Kavan

Sort By:  
Scale Treaded AirWheel with Walve 100mm (2 pcs) (KAV0259)
Kavan Scale AirWheels are designed to safely absorb the shock associated with landing large or heavy model airplanes.

Available in two styles, Scale Treaded AirWheels sport a modern appearance with longitudinally grooved tires.

Scale Balloon AirWheels give a more vintage appearance with smooth tires.

If desired, the two-piece hub allows for hidden installation of the wheel collars. Tires inflate using a bicycle pump to a maximum of 1 bar (14 psi). Both include high quality Delrin® adapters for 3/16“ axles (can easily be drilled to 5 mm) and Delrin® adapters for 6 mm axles (can easily be drilled to 1/4“).

For the rare occasion that ball bearings are needed, Scale AirWheels are available with ball bearings for 6 mm axles (adds 5 g to the weight).

Includes: 1 Brass Inflation Nipple

24.40€  Inc Tax
Kavan Electromagnetic Brake (1 pc) (KAV0263)
Kavan Electromagnetic Brake

Particularly suitable for large or heavy model aircraft. Electromagnetic Brake offers smooth and constant braking action without locking the wheels. Consist of an electromagnetic coil in a steel brake drum and zinc-plated steel brake disc with a smooth aluminum coating on one side.

  • Mount the brake drum on the wheel axle.
  • The brake disc is positioned between the brake drum and wheel hub.
  • Switch the brake on; the brake disc is pulled to the brake drum for braking action.

Operate the brake with Electronic Switch (min. 5 Amps).

Fits Scale AirWheels, Order numbers; KAV0180 - KAV0183 and KAV0259 - KAV0267. For 6 mm (ø) wheel axle.

Weight 63 g Diameter: 40 mm Total width: 16 mm Operating voltage: 4.8 to 9V (the higher the voltage, the stronger the braking action)


Use this accessory for radio controlled (RC) airplanes and other models. Suitable also for scale aircraft.

49.41€  Inc Tax
Kavan Glow Plug - Standard (No. 2) (KAV9012)
The new Kavan glow plug series for two-stroke aircraft model internal combustion engines. Only the highest quality materials are used in the production of these glow plugs.

Glow Plug No. 2 - Standard

Use for radio controlled (RC) airplanes, helicopters, boats and other models.

5.49€  Inc Tax
Kavan Zinc-Plated Solder Clevis w/o thread (10 pcs) (KAV0080/10)
Kavan Zinc-Plated Solder Clevis without thread

Dimension: inner diameter 2mm
Pack content: 10 pieces

Made from high quality heavy gauge spring steel which doesn‘t fatigue with use. Zinc-plated for easy soldering.

Use for radio controlled RC airplane and other models

3.66€  Inc Tax
Kavan Zinc-Plated Steel Push Rods - M2 / d=1.7mm / 200mm (10 pcs) (KAV0005A/10)
Kavan Zinc-Plated Steel Push Rods for M2 metal/plastic clevises or ball links

Dimension: M2 / wire diameter = 1.7mm
Length: 200mm
Pack content: 10 pieces

High quality Zinc-Plated steel pushrods for metal or plastic clevises or ball links. Overall length 200mm. Thread length 15mm. Pushrod diameter 1,7mm with M2 thread on one end.

Use for radio controlled RC airplane and other models

5.49€  Inc Tax
Kavan Fuel Tank 150 ml (6oz) (KAV0028)
Kavan Fuel Tank 150ml (6oz) with glow stopper kit #KAV0033

Special manufacturing process eliminates the possibility of thin spots in the tank wall. It is durable enough even for pressurized fuel systems. A brass ring around the neck eliminates the "split neck" common in some tanks using an expansion stopper. The rectangular shape optimizes capacity and prevents fuel starvation associated to the tank rotating and cutting off the fuel supply. A nut behind the rear nylon disc eliminates the possibility of a stripped thread that could result in a fuel leak.

The heavy metal fuel pickup (clunk) ensures constant fuel flow during any maneuver. Six molded channels in the tank sides provide for easy routing of the throttle pushrod nad any other linkages. Includes pre-bent brass tubing for quick assembly.

Can be used with either glow fuel or gasoline fuels. For gasoline use/order Replacement Rubber Kit KAV0032

6.10€  Inc Tax
Kavan Fuel Tank 100 ml (4oz) (KAV0027)
Kavan Fuel Tank 100ml (4oz) with glow stopper kit #KAV0033

Special manufacturing process eliminates the possibility of thin spots in the tank wall. It is durable enough even for pressurized fuel systems. A brass ring around the neck eliminates the "split neck" common in some tanks using an expansion stopper. The rectangular shape optimizes capacity and prevents fuel starvation associated to the tank rotating and cutting off the fuel supply. A nut behind the rear nylon disc eliminates the possibility of a stripped thread that could result in a fuel leak.

The heavy metal fuel pickup (clunk) ensures constant fuel flow during any maneuver. Six molded channels in the tank sides provide for easy routing of the throttle pushrod nad any other linkages. Includes pre-bent brass tubing for quick assembly.

Can be used with either glow fuel or gasoline fuels. For gasoline use/order Replacement Rubber Kit KAV0032

5.49€  Inc Tax
Kavan Gap Seal Tape for Control Surfaces (20x4000mm) (KAV0384)
Kavan Gap Seal Tape for Control Surfaces

Package: Clear tape 20x4000mm

Seal the control surface gap for better aerodynamics on gliders, hotliners, pylons, airplanes and other (RC) radio controlled models.

Use this Kavan gap seal tape for better soaring / gliding characteristics and improved aerodynamics on fast gliders, hotliners pylons and other radio controlled (RC) models.

7.93€  Inc Tax
Kavan Lock Nut M3 (10 pcs) (KAV0092A)
Kavan Lock Nut

Size: M3
Package: 10 pieces

Use for radio controlled (RC) airplanes, boats and other models.

1.22€  Inc Tax
Kavan Fuel Tank 250 ml (8oz) (KAV0029)
Kavan Fuel Tank 250ml (8oz) with glow stopper kit #KAV0033

Special manufacturing process eliminates the possibility of thin spots in the tank wall. It is durable enough even for pressurized fuel systems. A brass ring around the neck eliminates the "split neck" common in some tanks using an expansion stopper. The rectangular shape optimizes capacity and prevents fuel starvation associated to the tank rotating and cutting off the fuel supply. A nut behind the rear nylon disc eliminates the possibility of a stripped thread that could result in a fuel leak.

The heavy metal fuel pickup (clunk) ensures constant fuel flow during any maneuver. Six molded channels in the tank sides provide for easy routing of the throttle pushrod nad any other linkages. Includes pre-bent brass tubing for quick assembly.

Can be used with either glow fuel or gasoline fuels. For gasoline use/order Replacement Rubber Kit KAV0032

6.71€  Inc Tax
Kavan Glow Plug - Cold / 4-stroke (No. 4T) (KAV9014)
The new Kavan glow plug series for two-stroke aircraft model internal combustion engines. Only the highest quality materials are used in the production of these glow plugs.

Glow Plug No. 4T - Cold / 4-stroke engines

Use for radio controlled (RC) airplanes, helicopters, boats and other models.

7.93€  Inc Tax
Kavan Gas Fuel Tank Stopper Kit (KAV0032)
Kavan Replacement Gas Fuel Tank Stopper Kit

Rubber stopper kit for Kavan Fuel Tanks.  Use with gasoline fuels.

4.27€  Inc Tax
Kavan Control Horn - Small/20mm (5 pair) (KAV6380/5)
Kavan Control Horn for radio controlled RC airplane models

Dimension: Small - 20mm
Pack content: 5 pair

6.10€  Inc Tax
Kavan Aluminum Fuel Line Plug (2 pcs) (KAV0289)
Kavan Aluminum Fuel Line Plugs.

Package: 2 pieces / d=4.10mm

Use for radio controlled (RC) airplanes, helicopters, boats and other models.

1.83€  Inc Tax
Kavan Glow Plug - Cold (No. 3) (KAV9013)
The new Kavan glow plug series for two-stroke aircraft model internal combustion engines. Only the highest quality materials are used in the production of these glow plugs.

Glow Plug No. 3 - Cold

Use for radio controlled (RC) airplanes, helicopters, boats and other models.

7.32€  Inc Tax
Kavan Glow Plug - Hot (No. 1) (KAV9011)
The new Kavan glow plug series for two-stroke aircraft model internal combustion engines. Only the highest quality materials are used in the production of these glow plugs.

Glow Plug No. 1 - HOT

Use for radio controlled (RC) airplanes, helicopters, boats and other models.

5.49€  Inc Tax
Kavan Blind Nut M6 (10 pcs) (KAV6076)
Kavan Blind Nut

Size: M6
Package: 10 pieces

Use for radio controlled (RC) airplanes, boats and other models.

3.66€  Inc Tax
Kavan Blind Nut M5 (10 pcs) (KAV6075)
Kavan Blind Nut

Size: M5
Package: 10 pieces

Use for radio controlled (RC) airplanes, boats and other models.

3.66€  Inc Tax
Kavan Blind Nut M4 (10 pcs) (KAV6074)
Kavan Blind Nut

Size: M4
Package: 10 pieces

Use for radio controlled (RC) airplanes, boats and other models.

3.66€  Inc Tax
Kavan Blind Nut M3 (10 pcs) (KAV6073)
Kavan Blind Nut

Size: M3
Package: 10 pieces

Use for radio controlled (RC) airplanes, boats and other models.

3.66€  Inc Tax
Kavan Square Blind Nut M2 (8 pcs) (KAV0088A)
Kavan Square Blind Nut

Size: M2
Package: 8 pieces

Use for radio controlled (RC) airplanes, boats and other models.

4.27€  Inc Tax
Kavan Hexagon Nut M2 (20 pcs) (KAV0138)
Kavan Hexagon Nut

Size: M2
Package: 20 pieces

Use for radio controlled (RC) airplanes, boats and other models.

0.61€  Inc Tax
Kavan Hexagon Nut M3 (20 pcs) (KAV0137A)
Kavan Hexagon Nut

Size: M3
Package: 20 pieces

Use for radio controlled (RC) airplanes, boats and other models.

0.61€  Inc Tax
Kavan Lock Nut M2 (10 pcs) (KAV0092C)
Kavan Lock Nut

Size: M2
Package: 10 pieces

Use for radio controlled (RC) airplanes, boats and other models.

3.66€  Inc Tax
Kavan Balsa Stripper Smart (KAV735)
Kavan Balsa Stripper Smart

Adjustable whole-metal balsa stripper for precise cutting strips of balsa wood, other soft craft wood or foam plastics.

Adjustable strip width: 0-30mm and 30-60mm


Spare blades: KAV736


Use this tool for building a radio controlled airplanes and other RC models

18.91€  Inc Tax
Blades for Kavan Balsa Stripper Smart (10 pcs) (KAV736)
Kavan Spare Blades for Balsa Stripper Smart


Spare blades for: KAV735


Use this tool for building a radio controlled balsa airplanes and other RC models

1.83€  Inc Tax
Kavan MAXI Ball Links M3 - Brass Ball 6mm/3mm (10 pcs) (KAV1404/10)
Kavan M3 Nylon Ball Link with Brass Ball

Dimension: M3
Ball Size: outer dia. 6mm / inner dia. 3mm
Pack content: 10 pieces

High quality nylon ball links for large radio controlled airplanes, large gas powered boats and off-road cars. Very strong and reliable joint that effortlessly swivels in the nylon socket. Nickel-plated ball

Use in radio controlled RC airplanes and other models for push rod assembly.

12.81€  Inc Tax
Kavan MAXI Ball Links M3 - Hexbase Ball 6mm/3mm (10 pcs) (KAV1407/10)
Kavan M3 Nylon Ball Link with Hexbase Brass Ball

Dimension: M3
Ball Size: outer dia. 6mm / inner dia. 3mm
Pack content: 10 pieces

High quality nylon ball links for large radio controlled airplanes, large gas powered boats and off-road cars. Very strong and reliable joint that effortlessly swivels in the nylon socket. Nickel-plated ball

Use in radio controlled RC airplanes and other models for push rod assembly.

13.42€  Inc Tax
Kavan Nylon Ball Link with Steel Push Rod - M2 / d=1.7mm / 200mm (10 pcs) (KAV0119/10)
Kavan M2 Nylon Ball Link with Brass Ball and Zinc-Plated Steel Push Rod

Dimension: M2 / wire diameter = 1.7mm
Length: 200mm
Pack content: 10 pieces

M2 Nylon ball link with brass ball and with high quality zinc-plated steel pushrod (for metal or plastic clevises or ball links). Overall length 200mm. Thread length 15mm. Pushrod diameter 1,7mm with M2 thread on one end.

Use for radio controlled RC airplane and other models

12.20€  Inc Tax
Kavan Metal Clevis with Steel Push Rod - M3 / d=2.6mm / 200mm (10 pcs) (KAV0007A/10)
Kavan Metal Clevis M3 with Zinc-Plated Steel Push Rod

Dimension: M3 / wire diameter = 2.6mm
Length: 200mm
Pack content: 10 pieces

Metal Clevis M3 with high quality Zinc-Plated steel pushrod for metal or plastic clevises or ball links. Overall length 200mm. Thread length 15mm. Pushrod diameter 2,6mm with M3 thread on one end.

Use for radio controlled RC airplane and other models

12.20€  Inc Tax
Per Page      1 - 30 of 65