Align T-rex 700

Sort By:  
Align T-rex 700XN RC Helicopter Kit (Nitro) (RH70N12X)

How long have you not heard roaring sound of engine? How long have you not had passionate feelings? The new combination of innovation, steel, light weight and precision, the ultimate in perfect technology in one, that’s new generation T-REX 700XN.

T-REX 700XN adopts the new direct to swashplate servo design, compared with previous generation T-REX 700N double push-pull mode control, providing precise and fast control! With 700EFL Flybarless Rotor Head System utilize extreme low CG design, effectively reduces resistance during 3D maneouvers, increased flight responsiveness and precision. Designed to maintain a 90-degree symmetrical angle between the Rotor Grip Arms and Linkage Rods for superior and stable flight performance. Engineered Narrow Body Design efficiently decrease gear abrasion and frame deformation during flight. T-REX 700XN maintain the proper Center of Gravity CG, moving the engine forward allowed the fuel tank to be positioned in the centre of the main shaft to maintain consistent CG as the fuel level changes during flight.

The new steel alloy clutch liner is durable with temperature control avoiding the exploding clutch liner or breaking clutch housing, the lifetime is over 1000 flights. Receiver mount provides cable and wiring protection, easy to maintain and assemble by removing a few screws from the mainframe.

For electronic equipment, high voltage output: 6A 7.4V BEC with down / regulation system for stable power to the CCPM server channel for receivers and servos. Includes a built-in one-button push glow plug igniter eliminating the hassle of using traditional electric clip plug on igniters. Also increased external high-frequency filter capacitance to effectively reduce the interference generated by external noise; such as high-speed and high torque servos. The brand new DS820M/DS825M high voltage brushless servo and brushless motor for fast speed, high torque, and superior, efficient reaction time allows the Align 700XN precise, fast performance. The new CNC machined aluminium case design is aesthetically appealing while acting as a highly efficient heat sink.

The new generation of T-REX 700XN has a number of innovative design, detonating your inner soul and once again feeling the original passion!


Key features:
- New lightweight canopy made from glass fibre and carbon fibre
- Progressive lightweight landing skids, tilted 5° forwards
- Narrow frame design
- Direct connect servo design
- Main rotor grip arm and linkage rod connected at 90° for symmetry
- New easy maintenance receiver mount
- CNC metal reinforcement plate and brace - for torsional stiffness of the frames
- Single piece CNC engine mount
- Tail servo mounted across the width of the model
- Thicker tail boom braces (8mm)
- Latest tail rotor hub design with M4 bolts

Specification
  • Length: 1346mm
  • Height: 384mm
  • Width: 202mm
  • Main Blade Length: 700mm
  • Main Rotor Diameter: 1570mm
  • Tail Rotor Diameter: 281mm
  • Motor Drive Gear:13T
  • Main Drive Gear:107T
  • Autorotation Tail Drive Gear: 104T
  • Tail Drive Gear: 22T
  • Drive Gear Ratio: 8.23:1:4.73
  • Fuel Tank Capacity: 630cc.
  • Takeoff Weight: Approx. 4540g



Kit includes:
- T-Rex 700XN Dominator
- 700 Carbon fibre main blade set
- 106mm 3K Carbon fibre tail blade set
- BT6X 2 in 1 High Voltage regulator (NEW)


Required for assembly
• 1x Transmitter (7-channel or more, helicopter system)
• 1x Receiver (7-channel or more)
• 1x Engine starter
• 1x Flybarless system
• 1x Throttle Servo (Standard size)
• 3x Swashplate Servo (Standard size)
• 1x Tail Servo (Standard size)
• 1x Governor System (if not integrated in Flybarless System)
• 1x Digital pitch gauge
• 1x Fuel pump
• 1x Engine fuel
• 1x 90~105 Muffler
• 1x 90~105 Engine
• 1x Receiver battery



918.66€  Inc Tax
Align T-rex 700XN Dominator Super Combo (Nitro) (RH70N11X-SC)

How long have you not heard roaring sound of engine? How long have you not had passionate feelings? The new combination of innovation, steel, light weight and precision, the ultimate in perfect technology in one, that’s new generation T-REX 700XN.

T-REX 700XN adopts the new direct to swashplate servo design, compared with previous generation T-REX 700N double push-pull mode control, providing precise and fast control! With 700EFL Flybarless Rotor Head System utilize extreme low CG design, effectively reduces resistance during 3D maneouvers, increased flight responsiveness and precision. Designed to maintain a 90-degree symmetrical angle between the Rotor Grip Arms and Linkage Rods for superior and stable flight performance. Engineered Narrow Body Design efficiently decrease gear abrasion and frame deformation during flight. T-REX 700XN maintain the proper Center of Gravity CG, moving the engine forward allowed the fuel tank to be positioned in the centre of the main shaft to maintain consistent CG as the fuel level changes during flight.

The new steel alloy clutch liner is durable with temperature control avoiding the exploding clutch liner or breaking clutch housing, the lifetime is over 1000 flights. Receiver mount provides cable and wiring protection, easy to maintain and assemble by removing a few screws from the mainframe.

For electronic equipment, high voltage output: 6A 7.4V BEC with down / regulation system for stable power to the CCPM server channel for receivers and servos. Includes a built-in one-button push glow plug igniter eliminating the hassle of using traditional electric clip plug on igniters. Also increased external high-frequency filter capacitance to effectively reduce the interference generated by external noise; such as high-speed and high torque servos. The brand new DS820M/DS825M high voltage brushless servo and brushless motor for fast speed, high torque, and superior, efficient reaction time allows the Align 700XN precise, fast performance. The new CNC machined aluminium case design is aesthetically appealing while acting as a highly efficient heat sink.

The new generation of T-REX 700XN has a number of innovative design, detonating your inner soul and once again feeling the original passion!


Key features:
- New lightweight canopy made from glass fibre and carbon fibre
- Progressive lightweight landing skids, tilted 5° forwards
- Narrow frame design
- Direct connect servo design
- Main rotor grip arm and linkage rod connected at 90° for symmetry
- New easy maintenance receiver mount
- CNC metal reinforcement plate and brace - for torsional stiffness of the frames
- Single piece CNC engine mount
- Tail servo mounted across the width of the model
- Thicker tail boom braces (8mm)
- Latest tail rotor hub design with M4 bolts

Specification
  • Length: 1346mm
  • Height: 384mm
  • Width: 202mm
  • Main Blade Length: 700mm
  • Main Rotor Diameter: 1570mm
  • Tail Rotor Diameter: 281mm
  • Motor Drive Gear:13T
  • Main Drive Gear:107T
  • Autorotation Tail Drive Gear: 104T
  • Tail Drive Gear: 22T
  • Drive Gear Ratio: 8.23:1:4.73
  • Fuel Tank Capacity: 630cc.
  • Takeoff Weight: Approx. 4540g



Kit includes:
- T-Rex 700XN Dominator
- 700 Carbon fibre main blade set
- 106mm 3K Carbon fibre tail blade set
- 3x Align DS820M Swashplate Servo
- 1x Align DS825M Tail Servo
- 1x Align DS530 Throttle Servo
- BT6X 2 in 1 High Voltage regulator (NEW)
- MICROBEAST Plus Flybarless System
- BEASTX Governor Sensor


Required for assembly
• 1x Transmitter (7-channel or more, helicopter system)
• 1x Receiver (7-channel or more)
• 1x Engine starter
• 1x Digital pitch gauge
• 1x Fuel pump
• 1x Engine fuel
• 1x 90~105 Muffler
• 1x 90~105 Engine
• 1x Receiver battery



1,319.43€  Inc Tax
Align T-rex 700XN Dominator Combo (Nitro) (RH70N11X)

How long have you not heard roaring sound of engine? How long have you not had passionate feelings? The new combination of innovation, steel, light weight and precision, the ultimate in perfect technology in one, that’s new generation T-REX 700XN.

T-REX 700XN adopts the new direct to swashplate servo design, compared with previous generation T-REX 700N double push-pull mode control, providing precise and fast control! With 700EFL Flybarless Rotor Head System utilize extreme low CG design, effectively reduces resistance during 3D maneouvers, increased flight responsiveness and precision. Designed to maintain a 90-degree symmetrical angle between the Rotor Grip Arms and Linkage Rods for superior and stable flight performance. Engineered Narrow Body Design efficiently decrease gear abrasion and frame deformation during flight. T-REX 700XN maintain the proper Center of Gravity CG, moving the engine forward allowed the fuel tank to be positioned in the centre of the main shaft to maintain consistent CG as the fuel level changes during flight.

The new steel alloy clutch liner is durable with temperature control avoiding the exploding clutch liner or breaking clutch housing, the lifetime is over 1000 flights. Receiver mount provides cable and wiring protection, easy to maintain and assemble by removing a few screws from the mainframe.

For electronic equipment, high voltage output: 6A 7.4V BEC with down / regulation system for stable power to the CCPM server channel for receivers and servos. Includes a built-in one-button push glow plug igniter eliminating the hassle of using traditional electric clip plug on igniters. Also increased external high-frequency filter capacitance to effectively reduce the interference generated by external noise; such as high-speed and high torque servos. The brand new DS820M/DS825M high voltage brushless servo and brushless motor for fast speed, high torque, and superior, efficient reaction time allows the Align 700XN precise, fast performance. The new CNC machined aluminium case design is aesthetically appealing while acting as a highly efficient heat sink.

The new generation of T-REX 700XN has a number of innovative design, detonating your inner soul and once again feeling the original passion!


Key features:
- New lightweight canopy made from glass fibre and carbon fibre
- Progressive lightweight landing skids, tilted 5° forwards
- Narrow frame design
- Direct connect servo design
- Main rotor grip arm and linkage rod connected at 90° for symmetry
- New easy maintenance receiver mount
- CNC metal reinforcement plate and brace - for torsional stiffness of the frames
- Single piece CNC engine mount
- Tail servo mounted across the width of the model
- Thicker tail boom braces (8mm)
- Latest tail rotor hub design with M4 bolts

Specification
  • Length: 1346mm
  • Height: 384mm
  • Width: 202mm
  • Main Blade Length: 700mm
  • Main Rotor Diameter: 1570mm
  • Tail Rotor Diameter: 281mm
  • Motor Drive Gear:13T
  • Main Drive Gear:107T
  • Autorotation Tail Drive Gear: 104T
  • Tail Drive Gear: 22T
  • Drive Gear Ratio: 8.23:1:4.73
  • Fuel Tank Capacity: 630cc.
  • Takeoff Weight: Approx. 4540g



Kit includes:
- T-Rex 700XN Dominator
- 700 Carbon fibre main blade set
- 106mm 3K Carbon fibre tail blade set
- 3x Align DS820M Swashplate Servo
- 1x Align DS825M Tail Servo
- 1x Align DS530 Throttle Servo
- BT6X 2 in 1 High Voltage regulator (NEW)


Required for assembly
• 1x Transmitter (7-channel or more, helicopter system)
• 1x Receiver (7-channel or more)
• 1x Flybarless System (including governor)
• 1x Engine starter
• 1x Digital pitch gauge
• 1x Fuel pump
• 1x Engine fuel
• 1x 90~105 Muffler
• 1x 90~105 Engine
• 1x Receiver battery



1,239.52€  Inc Tax
Align T-rex 700N DFC Combo (Nitro) (RH70N07X)
Align T-Rex 700N was developed based on years of R&D experiences, with superior design and economical pricing that brought 700 class glow helis to the masses, enabling Align to achieve a brand new milestone.
Now to celebrate this achievement, Align improved upon the already excellent design and introduces the brand new T-Rex 700N DFC!
Similar to the rigid and light design of the original, the most recognizable feature of the T-Rex 700N DFC is its narrow profile, which creates the impression of solid and simplicity visual effect.

The DFC main rotor system provides more direct and faster control feedback.
The new M1 helical main gear and new style tail control assembly improves the main gear durability and tail locking performance.
Utilizes larger capacity fuel tank for larger displacement engines, increasing 3D flight duration.


Features
• Equipped with the low CG DFC rotor head, exhibits exhilarating 3D performance and unimaginable flight speed.
• 700DFC CCPM Metal Swashplate and metal main shaft bearing block.
• New style H-cross section electronics mounting platform for simplified installation of electronics.
• Precision CNC machined aluminum pieces including elevator servo mount.
• Equipped with new high strength cnc m1 helical main gear and tail drive bevel gear assembly, featuring reinforced overall gear structure and increased gear thickness, effectively improves gear′s anti torsion ability to prevent gear from deforming under extreme power,reducing gear wear and power loss.
• 3K carbon plate narrow frame design, simple yet highly rigid, making assembly and maintenance convenient.
• Utilizes larger capacity fuel tank for larger displacement engines, increasing 3D flight duration.
• Tailboom is extended by 15mm to support the use of 720mm main blades. When equipped with 105 or 120 class engine, there will be a noticeable increase in power and performance!
• High quality new tail gearbox design, combined with new dual point mounted tail pitch control assembly to minimize slops and increase rudder control precision.


Specifications
Length: 1361mm
Height: 385mm
Main Blade Length: 700mm
Main Rotor Diameter: 1582mm
Tail Blade Length: 115mm
Tail Rotor Diameter: 281mm
Engine Pinion Gear: 14T
Main Drive Gear: 112T
Autorotation Tail Drive Gear: 104T
Tail Drive Gear: 21T
Drive Gear Ratio: 8:1:4.95 (E:M:T)
Fuel Tank Capacity: 660cc
Weight (with Power System): approx. 4200g

Content
• 1x T-REX 700 Nitro DFC Kit
• 2x 700mm Carbon fiber Main blade
• 2x 115mm Carbon fiber Tail blade
• 2-in-1 BEC/Igniter Unit.
• 1x Microbeast Plus Flybarless System
• 1x Governor Sensor
• 1x Aluminum Tail Boom


Required for assembly

• 1x Transmitter (7-channel or more, helicopter system)
• 1x Receiver (7-channel or more)
• 1x Standard servo (for throttle)
• 3x Standard servo (for swashplate)
• 1x Standard servo (for rudder)
• 1x Engine starter
• 1x Digital pitch gauge
• 1x Fuel pump
• 1x Engine fuel
• 1x 90-120 Muffler
• 1x 90-120 Engine




849.12€  Inc Tax
Per Page      1 - 4 of 4
  • 1