Search

Search Criteria

 
 
 
 

Products meeting the search criteria

Sort By:  
6.10€  Inc Tax
4.27€  Inc Tax
6.71€  Inc Tax
Align T-Rex 300X Dominator COMBO (RH30E02X)
T-REX 300X, small but all-in-perfect. It adopts DFC rotor head unit, low CG and low wind resistance providing direct flight responses. The carbon fiber main frame is made of composite material and with reinforcement plate and brace assembly effectively enhancing structural intensity and torsion resistance. Narrow body design makes mechanical structure much stronger. The battery slider and top-mounted motor design with anodized bright red color brings pretty texture on this model. Thicken aluminum alloy tail boom for the best torsion resistance and increase the tail support rod lifetime. The progressive lightweight landing skid making this model the leader in this class. Plus the fiberglass painted canopy features lightweight and low in wind resistance.

T-REX 300X equipped with the standard high torque and high efficiency 300MX 3700KV/2216 brushless motor not only contributes to dramatic power increase, the high efficiency cooling system enables cooler operating temperature during and after flights when compared to motor of previous generation. Allow to provide consistent power output and keep stable RPM in non-stop 3D flying presenting perfect performance. Also it pairs with digital HV DS450 and DS455 servos, supporting 8.4V output, fast response and high torque. The new 25A brushless speed governor support 5~8.4V adjustable BEC voltage.

T-REX 300X is tiny but everything all-in-one so that can perform well in not only in-door show but also outdoor 3D flights. This model offers you the best bargain price allow you to have fun flying at any time.


Specifications

T-REX 300X
Length: 476mm
Height: 158mm
Width: 88mm
Main Blade Length: 230mm
Main Rotor Diameter: 525mm
Tail Rotor Diameter: 143mm
Motor Pinion Gear: 14T
Main Drive Gear: 115T
Main Drive Pulley: 40T
Tail Drive Gear: 13T
Drive Gear Ratio: 8.21:1:3.08
Weight (w/o battery): 418g


Content


• 1x T-REX 300X DOMINATOR Kit
• 2x 230 Carbon Fiber Blade
• 2x 50 Tail Blade
• 1x RCE-BL25A 25 Brushless ESC
• 1x 300MX Brushless Motor (3700KV/2216)
• 3x DS450 Digital servo
• 1x DS455 Digital servo


Required for assembly


• 1x Transmitter (min. 6-channels, helicopter system)
• 1x Receiver (min. 6-channels)
• 1x Flybarless System
• 1x Flight battery (3S 11,1V LiPo 1300mAh 30C)
• 1x Charger (for 3S LiPo)
348.92€  Inc Tax
Damper Rubber 75°, Black (H25038A)
• Use for T-REX 250 / 300X

Content
• 2x Damper rubber black 75° (2.5x5x2.6mm)


3.66€  Inc Tax
300X / 250DFC M2 socket collar screw (H25125)
• Use for T-REX 300X / 250 with DFC upgrade

Content
• 4x Socket collar screw (M2x12mm)
• 4x Washer (2x3.6x0.2mm)


3.66€  Inc Tax
300X Landing Skid (H30F001XXT)
• Use for T-REX 300X

Content
• 1x 300 Landing Skid



6.10€  Inc Tax
Align 3S1P 11.1V 1300mAh 30C (XT30) (HBP13002)
1x Align 3S1P 11.1V 1300mAh 30C (XT30)


19.52€  Inc Tax
Align T-Rex 300X Dominator BEASTX Combo - PNP (RH30E02X-MBP)
T-REX 300X, small but all-in-perfect. It adopts DFC rotor head unit, low CG and low wind resistance providing direct flight responses. The carbon fiber main frame is made of composite material and with reinforcement plate and brace assembly effectively enhancing structural intensity and torsion resistance. Narrow body design makes mechanical structure much stronger. The battery slider and top-mounted motor design with anodized bright red color brings pretty texture on this model. Thicken aluminum alloy tail boom for the best torsion resistance and increase the tail support rod lifetime. The progressive lightweight landing skid making this model the leader in this class. Plus the fiberglass painted canopy features lightweight and low in wind resistance.

T-REX 300X equipped with the standard high torque and high efficiency 300MX 3700KV/2216 brushless motor not only contributes to dramatic power increase, the high efficiency cooling system enables cooler operating temperature during and after flights when compared to motor of previous generation. Allow to provide consistent power output and keep stable RPM in non-stop 3D flying presenting perfect performance. Also it pairs with digital HV DS450 and DS455 servos, supporting 8.4V output, fast response and high torque. The new 25A brushless speed governor support 5~8.4V adjustable BEC voltage.

T-REX 300X is tiny but everything all-in-one so that can perform well in not only in-door show but also outdoor 3D flights. This model offers you the best bargain price allow you to have fun flying at any time.


Specifications

T-REX 300X
Length: 476mm
Height: 158mm
Width: 88mm
Main Blade Length: 230mm
Main Rotor Diameter: 525mm
Tail Rotor Diameter: 143mm
Motor Pinion Gear: 14T
Main Drive Gear: 115T
Main Drive Pulley: 40T
Tail Drive Gear: 13T
Drive Gear Ratio: 8.21:1:3.08
Weight (w/o battery): 418g


Content


• 1x T-REX 300X DOMINATOR Kit
• 1x MICROBEAST Plus Flybarless System
• 2x 230 Carbon Fiber Blade
• 2x 50 Tail Blade
• 1x RCE-BL25A 25 Brushless ESC
• 1x 300MX Brushless Motor (3700KV/2216)
• 3x DS450 Digital servo
• 1x DS455 Digital servo


Required for assembly


• 1x Transmitter (min. 6-channels, helicopter system)
• 1x Receiver (min. 6-channels)
• 1x Flight battery (3S 11,1V LiPo 1300mAh 30C)
• 1x Charger (for 3S LiPo)
448.96€  Inc Tax
300X Carbon Main Frame (H30B001XXT)
• Use for T-REX 300X

Specifications
• Carbon Fiber Material

Content
• 1x 300 Carbon Fiber Upper Frame
• 1x 300 Carbon Fiber Lower Frame
• 2x M2 Cone Nut (M2x1.8mm)


19.52€  Inc Tax
Align T-Rex 300X Dominator SUPER Combo - RTF (RH30E01X)
Align newly designed T-REX 300X RTF (Ready to Fly), pre-assemble and combo with ALIGN A10 transmitter 10 channels 2.4GHz system and MiniGRS gyro makes flying much easier.

T-REX 300X, small but all-in-perfect. It adopts DFC rotor head unit, low CG and low wind resistance providing direct flight responses. The carbon fiber main frame is made of composite material and with reinforcement plate and brace assembly effectively enhancing structural intensity and torsion resistance. Narrow body design makes mechanical structure much stronger. The battery slider and top-mounted motor design with anodized bright red color brings pretty texture on this model. Thicken aluminum alloy tail boom for the best torsion resistance and increase the tail support rod lifetime. The progressive lightweight landing skid making this model the leader in this class. Plus the fiberglass painted canopy features lightweight and low in wind resistance.

T-REX 300X equipped with MiniGRS flybarless system special designed for ALIGN small helicopters (Under 500 series). It's light and simple with easy and quick settings, suitable for most pilots and beginners. Also the standard high torque and high efficiency 300MX 3700KV/2216 brushless motor not only contributes to dramatic power increase, the high efficiency cooling system enables cooler operating temperature during and after flights when compared to motor of previous generation. Allow to provide consistent power output and keep stable RPM in non-stop 3D flying presenting perfect performance. Also it pairs with digital HV DS450 and DS455 servos, supporting 8.4V output, fast response and high torque. The new 25A brushless speed governor support 5~8.4V adjustable BEC voltage.

T-REX 300X RTF is tiny but everything all-in-one so that can perform well in not only in-door show but also outdoor 3D flights. This model offers you the best bargain price allow you to have fun flying at any time.


Specifications

T-REX 300X
Length: 476mm
Height: 158mm
Width: 88mm
Main Blade Length: 230mm
Main Rotor Diameter: 525mm
Tail Rotor Diameter: 143mm
Motor Pinion Gear: 14T
Main Drive Gear: 115T
Main Drive Pulley: 40T
Tail Drive Gear: 13T
Drive Gear Ratio: 8.21:1:3.08
Weight (w/o battery): 418g


Specifications

A10 Transmitter
Channels: 10
Available Models: Helicopter / Airplane / Multicopter
Frequency range: 2.408 ~ 2.475 GHz
Power: no higher than 20dBm (for EU)
System Mode: AFHDS 2A
Suitable Voltage Range: 4.0 ~ 6.0V DC
Receiving Distance: the open ground no interference < 1000M
Low Voltate Warning: Lower than 4.2V
Weight: 485g (excluded battery)
Size: 275x187x102mm


Specifications

MiniA.BUS Receiver
Channel: 14 channels
RX Sensitivity: -105dBm
RF Range: 2.4055 ~ 2.475 GHz
System Mode: 2.4G system AFHDS 2A
Power: 4.0 ~ 8.4V DC
Transmit Distance: In open space without interference <150M


Specifications

MiniGRS Flybarless System
Operating voltage range: DC 3.5~8.4V
Operating current consumption: <100mA @ 4.8V
Rotational detection rate: ±300°/sec
Rudder yaw detection rate: ±600°/sec
Sensor resolution: 12 BIT
Swashplate Support: 120° CCPM Swashplate
Mode Support: T-REX 250, T-REX 300, T-REX 450, T-REX 470, T-REX 500
Receiver Support: ALIGN A.BUS, Futaba S-FHSS S.BUS, Spektrum DSM2/DSMX remote receiver
Operating temperature: -20℃ ~ 65℃
Operating humidity: 0% ~ 95%
Size: 37.6x22.4x13mm


Specifications

RCC-3X Charger
Input Voltage: AC 100V~240V (50/60Hz)
Output Voltage: 2cell DC 7.4V / 3cell DC 11.1V
Supported Battery Type: Li-polymer / Li-ion
Charging Method: CC/CV
Charging Current: 2A
Size: 123x74.3x32mm
Weight: 260g


Specifications

Battery
Output: 11.1V 1300mAh 14.4Wh (3S1P)
Supports 5C charging
Dimension: 74x36.5x21mm
Weight: 115g


Content


• 1x T-REX 300X DOMINATOR Kit
• 1x MiniGRS Flybarless System
• 2x 230 Carbon Fiber Blades
• 2x 50 Tail Blade
• 1x RCE-BL25A 25 Brushless ESC
• 1x 300MX Brushless Motor(3700KV/2216)
• 3x DS450 Digital servo
• 1x DS455 Digital servo
• 1x A10 Radio Control System Combo
• 1x MiniA.BUS Receiver
• 1x Balance Charger RCC-3SX
• 1x 3S1P 11.1V 1300mAh / 30C
528.26€  Inc Tax
300X Main Frame Mounting Bolt (H30B002XXT)
• Use for T-REX 300X

Specifications
• Aluminium Alloy Material

Content
• 8x 300X Main Frame Mounting Bolt (2x3.2x6.8mm)


9.76€  Inc Tax
300X Battery Mount (H30B003XXT)
• Use for T-REX 300X

Specifications
Carbon Fiber Material

Content
• 1x 300 Battery Mount



7.32€  Inc Tax
300X Gyro Mount Set (H30B004XXT)
• Use for T-REX 300X

Specifications
Carbon Fiber Material

Content
• 1x 300 Gyro Mount
• 1x 300 Rudder Servo Mount Board
• 2x M2 Cone Nut (M2x1.8mm)


14.03€  Inc Tax
300X Frame Mounting Block (H30B007XXT)
• Use for T-REX 300X

Specifications
Aluminum Alloy Material

Content
• 2x 300 Frame Mounting Block
• 2x 300 Frame Mounting Bolt (M2x30mm)
• 8x Socket Screw (M2x4mm)


17.69€  Inc Tax
300X Shapely Reinforcement Plate And Brace Assembly (H30B009XXT)
• Use for T-REX 300X

Specifications
Aluminium Alloy Material

Content
• 1x 300 Shapely Reinforcement Brace (R)
• 1x 300 Shapely Reinforcement Brace (L)
• 8x Socket Screw (M2x8mm)



17.69€  Inc Tax
300X Main Shaft Bearing Block (H30B011XXT)
• Use for T-REX 300X

Specifications
Aluminium Alloy Material

Content
• 2x 300 Main Shaft Bearing Block
• 2x Bearing MR84ZZ (4x8x3mm)
• 8x Socket Screw (M2x4mm)
• 4x Socket Screw (M2x6mm)
• 4x Socket Screw (M2x8mm)


20.74€  Inc Tax
450 Tail Shaft Slide Bush (H45T001XXT)
• Use for T-REX 300X / 450 / 470L

Content
• 1x Tail shaft slide bush (3x4x10.8mm)



6.10€  Inc Tax
470L Tail Pitch Control Link (H47T022XXT)
• Use for T-REX 300X / 470L

Content
• 2x 450 V2 Tail Pitch Control Link (10.75x5.8x5.7mm)
• 4x Collar B (2x3x2.5mm)
• 2x Socket Button Head Collar Screw (M2x6mm)



6.10€  Inc Tax
50 Tail Blade (HQ0503A)
• Use for T-REX 300X

Specifications
Shape: Symmetrical Wing
Length: 50mm
Width: 2.6mm
Shaft Diameter: 2mm
Weight: 2.8g/set

Content
• 2x Tail rotor blade



6.10€  Inc Tax
Canopy Nut (HS1279T)
• Use for T-REX 450 / 300X

Content
• 4x canopy nut



4.27€  Inc Tax
DS4 Servo Horn Set (HSP41503)
• Suitable for servos of ALIGN DS4 series

Content
• 3x DS4 Servo Horn, long
• 1x DS4 Servo Horn, short



4.27€  Inc Tax
300X Painted Canopy (HC3001)
• Use for T-REX 300X

Content
• 1x Painted Canopy
• 2x Fiberglass Canopy Nut



18.91€  Inc Tax
Main Drive Gear 115T (H30G002XXT)
• Use for T-REX 300X
• Must use with:
- Motor Pinion Gear 14T (H30G003XXT)

Specifications
Polyoxymethylene Material

Content
• 2x Main Drive Gear 115T


6.71€  Inc Tax
Motor Pinion Gear 14T (H30G003XXT)
• Use for T-REX 300X
• Must use with:
- Main Drive Gear 115T (H30G002XXT)

Specifications
Stainless Steel Material
Modulus: 0.5
Shaft Diameter: 3mm
Weight : 1.2g/pc

Content
• 2x Motor Pinion Gear 14T


6.71€  Inc Tax
F2.5-6M Thrust Bearing (H30R001XXT)
• Use for T-REX 300X Feathering Shaft (H30H003XXT)

Content
• 4x F2.5-6 Thrust Bearing (2.5x6x3mm)
• 4x Washer (4x6x0.5mm)



6.71€  Inc Tax
Tail Drive Belt (H30T003XXT)
• Use for T-REX 300X

Content
• 1x Tail Drive Belt



6.71€  Inc Tax
300X Tail Boom Mount (H30T004XXT)
• Use for T-REX 300X
• Must use with:
- 300X Carbon Main Frame (H30B001XXT)

Specifications
Glass Fiber Reinforced Nylon Material

Content
• 1x 300 Tail Boom Mount (L)
• 1x 300 Tail Boom Mount (R)
• 4x Hex Mounting Bolt (M2x14mm)



6.71€  Inc Tax
RCM-BL300MX Brushless Motor (3700KV/2216) (HML30M01)
• Use for T-REX 300

Specifications
Input voltage: 3S
Max continuous current: 24A (36A 5sec)
Max output power:Approx. 260W (400W 5sec)
KV value: 3700KV
Stator Dimension: 2216
Stator Arms: 9
Magnet Poles: 6
Spindle: 3.5mm
Dimension: 29.2x43.7mm
Weight: Approx. 70g

Content
• 1x 300MX Brushless Motor
• 2x Socket Screw (M2.5x6mm)
• 3x 3.5mm gilt terminal



45.75€  Inc Tax
RCE-BL25A Brushless ESC 25A (HES02501)
• BEC output voltage(6~7.4V) to show great performance on the torque & speed of servo.
• BEC output utilizing switching power system,suitable for 3S~6S Li battery, with continuous current rating of 3A, and burst rating of 7A.
• Three programmable throttle speed settings to support quick throttle response.
• Govener Mode (governor speed controller slow down system).
• Small and compact PCB design for ease of installation.
• Large heatsink for great thermal performance.
• High compatibility to work with 98% brushless motors in the market.
• Ultra smooth motor start design to run with all kinds of brushless motors.
• The power inlet adapts Japanese made "Low ESR" capacitor in order to provide stable power source.
• The BEC power outlet adapts a Japanese made specialty polymer aluminum electrolytic capacitor. It provides better noise filtering capability than other BL ESC in the market, and moreover to give more stable performanceof R/C receiver and BEC.
• Users can use the transmitter to operate the motor setting by Super stylized CPU.
• If the aircraft should land or crash in an unexpected location and become lost, the pilot can enable the Aircraft Locator Option. The Aircraft Locator Option is engaged by tuming off the transmitter. When the ESC does not receive a signal from the transmitter for 30 seconds, it will start to send an alarm to the motor. The sound of the alarm will aid the pilot to locate the aircraft. This option will not work with a PCM receiver that has SAVE function enabled, or with low noise resistant PM receivers.

Specifications
Continuous current: 25A
Surge current: 40A (for 15seconds)
Supporting motor types: 2 poles to 10+poles in/outrunner brushless motors
Supporting maximum RPM: 2poles=>190,000rpm, 6poles=>63,000rpm
Supporting input voltage: 11.1V to 22.2V
Supporting battery types: Li-Ion / Li-Po 3-6 cells
BEC output: 6.0V - 7.4V, 3A (Burst 7A)
Size: 47x22x10mm
Weight: 27g

Content
• 1x RCM-BL300MX Brushless Motor 3700KV
• 2x Socket Screw (M2.5x6mm)
• 3x ALIGN standard 3.5mm gilt terminal



41.48€  Inc Tax
Align Mini A.BUS 14-Ch AFHDS 2A Receiver (HEG00003)
• Use for A10 Transmitter

Specifications
Channel: 14 channels
RX Sensitivity: -105dBm
RF Range: 2.4055 ~ 2.475 GHz
System Mode: 2.4G system AFHDS 2A
Input Power: 4.0 ~ 8.4V
Transmit Distance: In the air without interference <150M
Dimension: 20x15.2x5.3mm

Content
• 1x Mini A.BUS Receiver
• 1x Receiver Bind Plug
• 1x Double Sided Tape



28.06€  Inc Tax
300X / 450 / 470L Metal I-shaped Arm (H47T017XXT)
• Use for T-REX 300X / 450L / 470L

Content
• 1x 450 Metal I-shaped Arm
• 1x 450 Metal Mount Link
• 1x Linkage ball A (M2x2.5) (4.75x7.18mm)
• 4x Bearing F681XZZ (1.5x4x5x2mm)
• 2x Bearing FMR52ZZ (2x5x2.3mm)
• 4x Socket button head screw (#0-80x4mm)
• 2x Socket button head screw (M2x4mm)



15.86€  Inc Tax
470L Tail Pitch Assembly (H47T016XXT)
• Use for T-REX 300X / 470L

Content
• 1x Metal Bearing mount
• 2x Bearing MR74ZZ (4x7x2.5mm)
• 1x Bearing mount washer (4x5.1x1.6mm)
• 1x Slide shaft (2x3x8.4mm)
• 1x Metal T type arm
• 2x Collar screw (M2x6mm)
• 2x Control link (1.5x2.3x1.4mm)
• 4x Collar B (2x3x2.5mm)
• 2x Collar screw (M2x6.5mm)


13.42€  Inc Tax
Per Page      1 - 30 of 60