Slovenščina
OptiPower
6S 5000mAh 30C Lipo (OPR50006S)
- 5000mah 6S pack rated at 30C continuous, with a burst of 80C
- 12AWG Silicon wires and JST-XH balance connector
- 160mm x 44mm x 43mm
- Weight 713g +/-5g
12S 4000MAH 50C ULTRA LIPO (OPR400012S50)
- 4000mah 12S pack rated at 50C continuous, with a burst of 100C
- 10AWG Silicon wires and JST-XH balance connector
- 280mm x 46mm x 50mm
- Weight 1350 +/-5g
BEC Guard (OPRBG001)
- BEC Guard eliminates back EMF
- BEC Guard smooths the voltage output, eliminating voltage fluctuations which can reduce “brown outs” caused by momentary low BEC voltages
- Eliminates voltage spikes to receiver in excess of 10V
- Can eliminate over voltage up to 100V, thereafter shuts down protecting the radio equipment from over voltage.
- If used in conjunction with ULTRA GUARD, in the event of the over voltage hitting 100V and the subsequent shutdown the ULTRA GUARD would then take over and supply the backup power for safe retrieval of the model.
6S 1600mAh 30C Lipo (OPR16006S)
- 1600mah 6S pack rated at 30C continuous, with a burst of 80C
- 12AWG Silicon wires and JST-XH balance connector
- 108mm x 33mm x 34mm
- Weight 273g +/-
6S 2700mAh 30 / 80C Lipo (OPR27006S)
- 2700mah 6S pack rated at 30C continuous, with a burst of 80C
- 12AWG Silicon wires and JST-XH balance connector
- 108mm x 37mm x 40mm
- Weight 407g +/-5g
3S 2150MAH 50C ULTRA LIPO (OPR21503S50)
- 2150mah 3S pack rated at 50C continuous, with a burst of 100C
- 12AWG Silicon wires plus XT60 and JST-XH balance connector
- 106mm x 34mm x 23mm
- Weight 187g +/-5g
Optional LED Buffer Pack Indication System (OPRLED-K)
Optional LED device, these can be daisy chained for greater number and visibility if needed
Fits ULTRA-Guard 430
Optional LED device, these can be daisy chained for greater number and visibility if needed
Fits ULTRA-Guard 430
2S 3300mAh "SHORTY" Race Pack (Lipo) (OPR33002S100B)
- 3300mah 2S pack rated at 100C
- 1.5mm thick ABS case with Ultrasonic welding to all seams
- 1-2C recommended charge rate for maximum cycle life
- 3C Max charge rate, no performance gain past this point
- 4mm bullet connector
- Weight 147 +/-5g
2S 4000mAh "SHORTY" Race Pack (Lipo) (OPR 4000-B)
- 4000mah 2S pack rated at 60C
- 1.5mm thick ABS case with Ultrasonic welding to all seams
- 1C recommended charge rate for maximum cycle life
- 2C Max charge rate, no performance gain past this point
- 4mm bullet connector
- Weight 200 +/-5g
6S 3500mAh 35 / 90C Lipo (OPR35006S)
- 3500mah 6S pack rated at 35C continuous, with a burst of 90C
- 12AWG Silicon wires and JST-XH balance connector
- 138mm x 42mm x 44mm
- Weight 569g +/-5g
2S 8500mAh Race Pack (Lipo) (OPR85002S100B)
- 8500mah 2S pack rated at 100C
- 1.5mm thick ABS case with Ultrasonic welding to all seams
- 1-2C recommended charge rate for maximum cycle life
- 3C Max charge rate, no performance gain past this point
- 5mm bullet connector
- Weight 304 +/-5g
2S 5800mAh Race Pack (Lipo) (OPR58002S100B)
- 5800mah 2S pack rated at 100C
- 1.5mm thick ABS case with Ultrasonic welding to all seams
- 1-2C recommended charge rate for maximum cycle life
- 3C Max charge rate, no performance gain past this point
- 5mm bullet connector
- Weight 280 +/-5g
2S 7000mAh Race Pack (Lipo) (OPR 70002S-50B)
- 7000mah 2S pack rated at 100C
- 1.5mm thick ABS case with Ultrasonic welding to all seams
- 1C recommended charge rate for maximum cycle life
- 2C Max charge rate, no performance gain past this point
- 4mm bullet connector
- Weight 320 +/-5g
6S 5000MAH 50C ULTRA LIPO (OPR50006S-50)
- 5000mah 6S pack rated at 50C continuous, with a burst of 100C
- 10AWG Silicon wires and JST-XH balance connector
- 160mm x 43mm x 44mm
- Weight 726.4g +/-5g
Opti Race Pack Charge Lead - Red (OPR CLRD)
OPTI Charge Lead 2S 12awg 610mm + JST-XH3P 22AWG 660mm Balance Connector – Red
Connectors: 4mm gold connectors stepped to 5mm
Connectors: 4mm gold connectors stepped to 5mm
- 1