.
●Belt mounting battery compartment allows various battery types to be used.
●Full ball bearings that reduce drive loss equipped throughout the drive system.
●Features KS202W waterproof steering servo.
●Includes completely finished body with color scheme and decals applied.
●Sealed differential and transmission deliver reliable performance, even on dusty parking lot surfaces.
●Performance can be further enhanced by installing various optional parts.
●Equipped with Front and Rear light buckets compatible with optional LED Light unit which is sold separately.

Technical data:
■Length 464mm
■Width 207mm
■Wheelbase 260mm
■Tread (F/R) F:174mm/R:174mm
■Tires (F/R) F:φ66×25mm/R:φ66×25mm
■Gear Ratio 6.5:1
■Weight 1650g (approx.)
■R/C system Syncro KT-231P+
■Motor G14L

Kit Contents:
●Completed chassis with R/C radio installed
●Factory assembled body complete with color scheme
●Syncro KT-231P+ transmitter
●Installed 60A waterproof electronic speed controller (forward/brake/reverse)
●Hexagonal wrench
●Spanner

Required for Operation:
●4 x AA batteries for transmitter
●Battery for chassis (recommended: 7.2V Ni-MH battery)
●Charger for battery for chassis
●Tools

249.49€  Inc Tax
Kyosho Radio Controlled EP 4WD Car Fazer Mk2 Dodge Challenger SRT Hellcat 1:10 Readyset (electric) (K.34415T1B)
Kyosho Radio Controlled Electric Powered 4WD Car Fazer Mk2 Dodge Challenger SRT Hellcat 1:10 Readyset

Now driving R/C is even more fun
Newly designed FZ02 chassis with realistic racing car body

For the pure enjoyment of R/C car driving, the combination of a beautifully reproduced car body with the FAZER series chassis can’t be beaten. Kyosho has taken its standard touring car chassis and given it a full model makeover that has evolved performance to a new level. A simplified design with fewer parts has improved maintenance efficiency and reduced weight while core strength and rigidity has been increased through new materials and ribbing and stiffeners on front and rear. In addition, the symmetrical chassis design synergizes excellent front-rear balance through the suspension with responsive control, irrespective of power source. Featuring slipper clutch, front & rear gear differentials, oil shocks and full ball bearing specs, the high durability and impact resistance allows drivers to unleash the full potential of the chassis. Brake disc wheel hubs with two different offsets (0mm, +5mm) provide compatibility with 190mm and 200mm width body styles and allows the wheelbase to be adjusted to 274mm by replacing some parts (sold separately) for compatibility with other 1/10 scale body styles, in addition the body included. The Readyset package comes fully assembled and includes everything except charger and battery for the chassis, and batteries for the transmitter.

●New design shaft drive full-time 4WD touring chassis(FZ02).
●Factory-assembled Readyset package only requires 4 x AA alkaline batteries for the transmitter, and battery with charger for the chassis.
●Equipped with 2-bevel grease-filled gear diffs on front and rear.
●Large size dog bones and cup joints realize superior reliability and durability.
●Belt mounting battery compartment allows various battery types to be used.
●Full ball bearings that reduce drive loss equipped throughout the drive system.
●Features KS202W waterproof steering servo.
●Includes completely finished body with color scheme and decals applied.
●Sealed differential and transmission deliver reliable performance, even on dusty parking lot surfaces.
●Performance can be further enhanced by installing various optional parts.

Technical data:
■Length 486mm
■Width 200mm
■Wheelbase 274mm
■Tread (F/R) F:174mm/R:174mm
■Tires (F/R) F:φ66×25mm/R:φ66×25mm
■Gear Ratio 6.5:1
■Weight 1650g (approx.)
■R/C system Syncro KT-231P+
■Motor G14L

Kit Contents:
●Completed chassis with R/C radio installed
●Factory assembled body complete with color scheme
●Syncro KT-231P+ transmitter
●Installed 60A waterproof electronic speed controller (forward/brake/reverse)
●Hexagonal wrench
●Spanner

Required for Operation:
●4 x AA batteries for transmitter
●Battery for chassis (recommended: 7.2V Ni-MH battery)
●Charger for battery for chassis
●Tools

249.49€  Inc Tax
Kyosho Radio Controlled EP 4WD Car Fazer Mk2 Alpine GT4 1:10 Readyset (electric) (K.34423B)
Kyosho Radio Controlled Electric Powered 4WD Car Fazer Mk2 Alpine GT4 1:10 Readyset

Now driving R/C is even more fun
Newly designed FZ02 chassis with realistic racing car body

For the pure enjoyment of R/C car driving, the combination of a beautifully reproduced car body with the FAZER series chassis can’t be beaten. Kyosho has taken its standard touring car chassis and given it a full model makeover that has evolved performance to a new level. A simplified design with fewer parts has improved maintenance efficiency and reduced weight while core strength and rigidity has been increased through new materials and ribbing and stiffeners on front and rear. In addition, the symmetrical chassis design synergizes excellent front-rear balance through the suspension with responsive control, irrespective of power source. Featuring slipper clutch, front & rear gear differentials, oil shocks and full ball bearing specs, the high durability and impact resistance allows drivers to unleash the full potential of the chassis. Brake disc wheel hubs with two different offsets (0mm, +5mm) provide compatibility with 190mm and 200mm width body styles and allows the wheelbase to be adjusted to 274mm by replacing some parts (sold separately) for compatibility with other 1/10 scale body styles, in addition the body included. The Readyset package comes fully assembled and includes everything except charger and battery for the chassis, and batteries for the transmitter.

●New design shaft drive full-time 4WD touring chassis(FZ02).
●Factory-assembled Readyset package only requires 4 x AA alkaline batteries for the transmitter, and battery with charger for the chassis.
●Equipped with 2-bevel grease-filled gear diffs on front and rear.
●Large size dog bones and cup joints realize superior reliability and durability.
●Belt mounting battery compartment allows various battery types to be used.
●Full ball bearings that reduce drive loss equipped throughout the drive system.
●Features KS202W waterproof steering servo.
●Includes completely finished body with color scheme and decals applied.
●Sealed differential and transmission deliver reliable performance, even on dusty parking lot surfaces.
●Performance can be further enhanced by installing various optional parts.

Technical data:
■Length 460mm
■Width 200mm
■Wheelbase 260mm
■Tread (F/R) F:184mm/R:184mm
■Tires (F/R) F:φ66×25mm/R:φ66×25mm
■Gear Ratio 6.5:1
■Weight 1620g (approx.)
■R/C system Syncro KT-231P+
■Motor G14L

Kit Contents:
●Completed chassis with R/C radio installed
●Factory assembled body complete with color scheme
●Syncro KT-231P+ transmitter
●Installed 60A waterproof electronic speed controller (forward/brake/reverse)
●Hexagonal wrench
●Spanner

Required for Operation:
●4 x AA batteries for transmitter
●Battery for chassis (recommended: 7.2V Ni-MH battery)
●Charger for battery for chassis
●Tools

249.49€  Inc Tax
Kyosho Radio Controlled EP 4WD Car Fazer Mk2 Audi R8 LMS 1:10 Readyset (electric) (K.34422T1B)
Kyosho Radio Controlled Electric Powered 4WD Car Fazer Mk2 Audi R8 LMS 1:10 Readyset

Now driving R/C is even more fun
Newly designed FZ02 chassis with realistic racing car body

For the pure enjoyment of R/C car driving, the combination of a beautifully reproduced car body with the FAZER series chassis can’t be beaten. Kyosho has taken its standard touring car chassis and given it a full model makeover that has evolved performance to a new level. A simplified design with fewer parts has improved maintenance efficiency and reduced weight while core strength and rigidity has been increased through new materials and ribbing and stiffeners on front and rear. In addition, the symmetrical chassis design synergizes excellent front-rear balance through the suspension with responsive control, irrespective of power source. Featuring slipper clutch, front & rear gear differentials, oil shocks and full ball bearing specs, the high durability and impact resistance allows drivers to unleash the full potential of the chassis. Brake disc wheel hubs with two different offsets (0mm, +5mm) provide compatibility with 190mm and 200mm width body styles and allows the wheelbase to be adjusted to 274mm by replacing some parts (sold separately) for compatibility with other 1/10 scale body styles, in addition the body included. The Readyset package comes fully assembled and includes everything except charger and battery for the chassis, and batteries for the transmitter.

●New design shaft drive full-time 4WD touring chassis(FZ02).
●Factory-assembled Readyset package only requires 4 x AA alkaline batteries for the transmitter, and battery with charger for the chassis.
●Equipped with 2-bevel grease-filled gear diffs on front and rear.
●Large size dog bones and cup joints realize superior reliability and durability.
●Belt mounting battery compartment allows various battery types to be used.
●Full ball bearings that reduce drive loss equipped throughout the drive system.
●Features KS202W waterproof steering servo.
●Includes completely finished body with color scheme and decals applied.
●Sealed differential and transmission deliver reliable performance, even on dusty parking lot surfaces.
●Performance can be further enhanced by installing various optional parts.

Technical data:
■Length 460mm
■Width 200mm
■Wheelbase 260mm
■Tread (F/R) F:184mm/R:184mm
■Tires (F/R) F:φ66×25mm/R:φ66×25mm
■Gear Ratio 6.5:1
■Weight 1620g (approx.)
■R/C system Syncro KT-231P+
■Motor G14L

Kit Contents:
●Completed chassis with R/C radio installed
●Factory assembled body complete with color scheme
●Syncro KT-231P+ transmitter
●Installed 60A waterproof electronic speed controller (forward/brake/reverse)
●Hexagonal wrench
●Spanner

Required for Operation:
●4 x AA batteries for transmitter
●Battery for chassis (recommended: 7.2V Ni-MH battery)
●Charger for battery for chassis
●Tools

249.49€  Inc Tax
Serpent Cobra Buggy Be-RTR 1/8 EP 4WD (Ready To Race) (SER600006)
Serpent Cobra Buggy Be-RTR 1/8 EP

Serpent Cobra 811 Be Buggy RTR EP 1/8 4wd

The RTR version of the successfull high end Serpent 1/8 Cobra Buggy. Complete with DragonRC 2.4 radio, metal-gear servo, brushless motor, waterproof speedo, prepainted-precut body and premounted offroad tyres 4-wheel-drive, 3 geardiffs, 16mm bigbore shocks, aluminium shock towers and chassis, easy radio box, sideguards, low battery boxes, rear wing. Fully upgradable with parts and options from the high end race-version. This super durable Buggy chassis allows a great entry in the racing scene, at a lower cost, and will make you finish your races !

Main features:
- race ready high performance electric ⅛ buggy
- expert pre-assembled and pre-set
- 4wd with cardanshafts, 3 compact ,durable geardiffs, super-easy machined alumiunium motormount, superlow longtudinal batteryboxes, compact speedo-servo mount, unique angled steeringsystem, 16mm bigbore shocks, ballraced anti-roll bars FR and RR, 7075 T6 alu shocktower FR and RR, durable suspension and transmission parts, captured supension pins, the works !!
- Dragon-RC pistol type transmitter 2.4 GHz
- Dragon-RC 120A waterproof speedcontroller
- Dragon-RC powerfull 1650kv brushless sensorless motor
- Dragon-RC 10.5kg strong servo with metal gears
- Dragon-RC high grip premounted racetyres and wheels
- prepainted and precut ultra low Cobra bodyshell and large nylon rear aero-wing
- full color user manual and decalset included

Needed to complete the car:
- 4 x AA batteries for the transmitter
- 2 x Lipo hard-packs 3800 mA or more
- (charging equipment / powersupply)

429.44€  Inc Tax
Futaba R204GF-E S-FHSS/FHSS 4-Channel Receiver (EP Cars/Rock Crawlers) (FUT5102555)
The Futaba R204GF-E 2.4GHz S-FHSS 4-Channel Micro Receiver is compatible with Futaba FHSS and S-FHSS transmitters.

Built-in antenna
The R204GF-E receiver is designed to be used only for Electric Powered Car models. Due to the special design of the receiver, we cannot recommend its use in other types of models (gas powered models). Ideally sized to fit 1/10 or 1/12 on-road electric powered RC cars and rock crawlers.

Frequency Hopping Spread Spectrum (FHSS) technology minimizes interference from other 2.4GHz systems. Easy Link prevents unwanted signal conflicts by using a special, pre-assigned ID code.

Note: NOT compatible with 2.4GHz FASST or FASSTest systems. It will work with FHSS and T-FHSS transmitters, but transmitter mode has to be changed from T-FHSS/FHSS to S-FHSS mode.

Features:
S-FHSS/FHSS auto detection
Compatible with Futaba S-FHSS/FHSS protocol
Dimensions: 35.1x23.2x9mm
Weight: 6g
Operating Voltage: 4.8 to 7.4V
Number of Ports: 4
Number of Channel: 4
S-FHSS: Yes
Range: Full Range (70m @ the best conditions)

46.97€  Inc Tax
Serpent 411 Sport 1/10 4WD Kit (190mm) (SER400006)
Serpent 411 Sport 1/10 4WD Kit

Sport type, clublevel 1/10 scale 190mm electric powered touringcar. 4 wheel-belt-drive, RCM hydraulic shocks, front nylon spool, rear geardiff, independent suspension, black glass-fibre shocktowers, chassis and top-deck. Fully upgradable to race spec. No electronics, tyres/wheels, or body included.

Chassis
Supernarrow, symmetrical , durable black glass-fibre chassisplate with optimised flex design, countersunk holes, central section holes all perfectly in center, pockets for geardiff, spool and spur.

Topdeck
Durable black glass-fibre topdeck with optimised flex design.
Battery-mount brackets and Lipo-holders
Easy to use nylon batter tape holder, which allow the battery tape to run over instead of under the chassis. The holders can be reversed for other battery position. The Lipoholders will securely keep the Lipo in place, also at hard impact.

Servo-mount
The servo is mounted on a separate plate, so flex is less influenced.

Shock tower front
Black glass fibre shock tower with 3 upper shock mounting holes to choose from . Holes for an extra central body post are already made as well.

Front bracket
Machined alumnium front brackets, with belt tension adjusting through excenters. Suspension brackets in durable nylon.

Front suspension
Durable lower front wishbones connected to the inner brackets with strong steel pivot pins. An anti-roll bar system can be mounted as option.

C-hub / steering block
The c-hub type front system creates a super precise steering feeling with great feedback, and strong wheel guidance without chatter.

Shock tower rear
Black glass fibre shock tower with 4 upper shock mounting holes to choose from . The rear body posts are mounted to the top of the rear shock tower.

Rear bracket
Machined alumnium rear brackets, with belt tension adjusting through excenters. Suspension brackets in durable nylon with 3.0 RR RR and split type 0.0 blocks RR FR

Rear suspension
Durable lower rear wishbones connected to the inner brackets with strong steel pivot pins. An anti-roll bar system can be mounted as option.

Rear upright
Strong rear uprights with 2 upper positions, for perfect guidance of the rear wheels.

Motor mount
Machined aluminium motor mount / middle shaft support.

Middle shaft
Ballraced middle shaft with 2 small pully’s and the main Serpent spur gear.

Bumper
Large foam front bumper captured by a upper and lower nylon bumper

Body mount
Front body mount is mounted through the front bumper, and the rear ones are seated on the shock tower. Multiple body position holes to choose from.

Gear-diff
Very compact ballraced gear differential in the rear, with steel gears and axles for durability. Super smooth.

Spool
Front nylon lightweight spool with screw mounted front gear pully

Transmission / belts / pullies
Smooth low friction fine pitch belts combined with optimized nylon pullies.

Driveshaft / wheel hex / wheel axle
Steel driveshafts, combined with ballraced wheel axles and nylon wheel-hex adaptors

Steering system
Steering system with optimized ackermann for neutral steering-feeling.

Shock absorbers
Latest type RCM competition shock absorbers with membranes and checked color coded race springs.

Ball-bearings
Fully ballraced with oiled high speed sealed stainless steel bearings.

Manual and decals:
Full color assembly manual which shows clearly all assembly steps, has all exploded views for easy parts-finding and detailed list with spare parts and optional parts. Decal-sheet with Serpent and 411 logo’s are included as well.

Packing
The 411 Sport comes in a strong small carton box with full color printing.

Optional / upgrading
The Serpent 411 Sport is based on the high end race version of the 411. All parts from the 411 race-version and also all optional, also fit the 411 Sport. This allows you to upgrade your 411 Sport to a higher level race spec step by step, with the parts you select. The 411 Sport parts manual shows those parts, and you can find them in the optional section of the 411 Sport as well.

Product Type: Electric Cars > 1/10 190mm:
Class: 1/10th scale 190mm Electric
Purpose: 190mm touring car
Chassis: 2.5mm glass fibre, CNC machined
Suspension: Front C-Hub suspension system
Rear axle: Rear gear- differential
Front axle: Front nylon spool
Drive system: 4wd through 2 kevlar reinforced timing belts
Shock absorbers: RCM shock absorbers
Wheel base: 254mm +/- 4mm
Track-width front: 190mm /- 6mm
Track-width rear: 190mm /- 6mm
Adjustability: Camber, Caster, Up-Down-stops, Toe-in, width & Roll centres
Instructions: Full colour instruction manual, reference guide
Not included: Motor, battery, speed Controller, tires, body, radio equipment.

199.47€  Inc Tax
Serpent Cobra E-Monster MT-e 1/8 4WD RTR (Ready To Race) (SER600038)
Serpent Cobra E-Monster 1/8 RTR (Ready To Race) with DTS3 transmitter

Serpent Sports introduce the 1/8 Monster Truck in a true Ready to Race version !

This big wheel Monster Truck can conquer any terrain with the oversized tyres. Great looks with realistic looking MT body and the large wheels / tyres. The strong and durable power system offers amazing torque and topspeed. The MT-E suspension comes from our competion range of vehicles and is made to last! Superior handling in both on and offroad use. The long big bore shocks and long durable suspensions arms eats any terrain with ease. DragonRC 2.4 GHz digital transmitter included to manage all the power !

Box
Full color protective box to re-use for car transport or tyres.

The RTR package is really dialed:
- factory assembled racing chassis
- prepainted and precut Monster Truck body
- premounted oversized tyres/wheels/inserts
- pre-set 4S to 6S capable waterproof 150A speedo ( DragonRC)
- 1940kv brushless long body motor (DragonRC)
- Digital 2.4ghz transmitter (DragonRC)
- Metal gear servo 17kg (DragonRC-Savox)
- 3 oil filled gear differentials
- Big bore shocks and machined aluminium shocktowers
- Spring steel transmission parts and turnbuckles, front and rear cvd driveshaft’s
- Extra large battery-cases with easy felcron straps
- Machined aluminium chassis plate
- Fully ballraced
- Batteries for the car and transmitter are not included

Serpent offers a wide variety of optional parts for this car to further improve performance, lighter or for even nicer looks.

519.72€  Inc Tax
Serpent Spyder SRX2 Gen3 CARPET 1/10 Buggy (SER500014)
Serpent Spyder SRX2 Gen3 CARPET 1/10 Buggy

Learning from the X20 we have improved some handling characteristics to make the car more nimble and improve corner speed, stiffening of the chassis in critical areas to change the flex points along with tweaking the roll centre has led to the all improved speed. A Refresh on the already smooth drivetrain gives us more acceleration and nicer torque delivery with the all new ball raced driveshaft system. Innovative New Steering hubs allow a multitude of setup combinations including an industry first axle offset option. The new X20’21 is lighter, faster and more adjustable.

339.77€  Inc Tax
Serpent Medius X20 '21 MID CARBON 1/10 EP (SER400037)
Serpent Medius X20 '21 MID CARBON 1/10 EP

An evolution of the original X20 Medius!

Learning from the X20 we have improved some handling characteristics to make the car more nimble and improve corner speed, stiffening of the chassis in critical areas to change the flex points along with tweaking the roll centre has led to the all improved speed. A Refresh on the already smooth drivetrain gives us more acceleration and nicer torque delivery with the all new ball raced driveshaft system. Innovative New Steering hubs allow a multitude of setup combinations including an industry first axle offset option. The new X20’21 is lighter, faster and more adjustable.

539.85€  Inc Tax
Serpent Medius X20 MID ALU 1/10 EP (SER400034)
Serpent Medius X20 MID ALU 1/10 EP

X20 is the result of utilizing past years design of the Eryx and 4x 1/10 touring car. The chassis is based on the popular Medius mid motor design, using a light weight and strong 1 piece motor mount concept, without any interference between the front and rear chassis flex while still allowing center flex adjustability. The advantage for this style of design is to allow maximum flex capabilities without impacting the drivetrain, meaning smoother power delivery, more consistency and less chance of stripping spurs.

439.81€  Inc Tax
Serpent Cobra SRX8 Truggy EP 1/8 4WD (SER600064)
Serpent Cobra SRX8 Truggy EP 1/8 4WD

After the introduction of the long awaited SRX8-T, Serpent shifted into high gear, and prepared to complete the entire 1/8th line with the SRX8-T Electric. Transforming the Nitro version into an E version in a short time was nothing short of our highest priority. Take the best Nitro Truggy we have ever developed, and go electric. Retain all the key factors: performance, reliability, durability, ease of assembly as well as maintenance, coupled with all new suspension geometry, we feel this all new E Truggy is built for success. Using all of our high quality metals, plastics and rubber, we spared zero when it came to building the best product we could. During testing this all new E truggy exceeded all expectations we have set forth. Not only did this all new E truggy out perform its predecessor, it annihilated it. It was faster, more durable, easier to drive and straight up vicious on the race track. Without Further a due, let’s get started with all the new features of the SRX8-T Electric.

599.63€  Inc Tax
Per Page      1 - 30 of 39