Align

Sort By:  
Align T-Rex 150X DFC Combo (RH15E06X)
• Brand new 150 GRS Flight Controller Unit. Set up and update the flight parameter settings via APP Interface.
• 6-axis Gyro - 3-axis gyroscope + 3-axis accelerometer using a superior ARM Cortex-M4 32-bits processor.
• Attitude Auto-level Mode & Rescue Mode.
• Brand new DFCS (Direct Flight Control System) Controller allows to control real time flight.
• BL Heli ESC allows faster motor feedback and precise flying performance.
• Integrates main motor & tail motor in a dual system output. Also it adopts a high-speed and powerful micro MCU processor, which features low-voltage, low-temperature, and lost and found protection.
• Built-in Receiver: Futaba S-FHSS 2.4GHz System.
• Compatible with Spektrum DSM2/DSMX, JR DSM2/DMSS satellite.
• Rigidity Main Frame.
• Fully metal CNC CCPM Swashplate.
• New tail motor plug mount makes maintenance easy.


Specifications


Length: 255mm
Height: 80mm
Main Blade Length: 120mm
Main Rotor Diameter: 271mm
Tail Rotor Diameter: 45mm
Motor Pinion Gear: 10T
Main Drive Gear: 78T
Weight (w/o Battery): 53g


Content


• 1x T-REX 150X DFC
• 2x Main Blade (1 Set)
• 1x Tail Blade
• 1x 150M Brushless Main Motor
• 1x 150MT Brushless Tail Motor
• 1x DS155 Digital Servo
• 2x DS150 Digital Servo
• 1x Remote Extension
• 1x 7.4V Li-Po 250mAh Li-Polymer Battery


Required for assembly


• 1x Transmitter (min. 6-CH, Futaba S-FHSS System compatible or Spektrum with Satellite)
• 1x Charger
198.86€  Inc Tax
Align T-rex 470LP Dominator Super Combo (RH47E02X)
Following the release of the T-REX 450L, which introduced an innovative design and came equipped with high-end electronic equipment. Aligns most anticipated helicopter release in 2016 the T-REX 470L is born. No matter whether you are a newcomer or a professional, the brand new T-REX 470L will give you the new flying feel again.

470EFL Main Rotor Head provides superior flight stability and offers a lower CG design to reduce flying resistance while providing a more rigid and fast rotor head response. To improve the strength and durability of the main and feathering shaft the 470 main shaft outer dimension was increased from 5mm to 6mm, while the feathering shaft outer dimension was increased from 4mm to 5mm. The 470L has adopt a high standard 1.2mm 3K carbon fiber main frame and a wider body design which increases the size of the battery compartment allowing the use of larger capacity battery. The 470L utilizes a high efficient belt drive assembly design with an innovative adjustable belt guide pulley, providing a convenient way to adjust the belt tension by releasing or tightening the screw. This screw is used to maintain optimal belt tension improving the life of the belt and lowering maintains costs. The landing skid is tilted 5 degrees forward to improve crashworthiness and makes T-REX 470L more avant-garde and dynamic.

The T-REX 470L is equipped with the large outer diameter 470MX motor (1800KV) which is highly efficient providing superior power, excellent torque, improved current draw, and a lower operating temperature which are excellent improvements as compared to the 460MX motor. The brand new DS450 digital cyclic servos and DS455 digital tail servo, support up to 8.4V, high voltage input, improving the servos torque and speed. The new RCE-BL50X brushless ESC with an internal BEC provides 5.0V to 8.4V which can be set based on servo specification. The new high-end electronics effectively enhance flight performance.

Specifications
Length: 755mm
Height: 210mm
Width: 108mm
Main Blade Length: 380mm
Main Rotor Diameter: 850mm
Tail Rotor Diameter: 181mm
Motor Pinion Gear: 11T
Main Drive Gear: 121T
Main Drive Pulley: 56T
Tail Drive Gear: 15T
Drive Gear Ratio: 11:1:3.73
Weight (w/o battery): 840g

Content
• 1x Align T-Rex 470LP Dominator Kit
• 2x 380 Carbon Fiber Blade
• 2x 69 Carbon Tail Blade
• 1x RCE-BL50X 50A Brushless ESC
• 1x 470MX Brushless Motor (1800KV)
• 3x DS450 Digital Servo
• 1x DS455 Digital Servo
• 1x MICROBEAST Plus Flybarless System

Required for assembly
• 1x Transmitter (6-channel or more, helicopter system)
• 1x Receiver (6-channel or more)
• 1x Pitch gauge or Digital Pitch Gauge
• 1x Battery 6S 22.2V LiPo 1250~1900mAh


429.44€  Inc Tax
Align T-rex 470LM Dominator - KIT (RH47E06X)
Following the release of the T-REX 450L, which introduced an innovative design and came equipped with high-end electronic equipment. Aligns most anticipated helicopter release the T-REX 470L is born. No matter whether you are a newcomer or a professional, the brand new T-REX 470L will give you the new flying feel again.

470EFL Main Rotor Head provides superior flight stability and offers a lower CG design to reduce flying resistance while providing a more rigid and fast rotor head response. To improve the strength and durability of the main and feathering shaft the 470 main shaft outer dimension was increased from 5mm to 6mm, while the feathering shaft outer dimension was increased from 4mm to 5mm. The 470L has adopt a high standard 1.2mm 3K carbon fiber main frame and a wider body design which increases the size of the battery compartment allowing the use of larger capacity battery. The 470L utilizes a high efficient belt drive assembly design with an innovative adjustable belt guide pulley, providing a convenient way to adjust the belt tension by releasing or tightening the screw. This screw is used to maintain optimal belt tension improving the life of the belt and lowering maintains costs. The landing skid is tilted 5 degrees forward to improve crashworthiness and makes T-REX 470L more avant-garde and dynamic.

The T-REX 470L is equipped with the large outer diameter 470MX motor (1800KV) which is highly efficient providing superior power, excellent torque, improved current draw, and a lower operating temperature which are excellent improvements as compared to the 460MX motor.


Specifications


Length: 755mm
Height: 210mm
Width: 108mm
Main Blade Length: 380mm
Main Rotor Diameter: 850mm
Tail Rotor Diameter: 181mm
Motor Pinion Gear: 11T
Main Drive Gear: 121T
Main Drive Pulley: 56T
Tail Drive Gear: 15T
Drive Gear Ratio: 11:1:3.73
Weight (w/o battery): 860g


Content


• 1x T-REX 470L Dominator Kit
• 2x 380mm Carbon Fiber Blade
• 2x 69mm Carbon Tail Blade
• 1x 470MX Brushless Motor (1800KV)
• 1x RCE-BL50X 50A Brushless ESC


Required for assembly


• 1x Transmitter (6-channel or more, helicopter system)
• 1x Receiver (6-channel or more)
• 1x Pitch gauge or Digital Pitch Gauge
• 1x Flight battery 6S LiPo 1400~1900mAh
• 1x 3x Swashplate Servo
• 1x Tail Servo
• 1x Flybarless System

Note: T-REX 470L rudder servo must choose the stall torque greater than 2kg/cm (6.0V) and the motion speed smaller than 0.05sec/60° (6.0V). Too small torque or too slow servo will affect the tail authority.
279.99€  Inc Tax
Align T-rex 470LP Dominator - KIT (RH47E03X)
Following the release of the T-REX 450L, which introduced an innovative design and came equipped with high-end electronic equipment. Align's most anticipated helicopter release the T-REX 470L is born. No matter whether you are a newcomer or a professional, the brand new T-REX 470L will give you the new flying feel again.

470EFL Main Rotor Head provides superior flight stability and offers a lower CG design to reduce flying resistance while providing a more rigid and fast rotor head response. To improve the strength and durability of the main and feathering shaft the 470 main shaft outer dimension was increased from 5mm to 6mm, while the feathering shaft outer dimension was increased from 4mm to 5mm. The 470L has adopt a high standard 1.2mm 3K carbon fiber main frame and a wider body design which increases the size of the battery compartment allowing the use of larger capacity battery. The 470L utilizes a high efficient belt drive assembly design with an innovative adjustable belt guide pulley, providing a convenient way to adjust the belt tension by releasing or tightening the screw. This screw is used to maintain optimal belt tension improving the life of the belt and lowering maintains costs. The landing skid is tilted 5 degrees forward to improve crashworthiness and makes T-REX470L more avant-garde and dynamic.

The T-REX 470L is equipped with the large outer diameter 470MX motor (1800KV) which is highly efficient providing superior power, excellent torque, improved current draw, and a lower operating temperature which are excellent improvements as compared to the 460MX motor. The new RCE-BL50X brushless ESC with an internal BEC provides 5.0V to 8.4V which can be set based on servo specification. The new high-end electronics effectively enhance flight performance.


Specifications


Length: 755mm
Height: 210mm
Width: 108mm
Main Blade Length: 380mm
Main Rotor Diameter: 850mm
Tail Rotor Diameter: 181mm
Motor Pinion Gear: 11T
Main Drive Gear: 121T
Main Drive Pulley: 56T
Tail Drive Gear: 15T
Drive Gear Ratio: 11:1:3.73
Weight (w/o battery): 840g


Content


• 1x T-REX 470LP DOMINATOR Kit
• 2x 380mm Carbon Fiber Blade
• 2x 69mm Carbon Tail Blade
• 1x 470MX Brushless Motor (1800KV)
• 1x RCE-BL50X 50A Brushless ESC


Required for assembly


• 1x Transmitter (6-channel or more,helicopter system)
• 1x Receiver (6-channel or more)
• 1x Pitch gauge or Digital Pitch Gauge
• 1x 6S Li-Po 1400~1900mAh battery
• 1x Flybarless System
• 3x Swashplate Servo
• 1x Tail Servo


Note: T-REX 470L rudder servo must choose the stall torque greater than 2kg/cm (6.0V) and the motion speed smaller than 0.05sec/60° (6.0V). Too small torque or too slow servo will affect the tail authority.
229.97€  Inc Tax
Align T-Rex 150 Main Rotor Holder (H15H015XXT)
Instruction:
Use as a spare part for radio controlled helicopter model Align T-REX 150/150X

6061-T6 Aluminum alloy material and CNC processed
Must with 150 Main Shaft (H15H014XXT)

Specification:
150 Main rotor holder × 2
681ZZ-d2 Bearing × 4(Φ2xΦ6x2.6mm)
Socket button head collar screw × 2(#0-80x6.2mm)
Socket Button Head Screw × 2(#0-80x8mm)

17.08€  Inc Tax
Align T-Rex 150 Battery 2S1P 7.4V 300mAh/30C LiPo (HBP03001)
Instruction:
Use as a spare part for radio controlled helicopter model Align T-REX 150/150X

This Li-poly battery is using series/balancing design
Features high efficiency and high discharge rates
Max Continuous Discharge: 30C

Output: 7.4V 300mAh 2.22Wh (2S1P)
Support 5C charging
Dimension: 54x21.5x12mm
Weight: 18g

18.30€  Inc Tax
Align T-Rex 150 CH-150X LiPo Battery Charger (HEC15002)
Instruction:
Use as a spare part for radio controlled helicopter model Align T-REX 150/150X

Suitable for DC 11V~19V power input
Apply to 2S Li-polymer batteries
Equipped dual output function, it allows two batteries charging with 1A current in the same time.
Balance charging is good to prevent the situation of over-charging or under-charging for a single cell.
Auto-detected charge status display.
The auto-detected function of low voltage for power storage.
Reverse polarity protection and short circuit protection.

Specification:
Input Voltage: DC 11V~19V
Output Voltage: 2S DC 7.4V
Input current : Recommended 1.5A or more
Supported Battery Type: Li-polymer
Charging Current: 1A
Size: 71x49.5x21mm
Weight: Approx 42g

22.57€  Inc Tax
Align T-Rex 150X Brushless ESC (HEG15003)
Instruction:
Use as a spare part for radio controlled helicopter model Align T-REX 150/150X

Must use with 150 GRS (HEG15002)

Specification:
Main motor output current: Continuous 6A / Surge 7A
Tail motor output current: Continuous 3A / Surge 3.5A
BEC output current: Continuous 5V/2A / Surge 5V/2A
Persistent maximum current require optimal heat dissipation condition
Supported motor types: 2 poles to 18 poles brushless in/out runners
Maximum rotational speed: 2 poles-240000 RPM, 12 poles-40000 RPM
Input voltage: 2S Li-Po

31.72€  Inc Tax
Align T-Rex 150GRS Flybarless System (HEG15002)
Instruction:
Use as a spare part for radio controlled helicopter model Align T-REX 150/150X

6-axis Gyro:3-axis gyroscope + 3-axis accelerometer using a superior ARM Cortex-M4 32-bits processor. 3D feeling is superior while auto-level ability is also agile and stable.
Attitude Auto-level Mode:While there is no stick input for helicopter, the heli will auto-level and still keep at horizontal position, which is suitable for beginners.
Rescue Mode:While wrong stick input is given or heli is in trouble, or you are in panic, activate the rescue mode by flipping a switch on the radio to keep helis at a level position.
3D Flying:Brand new DFCS(Direct Flight Control System)Contorller allows to control real time flight. Strong Cortex-M4 Processor allows T-REX 150 to fly just like big scale helicopters.
Built-in Receiver:Futaba S-FHSS 2.4GHz System.
Plug-in Receiver(Required):Compatible with Spektrum DSM2/DSMX, JR DSM2/DMSS satellite
Must use with 150X Brushless ESC (HEG15003)

Specification:
Operating voltage range: 2S Li-Po
Operating current consumption: <100mA @ 5V
Rotational detection rate: 2000°/sec
Rudder yaw detection rate: 2000°/sec
Sensor resolution: 16BIT
Operating temperature: -20℃ ~ 65℃
Operating humidity: 0% ~ 95%
Swashplate Support : MODE H-1
Receiver Support : ALIGN / Futaba S-FHSS/ DSM2 / DSMX / DMSS
Transmit Distance: In open space without interference <150M

46.97€  Inc Tax
Align T-Rex 150GRS Flybarless System Set (Gyro + ESC) (HEG15004)
Instruction:
Use as a spare part for radio controlled helicopter model Align T-REX 150/150X

6-axis Gyro:3-axis gyroscope + 3-axis accelerometer using a superior ARM Cortex-M4 32-bits processor. 3D feeling is superior while auto-level ability is also agile and stable.
Attitude Auto-level Mode:While there is no stick input for helicopter, the heli will auto-level and still keep at horizontal position, which is suitable for beginners.
Rescue Mode:While wrong stick input is given or heli is in trouble, or you are in panic, activate the rescue mode by flipping a switch on the radio to keep helis at a level position.
3D Flying:Brand new DFCS(Direct Flight Control System)Contorller allows to control real time flight. Strong Cortex-M4 Processor allows T-REX 150 to fly just like big scale helicopters.
Built-in Receiver:Futaba S-FHSS 2.4GHz System.
Plug-in Receiver(Required):Compatible with Spektrum DSM2/DSMX, JR DSM2/DMSS satellite

Specification Flybarless:
Operating voltage range: 2S Li-Po
Operating current consumption: <100mA @ 5V
Rotational detection rate: 2000°/sec
Rudder yaw detection rate: 2000°/sec
Sensor resolution: 16BIT
Operating temperature: -20℃ ~ 65℃
Operating humidity: 0% ~ 95%
Swashplate Support : MODE H-1
Receiver Support : ALIGN / Futaba S-FHSS/ DSM2 / DSMX / DMSS
Transmit Distance: In open space without interference <150M

Specification ESC:
Main motor output current: Continuous 6A / Surge 7A
Tail motor output current: Continuous 3A / Surge 3.5A
BEC output current: Continuous 5V/2A / Surge 5V/2A
Persistent maximum current require optimal heat dissipation condition
Supported motor types: 2 poles to 18 poles brushless in/out runners
Maximum rotational speed: 2 poles-240000 RPM, 12 poles-40000 RPM
Input voltage: 2S Li-Po

69.54€  Inc Tax
Align T-Rex 150 Tail Motor Wire Set (HEP15003)
Instruction:
Use as a spare part for radio controlled helicopter model Align T-REX 150/150X

150 Tail Motor Wire x 2

8.54€  Inc Tax
Align T-Rex 150GRS Double Sided Tape (HEP15004)
Instruction:
Use as a spare part for radio controlled helicopter model Align T-REX 150/150X

150GRS Double Sided Tape A × 2(26x18x1mm)
150GRS Double Sided Tape B × 2(26x18x2mm)

6.10€  Inc Tax
Align T-Rex 150 DS150/155 Servo Horn Set (HSP15003)
Instruction:
Use as a spare part for radio controlled helicopter model Align T-REX 150/150X

Servo Horn x 6
Socket button head self tapping screw x 6(T1.5x3mm)

5.49€  Inc Tax
Align T-Rex 150 Feathering Shaft (H15H004XXT)
Instruction:
Use as a spare part for radio controlled helicopter model Align T-REX 150/150X

Stainless steel material. This high strength and high rigidity characteristics.

150 Feathering shaft x 3 (Φ2x16.5mm)
Socket Button Head Screw x 6 (#0-80x3mm)
Spacer x 6 (Φ1.6x3.2x0.2mm)

6.10€  Inc Tax
Align T-Rex 150 Head Damper (H15H011XXT)
Instruction:
Use as a spare part for radio controlled helicopter model Align T-REX 150/150X

Washer x 2 (Φ2xΦ3.6x0.2mm)
150 Head Damper x 8 (Φ2xΦ4x1.3mm)

4.88€  Inc Tax
Align T-Rex 150 Linkage Rod Set (H15H003AXT)
Instruction:
Use as a spare part for radio controlled helicopter model Align T-REX 150/150X

150 DFC Main rotor grip arm integrated control link x 4
150 DFC Main rotor grip linkage bearing sleeve × 4
100 Spacer × 4 (Φ1.6x3.2x0.2mm)
Socket Button Head Screw × 4 (#0-80x8mm)
150 Ball link A x 4 (Φ2.1x13.3x2mm)
150 Ball link B x 2 (Φ2.1x10.5x2mm)
φ2.1 Linkage Ball A x 2 (M1.2x1.3)
φ2.1 Linkage Ball A x 3 (T1.2x2)
150 Linkage Ball B x 3 (M1.2x1.6)

7.93€  Inc Tax
Align T-Rex 150 Main Drive Gear 78T (H15G001XXT)
Instruction:
Use as a spare part for radio controlled helicopter model Align T-REX 100S/100X/150/150X

Brand new design of 78T main gear for T-REX 150, features solid structure and increased gear torsion/strength to avoid deformation under the high speed rotation.

Main Drive Gear/78T x 2 (M0.3/78T)

7.93€  Inc Tax
Align T-Rex Bearing (681ZZ-d2) (H15R001XXT)
Instruction:
Use as a spare part for radio controlled helicopter model Align T-REX 150/150X

Use for 150 Main Rotor Holder (H15H002XXT).

Specification:
Bearing 681ZZ-d2 x 8 (Φ2xΦ4.5x2mm)

7.93€  Inc Tax
Align T-Rex 150M Main Motor Set (HML15M03)
Instruction:
Use as a spare part for radio controlled helicopter model Align T-REX 150/150X

Specification:
Input voltage: 2S
KV value: 9000KV
Stator Dimension: 1107
Stator Arms: 9
Magnet Poles: 6
Dimension: 1.5x13.7x21mm
Weight: 6.5g

23.18€  Inc Tax
Align T-Rex 150MT Tail Motor Assembly (HML15M02A)
Instruction:
Use as a spare part for radio controlled helicopter model Align T-REX 150/150X

Specification:
Input voltage: 2S
KV value: 8000KV
Stator Dimension: 1103
Stator Arms: 9
Magnet Poles: 6
Dimension: 1.4x13.2x18.1mm
Weight: 3.3g

23.18€  Inc Tax
Align T-Rex 150 Metal Tail Motor Mount (H15T003XXT)
Instruction:
Use as a spare part for radio controlled helicopter model Align T-REX 150/150X

Brand new CNC metal tail motor mount which effectively increase the torsion strength of the tail motor mount and gives an attractive look to the tail is really a great add-on to your T-REX 150.

Specification:
150 Carbon Vertical Stabilizer (fin) x 1
150 Metal Tail Motor Mount x 1
150 Mount fixing plate x 1
Socket button head screw x 2 (#0-80)

12.20€  Inc Tax
Align T-Rex 150 Tail Motor Plug & Pin Set (HMP15M02)
Instruction:
Use as a spare part for radio controlled helicopter model Align T-REX 150/150X

Specification:
90° Pin Set x 3
Φ0.8 Heat shrink tube-Black (4mm) x 3
Φ0.8 Heat shrink tube-Red (4mm) x 3
Φ0.8 Heat shrink tube-Blue (4mm) x 3

7.32€  Inc Tax
Align T-Rex 150 Main Blade Balancer (HOT00010)
Instruction:
Use as a spare part for radio controlled helicopter model Align T-REX 150/150X

Designed specifically for balancing of micro helicopter main blades. Align introduced the brand new low resistance magnetic levitated main blade balancer, for precision balancing of helicopter main blades. Suitable for blades with main shaft diameter of 1.5mm and 2mm (T-Rex 150 and T-Rex 250).

Specification:
150 Main Blade Balancer x 1
Rod (Φ1.5mm)For T-REX 150 x 1
Rod (Φ2mm)For T-REX 250 x 1

14.64€  Inc Tax
Align T-Rex 150 Vertical Stabilizer (H15T001XXT)
Instruction:
Use as a spare part for radio controlled helicopter model Align T-REX 150/150X

Specification:
Vertical Stabilizer x 2

5.49€  Inc Tax
Align T-Rex 150 Spare Parts Pack (H15Z001XXT)
Instruction:
Use as a spare part for radio controlled helicopter model Align T-REX 150/150X

Specification:
Socket button head screw x 5 (#0-80x6.2mm)
Washer x 4 (Φ2xΦ3.6x0.2mm)
150 Head Damper x 2 (Φ2xΦ4x1.3mm)
Socket Button Head Screw x 5 (#0-80x3mm)
100 Spacer x 4 (Φ1.6xΦ3.2x0.2mm)
Socket button head screw x 4 (#0-80x8mm)
Φ2.1 Linkage ball A x 5 (Φ2.1x4.28mm)
Socket button head screw x 2 (M2x4mm)
Cross screw x 2 (T1.5x4mm)
150 Ball Link A x 2 (Φ2.1x13.3x2mm)
150 Ball Link B x 4 (Φ2.1x10.5x2mm)
150 Landing Skid Spacer x 4 (Φ1.5xΦ3x2mm)
Socket button head self tapping screw x 5 (T1.5x3mm)
Socket button head self tapping screw x 5 (T1.5x4mm)
Motor Pinion Gear 10T x 1
100 Canopy nut x 4
Strap x 5 (1.6x71mm)

7.32€  Inc Tax
Align T-Rex 150 Main Blade Holder (H15H007XXT)
Instruction:
Use as a spare part for radio controlled helicopter model Align T-REX 150/150X

Specification:
Main blade holder x 1

4.27€  Inc Tax
Align T-Rex 150 DS155 Digital Servo (HSD15501T)
Instruction:
Use as a spare part for radio controlled helicopter model Align T-REX 150/150X

4g digital micro servos are specially designed for T-REX 150 DFC. Feature increased control speed and precision thus giving the helicopter a bigger feel.

Specification:
Stall torque: 0.8kg.cm (5V)
Motion speed: 0.06 sec/60° (5V)
Rating voltage: DC 4.8-6V
Dimension: 19.8x8.4x23.3mm
Weight: 4.3g
1520μs standard band

17.08€  Inc Tax
Align T-Rex 150 DS150 Digital Servo (HSD15001T)
Instruction:
Use as a spare part for radio controlled helicopter model Align T-REX 150/150X

4g digital micro servos are specially designed for T-REX 150 DFC. Feature increased control speed and precision thus giving the helicopter a bigger feel.

Specification:
Stall torque: 0.8kg.cm (5V)
Motion speed: 0.06 sec/60° (5V)
Rating voltage: DC 4.8-6V
Dimension: 19.8x8.4x23.3mm
Weight: 4.3g
1520μs standard band

17.08€  Inc Tax
Align T-Rex 150X Painted Canopy (HC1515)
Instruction:
Use as a spare part for radio controlled helicopter model Align T-REX 150/150X

150X new oversized canopy keep T-REX 150X well balanced. A new material is very durable, vibration-proof and quiet

Specification:
150X Painted Canopy x 1
Canopy nut x 4

10.98€  Inc Tax
Align T-Rex 150 Carry Box-Yellow (H15Z003XXT)
Instruction:
Use as a spare part for radio controlled helicopter model Align T-REX 150/150X

Brand new 150 carry box is special designed for T-REX 150 helicopter. This attractive small box can be a storage for a helicopter and its necessary accessories which includes storage for 6 batteries, 3 hexagon screw drivers, 2 pair main blades, charger and a small parts box. With its transparence cover you can easily check its content without opening it. Must have storage box for your favorite T-REX 150 helicopter.

Specification:
150 Carry Box-Yellow x 1 (292x160x69mm)
1.3mm Hexagon screw driver (Blue/8.2g) x 2
0.9mm Hexagon screw driver (Red/8g) x 1
Parts box x 1 (78.5x60.9x21mm)
Weight: 530kg

27.45€  Inc Tax
Per Page      1 - 30 of 151