Slovenščina Search
Search Criteria
Products meeting the search criteria
Top-level drivers proclaim this as the most extreme power in an R/C model ever experienced! This extraordinary monster truck features a 3-diff shaft drive full time 4WD chassis with a design running thick with the DNA of the multiple world-championship winning Inferno. The combination of 22.2V 6-cell LiPo battery and 2000Kv KYOSHO SPEED HOUSE TORX8 brushless motor produces a ferocious power to weight ratio that delivers explosive acceleration and top speeds of more than 80km/h. If you are not in full control of the throttle, it can back flip and leave onlookers completely lost for words. This formidable power is harnessed with a high-rigidity bulkhead, hardened chassis, reinforced transmission and diff ring gears, dial adjustable large capacity oil shocks and shock resistant battery case. This feature packed machine comes as a fully assembled Readyset package and requires no frequency band setting with the 2.4GHz Syncro KT-231P+ transmitter and ultra high-torque KS5031-09MW steering servo system pre-installed 4-color printed body is included so you only need to add your own charged LiPo battery and batteries to the transmitter for the mayhem to start. We would like to say this model is for everyone, but such is the power of this machine only expert level drivers can have some degree of confidence in managing its extreme performance. There has never been a monster truck like this one, and maybe there never will be!
●3 diff shaft drive full time 4WD chassis and 22.2V + brushless motor produce power like never before.
●Fully factory assembled Readyset.
●Pre-cut 4 color printed body.
●Pre-installed 2000Kv KYOSHO SPEED HOUSE TORX8 brushless motor. (drip proof)
●2.4GHz R/C system with Syncro KT-231P+ transmitter requires no frequency band control.
●Includes waterproof ultra high torque KS5031-09MW steering servo.
●Incorporates many reinforced parts such as hardened main chassis.
●Features machined aluminum dial adjustable big bore shocks.
●Straight cut bevel gears made from special toughened steel and gear modules on the reinforced diff ring gear are designed to match the machine’s extreme level of power.Equipped with 6-spoke wheels & block tires. Balances rough road running power with high level grip performance.
●Stabilizers and universal joints are equipped on front and rear.
●Mud guard installed on rear axle provides protection from dirt and mud. Promises stable performance under various running conditions.
●Resin chassis stiffener as used on the Inferno NEO is installed on front and rear.
●Full bearing specification features 18 bearings through the drive system and wheels with 2 in the clutch bell.
●Large bumper provides protection for the front suspension holders and lower arm plate.
●Compatible with many optional parts for the Inferno series.
Technical data:
Length: 550mm
Width: 410mm
Height: 210mm
Wheelbase: 355mm
Tread (F/R): 345mm / 345mm
Tire (F/R): 148 x 66mm / 148 x 66mm
Gear Ratio: 17.2：1
Weight: 4,650g
Motor: KSH TORX 8 - 2000kV
Readyset Content:
Pre-assembled chassis with pre-set control linkages
Factory assembled printed body
2.4GHz R/C system Syncro KT-201 pre-installed
L-shape hex wrenches: 1.5, 2.0, 2.5, 3.0mm
Cross wrench
17mm wheel wrench
Required for Operation:
4 x AA alkaline batteries for transmitter
Running battery (2 x 7.2 v Ni-MH or 2 x 2S/3S LiPo battery)
Battery Charger
Easy installation
Telemetry Capable Receiver or Module and Telemetry capable DSMR/DSMX Transmitter required
• 1x DS450 gear G1
• 1x DS450 gear G2
• 1x DS450 gear G3
• 1x DS450 gear G4
- 4 pieces
KST X15-755X HV Digital Coreless Servo Motor (metal gear)
The KST X15-755X HV Brushless servo offers a significantly longer life-span, with a superior power to weight ratio. The servo features a nicely machined aluminium case and offerers high voltage capability. It can be run directly from a 2S LiPo battery without the need for a separate voltage regulator.
Another great benefit of X15 servos is the all new design of a circuit board that generates no counter EMF in any working conditions. It eliminates any possible interference with your flybarless system or receiver unit thus as a result giving you only the best in-flight performance.
Due to the extreme reliability and performance this servos are used in film and motion picture industry as well as in robotics, drones, UAV, UAS, academic researches, and other highly demanding applications such as use in various military projects,..
Technical Details:
Voltage (max.) [V]: 8.4
Torque [kg/cm]@6.0V: 7.2
Torque [kg/cm]@7.4V: 9.0
Torque [kg/cm]@8.4V: 10.2
Speed [s/60°]@6.0V: 0.06
Speed [s/60°]@7.4V: 0.05
Speed [s/60°]@8.4V: 0.04
Width [mm]: 15.0
Length [mm]: 35.5
Height [mm]: 32.5
Weight [g]: 40.0
Motor typ: Coreless
Working Frequency: 760us/560Hz, 450us-1050us
Resolution: <2us
Gear: Hardened Steel
Ball Bearing: 2BB
Output shaft type: 25T
Servo size: Mini
Waterproof: No
Manufacturer: KST
Suitable for use as s Tail Servo on 320-580 size RC Helicopters;
Such as Goblin 380 420, 500, KRAKEN 580, T-REX 450PRO DFC, 450L, 470, 500, Mikado LOGO 480, 500, OXY 5, and similar,..
KST X12-508 HV Digital Coreless Servo Motor (metal gear)
The KST X12-508 HV Brushless servo offers a significantly longer life-span, with a superior power to weight ratio. The servo features a nicely machined aluminium case and offerers high voltage capability. It can be run directly from a 2S LiPo battery without the need for a separate voltage regulator.
Another great benefit of X12 servos is the all new design of a circuit board that generates no counter EMF in any working conditions. It eliminates any possible interference with your flybarless system or receiver unit thus as a result giving you only the best in-flight performance.
Due to the extreme reliability and performance this servos are used in film and motion picture industry as well as in robotics, drones, UAV, UAS, academic researches, and other highly demanding applications such as use in various military projects,..
Technical Details:
Voltage (max.) [V]: 8.4
Torque [kg/cm]@6.0V: 4.2
Torque [kg/cm]@7.4V: 5.2
Torque [kg/cm]@8.4V: 6.2
Speed [s/60°]@6.0V: 0.09
Speed [s/60°]@7.4V: 0.08
Speed [s/60°]@8.4V: 0.07
Width [mm]: 12.0
Length [mm]: 23.0
Height [mm]: 27.5
Weight [g]: 20.0
Motor typ: Coreless
Working Frequency: 1520us/333Hz, 900us-2100us
Resolution: <2us
Gear: Metal Gear
Ball Bearing: 2BB
Output shaft type: 25T
Servo size: Micro
Waterproof: No
Manufacturer: KST
Suitable for Swashplate use on 250-470 size RC helicopters;
Such as Oxy 3, Goblin 280 Fireball, 380, 420, T-REX 250, 300, 450, 470, MSH PROTOS 380, and similars,..
Air Cleaner Set for .15 engines
HD Air Cleaner Sponge Set (2 pieces)
RPM sensor for backplate installation on 40- to 90-sized glow engines
Bolt-on installation with nothing else to install, picks up the rotation of the crankshaft through the backplate
Compatible with Spektrum™ telemetry modules
Has a micro JST connector and plugs into the TM1000 telemetry module
TM1000 AND/OR a Telemetry Capable Transmitter required
• Faster speed with high torque performance, allowing helicopter to perform with faster and higher precision.
• High rigidity, shock resistant metal gears with high strength composite alloy gears with durable structure characteristics.
• Aluminum alloy mid case construction for instantaneous heat dissipation, maintaining servos high efficiency.
• Supports digital and analog control signal.
• Powerful and precise servo.
• Supports 8.4V high voltage input to provide optimal speed and torque performance of the servo.
Specifications
Stall torque: 2.2kg/cm (6.0V), 2.9kg/cm (8.4V)
Motion speed (60°): 0.05sec (6.0V), 0.04sec (8.4V)
Rating voltage: DC 6.0V - 8.4V
Temperature range: -20°C ~ +60°C
Dimensions: 23x12x31.3mm
Weight: 20g
Content
• 1x DS455M Digital Servo
• 2x Socket Button Head Self Tapping Screw
• 1x Socket Screw
• 2x Servo Arm
3 stabilizer bars and attachment links (2.0mm/2.3mm/2.5mm)
For Models:
- Inferno NEO
- Inferno 777
Specs:
Torque(4.8V): 1.2 kg/cm
Torque(6.0V): 1.6 kg/cm
Speed: 0.09 sec (4.8V) / 0.07 sec (6.0V)
Operating Voltage: 4.8 ~ 6.0 DC Volts
Weight: 5.9g
Gear Type: Metal
Controller: Digital
Operating Temperature: -10℃~50℃
Size: 22x8.7x27mm
Spline: 25
Diameter: 25mm
Diameter: 30mm
Can be used with Oracover and other covering films and foils
Thicknes: 0.5mm
Heat resistance: min. 400C
Sheet size: 150x105mm
Ideal material for trimming custom engine exhaust gaskets.
FB - factory balanced propeller
GF Series is specially designed for sport flying and high performance model R/C airplanes with electric motors or glow engines. Made of Glass Fiber Reinforced Composite for strength & durability.
Propeller diameter: 7"/178mm
Propeller pitch: 6"/152mm
Hub thickness: 7.9mm
Shaft diameter: 4.76mm - 6.35mm
Propeller Weight: 7.4g
Direction of rotation: Normal (Tractor)
Material: Glass Fiber R Composite
Color: Black
Dimensions:
ø 7.2 mm x length 31.5 mm
for OS MAX 25SF, 25FX and 25LA engines
Flat Extension cable with JR connectors (0.25mm2)
FB - factory balanced propeller
GF Series is specially designed for sport flying and high performance model R/C airplanes with electric motors or glow engines. Made of Glass Fiber Reinforced Composite for strength & durability.
Propeller diameter: 11"/279mm
Propeller pitch: 7"/178mm
Hub thickness: 14.3mm
Shaft diameter: 6.35mm - 7.94mm
Propeller Weight: 26.1g
Direction of rotation: Normal (Tractor)
Material: Glass Fiber R Composite
Color: Black
Hard rubber insert.
Soft rubber insert.
Can be used on a similar sized radio controlled model airplanes with approx. 1800mm wingspan.
Length: 330mm
Width: 65mm
Height: 40mm
Weight: 330g
(only ski set, RC model airplane not included)
Size: 5mm outer and 3mm inner diameter
Fuel line/hose for radio controlled model engines. Use for petrol fuel.
Dimension: M2
Length: 96cm
Pack content: 1 piece
Flexible/Soft Push Rod - 6cm of steel wire only on the clevis side
Preassembled push rod with metal clevis for radio controlled RC airplane and other models
Dimension: M2
Length: 97cm
Pack content: 1 piece
Standard Push Rod - full length steel wire
Preassembled push rod with metal clevis for radio controlled RC airplane and other models
Length: 38.1mm
Internal Thread: M3
Servo spline: 25T
Servo arm / control horn for use in radio controlled (RC) airplanes and and other models.