Search

RadioLink R8EF 8ch 2.4GHz FHSS Receiver

R8EF Receiver:
Channel: 8ch
Operating voltage: 4.9-10V
Operating current: 19-25mA (input voltage 5V)
Size: 48.5x21x11mm
Weight: 7g
Feature: Fail-safe
Section precision: 4096
Signal output: S-BUS, PPM and PWM
Signal mode: Green LED, output 8 channel PWM signal
SBUS/PPM signal mode: Both red and green LED on, CH1 output S-BUS signal, CH2 output PPM signal, CH3 to CH8 output PWM signal (at the same time)

Package Including:
1x R8EF Receiver

The Futaba R3004SB is a slim 4-channel receiver that is ideally suited to smaller models, as well as gliders/electric gliders that still require full range transmission. Futaba ditched bulky moulded cases and opted for lightweight heat shrink instead, this provides protection for almost any use but helps keep the weight down to just under 5 grams. The electronics are uncompromised, so the R3004SB has full telemetry features and full range transmission. It's slim and compact format makes it ideal for almost any application, whilst a pair of coaxial aerials provide solid stable reception with their length allowing them to be positioned at 90 degrees from each other, to give the maximum possible range.

2.4GHz T-FHSS Air system
4 Channels + S-BUS
S-BUS2 Port for telemetry
Diversity Dual Antenna
Ultra small design for smaller models
Heat shrink enclosure to reduce weight

Specification:
Modulation: T-FHSS Air
Weight: 4.8g
Voltage: 4.8 - 7.4V
Channels: 4ch + S.Bus2 Port
Dimensions: 18x41.4x9.9mm
Frequency: 2.4GHz
Aerial Length: 2x 150mm

Radiolink R9DS 9(10)-Channel Receiver 2.4GHz

Use for Radiolink transmitters AT9, AT9S, AT10 and AT10II.

3400 Meters Control Distance
DSSS and FHSS hybrid spread spectrum, 16 channels pseudo-random frequency hopping, and QPSK modulation ensures excellent anti-interference performance, highly constant, and stable transmission signal present on all 10 channels of R9DS.
3400m range enables all possible RC fun.
Maximum PWM jitter is 1.84us with a standard of just 0.5us.

R9DS Receiver:
Channels:
- 9 channels: output 9 channels PWM signal, with red LED.
- 10 channels: output 10 channels signal, support SBUS and PWM signal output synchronously, with blue LED.
Working voltage: 4.8-10V
Working current: 38-45mA（input voltage: 5V）
Size: 43*24*15mm
Weight: 9g
4096 section precision, 0.25us per section, servo anti-shake rudder.

Receiver integrate telemetry sensor including signal strength and voltage. Support extended engine voltage telemetry module PRM-01 and module PRM-02 can feedback GPS information, Speed, voltage etc. on AT9/AT9S/AT10/AT10II display when work with flight controller APM or PIX.

Package Including:
1x R9DS Receiver

Radiolink R12DS 12-Channel Receiver 2.4GHz

Use for Radiolink transmitters AT9, AT9S, AT9S Pro, AT10 and AT10II.

4000 Meters Control Distance
DSSS and FHSS hybrid spread spectrum, 16 channels pseudo-random frequency hopping, and QPSK modulation ensures excellent anti-interference performance, highly constant, and stable transmission signal present on all 12 channels of R12DS.
4KM Range enables all possible RC fun.
The maximum PWM jitter is 1.84us with a standard of just 0.5us.

R12DS Receiver:
Channels:
- 11 channels for PWM signal output
- 12 channels for SBUS&PWM signal output.
Working voltage: 4.8-10V
Working current: 38-45mA（input voltage: 5V）
Size: 50 x 32 x 14.5mm
Weight: 14g
4096 section precision, 0.25us per section, servo anti-shake rudder.
Control distance: approx. 4000m in the air.

Receiver integrate telemetry sensor including signal strength and voltage. Support extended engine voltage telemetry module PRM-01 and module PRM-02 can feedback GPS info, Speed, voltage etc. on AT9/AT9S/AT9S Pro/AT10/AT10II display when work with flight controller APM or PIX.

Package Including:
1x R12DS Receiver