Sort By:  
SkyRC Engine Heater (SK600066)
SkyRC Engine Heater

Fits all .19-.26 RC nitro engines
12V DC source with low voltage cutoff

The SKYRC engine heater uses technology similar to that used by Formula 1, Indy Car and NASCAR Teams! It will properly pre-heat your engine to 60-70°C in 10 minutes based on ambient temperature.

SKYRC engine heater will pre-heat all the critical parts of your nitro engine, giving you a minimal of stress and wear on the engine. It help relieve the stress on the crank, con-rod, piston and sleeve during warm-up. It also give you a very easy and smooth engine start, with no stress on your starter box. Fuel consumption is much less, as you do not have to spend time warming up and adjusting your engine. A pre-heated glow-plug will increase the life of your plug. It is also perfect for break-in, as it reduces the "pinch" on your new engine. You will experience that engine pre-heating is a must. Most importantly, it will quickly pay for itself by increasing engine life and performance!

MCU control heating time and heating power for maximum safety.
Safety timer: turn off power around 10 minutes automatically.
Built-in temperature sensor: to control the output power of the heater.
LED indicator for status of engine heater.
12V DC source with low voltage cutoff.
Fireproof and heat resistant adjustable cover.
Fits all .19-.26 RC nitro engines.
Very small, lightweight and compact for quick and easy storage.
It's designed to transfer heat effectively and efficiently.
Access port on top allows you to start and monitor your engines temperatures without having to take the heater off.

Input Voltage: 12V DC
Heating Power: 90W
Heating time: approx. 10 min
Low Voltage Cutoff: 9-10V
LED Indicator: Heating (red LED stays on), Low Voltage (red LED blinking)
Net Weight: 65g
Diameter: approx. 63mm
Height: approx. 50mm

29.28€  Inc Tax
SkyRC D100 v2 AC/DC Dual Charger 1-6s LiPo 10A 100W (SK100131)
SkyRC D100 V2

SkyRC D100 v2 is a twin‐channel charger with two independent circuits which can charge 2 different batteries (LiPo/ LiHV/ LiFe/ LiIon/ NiMH/ NiCd/ Pb) simultaneously. It is also capable of operating as a power supply with the maximum output of 100 watts helps the hobbyists to power the DC equipment. With its unprecedented function of voice guide, even a greenhand can use this charger without any hurdles. Mobile application of 11 languages comes with the useful “Scan to go” function.

Compatible with Various Batteries
With 2 independent circuits, it is capable of charging 2 batteries of various chemistries (LiPo/ LiFe/ LiIon/ LiHV/ NiMH/ NiCd/ Pb) at the same time.

Power Distribution
The charger supports power distribution between Channel A, Channel B and PSU within the total power of 100W in AC mode
DC Power supply
LiHV mode available
Re-peak mode for NiMH/NiCd battery
Two channels charge two different kinds of batteries simultaneously

Voice Guide
A speaker loaded with English guidance has been installed which makes the charger more user friendly and helps reducing mis‐operation.

LiHV Mode Available
The LiHV mode is able to charge the new generation of LiPo batteries with a maximum voltage of 4.35 V

DC Power Supply
Capable of supplying 100W DC power dramatically expands its usage scope. That is really convenient for drivers to power their DC devices, such as tire warmer, PIT light etc.

Create a QR Code
SkyRC D100 v2 features a unique function of SCAN TO GO. To fully experience that function, a QR code has to be created first inside the SkyCHARGER APP.

APP Control
Smart phone control & monitor via Buletooth 4.0 (both iOS and Android)

Charge Master 3 can start/stop process, and view real-time graphs of current, voltage, capacity and temperature, also monitor single cell voltage

AC Input Voltage: 100-240V
DC Input Voltag: 11-18V
Charge Wattage: AC 100W (Support Power Distribution) / DC 100W x 2
Discharge Wattage: 10W x 2
Charge Current: (0.1A-10.0A) x 2
Discharge Current: (0.1A-2.0A) x 2
DC Power Supply Output: 13.8V / max. 100W
Current Drian for Balancing Port: 300mA/cell
Trickle Charging Current: 50mA-300mA & OFF
LiPo/LiFe/Lilon/LiHV Battery Cell Count: 1-6S
NiMH/NiCd Battery Cell Count: 1-15S
Pb Battery Voltage: 2-20V

Length : 140mm
Width : 153mm
Height : 67mm

109.80€  Inc Tax
SkyRC e430 AC Charger for 2-4s LiPo 1-3A 30W (SK100107)
SkyRC e430 AC Charger

SkyRC e430 Charger is an economic, high-quality 100-240V AC balance charger, designed for charging LiPo and LiFe batteries from 2-4 cells in balance mode. The circuit power is 30W and max charge current can reach to 3A. There are three kinds of charge current 1A/2A/3A that can be selected. You could select the proper charge current according to battery capacity.

AC Input: 100-240V
Battery Type: LiPo/LiFe
Cell Count: 2-4 cells
Charge Current: 1A/2A/3A
Circuit Power: 30W
Current Drain for Balancing: 200mA
Weight: 193g

Length: 110.7mm
Width: 69.4mm
Height: 40.5mm

26.84€  Inc Tax
SkyRC GNSS Performance Analyzer GSM020 (3SK5023)
SkyRC GNSS Performance Analyzer GSM020

The SkyRC GNSS Performance Analyzer Bluetooth Speed Meter & Data Logger makes it easy to see who really is the fastest. Examine the performance before and after the modifications. Now, you can prove your RC car or plane is the fastest on earth! The app-enabled GNSS Performance Analyzer in an affordable, compact device that will give you a cutting edge to measure the overall performance of your model accurately. Use the free app on your iOS or Android device, strap the GNSS Analyzer to your car, and get real time updates of how fast you are really going.

The device is small at just 40x39x16mm, and weighs just 38 grams. Plus, an internal antenna allows easy mounting in any model.

  • Know your speed - before and after modifications - right on your phone.
  • Improved accuracy using two satellite constellations: GPS and GLONASS systems.
  • Small but Versatile: measure and analyze Acceleration, G-force, Speed, Time, Distance, Height and Vertical Velocity of your RC car, truck buggy, aircraft and other models.
  • Built-in LiPo Battery: 5 hours of operating time.
  • Go Mobile with the App: With the free GNSS PA App, drivers can track and monitor the speed of their model remotely from an Android or iOS device.
  • Drag Race: The GNSS PA App software automatically charts slope on as time elapses. Saved runs can be read by the App, allowing analyzing of average speed, maximum speed, and acceleration within the given time and defined distance. You can also define your own performance windows for measuring braking time, acceleration (e.g., 0-30 km/h, 10-50 km/h, 10 meters or any custom setting), G-force measurement, Max Speed, Average Speed, Distance, High and Vertical Velocity.
  • Track Race: The meter can also be used as a speedometer and provides accurate logging of speed data.
  • Flying Mode: The meter measures average speed, maximum speed, time elapsed, distance and altitude.
  • Built-in 1M Memory: The built-in 1M memory can record up to 50 records. And all the data can be transferred to the smartphone for analyzing! When the Flash is full, the previous record will be replaced automatically.

Satellite Reception: GPS & GLONASS
Receiver: L1, 1575.42 MHZ
Update Frequency: 10 Hz
Antenna Type: Built In
Satellite Signal Reception Sensitivity: -167dBm
Dimensions: 40x39x16mm
Weight: 35g
Operating Temperature: 0°C - +40°C
Storage Temperature: -10°C - +70°C
Operating Humidity: 5% - 90%

Use this accessory (GPS logger) for (RC) radio controlled cars, trucks, buggies, airplanes, helicopters, boats and other models.

79.91€  Inc Tax
SkyRC Temperature Sensor for SkyRC Charger (SK600040)
SkyRC Temperature Sensor for SkyRC Charger

9.76€  Inc Tax
SkyRC IMAX XH - Balance Board XH Adaptor (3SK602004)
SkyRC IMAX XH Balance Board XH Adaptor

Cell: 2-6S batteries
Connector: XH balance ports

Use this accessory for charging the batteries for radio controlled (RC) airplanes, helicopters, cars, trucks, buggies, boats and other models.

6.71€  Inc Tax
SkyRC e455 Multi Chemistry Charger 50W / 4A (SK100170-01)
SkyRC e455 50W / 4A

Multi Chemistry Charger
SkyRC e455 Charger is an economical, high-quality, universal 100-240V AC balance charger designed for charging LiPo, LiFe, and LiHV batteries from 2-4 cells in balance mode. It also can charge 6-8S NiMH batteries. The circuit power is 50W, and the max charge current can reach 4A.
Four kinds of charge current 1A/2A/3A/4A can be selected. You can choose the proper charge current according to the battery capacity.

Light touch button:
We put the brains of the classic E450 and reengineer body of with multiple-state button replacing the slide switch for better control experience e455 allows choosing battery type & charge current by pushing buttons. Even if it is your first programmable charger, you'll find using is a breeze: you should connect balance ports before charging LiPo/LiHV/LiHV battery.

Embedded XT60 Battery Connector
By embedding the XT60 battery connector, it gets more convenient & safe for charging the most popular battery with XT60 connectors and avoids any possibilities of reverse polarity.

Size and Weight
Case Material: Plastic
Case Size: 110x70x40mm
Weight: 191g

Other Parameters
AC Input: 100-240V
Battery Type: LiPo/LiFe/LiHV/NiMH
Cell Count: LiPo/LiFe/LiHV: 2-4S
NiMH: 6-8S
Charge Current: 1A/2A/3A/4A ± 10%
Cell Terminate Voltage:
LiPo 4.2V±0.02V
LiHV: 4.35V±0.02V
LiFe: 3.6V±0.02V
NiMH: - ΔVCircuit Power: 50W
Current Drain for Balancing: 300mA

Use this battery charger for radio controlled (RC) airplanes , helicopters, cars, buggies and truck models.

29.89€  Inc Tax
SkyRC XT60 Charging Cable for Deans (T-plug) Connector (SK600023-15)
SkyRC XT60 charging cable for LiPo battery with Deans (T-plug) connector

XT60 (female) and Deans (male)

4.27€  Inc Tax
SkyRC XT60 Charging Cable for EC5 Connector (SK600023-16)
SkyRC XT60 charging cable for LiPo battery with EC5 connector

XT60 (female) and EC5 (male)

4.88€  Inc Tax
SkyRC e3 LiPo (2-3s) Balance Charger (SK100081)
SkyRC e3 LiPo (2-3s) Balance Charger

SkyRC e3 AC balance charger is designed for 2‐3s LiPo battery. Its simpliness and low‐cost make it not only popular in RC world but also find its place in airsoft market.

AC Input: 100-240V
Battery Type: LiPo
Cell Count: 2-3 cells
Charge Current: 1.2A
Circuit Power: 11W
Weight: 103g

Length: 88mm
Width: 57mm
Height: 35mm

18.30€  Inc Tax
SkyRC BD250 Battery Discharger Analyzer (SK600133)
SkyRC BD250 Battery Discharger Analyzer

Battery Discharger & Analyzer

  • It displays real-time battery voltage, discharged capacity and discharge current.
  • It can test battery capacity that helps select batteries with the desired capacity.
  • It saves time when users wish to store their large capacity batteries.
  • It helps activate the best performance of your batteries for competition.

Upgraded from BD200, BD250 is not only a powerful discharging device but also a precise measurement tool for battery capacity. It takes the guesswork out of choosing the good-performance battery for your application. BD250 offers a maximum of 250 Watts/35 Amps to discharge your battery and will test virtually any battery type or size, any chemistry cells. It's stylish but small with a high-performance cooling system and uses MOSFETS from the well-known IXYS, to make sure it can discharge at 250 watts continuously.

Breakthrough Cooling System
A unibody and larger fan pushes air downward through an extruded aluminum heat sink. As air passes vertically through the heat sink, it absorbs heat and carries it out. Due to cooling efficiency, BD250 can discharge at 250 Watts continuously.

Simple and Intuitive Operation
Simple Operation with the Rotary Dial. Digital LED Display provide clear information.

Test virtually any type, size and chemistry battery
BD250 is a voltage oriented discharger, virtually any type of battery can be operated. Accepted voltage ranges from 5.40V to 35.00V.

  • 2-8S LiPo LiFe LiHv
  • 6-23S NiMH NiCd
  • 6-32V Pb(Lead Acid)

After the discharge process completes, rotate the button to view the real-time battery voltage every 30 seconds for the first six minutes. At certain intervals, the slower the voltage reduces during discharge, the better the battery performances. This feature can help to select a good-performance battery for your race or flight.

With PC software connected, BD250 allows you to export the battery voltage value at 30 seconds intervals (for the first six minutes).

The BD250 is a powerful discharging device that allows the user to discharge a battery at up to 35 amps or 250 watts and also measures and compares the performance of batteries. BD250 allows for the precise measurement of battery capacity and takes the guesswork out of choosing the best battery for your application.

Size and Weight
Dimension: 136.6x104.8x107mm
Weight: 879g

Accepted Voltage Range: 5.40-35.00V
Low Voltage Alert: <5.2V
High Voltage Alert: >35V Max.
Discharge Power: 250W

Discharge Current Range: 0.01A-35.00A
Discharge Power: 250W

Current Consumption in Sleep Mode: <100uA
Capacity Display Accuracy: ±3%

Current Display Accuracy
0.01-10.00A ±60mA
10-30A ±3%

Voltage Display Accuracy
5.4-10V <80mV
10-20V <120mV
20-35V <160mV

92.11€  Inc Tax
SkyRC GNSS Speed and Alt Meter (SK500024-01)
SkyRC GSM-015 GNSS Speed and Altitude Meter

Stop wondering how fast your RC car can run and how high your RC Airplane or helicopter can fly. Now all these data come at your finger with the GNSS SPEED METER by SkyRC. This gadget is ideal for RC racing/flying and casual biking, driving and long journey.

Measure Top Speed, Average Speed and Top Altitude

The user could easily view the screen while working out data such as speed, altitude, total mileage/kilometer, longitude/latitude. It also records the top speed and top altitude for instant recall after the running and helps RC fans much to fine-tune their RC gadgets to achieve better performance.

Reception of GPS & GLONASS Satellites
GSM-015 supports GNSS (Global Navigation Satellite System) with GPS and GLONASS system that means more satellites are orbiting the earth. The advantage of this many satellites will improve positional accuracy by tracking two satellite constellations instead of just one (GPS).

Built-in 1M Memory & Update frequency up to 10Hz
Update frequency is selectable from 1Hz to 10Hz. The higher update frequency is, the more accurate data the user will get. The built-in memory is 1M and can keep recording for 18 hours at 1Hz update frequency. And all the data can be transferred to PC and Mac and shown on Bing Maps. When the Flash is full, the previous record will be replaced automatically. No need to think about clearing data all the time or worry about missing the critical tracking data, when the memory is full.

Support both Metric and Imperial system of Measurement
The Metric and Imperial systems can be switched easily at the user’s finger. Hold and press the MODE button to change.

It comes with a built-in rechargeable LiPo battery. The capacity is 200 mAh and the operating time is up to 150 minutes.

PC link for data logging & Bing Maps
The GNSS LOGGER software is compatible with Windows 7 and above or macOS 10.12 and above.

With GNSS LOGGER, the user could:
Transfer the log data to computer and show the track data on built-in globally accessible Bing Maps
Save the log data to computer
Change Metric and Imperial system of measurement
Change time zone
GNSS update rate selection
Firmware upgrade

79.30€  Inc Tax
SkyRC Dual Charging (Port) Balancer Board with XH adaptor (SK600071)
SkyRC Dual Charging (Port) Balancer Board with XH adapter

Cell: 2-8S LiPo
Connector: XT60 for battery / XH balance ports
Fuse: 2x 40A

25.01€  Inc Tax
SkyRC XT60 Charging Cable for EC3 Connector (SK600023-13)
SkyRC XT60 charging cable for LiPo battery with EC3 connector

XT60 (female) and EC3 (male)

4.27€  Inc Tax
SkyRC Steering / Drift Gyro GC401 - (3 drive modes) (SK600068-02)
The SkyRC GC-401 RC Car Gyro is a device using sensors to adjust steering output, providing you with a more stable and controllable driving experience through the corners and precision turns.

GC-401 Three Sensor Drive Modes
GC401 introduces three drive modes, which are selectable by pushing the button:

L-DRIVE: More flexible and good for short distance and curved track
S-DRIVE: Standard mode
H-DRIVE: High curve, suitable for slipping and long straight distance track

Ultra-small Size & Lightweight
GC-401 gyro is leading the industry with a 21x21x11mm size and a weight of 3.6g. It can be easily mounted on all types of RC vehicles.
Correction of RC Vehicle Steering
GC-401 allows the racing car to travel in the specified direction and provides more accurate, stable, and more controllable steering at high speed.

Gyro Sensor: Vibration Structure Gyro
Operating Voltage: 4-8.4V
Current Drain: 25mA
Operating Temperature Range: -10C to +45C
Weight: 3.6g
Length 21mm
Width 21mm
Height 11mm

25.62€  Inc Tax
SkyRC NC1500 AA/AAA Battery Charger & Analyzer (SK100154)
SkyRC NC1500 AA/AAA Battery Charger & Analyzer

What matters during the charging process, especially for AA/AAA NiMH battery charging? No doubt, accuracy and safety! The creation of NC1500 not only arises out of the need but also from the desire to have a simple but safe and accurate charger for the battery. NC1500 has four independent slots and supports AA/AAA NiMH batteries, offers a maximum charge rate of 1500mA.

Four Independent Slot
1-4 pcs of NiMH AA, or AAA can be charged at the same time in any combinations.

3 Working Modes
Charge Mode
Discharge Mode
Battery Refresh MODE

Battery Internal Resistance Detection & Advanced Safety Features 
*At the start of a program, the device always performs a quick standard test first in order to determine the internal battery resistance. Aged or poor condition batteries have a higher IR and therefore heat up more during charge or discharge. The values are estimates and will vary depending on the state of the batteries and operation environment.

Convenient Operation
Powered by smartphone charger, any standard USB adaptor, power banks, and car chargers.

Rugged Durability and Pocket-size

Charging Time with Various Charging Current
Charge time is a guide only. Timing may differ according to brands/mAh capacity and environment conditions at the time of charge.

USB Input Power: 5V/2.1A
Trickle Current: 50mA
Operating Temperature: 0 ~ 45 ℃
Charge Current: 200mA / 500mA / 700mA / 1000mA / 1500mA
Discharge Current: 100mA / 250mA / 350mA / 500mA / 650mA
Max Charging Capacity: 3000 mAh
Weight: 106g
Size: 108*73*28mm

29.89€  Inc Tax
SkyRC B6 Nano Smart DC Charger for 1-6s LiPo (1-15s NiMh) 15A 320W (SK100134)
SkyRC Smart B6 nano Charger
The stronger aspiration to develop a better charger for hobbyists is the creation source of B6 nano. In the premise of artistic product design, internal Bluetooth module confers B6 nano on its ability to be controlled by APP. With B6 nano, charging becomes faster and more pleasant.

Capacitive Touch Button
B6 nano adpots touch button, advantages of which are sturdy and durable, quick-responsive and easy operative.Charging is no more rigid.

Powerful, Tiny, Smart, that is it!
B6 nano is highly optimized in firmware and structure, while monster power is delivered from such a tiny body. Black screen and touch button contribute to better overall experience on visualization and portability.

Powerful and High Speed Micro Controller
ARM® Cortex®-M4F 32 bits high speed processor, data process capability improves 20 times. Using industry leading 2.5V-5.5V wide range input voltage, has strong anti-interference ability.

Smart & Efficient Cooling System
Temperature controlled 16000rpm high speed sleeve bearing cooling fan effectively blows the air through the extruded aluminum heat sink, effectively cooling the device.

No more scrolling through complex menu, what you see is what you need.
Large black screen, active visual size is 50*37.5mm, all information at a glance.

The innovative Bluetooth Smart technology makes controlling your charger a breeze with your smartphones.

Intuitive Android & iOS application

Upgrading is a breeze
With Over The Air (OTA) update capability we can wireless delivery of new firmware to your charger through mobile phones.

B6 nano Specification
This product is suitable for charging and discharging of LiFe/ Lilon/ LiPo/ LiHV/ NiMH/ NiCd/ PB batteries. It has protection functions such as input high and low voltage protection and reverse input and output reverse polarity protection.

Size and Weight
Case Material: Plastic
Case Size: 76x85x37mm
Weight: 130g

Display Type: LCD
Reading Voltage Range: 0.1-26.1V/cell

Buttons And Port
External Port: 2-6S Balance Socket-XH,Battery Socket, DC Input
Controls: Three buttons

DC Input Voltage: 9-32V
Charge Wattage: 320W
Discharge Wattage: 5W

Battery Types/Cells
NiMH/NiCd: 1-15cells

Battery Capacity Range
Pb: 100-50000mAh

Charge Voltage
NiMH/NiCd: Delta peak detection
LiPo: 4.18-4.25V/cell
LiFe: 3.58-3.7V/cell
LiIon: 4.08-4.2V/cell
LiHV: 4.25-4.35V/cell

Discharge Cut-off Voltage
LiIon: 2.9-3.2V/cell
LiHV: 3.1-3.4V/cell

Charge Current: 0.1A-15.0A
Discharge Current: 0.1A-3.0A
Balance Cells: 2-6 cells
Balance Current: 1000mA/cell Max
Safety Timer: 1-720minutes off

Charge Method
CC/CV for lithium types and lead(Pb) batteries Delta-peak Sensitivity for NiMH/NiCd.

Free App
Smart Phone Control (both iOS and Android) The free SkyCharger App unleashes tons of features and advanced settings, which tremendously expands the user experience of B6 nano

Supports 11 Languages
Simplified Chinese, Traditional Chinese, English, Japanese, Spanish, Swedish, Polish, French, Czech, Italian, German, Bokmal Norwegian

Working and Storage
Operating temperature: 0℃-40℃
Working humidity: 0%-75%
Storage temperature: -10℃-70℃
Storage humidity: 0%-75%

59.78€  Inc Tax
SkyRC Power Supply 200W PSU 12V 17A (SK200025)
SkyRC 17A power supply converts standard household power 100-240V AC to 12V DC power and supplies up to 17A of continuous power.

Small in size, big on power
Though in a tiny body, PSU200W delivers over 93% power efficiency to provide enough power for RC hobbyists!


Safer and Reliable
Short-circuit protection on output
Over Current Protection
Over Temperature Protection
Over Load Protection
Over Voltage Protection
Generic XT60 Connector

Power supply with standard XT60 connector provides reverse polarity protection and secure super-solid connection!

Intelligent Air Cooling System
Thermal Controlled 8000rpm high-speed sleeve bearing cooling fan effectively blows the air through the extruded aluminum heat sink and effectively cooling the device.

Active PFC
Active PFC (power factor correction) refers to the method of increasing power factor (PF) by using active electronic circuits with feedback that control the shape of the drawn current, resulting in higher efficiency.

Universal Operation, Worldwide Safe
With the universal-voltage input circuit, you don't need hassle finding a voltage converter between 110V and 240V while traveling around!

Overload/Error Indication
The LED indicator turns off whenever the device connected to the Power Supply is drawing more power than it can provide. The power supply will shut down its output to protect its circuitry from damage, then reset automatically.

Box Content
Power Supply
Input Power Lead with EU Plug

59.17€  Inc Tax
SkyRC XT60 Charging Cable for 2S Battery (4mm and 5mm) (SK600023-14)
SkyRC XT60 Charging Cable for 2S Lipo Battery (4mm and 5mm)

4 and 5mm gold connectors

6.10€  Inc Tax
SkyRC eFuel 380W 16A 24V Power Supply (SK200023)
SkyRC eFuel 380W 16A 24V Power Supply Unit

Built for most demanding pocket charger 
Converts standard household power 100-240V AC to 24V DC power and supply up to 16 amperes of continuous power.

Safer and Reliable
  • Short-circuit protection on output
  • Over Current Protection
  • Over Temperature Protection
  • Over Load Protection
  • Over Voltage Protection

Active PFC
Active PFC is the use of power electronics to change the waveform of current drawn by a load to improve the power factor, thus achieving the purpose of higher efficiency. Active PFC, which is integrated into SkyRC 380W/16A regulated power supply, can provide higher power utilization.

Intelligent Air Cooling System
Adopting the cooling system, the fan will be initiated automatically when operating temperature reaches 50 degree.

Overload/Error Indication
The LED indicator turn red whenever equipment connected to the Power Supply is drawing more power than it can provide. The Power Supply may shut down turning off its output in order to protect its circuitry from damage.

Rigorous testing, derived from the pursuit of quality
Each 380W power supply must experience dozens of more than the industry standard of critical testing. Each rigorous testing and every detailing are the reflections of SkyRC's concentration on products.

Converts standard household power 100-240V AC to 24V DC power and supply up to 16 amperes of continuous power.

Size and Weight
Case Size:165x139x59.5mm

Power Supply
Input AC Frequency:50-60Hz
Output Current:16A
Output Voltage:24V DC±0.5V
Output Voltage Ripple:<300mV
Power Efficiency:88%
Power Factor:>0.98

Current Overload Protection:17A ±1A
Over Temperature Protection:<80℃
Cooling Method: Cooling Fan 
Operating Temperature:0-40℃
Operating Humidity:0-90%

89.06€  Inc Tax
Per Page      1 - 20 of 20
  • 1