One Team

Digital voltage meter for 2-8 cell LiPo, LiFe, Li-ion batteries with adjustable low voltage audible signal (buzzer/alarm) (2.70-3.80V). Also offers 4-15 V voltage measurement for NiXX batteries.

BETA 1400 (brushless motor) Mode 2 - RTF with RadioLink T8FB 2.4GHz FHSS Transmitter

Great beginner RC model with included transmitter!

Almost finished RC motor glider model. Made of almost indestructible extruded foam polypropylene (EPP).

Controls:
Rudder, Elevator and Ailerons

Specification:
Wingspan: 1420mm
Length: 940mm
Weight: 650-720g


Comes as a complete RC Set with airplane including all electronics, transmitter, receiver, battery and charger.

BETA 1400 ARF (almost ready to fly with brushless motor)

Great beginner radio control model airplane!

Almost finished motor glider made of almost indestructible extruded foam polypropylene (EPP). Takes only few minutes to complete the kit. 

Controls:
Rudder, Elevator and Ailerons

Specification:
Wingspan: 1420mm
Length: 940mm
Weight: 650-720g

Box content:
1x Beta 1400 ARF
1x brushless motor with propeller
1x ECS (electronic speed controller)
4x servos

Required for assembly:
1x Flight battery (LiPo 3S 1300 - 2200mAh)
1x Transmitter
1x Receiver
1x Battery charger

Heat Shrink Tube 4mm

Red and black
Length: 25cm each

4mm gold (banana) charging cable for LiPo and other batteries with XT60 (male) connector.

AWG 14 silicone cable with 4mm gold (banana) connector - XT60 (male)

Use this adaptor / charging cable for charging the batteries for radio controlled (RC) airplanes, helicopters, cars, trucks, buggies, boats and other models and model accessories.

Power gold-plated connector 2.0 mm with short spring pin with max. load 30A (long-term 15A). For cables up to 0.8 mm2 (18AWG). Transition resistance 0.80 mOhm, max. 500 V.

Packaging: 10 pairs (red and black shrink tube included)

Use this connectors for radio controlled (RC) airplanes, helicopters, cars, trucks, buggies, boats and other models

Flat Y-lead servo extension cable (150mm)

Flat Y-cable cable with FUT connectors

Sealing Iron Sleeve

Can be used with Oracover and other covering films and foils

Two-pin power connector with gold-plated contacts with max. load capacity of 30A.

For cables with a cross-section of max. 0.8 mm2 (18 AWG)
Transition resistance 0.65 mOhm, max. 500V

Packaging: 1 pair.

Flat cable, three-core, in Futaba colors (black / red / white) with PVC insulation

Conductor cross-section 0.25 mm2
Highly flexible, 65 strands 0.07 mm
External dimensions 1.5x4.8 mm
Max. 48 V, 5A.

Made in Germany

Price per 1 meter

Flat extension lead / cable without connectors.

Use for radio controlled (RC) model airplanes, helicopters, cars, trucks, buggies, boats and other applications.

Two-pin battery connector

Packaging: 1 piece / BEC / JST connector

Use this connector for radio controlled (RC) airplanes, helicopters, cars, trucks, buggies, boats and other models

Tamiya Plug Silver (female)

XT60 charging cable for LiPo batteries, end tin plated (no connector on the other side)

AWG 14 silicone cable with XT60 connector (female)

Use this adaptor / charging cable for charging the batteries for radio controlled (RC) airplanes, helicopters, cars, trucks, buggies, boats and other models and model accessories.

4mm gold (banana) charging cable for LiPo and other batteries with XT90 (male) connector.

AWG 14 silicone cable with 4mm gold (banana) connector - XT90 (male)

Use this adaptor / charging cable for charging the batteries for radio controlled (RC) airplanes, helicopters, cars, trucks, buggies, boats and other models and model accessories.

Flat Y-lead servo extension cable (150mm)

Flat Y-cable cable with JR connectors

XT60 charging cable for LiPo and other batteries with Deans (T-plug) connector.

AWG 14 silicone cable with XT60 connector (female) - Deans/T-plug (male)

Use this adaptor / charging cable for charging the batteries for radio controlled (RC) airplanes, helicopters, cars, trucks, buggies, boats and other models and model accessories.

One Team Pushrod Connectors

Dimension: fits 1 mm pushrods
Pack content: 4 pieces

Pushrod coupler for radio controlled airplanes, boats and and other RC models.

Servo Lead Safety Clip

Package: 10 pieces

Secure servo connections on your (RC) radio controlled models.

Use this servo lead safety clip for secure connection between servo connectors on radio controlled (RC) airplanes, helicopters, drones, cars, buggies, trucks, crawlers and other models.

Pull-Pull control set with 1.0mm cable and M2 threaded cable coupler 

Pack content:
2x 1m steel wire (1mm dia.)
4x M2 cable coupler
4x ALU cable crimp
4x Shrink tube

Pull-Pull rudder control assembly for use in radio controlled (RC) airplanes, boats and and other models. 

Stone Fuel Filter

Fuel Filter for use with both petrol and glow fuel.

Dimensions:
ø 13 mm x length 52 mm
Fuel in/outlet ø 5.2mm

Use for radio controlled (RC) airplanes, helicopters, cars, trucks, buggies, boats and other models.

Servo Extension Cable (150mm)

Flat Extension cable with JR connectors (0.25mm2)

Receiver Battery Box for loose NiMh, NiCd cells

4xAA (4.8V)

For radio controlled cars, buggies and other models requiring 4AA (4.8V) power supply.

Servo Extension Cable

Length: 300mm

Flat Extension cable with JR connectors (0.25mm2)


Use for radio controlled (RC) airplanes, helicopters, cars, trucks, buggies, boats and other models.

MPX 8-pin high current connector

Package: 1 pair

High quality MPX 8-pin connector with gold-plated solder contacts.

Current rating:

• 6A / 24h
• 8A / 5min
• 10A / 3s

Use for quick wing assembly or attach to the fuselage for quick servo connection with the wings in radio controlled (RC) airplanes, helicopters, cars, trucks, buggies, boats and other models. It can be used together with solder board for easy wiring (8GR71294-1).

MPX MPX 6-pin connectors (5 pairs)

Servo connector - suitable for JR / Graupner with blue housing

Package: 1 piece crimp connector (female)

Use for radio controlled (RC) airplanes, helicopters, cars, trucks, buggies, boats and other models.

Plastic spinner for radio controlled airplane models for two-blade propeller.

Front mount
Colour: black
Size: 38mm

Gold-plated connector G6.0mm with segmented elastic pin.

Packaging: 1 pair

Use this connector for radio controlled (RC) airplanes, helicopters, cars, trucks, buggies, boats and other models

Propeller Drill Jig for GP61 / DLA 32 / 58


Use this tool for drilling mounting holes on propellers for radio controlled (RC) airplanes and other models

4mm gold (Banana) charging cable for LiPo batteries with MPX (Multiplex) connector - 300mm

Package: 4mm connectors (male) / MPX connector (male) / AWG 14 cable

Use this adaptor cable for charging the batteries for radio controlled (RC) airplanes, helicopters, cars, trucks, buggies, boats and other models.