Align helikopterji

Razvrsti po:  
Align T-rex 150X DFC Combo (RH15E06X)
• Brand new 150 GRS Flight Controller Unit. Set up and update the flight parameter settings via APP Interface.
• 6-axis Gyro - 3-axis gyroscope + 3-axis accelerometer using a superior ARM Cortex-M4 32-bits processor.
• Attitude Auto-level Mode & Rescue Mode.
• Brand new DFCS (Direct Flight Control System) Controller allows to control real time flight.
• BL Heli ESC allows faster motor feedback and precise flying performance.
• Integrates main motor & tail motor in a dual system output. Also it adopts a high-speed and powerful micro MCU processor, which features low-voltage, low-temperature, and lost and found protection.
• Built-in Receiver: Futaba S-FHSS 2.4GHz System.
• Compatible with Spektrum DSM2/DSMX, JR DSM2/DMSS satellite.
• Rigidity Main Frame.
• Fully metal CNC CCPM Swashplate.
• New tail motor plug mount makes maintenance easy.


Specifications


Length: 255mm
Height: 80mm
Main Blade Length: 120mm
Main Rotor Diameter: 271mm
Tail Rotor Diameter: 45mm
Motor Pinion Gear: 10T
Main Drive Gear: 78T
Weight (w/o Battery): 53g


Content


• 1x T-REX 150X DFC
• 2x Main Blade (1 Set)
• 1x Tail Blade
• 1x 150M Brushless Main Motor
• 1x 150MT Brushless Tail Motor
• 1x DS155 Digital Servo
• 2x DS150 Digital Servo
• 1x Remote Extension
• 1x 7.4V Li-Po 250mAh Li-Polymer Battery


Required for assembly


• 1x Transmitter (min. 6-CH, Futaba S-FHSS System compatible or Spektrum with Satellite)
• 1x Charger
198.86€  Cena z DDV
Align T-rex 150X DFC Super Combo (RH15E04X)
• Brand new 150 GRS Flight Controller Unit. Set up and update the flight parameter settings via APP Interface.
• 6-axis Gyro - 3-axis gyroscope + 3-axis accelerometer using a superior ARM Cortex-M4 32-bits processor.
• Attitude Auto-level Mode & Rescue Mode.
• Brand new DFCS (Direct Flight Control System) Controller allows to control real time flight.
• BL Heli ESC allows faster motor feedback and precise flying performance.
• Integrates main motor & tail motor in a dual system output. Also it adopts a high-speed and powerful micro MCU processor, which features low-voltage, low-temperature, and lost and found protection.
• Built-in Receiver: Futaba S-FHSS 2.4GHz System.
• Compatible with Spektrum DSM2/DSMX, JR DSM2/DMSS satellite.
• Rigidity Main Frame.
• Fully metal CNC CCPM Swashplate.
• New tail motor plug mount makes maintenance easy.


Specifications


Length: 255mm
Height: 80mm
Main Blade Length: 120mm
Main Rotor Diameter: 271mm
Tail Rotor Diameter: 45mm
Motor Pinion Gear: 10T
Main Drive Gear: 78T
Weight (w/o Battery): 53g


Content


• 1x T-REX 150X DFC
• 4x Main Blade (2 Sets)
• 1x Tail Blade
• 1x 150M Brushless Main Motor
• 1x 150MT Brushless Tail Motor
• 1x DS155 Digital Servo
• 2x DS150 Digital Servo
• 1x Bind Plug
• 1x Remote Extension
• 2x 7.4V Li-Po 250mAh Li-Polymer Battery
• 1x 150 Carry Box-Black (292x160x69mm)
• 2x 1.3mm Hexagon screw driver (Blue/8.2g)
• 1x 0.9mm Hexagon screw driver (Red/8g)
• 1x Parts box E (78.5x60.9x21mm)
• 1x Parts box A (52x40x12mm)
• 1x CH150 Li-Po Charger


Required for assembly


• 1x Transmitter (min. 6-CH, Futaba S-FHSS System compatible or Spektrum with Satellite)
259.86€  Cena z DDV
Align T-rex 470LP Dominator - KIT (RH47E03X)
Following the release of the T-REX 450L, which introduced an innovative design and came equipped with high-end electronic equipment. Align's most anticipated helicopter the T-REX 470L is born. No matter whether you are a newcomer or a professional, the brand new T-REX 470L will give you the new flying feel again.

470EFL Main Rotor Head provides superior flight stability and offers a lower CG design to reduce flying resistance while providing a more rigid and fast rotor head response. To improve the strength and durability of the main and feathering shaft the 470 main shaft outer dimension was increased from 5mm to 6mm, while the feathering shaft outer dimension was increased from 4mm to 5mm. The 470L has adopt a high standard 1.2mm 3K carbon fiber main frame and a wider body design which increases the size of the battery compartment allowing the use of larger capacity battery. The 470L utilizes a high efficient belt drive assembly design with an innovative adjustable belt guide pulley, providing a convenient way to adjust the belt tension by releasing or tightening the screw. This screw is used to maintain optimal belt tension improving the life of the belt and lowering maintains costs. The landing skid is tilted 5 degrees forward to improve crashworthiness and makes T-REX470L more avant-garde and dynamic.

The T-REX 470L is equipped with the large outer diameter 470MX motor (1800KV) which is highly efficient providing superior power, excellent torque, improved current draw, and a lower operating temperature which are excellent improvements as compared to the 460MX motor. The new RCE-BL50X brushless ESC with an internal BEC provides 5.0V to 8.4V which can be set based on servo specification. The new high-end electronics effectively enhance flight performance.


Specifications


Length: 755mm
Height: 210mm
Width: 108mm
Main Blade Length: 380mm
Main Rotor Diameter: 850mm
Tail Rotor Diameter: 181mm
Motor Pinion Gear: 11T
Main Drive Gear: 121T
Main Drive Pulley: 56T
Tail Drive Gear: 15T
Drive Gear Ratio: 11:1:3.73
Weight (w/o battery): 840g


Content


• 1x T-REX 470LP DOMINATOR Kit
• 2x 380mm Carbon Fiber Blade
• 2x 69mm Carbon Tail Blade
• 1x 470MX Brushless Motor (1800KV)
• 1x RCE-BL50X 50A Brushless ESC


Required for assembly


• 1x Transmitter (6-channel or more,helicopter system)
• 1x Receiver (6-channel or more)
• 1x Pitch gauge or Digital Pitch Gauge
• 1x 6S Li-Po 1400~1900mAh battery
• 1x Flybarless System
• 3x Swashplate Servo
• 1x Tail Servo


Note: T-REX 470L rudder servo must choose the stall torque greater than 2kg/cm (6.0V) and the motion speed smaller than 0.05sec/60° (6.0V). Too small torque or too slow servo will affect the tail authority.
219.60€  Cena z DDV
Align T-rex 470LM Dominator - KIT (RH47E06X)
Following the release of the T-REX 450L, which introduced an innovative design and came equipped with high-end electronic equipment. Aligns most anticipated helicopter release the T-REX 470L is born. No matter whether you are a newcomer or a professional, the brand new T-REX 470L will give you the new flying feel again.

470EFL Main Rotor Head provides superior flight stability and offers a lower CG design to reduce flying resistance while providing a more rigid and fast rotor head response. To improve the strength and durability of the main and feathering shaft the 470 main shaft outer dimension was increased from 5mm to 6mm, while the feathering shaft outer dimension was increased from 4mm to 5mm. The 470L has adopt a high standard 1.2mm 3K carbon fiber main frame and a wider body design which increases the size of the battery compartment allowing the use of larger capacity battery. The 470L utilizes a high efficient belt drive assembly design with an innovative adjustable belt guide pulley, providing a convenient way to adjust the belt tension by releasing or tightening the screw. This screw is used to maintain optimal belt tension improving the life of the belt and lowering maintains costs. The landing skid is tilted 5 degrees forward to improve crashworthiness and makes T-REX 470L more avant-garde and dynamic.

The T-REX 470L is equipped with the large outer diameter 470MX motor (1800KV) which is highly efficient providing superior power, excellent torque, improved current draw, and a lower operating temperature which are excellent improvements as compared to the 460MX motor.


Specifications


Length: 755mm
Height: 210mm
Width: 108mm
Main Blade Length: 380mm
Main Rotor Diameter: 850mm
Tail Rotor Diameter: 181mm
Motor Pinion Gear: 11T
Main Drive Gear: 121T
Main Drive Pulley: 56T
Tail Drive Gear: 15T
Drive Gear Ratio: 11:1:3.73
Weight (w/o battery): 860g


Content


• 1x T-REX 470L Dominator Kit
• 2x 380mm Carbon Fiber Blade
• 2x 69mm Carbon Tail Blade
• 1x 470MX Brushless Motor (1800KV)
• 1x RCE-BL50X 50A Brushless ESC


Required for assembly


• 1x Transmitter (6-channel or more, helicopter system)
• 1x Receiver (6-channel or more)
• 1x Pitch gauge or Digital Pitch Gauge
• 1x Flight battery 6S LiPo 1400~1900mAh
• 1x 3x Swashplate Servo
• 1x Tail Servo
• 1x Flybarless System


Note: T-REX 470L rudder servo must choose the stall torque greater than 2kg/cm (6.0V) and the motion speed smaller than 0.05sec/60° (6.0V). Too small torque or too slow servo will affect the tail authority.
267.18€  Cena z DDV
T-REX 600 Nitro DFC Super Combo (MB+) (RH60N04X)

Features


• Equipped with DFC flybarless head assembly, with extremely low CG design to minimize wind resistance, providing more direct and precise flight control response and higher top speed.
• Dual 3K carbon plate side frame design for ease of maintenance and resistance to torque induced flex.
• Additional radial bearing is added to the top of the main gear hub to ensure stable rotation, and eliminate jamming of one way bearing.
• Newly designed unibody stainless steel tail drive gear center mount, for more precise tail drive gear and higher tolerance.
• New high quality carbon rudder control rod assembly using 5mm carbon rod and metal connectors, resulting in improved rudder control precision.
• Brand new torque tube front and rear drive gear set, use utilizes newly developed, highest spec and superior anti-wear material to increase the overall strength and durability. Effectively minimize gear striping and crash damage.
• High quality new tail gearbox design, combined with new dual point mounted tail pitch control assembly to minimize slops and increase rudder control precision.
• Utilizes high efficient tail drive system.
• High speed rated thrust bearing in tail blade grips.
• High efficiency tail shaft drive design.
• Highly efficient lightened engine cooling fan, reducing engine load and improving cooling efficiency.
• Large diameter clutch system with unique installation method for good balance, minimal vibration, and effective power transfer.
• Forward mounted rudder servo to protect it from exhaust contamination.
• 95mm tail blades for sharp rudder response and excellent tail locking ability.
• Unique H cross section shaped electronic mounting platform for easy electronic mounting and protection.
• Large capacity 440CC fuel tank for up to 10 minutes of extreme 3D flights.
• Starting and clutch supporting point utilizes 10mm one way bearing.
• All up ready to fly dry weight is only 3200g (7lbs).
• Main fuel tank designed with fuel supply stabilization effect.
• Impact resistant fiberglass canopy with 3 point hook mounting system for ease of install/removal.
• Designed with concepts from large helicopter competitions, for the best static and dynamic flight performance.


Specifications


Length: 1160mm
Height: 357mm
Main Blade Length: 600mm
Main Rotor Diameter: 1350mm
Tail Rotor Diameter: 240mm
Engine Pinion Gear: 20T
Main Drive Gear: 170T
Autorotation Tail Drive Gear: 180T
Drive Gear Ratio (E:M:T): 8.5:1:4.5
Fuel Tank Capacity: 440ccm
Flying Weight Approx: 3200g


Content


• 1x T-REX 600N DFC Kit
• 1x MICROBEAST Plus Flybarless System
• 2x 600 3G Carbon Fiber Blade
• 2x 95 Carbon Tail Blades
• 3x DS615 Standard servo (Upper/Lower Plastic Servo Case)
• 1x DS655 Specialized servo (Upper/Lower Plastic Servo Case)
• 1x Govemor Sensor
• 1x B6T 2 In 1 Voltage Regulator


Required for assembly


• 1x Transmitter (7-channel or more, helicopter system)
• 1x Receiver (7-channel or more)
• 1x Standard servo (throttle)
• 1x Engine starter
• 1x Digital pitch gauge
• 1x Fuel pump
• 1x Engine fuel
• 1x 50~60 Muffler
• 1x 50~60 Engine
• 1x Receiver battery (2-3S LiPo 7,4V-11,1V 1800-2400mAh)
997.96€  Cena z DDV
Align T-Rex 300X Dominator COMBO (RH30E02X)
T-REX 300X, small but all-in-perfect. It adopts DFC rotor head unit, low CG and low wind resistance providing direct flight responses. The carbon fiber main frame is made of composite material and with reinforcement plate and brace assembly effectively enhancing structural intensity and torsion resistance. Narrow body design makes mechanical structure much stronger. The battery slider and top-mounted motor design with anodized bright red color brings pretty texture on this model. Thicken aluminum alloy tail boom for the best torsion resistance and increase the tail support rod lifetime. The progressive lightweight landing skid making this model the leader in this class. Plus the fiberglass painted canopy features lightweight and low in wind resistance.

T-REX 300X equipped with the standard high torque and high efficiency 300MX 3700KV/2216 brushless motor not only contributes to dramatic power increase, the high efficiency cooling system enables cooler operating temperature during and after flights when compared to motor of previous generation. Allow to provide consistent power output and keep stable RPM in non-stop 3D flying presenting perfect performance. Also it pairs with digital HV DS450 and DS455 servos, supporting 8.4V output, fast response and high torque. The new 25A brushless speed governor support 5~8.4V adjustable BEC voltage.

T-REX 300X is tiny but everything all-in-one so that can perform well in not only in-door show but also outdoor 3D flights. This model offers you the best bargain price allow you to have fun flying at any time.


Specifications

T-REX 300X
Length: 476mm
Height: 158mm
Width: 88mm
Main Blade Length: 230mm
Main Rotor Diameter: 525mm
Tail Rotor Diameter: 143mm
Motor Pinion Gear: 14T
Main Drive Gear: 115T
Main Drive Pulley: 40T
Tail Drive Gear: 13T
Drive Gear Ratio: 8.21:1:3.08
Weight (w/o battery): 418g


Content


• 1x T-REX 300X DOMINATOR Kit
• 2x 230 Carbon Fiber Blade
• 2x 50 Tail Blade
• 1x RCE-BL25A 25 Brushless ESC
• 1x 300MX Brushless Motor (3700KV/2216)
• 3x DS450 Digital servo
• 1x DS455 Digital servo


Required for assembly


• 1x Transmitter (min. 6-channels, helicopter system)
• 1x Receiver (min. 6-channels)
• 1x Flybarless System
• 1x Flight battery (3S 11,1V LiPo 1300mAh 30C)
• 1x Charger (for 3S LiPo)
348.92€  Cena z DDV
Align T-Rex 300X Dominator BEASTX Combo - PNP (RH30E02X-MBP)
T-REX 300X, small but all-in-perfect. It adopts DFC rotor head unit, low CG and low wind resistance providing direct flight responses. The carbon fiber main frame is made of composite material and with reinforcement plate and brace assembly effectively enhancing structural intensity and torsion resistance. Narrow body design makes mechanical structure much stronger. The battery slider and top-mounted motor design with anodized bright red color brings pretty texture on this model. Thicken aluminum alloy tail boom for the best torsion resistance and increase the tail support rod lifetime. The progressive lightweight landing skid making this model the leader in this class. Plus the fiberglass painted canopy features lightweight and low in wind resistance.

T-REX 300X equipped with the standard high torque and high efficiency 300MX 3700KV/2216 brushless motor not only contributes to dramatic power increase, the high efficiency cooling system enables cooler operating temperature during and after flights when compared to motor of previous generation. Allow to provide consistent power output and keep stable RPM in non-stop 3D flying presenting perfect performance. Also it pairs with digital HV DS450 and DS455 servos, supporting 8.4V output, fast response and high torque. The new 25A brushless speed governor support 5~8.4V adjustable BEC voltage.

T-REX 300X is tiny but everything all-in-one so that can perform well in not only in-door show but also outdoor 3D flights. This model offers you the best bargain price allow you to have fun flying at any time.


Specifications

T-REX 300X
Length: 476mm
Height: 158mm
Width: 88mm
Main Blade Length: 230mm
Main Rotor Diameter: 525mm
Tail Rotor Diameter: 143mm
Motor Pinion Gear: 14T
Main Drive Gear: 115T
Main Drive Pulley: 40T
Tail Drive Gear: 13T
Drive Gear Ratio: 8.21:1:3.08
Weight (w/o battery): 418g


Content


• 1x T-REX 300X DOMINATOR Kit
• 1x MICROBEAST Plus Flybarless System
• 2x 230 Carbon Fiber Blade
• 2x 50 Tail Blade
• 1x RCE-BL25A 25 Brushless ESC
• 1x 300MX Brushless Motor (3700KV/2216)
• 3x DS450 Digital servo
• 1x DS455 Digital servo


Required for assembly


• 1x Transmitter (min. 6-channels, helicopter system)
• 1x Receiver (min. 6-channels)
• 1x Flight battery (3S 11,1V LiPo 1300mAh 30C)
• 1x Charger (for 3S LiPo)
448.96€  Cena z DDV
Align T-Rex 300X Dominator SUPER Combo - RTF (RH30E01X)
Align newly designed T-REX 300X RTF (Ready to Fly), pre-assemble and combo with ALIGN A10 transmitter 10 channels 2.4GHz system and MiniGRS gyro makes flying much easier.

T-REX 300X, small but all-in-perfect. It adopts DFC rotor head unit, low CG and low wind resistance providing direct flight responses. The carbon fiber main frame is made of composite material and with reinforcement plate and brace assembly effectively enhancing structural intensity and torsion resistance. Narrow body design makes mechanical structure much stronger. The battery slider and top-mounted motor design with anodized bright red color brings pretty texture on this model. Thicken aluminum alloy tail boom for the best torsion resistance and increase the tail support rod lifetime. The progressive lightweight landing skid making this model the leader in this class. Plus the fiberglass painted canopy features lightweight and low in wind resistance.

T-REX 300X equipped with MiniGRS flybarless system special designed for ALIGN small helicopters (Under 500 series). It's light and simple with easy and quick settings, suitable for most pilots and beginners. Also the standard high torque and high efficiency 300MX 3700KV/2216 brushless motor not only contributes to dramatic power increase, the high efficiency cooling system enables cooler operating temperature during and after flights when compared to motor of previous generation. Allow to provide consistent power output and keep stable RPM in non-stop 3D flying presenting perfect performance. Also it pairs with digital HV DS450 and DS455 servos, supporting 8.4V output, fast response and high torque. The new 25A brushless speed governor support 5~8.4V adjustable BEC voltage.

T-REX 300X RTF is tiny but everything all-in-one so that can perform well in not only in-door show but also outdoor 3D flights. This model offers you the best bargain price allow you to have fun flying at any time.


Specifications

T-REX 300X
Length: 476mm
Height: 158mm
Width: 88mm
Main Blade Length: 230mm
Main Rotor Diameter: 525mm
Tail Rotor Diameter: 143mm
Motor Pinion Gear: 14T
Main Drive Gear: 115T
Main Drive Pulley: 40T
Tail Drive Gear: 13T
Drive Gear Ratio: 8.21:1:3.08
Weight (w/o battery): 418g


Specifications

A10 Transmitter
Channels: 10
Available Models: Helicopter / Airplane / Multicopter
Frequency range: 2.408 ~ 2.475 GHz
Power: no higher than 20dBm (for EU)
System Mode: AFHDS 2A
Suitable Voltage Range: 4.0 ~ 6.0V DC
Receiving Distance: the open ground no interference < 1000M
Low Voltate Warning: Lower than 4.2V
Weight: 485g (excluded battery)
Size: 275x187x102mm


Specifications

MiniA.BUS Receiver
Channel: 14 channels
RX Sensitivity: -105dBm
RF Range: 2.4055 ~ 2.475 GHz
System Mode: 2.4G system AFHDS 2A
Power: 4.0 ~ 8.4V DC
Transmit Distance: In open space without interference <150M


Specifications

MiniGRS Flybarless System
Operating voltage range: DC 3.5~8.4V
Operating current consumption: <100mA @ 4.8V
Rotational detection rate: ±300°/sec
Rudder yaw detection rate: ±600°/sec
Sensor resolution: 12 BIT
Swashplate Support: 120° CCPM Swashplate
Mode Support: T-REX 250, T-REX 300, T-REX 450, T-REX 470, T-REX 500
Receiver Support: ALIGN A.BUS, Futaba S-FHSS S.BUS, Spektrum DSM2/DSMX remote receiver
Operating temperature: -20℃ ~ 65℃
Operating humidity: 0% ~ 95%
Size: 37.6x22.4x13mm


Specifications

RCC-3X Charger
Input Voltage: AC 100V~240V (50/60Hz)
Output Voltage: 2cell DC 7.4V / 3cell DC 11.1V
Supported Battery Type: Li-polymer / Li-ion
Charging Method: CC/CV
Charging Current: 2A
Size: 123x74.3x32mm
Weight: 260g


Specifications

Battery
Output: 11.1V 1300mAh 14.4Wh (3S1P)
Supports 5C charging
Dimension: 74x36.5x21mm
Weight: 115g


Content


• 1x T-REX 300X DOMINATOR Kit
• 1x MiniGRS Flybarless System
• 2x 230 Carbon Fiber Blades
• 2x 50 Tail Blade
• 1x RCE-BL25A 25 Brushless ESC
• 1x 300MX Brushless Motor(3700KV/2216)
• 3x DS450 Digital servo
• 1x DS455 Digital servo
• 1x A10 Radio Control System Combo
• 1x MiniA.BUS Receiver
• 1x Balance Charger RCC-3SX
• 1x 3S1P 11.1V 1300mAh / 30C
528.26€  Cena z DDV
Align T-REX 500X Dominator Combo (DS530M/DS535M) (RH50E17X-C)
Brand New 500EFL Main Rotor Head Set
The brand new low CG 500EFL Flybarless Rotor Head System utilizes the precision grinding of high-carbon steel hollow shaft effectively increase its concentricity. Allow to reduce resistance during 3D maneuvers, increased flight reponsiveness and precision. In addition, the style appearance harmony with red anodized and stainless color, bring out the high quality just like 700 size 3D helicopter.

Quick release battery mounting plate
Brand new latching battery tray which utilizes integrated mounting rails inside the frame to simplify insertion / removal of battery while providing protection for the battery.

520MX Brushles Motor (1600KV / 3527)
New 520MX motor features high efficency, superior power, excellent torque, low current draw, and low operating temperature. Allow to provide maintaining consistent torqque and head speed through continuous 3D maneuvers.

New RCE-BL80X 80A Brushless ESC
Specially designed for T-REX 500X providing higher currency output and support for high voltage servos with an internal BEC output from 6V to 8.4V which can be set up based on servo specification.

Adjustable Belt Guide Pulley
Innovative adjustable belt guide pulley, allows a convienient way to adjust the belt tension by releasing or tightening the screw. The screw is used to maintain optimal belt tension over time.

Brand new Belt Drive Assembly
Brand new Belt Drive Assembly design allow for quiet operation and low cost on serviceability.

Special Qualified Washer
Advanced Aluminium CNC cutting manufactures, clean aesthetic perfectly exhibits the helicopters exclusiveness.

Brand New Tail Rotor Holder
The new Tail Rotor Holder design includes thrust bearings which increases durability, as well as significantly improving the accuracy and efficiency of tail performance when using 78 size Tail Blades.

470 Main Blade
New extended 470mm main blades for T-REX 500X effectively improve the flight stability and power performance. Enhance the power for better control allow to enjoy T-REX 500X flights same like other large size helicopters.

78 Tail Blade
New 78 size Tail Blades are longer in length and offer superior and precise tail holding performance, even during demanding 3D flight.

Progressive Lightweight Landing Skid
Landing Skid is tilted 5 degrees forward to improve crashworthiness.

500 Tail Boom
A 19mm wide Tail Boom to improves the torsional strength.

Carbon Fiber Tail Control Rod Assembly
Carbon Fiber Tail Control Rod is practical and improves the helicopters tail control.

Tail Control Unit
The newly designed dual point supported tail control assembly delivers slop free performance while improving rudder and precision.

New Swashplate (Gigh Stability & Zero Slop)
New Swashplate design with precise bearings features in zero slop delivering a precise and accurate controlled flight.

500 Slant Thread Main Drive Gear Set
Utilize of Strenghten main gear case features in using larger bearing has a higher load carry capacity which reduces the loss of momentum and improves the efficency, speed and smoothness of the main rotor. The new main gear case and all-metal central pulley transmission system is an efficent design to deliver the ultimate performance.

The 3rd Main Shaft Bearing Block
An additional 3rd main shaft bearing block increases the strength of the main frame while improving 3D flight.

1.6mm 3K Carbon Fiber Main Frame
Carbon fiber side frame plates are manufactured using proprietary composite material integration technology which integrates the battery mounting rails into the frame. This unique use of open space within the frame vreates a rigid frame and is aesthetically pleasing.

CNC Metal Shapely Reinforcement Plate And Brace Assembly
Brand new CNC metal reinforcement plate and brace compare with frame mounting bolt effectively increase the torsional strength of main frame, under extreme 3D maneuver, you can strongly feel its solid reinforcement from structure. In addition, the styling appearance harmony with red anodized and stainless color bring out the high tactile appeal.





Specifications

T-REX 500X
Length: 935mm
Height: 259mm
Width: 151mm
Main Blade Length: 470mm
Main Rotor Diameter: 1054mm
Tail Rotor Diameter: 219mm
Motor Drive Gear: 12T
Main Drive Gear: 134T
Main Drive Pulley: 80T
Tail Drive Gear: 21T
Drive Gear Ratio: 11.17:1:3.81
Weight (w/o power system): 1400g

Specifications

RCM-BL520MX
Input voltage: 22.2V (6S LiPo)
KV value: 1600
Continuous current: 85A
Surge current: 130A (2 sec)
Continuous Output power: 1900W
Surge Output power: 2750W (2 sec)
Stator dimension: 3527
Stator arms: 9
Magnet Poles: 6

Specifications

RCE-BL80X
Continuous current: 80A
Surge current: 100A
Supporting Input voltage: 7.4V ~ 22.2V
Supporting battery types: 2S ~ 6S LiPo/LiIon
BEC Output voltage: 2x 6V ~ 8.4V (Dual BEC)
BEC Output current: continuous 5A / surge 7A

Specifications

DS530M HV Digital Servo
Rating voltage: DC 6.0V - 8.4V
Temperature range: -20°C ~ +60°C
Stall torque: 6.5kg/cm @ 6.0V, 9.0kg/cm @ 8.4V
Motion Speed: 0.085sec/60° @ 6.0V, 0.065sec/60° @ 8.4V

Specifications

DS535M HV Digital Servo
Rating voltage: DC 6.0V - 8.4V
Temperature range: -20°C ~ +60°C
Stall torque: 5.0kg/cm @ 6.0V, 6.5kg/cm @ 8.4V
Motion Speed: 0.05sec/60° @ 6.0V, 0.035sec/60° @ 8.4V


Content

• 1x T-REX 500X Dominator Kit
• 1x 520MX Brushless Motor
• 1x BL80X Brushless ESC
• 2x 470mm Carbon Main Rotor Blade
• 2x 78mm Tail Rotor Blade
• 3x DS530M HV Digital Servo
• 1x DS535M HV Digital Servo


Required for assembly

• 1x Transmitter (7-channel or more, helicopter system)
• 1x Receiver (7-channel or more, suitable to Transmitter)
• 1x Flybarless System
• 1x Pitch gauge or Digital Pitch Gauge
• 1x Flight battery 6S Li-Po 2600 ~ 4600mAh (3300mAh suggestion)
• 1x LiPo Battery Charger
699.06€  Cena z DDV
Align T-REX 500X Dominator Super Combo (DS530M/DS535M) (RH50E17X)
Brand New 500EFL Main Rotor Head Set
The brand new low CG 500EFL Flybarless Rotor Head System utilizes the precision grinding of high-carbon steel hollow shaft effectively increase its concentricity. Allow to reduce resistance during 3D maneuvers, increased flight reponsiveness and precision. In addition, the style appearance harmony with red anodized and stainless color, bring out the high quality just like 700 size 3D helicopter.

Quick release battery mounting plate
Brand new latching battery tray which utilizes integrated mounting rails inside the frame to simplify insertion / removal of battery while providing protection for the battery.

520MX Brushles Motor (1600KV / 3527)
New 520MX motor features high efficency, superior power, excellent torque, low current draw, and low operating temperature. Allow to provide maintaining consistent torqque and head speed through continuous 3D maneuvers.

New RCE-BL80X 80A Brushless ESC
Specially designed for T-REX 500X providing higher currency output and support for high voltage servos with an internal BEC output from 6V to 8.4V which can be set up based on servo specification.

Adjustable Belt Guide Pulley
Innovative adjustable belt guide pulley, allows a convienient way to adjust the belt tension by releasing or tightening the screw. The screw is used to maintain optimal belt tension over time.

Brand new Belt Drive Assembly
Brand new Belt Drive Assembly design allow for quiet operation and low cost on serviceability.

Special Qualified Washer
Advanced Aluminium CNC cutting manufactures, clean aesthetic perfectly exhibits the helicopters exclusiveness.

Brand New Tail Rotor Holder
The new Tail Rotor Holder design includes thrust bearings which increases durability, as well as significantly improving the accuracy and efficiency of tail performance when using 78 size Tail Blades.

470 Main Blade
New extended 470mm main blades for T-REX 500X effectively improve the flight stability and power performance. Enhance the power for better control allow to enjoy T-REX 500X flights same like other large size helicopters.

78 Tail Blade
New 78 size Tail Blades are longer in length and offer superior and precise tail holding performance, even during demanding 3D flight.

Progressive Lightweight Landing Skid
Landing Skid is tilted 5 degrees forward to improve crashworthiness.

500 Tail Boom
A 19mm wide Tail Boom to improves the torsional strength.

Carbon Fiber Tail Control Rod Assembly
Carbon Fiber Tail Control Rod is practical and improves the helicopters tail control.

Tail Control Unit
The newly designed dual point supported tail control assembly delivers slop free performance while improving rudder and precision.

New Swashplate (Gigh Stability & Zero Slop)
New Swashplate design with precise bearings features in zero slop delivering a precise and accurate controlled flight.

500 Slant Thread Main Drive Gear Set
Utilize of Strenghten main gear case features in using larger bearing has a higher load carry capacity which reduces the loss of momentum and improves the efficency, speed and smoothness of the main rotor. The new main gear case and all-metal central pulley transmission system is an efficent design to deliver the ultimate performance.

The 3rd Main Shaft Bearing Block
An additional 3rd main shaft bearing block increases the strength of the main frame while improving 3D flight.

1.6mm 3K Carbon Fiber Main Frame
Carbon fiber side frame plates are manufactured using proprietary composite material integration technology which integrates the battery mounting rails into the frame. This unique use of open space within the frame vreates a rigid frame and is aesthetically pleasing.

CNC Metal Shapely Reinforcement Plate And Brace Assembly
Brand new CNC metal reinforcement plate and brace compare with frame mounting bolt effectively increase the torsional strength of main frame, under extreme 3D maneuver, you can strongly feel its solid reinforcement from structure. In addition, the styling appearance harmony with red anodized and stainless color bring out the high tactile appeal.





Specifications

T-REX 500X
Length: 935mm
Height: 259mm
Width: 151mm
Main Blade Length: 470mm
Main Rotor Diameter: 1054mm
Tail Rotor Diameter: 219mm
Motor Drive Gear: 12T
Main Drive Gear: 134T
Main Drive Pulley: 80T
Tail Drive Gear: 21T
Drive Gear Ratio: 11.17:1:3.81
Weight (w/o power system): 1400g

Specifications

RCM-BL520MX
Input voltage: 22.2V (6S LiPo)
KV value: 1600
Continuous current: 85A
Surge current: 130A (2 sec)
Continuous Output power: 1900W
Surge Output power: 2750W (2 sec)
Stator dimension: 3527
Stator arms: 9
Magnet Poles: 6

Specifications

RCE-BL80X
Continuous current: 80A
Surge current: 100A
Supporting Input voltage: 7.4V ~ 22.2V
Supporting battery types: 2S ~ 6S LiPo/LiIon
BEC Output voltage: 2x 6V ~ 8.4V (Dual BEC)
BEC Output current: continuous 5A / surge 7A

Specifications

DS530M HV Digital Servo
Rating voltage: DC 6.0V - 8.4V
Temperature range: -20°C ~ +60°C
Stall torque: 6.5kg/cm @ 6.0V, 9.0kg/cm @ 8.4V
Motion Speed: 0.085sec/60° @ 6.0V, 0.065sec/60° @ 8.4V

Specifications

DS535M HV Digital Servo
Rating voltage: DC 6.0V - 8.4V
Temperature range: -20°C ~ +60°C
Stall torque: 5.0kg/cm @ 6.0V, 6.5kg/cm @ 8.4V
Motion Speed: 0.05sec/60° @ 6.0V, 0.035sec/60° @ 8.4V


Content

• 1x T-REX 500X Dominator Kit
• 1x 520MX Brushless Motor
• 1x BL80X Brushless ESC
• 2x 470mm Carbon Main Rotor Blade
• 2x 78mm Tail Rotor Blade
• 3x DS530M HV Digital Servo
• 1x DS535M HV Digital Servo
• 1x MICROBEAST Plus Flybarless System



Required for assembly

• 1x Transmitter (7-channel or more, helicopter system)
• 1x Receiver (7-channel or more, suitable to Transmitter)
• 1x Pitch gauge or Digital Pitch Gauge
• 1x Flight battery 6S Li-Po 2600 ~ 4600mAh (3300mAh suggestion)
• 1x LiPo Battery Charger
799.10€  Cena z DDV
Align T-rex 550X Dominator Combo (DS820M/DS825M) (RH55E19X)
The NEW T-REX 550X is definitely a significant leap forward in performance, enhanced by increased power, the integration of numerous innovative design changes, and lightweight improvements. The T-REX 550X performance is outstanding!

The brand new FL Flybarless Rotor Head System utilizes an extremely low CG design, reducing resistance during 3D maneuvers while increasing flight responsiveness and precision. A progressive design adds a gloss silver and red anodizing appearance which continue our quality development based on our 700 class helicopter. The T-REX 550X main frame utilizes composite material integration technology on carbon side frame plates, including the addition of battery mounting side rails, and a top motor mount design. In addition, the T-REX 550X's lightweight design is 200~250g (Combo250g/Super Combo 200g) lighter than our pervious model, this effectively increase the power and improves flight time.

The T-REX 550X utilizes the powerful 730MX (960KV) motor and our RCE-BL100A Brushless ESC which both are highly efficient providing superior power, improving the performance of the 6S power system. The NEW DS820M/DS825M high voltage brushless servos are extremely efficient and out perform other servos in this class. To protect these servos the new high-end CNC aluminum case function as a heat sink allowing the servos to operate at a lower temperature.

With improved performance and increased power, as well as included top of the line electronic equipment. The new T-REX 550 X will arouse your enthusiasm and devotion to the T-REX Family.


Specifications

Length: 1163mm
Height: 344mm
Width: 196mm
Main Rotor Diameter: 1248mm
Main Blade Lenght: 550mm
Tail Rotor Diameter: 254mm
Motor Drive Gear: 16T
Main Drive Gear: 112T
Autorotation Tail Drive Gear: 131T
Tail Drive Gear: 34T
Drive Gear Ratio: 7:1:3.85
Weight(w/o power system): 2590g


Content

• 1x T-REX 550X DOMINATOR
• 2x 550 Carbon Fiber Blade
• 2x 90mm 3K Carbon Fiber Tail Blade
• 1x 730MX Brushless Motor (960KV)
• 3x DS820M High Voltage Brushless Servo
• 1x DS825M High Voltage Brushless Servo
• 1x RCE-BL100A Brushless ESC


Required for assembly

• 1x Transmitter (7-channel or more,helicopter system)
• 1x Receiver (7-channel or more)
• 1x Flybarless System

• 1x Pitch gauge or Digital Pitch Gauge
• 1x 6S Li-Po 2600~5200mAh battery
899.14€  Cena z DDV
Align T-rex 550X Dominator Super Combo (DS820M/DS825M) (RH55E18X)
The NEW T-REX 550X is definitely a significant leap forward in performance, enhanced by increased power, the integration of numerous innovative design changes, and lightweight improvements. The T-REX 550X performance is outstanding!

The brand new FL Flybarless Rotor Head System utilizes an extremely low CG design, reducing resistance during 3D maneuvers while increasing flight responsiveness and precision. A progressive design adds a gloss silver and red anodizing appearance which continue our quality development based on our 700 class helicopter. The T-REX 550X main frame utilizes composite material integration technology on carbon side frame plates, including the addition of battery mounting side rails, and a top motor mount design. In addition, the T-REX 550X's lightweight design is 200~250g (Combo250g/Super Combo 200g) lighter than our pervious model, this effectively increase the power and improves flight time.

The T-REX 550X utilizes the powerful 730MX (960KV) motor and our RCE-BL100A Brushless ESC which both are highly efficient providing superior power, improving the performance of the 6S power system. The NEW DS820M/DS825M high voltage brushless servos are extremely efficient and out perform other servos in this class. To protect these servos the new high-end CNC aluminum case function as a heat sink allowing the servos to operate at a lower temperature.

With improved performance and increased power, as well as included top of the line electronic equipment. The new T-REX 550 X will arouse your enthusiasm and devotion to the T-REX Family.


Specifications

Length: 1163mm
Height: 344mm
Width: 196mm
Main Rotor Diameter: 1248mm
Main Blade Lenght: 550mm
Tail Rotor Diameter: 254mm
Motor Drive Gear: 16T
Main Drive Gear: 112T
Autorotation Tail Drive Gear: 131T
Tail Drive Gear: 34T
Drive Gear Ratio: 7:1:3.85
Weight(w/o power system): 2590g


Content

• 1x T-REX 550X DOMINATOR
• 2x 550 Carbon Fiber Blade
• 2x 90mm 3K Carbon Fiber Tail Blade
• 1x 730MX Brushless Motor (960KV)
• 3x DS820M High Voltage Brushless Servo
• 1x DS825M High Voltage Brushless Servo
• 1x RCE-BL100A Brushless ESC
• 1x MICROBEAST Plus Flybarless System


Required for assembly

• 1x Transmitter (7-channel or more,helicopter system)
• 1x Receiver (7-channel or more)
• 1x Pitch gauge or Digital Pitch Gauge
• 1x 6S Li-Po 2600~5200mAh battery
999.18€  Cena z DDV
Align T-rex 600XN Combo (Nitro) (RH60N07X)
One of the most classic ALIGN models, T-REX 600N nitro helicopter. In 2018, we bring you the brand new design of T-REX 600XN, it inherits the design of T-REX 700XN featuring innovation, rigidity and lightness. Extremely perfection and precision, the T-REX 600XN is about to excite your inner soul to bring back your passion for nitro.

T-REX 600XN adopts the new direct to swashplate servo design, compared to the previous generation T-REX 600N’s push-pull mode control, provides precise and fast control! Utilizing the 550 Flybarless Rotor Head System features an extremely low Center of Gravity (CG) design, to effectively reduces resistance during 3D maneuvers, and increase flight responsiveness and precision. This designed maintains a 90-degree symmetrical angle between the Rotor Grip Arms and Linkage Rods for superior stable flight performance. The Engineered Narrow Body Design efficiently decrease gear abrasion and frame deformation during flight. The T-REX 600XN maintains the proper CG, by moving the engine forward to allow the fuel tank to be positioned in the center of the main shaft. CG remains consistent as the fuel level changes during flight.

The new steel alloy clutch liner is durable with temperature control designed to avoid the exploding clutch liner or a breaking clutch housing. The steel alloy clutch liner extends the life to over a 1000 flights. The Receiver Mount provides cable and wiring protection, and easy to maintenance by removing a few screws from the mainframe.

The new high voltage output: 6A 7.4V BEC with down / regulation system for constant power to the CCPM server channel for receivers and servos. Includes a built-in one-button push glow plug igniter eliminating the hassle of using traditional electric clip plug on igniters. Also increased external high-frequency filter capacitance to effectively reduce the interference generated by external noise; such as high-speed and high torque servos. The brand new DS820M/DS825M high voltage brushless servos use brushless motors for fast speed, high torque, superior, and efficient reaction time allows the Align 600XN precise, fast performance. The new CNC machined aluminum case design is aesthetically appealing while acting as a highly efficient heat sink.

The new generation of T-REX 600XN innovative design will excite your inner soul to bring back your passion for nitro!


Features

• After performing many tests to determine the most efficient aerodynamic canopy we are pleased to release this brand new lightweight canopy! This ultimate canopy made of glass and carbon fiber is lightweight and achieves best dynamic performance. Also a new unique paint scheme for the newest member of the T-REX family.
• Landing skid is tilted 5 degree forward which improves crashworthiness.
• Engineered Narrow Body Design efficiently decrease gear abrasion and frame deformation during flight. The Align T-REX new narrow body design is stronger and increases flight durability.
• The new direct to swashplate servo design provides precise and fast control. Designed to maintain a 90-degree symmetrical angle between the Rotor Grip Arms and Linkage Rods for superior and stable flight performance.
• Align Advanced Metal Swashplate strongly connects to the rotor holder grips preventing rotor head disengagement during intense flight. Two optional linkage ball mounting holes allow for personal selection of resolution based on desired flight performance.
• Receiver mount provides cable and wiring protection, easy to maintain equipment by removing a few screws from the mainframe.
• Maintaining the proper Center of Gravity CG is important for helicopters. After extensive Research and Development, moving the engine forward allowed the fuel tank to be positioned in the center of the main shaft. This optimum location for the fuel tank permits the 600XN to maintain consistent CG as the fuel level changes during flight.
• The idler pulley gear improves rotation stability and effectively reduces the load from the gears while increasing bearing capacity. The gears made of steel alloy are high strength and wear resistant.
• CNC metal reinforcement plate and brace align with frame mounting bolts effectively increasing the torsional strength of the mainframe. Under extreme 3D maneuvers, you can feel the improved reinforcement to the mainframe. Also, the plate helps with engine cooling and adds additional protection for the motor.
• Designed specifically for helicopters, utilizing a brushless motor for fast speed, high torque, and superior, efficient reaction time allows the Align 600XN precise, fast performance. The brand new DS820M high voltage brushless servo has a with a new CNC machined aluminum case. The new aluminum case design is aesthetically appealing while acting as a highly efficient heat sink for superior protection of the servo.
• High voltage output: 6A 7.4V BEC with down / regulation system for stable power to the CCPM server channel for receivers and servos. Includes a built-in one-button push glow plug igniter eliminating the hassle of using traditional electric clip plug on igniters. Also increased external high-frequency filter capacitance to effectively reduce the interference generated by external noise; such as high-speed and high torque servos.
• An integrated motor mounting bracket allows for efficient heat dissipation from the motor. The superior Cooling Motor Mount is CNC from high strength aluminum alloy, and anodized for aesthetically pleasing appearance.
• Dual-sided tail servo mount strengthens the entire frame structure while allowing for better accessibility when servicing the 600XN.
• Brand new strengthened precision design with high-end M4x8 hexagonal screw upgrade. The new rigid design improves and strengthens the entire structure enhancing tail performance for all pilots.


Specifications

Length: 1152mm
Height: 356mm
Main Blade Length: 600mm
Main Rotor Diameter: 1354mm
Tail Rotor Diameter: 260mm
Engine Pinion Gear: 20T
Main Drive Gear: 170T
Autorotation Tail Drive Gear: 180T
Drive Gear Ratio (E:M:T): 8.5:1:4.5
Fuel Tank Capacity: 440ccm
Flying Weight Approx: 3400g


Content

• 1x T-REX 600XN Kit
• 2x 600 Carbon Fiber Blade
• 2x 95 Carbon Tail Blades
• 3x DS820M Standard servo
• 1x DS825M Tail servo
• 3x DS530 Throttle servo
• 1x Govemor Sensor
• 1x B6M 2-In-1 Voltage Regulator


Required for assembly

• 1x Transmitter (7-channel or more, helicopter system)
• 1x Receiver (7-channel or more)
• 1x Engine starter
• 1x Flybarless system
• 1x Governor System (if not integrated in Flybarless System)
• 1x Digital pitch gauge
• 1x Fuel pump
• 1x Engine fuel
• 1x 50~60 Muffler
• 1x 50~60 Engine
• 1x Receiver battery (2-3S LiPo 7,4V-11,1V 1800-2400mAh)

1,149.24€  Cena z DDV
Align T-rex 600XN Super Combo (Nitro) (RH60N06X)
One of the most classic ALIGN models, T-REX 600N nitro helicopter. In 2018, we bring you the brand new design of T-REX 600XN, it inherits the design of T-REX 700XN featuring innovation, rigidity and lightness. Extremely perfection and precision, the T-REX 600XN is about to excite your inner soul to bring back your passion for nitro.

T-REX 600XN adopts the new direct to swashplate servo design, compared to the previous generation T-REX 600N’s push-pull mode control, provides precise and fast control! Utilizing the 550 Flybarless Rotor Head System features an extremely low Center of Gravity (CG) design, to effectively reduces resistance during 3D maneuvers, and increase flight responsiveness and precision. This designed maintains a 90-degree symmetrical angle between the Rotor Grip Arms and Linkage Rods for superior stable flight performance. The Engineered Narrow Body Design efficiently decrease gear abrasion and frame deformation during flight. The T-REX 600XN maintains the proper CG, by moving the engine forward to allow the fuel tank to be positioned in the center of the main shaft. CG remains consistent as the fuel level changes during flight.

The new steel alloy clutch liner is durable with temperature control designed to avoid the exploding clutch liner or a breaking clutch housing. The steel alloy clutch liner extends the life to over a 1000 flights. The Receiver Mount provides cable and wiring protection, and easy to maintenance by removing a few screws from the mainframe.

The new high voltage output: 6A 7.4V BEC with down / regulation system for constant power to the CCPM server channel for receivers and servos. Includes a built-in one-button push glow plug igniter eliminating the hassle of using traditional electric clip plug on igniters. Also increased external high-frequency filter capacitance to effectively reduce the interference generated by external noise; such as high-speed and high torque servos. The brand new DS820M/DS825M high voltage brushless servos use brushless motors for fast speed, high torque, superior, and efficient reaction time allows the Align 600XN precise, fast performance. The new CNC machined aluminum case design is aesthetically appealing while acting as a highly efficient heat sink.

The new generation of T-REX 600XN innovative design will excite your inner soul to bring back your passion for nitro!


Features

• After performing many tests to determine the most efficient aerodynamic canopy we are pleased to release this brand new lightweight canopy! This ultimate canopy made of glass and carbon fiber is lightweight and achieves best dynamic performance. Also a new unique paint scheme for the newest member of the T-REX family.
• Landing skid is tilted 5 degree forward which improves crashworthiness.
• Engineered Narrow Body Design efficiently decrease gear abrasion and frame deformation during flight. The Align T-REX new narrow body design is stronger and increases flight durability.
• The new direct to swashplate servo design provides precise and fast control. Designed to maintain a 90-degree symmetrical angle between the Rotor Grip Arms and Linkage Rods for superior and stable flight performance.
• Align Advanced Metal Swashplate strongly connects to the rotor holder grips preventing rotor head disengagement during intense flight. Two optional linkage ball mounting holes allow for personal selection of resolution based on desired flight performance.
• Receiver mount provides cable and wiring protection, easy to maintain equipment by removing a few screws from the mainframe.
• Maintaining the proper Center of Gravity CG is important for helicopters. After extensive Research and Development, moving the engine forward allowed the fuel tank to be positioned in the center of the main shaft. This optimum location for the fuel tank permits the 600XN to maintain consistent CG as the fuel level changes during flight.
• The idler pulley gear improves rotation stability and effectively reduces the load from the gears while increasing bearing capacity. The gears made of steel alloy are high strength and wear resistant.
• CNC metal reinforcement plate and brace align with frame mounting bolts effectively increasing the torsional strength of the mainframe. Under extreme 3D maneuvers, you can feel the improved reinforcement to the mainframe. Also, the plate helps with engine cooling and adds additional protection for the motor.
• Designed specifically for helicopters, utilizing a brushless motor for fast speed, high torque, and superior, efficient reaction time allows the Align 600XN precise, fast performance. The brand new DS820M high voltage brushless servo has a with a new CNC machined aluminum case. The new aluminum case design is aesthetically appealing while acting as a highly efficient heat sink for superior protection of the servo.
• High voltage output: 6A 7.4V BEC with down / regulation system for stable power to the CCPM server channel for receivers and servos. Includes a built-in one-button push glow plug igniter eliminating the hassle of using traditional electric clip plug on igniters. Also increased external high-frequency filter capacitance to effectively reduce the interference generated by external noise; such as high-speed and high torque servos.
• An integrated motor mounting bracket allows for efficient heat dissipation from the motor. The superior Cooling Motor Mount is CNC from high strength aluminum alloy, and anodized for aesthetically pleasing appearance.
• Dual-sided tail servo mount strengthens the entire frame structure while allowing for better accessibility when servicing the 600XN.
• Brand new strengthened precision design with high-end M4x8 hexagonal screw upgrade. The new rigid design improves and strengthens the entire structure enhancing tail performance for all pilots.


Specifications

Length: 1152mm
Height: 356mm
Main Blade Length: 600mm
Main Rotor Diameter: 1354mm
Tail Rotor Diameter: 260mm
Engine Pinion Gear: 20T
Main Drive Gear: 170T
Autorotation Tail Drive Gear: 180T
Drive Gear Ratio (E:M:T): 8.5:1:4.5
Fuel Tank Capacity: 440ccm
Flying Weight Approx: 3400g


Content

• 1x T-REX 600XN Kit
• 1x Align 55H Motor (O.S. 55HZ Hyper)
• 1x Align High Performance Muffler

• 2x 600 Carbon Fiber Blade
• 2x 95 Carbon Tail Blades
• 3x DS820M Standard servo
• 1x DS825M Tail servo
• 3x DS530 Throttle servo
• 1x Govemor Sensor
• 1x B6M 2-In-1 Voltage Regulator


Required for assembly

• 1x Transmitter (7-channel or more, helicopter system)
• 1x Receiver (7-channel or more)
• 1x Engine starter
• 1x Flybarless system
• 1x Governor System (if not integrated in Flybarless System)
• 1x Digital pitch gauge
• 1x Fuel pump
• 1x Engine fuel
• 1x Receiver battery (2-3S LiPo 7,4V-11,1V 1800-2400mAh)

1,449.36€  Cena z DDV
Align T-rex 700XN RC Helicopter Kit (Nitro) (RH70N12X)

How long have you not heard roaring sound of engine? How long have you not had passionate feelings? The new combination of innovation, steel, light weight and precision, the ultimate in perfect technology in one, that’s new generation T-REX 700XN.

T-REX 700XN adopts the new direct to swashplate servo design, compared with previous generation T-REX 700N double push-pull mode control, providing precise and fast control! With 700EFL Flybarless Rotor Head System utilize extreme low CG design, effectively reduces resistance during 3D maneouvers, increased flight responsiveness and precision. Designed to maintain a 90-degree symmetrical angle between the Rotor Grip Arms and Linkage Rods for superior and stable flight performance. Engineered Narrow Body Design efficiently decrease gear abrasion and frame deformation during flight. T-REX 700XN maintain the proper Center of Gravity CG, moving the engine forward allowed the fuel tank to be positioned in the centre of the main shaft to maintain consistent CG as the fuel level changes during flight.

The new steel alloy clutch liner is durable with temperature control avoiding the exploding clutch liner or breaking clutch housing, the lifetime is over 1000 flights. Receiver mount provides cable and wiring protection, easy to maintain and assemble by removing a few screws from the mainframe.

For electronic equipment, high voltage output: 6A 7.4V BEC with down / regulation system for stable power to the CCPM server channel for receivers and servos. Includes a built-in one-button push glow plug igniter eliminating the hassle of using traditional electric clip plug on igniters. Also increased external high-frequency filter capacitance to effectively reduce the interference generated by external noise; such as high-speed and high torque servos. The brand new DS820M/DS825M high voltage brushless servo and brushless motor for fast speed, high torque, and superior, efficient reaction time allows the Align 700XN precise, fast performance. The new CNC machined aluminium case design is aesthetically appealing while acting as a highly efficient heat sink.

The new generation of T-REX 700XN has a number of innovative design, detonating your inner soul and once again feeling the original passion!


Key features:
- New lightweight canopy made from glass fibre and carbon fibre
- Progressive lightweight landing skids, tilted 5° forwards
- Narrow frame design
- Direct connect servo design
- Main rotor grip arm and linkage rod connected at 90° for symmetry
- New easy maintenance receiver mount
- CNC metal reinforcement plate and brace - for torsional stiffness of the frames
- Single piece CNC engine mount
- Tail servo mounted across the width of the model
- Thicker tail boom braces (8mm)
- Latest tail rotor hub design with M4 bolts

Specification
  • Length: 1346mm
  • Height: 384mm
  • Width: 202mm
  • Main Blade Length: 700mm
  • Main Rotor Diameter: 1570mm
  • Tail Rotor Diameter: 281mm
  • Motor Drive Gear:13T
  • Main Drive Gear:107T
  • Autorotation Tail Drive Gear: 104T
  • Tail Drive Gear: 22T
  • Drive Gear Ratio: 8.23:1:4.73
  • Fuel Tank Capacity: 630cc.
  • Takeoff Weight: Approx. 4540g



Kit includes:
- T-Rex 700XN Dominator
- 700 Carbon fibre main blade set
- 106mm 3K Carbon fibre tail blade set
- BT6X 2 in 1 High Voltage regulator (NEW)


Required for assembly
• 1x Transmitter (7-channel or more, helicopter system)
• 1x Receiver (7-channel or more)
• 1x Engine starter
• 1x Flybarless system
• 1x Throttle Servo (Standard size)
• 3x Swashplate Servo (Standard size)
• 1x Tail Servo (Standard size)
• 1x Governor System (if not integrated in Flybarless System)
• 1x Digital pitch gauge
• 1x Fuel pump
• 1x Engine fuel
• 1x 90~105 Muffler
• 1x 90~105 Engine
• 1x Receiver battery



918.66€  Cena z DDV
Align T-rex 700XN Dominator Super Combo (Nitro) (RH70N11X-SC)

How long have you not heard roaring sound of engine? How long have you not had passionate feelings? The new combination of innovation, steel, light weight and precision, the ultimate in perfect technology in one, that’s new generation T-REX 700XN.

T-REX 700XN adopts the new direct to swashplate servo design, compared with previous generation T-REX 700N double push-pull mode control, providing precise and fast control! With 700EFL Flybarless Rotor Head System utilize extreme low CG design, effectively reduces resistance during 3D maneouvers, increased flight responsiveness and precision. Designed to maintain a 90-degree symmetrical angle between the Rotor Grip Arms and Linkage Rods for superior and stable flight performance. Engineered Narrow Body Design efficiently decrease gear abrasion and frame deformation during flight. T-REX 700XN maintain the proper Center of Gravity CG, moving the engine forward allowed the fuel tank to be positioned in the centre of the main shaft to maintain consistent CG as the fuel level changes during flight.

The new steel alloy clutch liner is durable with temperature control avoiding the exploding clutch liner or breaking clutch housing, the lifetime is over 1000 flights. Receiver mount provides cable and wiring protection, easy to maintain and assemble by removing a few screws from the mainframe.

For electronic equipment, high voltage output: 6A 7.4V BEC with down / regulation system for stable power to the CCPM server channel for receivers and servos. Includes a built-in one-button push glow plug igniter eliminating the hassle of using traditional electric clip plug on igniters. Also increased external high-frequency filter capacitance to effectively reduce the interference generated by external noise; such as high-speed and high torque servos. The brand new DS820M/DS825M high voltage brushless servo and brushless motor for fast speed, high torque, and superior, efficient reaction time allows the Align 700XN precise, fast performance. The new CNC machined aluminium case design is aesthetically appealing while acting as a highly efficient heat sink.

The new generation of T-REX 700XN has a number of innovative design, detonating your inner soul and once again feeling the original passion!


Key features:
- New lightweight canopy made from glass fibre and carbon fibre
- Progressive lightweight landing skids, tilted 5° forwards
- Narrow frame design
- Direct connect servo design
- Main rotor grip arm and linkage rod connected at 90° for symmetry
- New easy maintenance receiver mount
- CNC metal reinforcement plate and brace - for torsional stiffness of the frames
- Single piece CNC engine mount
- Tail servo mounted across the width of the model
- Thicker tail boom braces (8mm)
- Latest tail rotor hub design with M4 bolts

Specification
  • Length: 1346mm
  • Height: 384mm
  • Width: 202mm
  • Main Blade Length: 700mm
  • Main Rotor Diameter: 1570mm
  • Tail Rotor Diameter: 281mm
  • Motor Drive Gear:13T
  • Main Drive Gear:107T
  • Autorotation Tail Drive Gear: 104T
  • Tail Drive Gear: 22T
  • Drive Gear Ratio: 8.23:1:4.73
  • Fuel Tank Capacity: 630cc.
  • Takeoff Weight: Approx. 4540g



Kit includes:
- T-Rex 700XN Dominator
- 700 Carbon fibre main blade set
- 106mm 3K Carbon fibre tail blade set
- 3x Align DS820M Swashplate Servo
- 1x Align DS825M Tail Servo
- 1x Align DS530 Throttle Servo
- BT6X 2 in 1 High Voltage regulator (NEW)
- MICROBEAST Plus Flybarless System
- BEASTX Governor Sensor


Required for assembly
• 1x Transmitter (7-channel or more, helicopter system)
• 1x Receiver (7-channel or more)
• 1x Engine starter
• 1x Digital pitch gauge
• 1x Fuel pump
• 1x Engine fuel
• 1x 90~105 Muffler
• 1x 90~105 Engine
• 1x Receiver battery



1,319.43€  Cena z DDV
Align T-rex 700XN Dominator Combo (Nitro) (RH70N11X)

How long have you not heard roaring sound of engine? How long have you not had passionate feelings? The new combination of innovation, steel, light weight and precision, the ultimate in perfect technology in one, that’s new generation T-REX 700XN.

T-REX 700XN adopts the new direct to swashplate servo design, compared with previous generation T-REX 700N double push-pull mode control, providing precise and fast control! With 700EFL Flybarless Rotor Head System utilize extreme low CG design, effectively reduces resistance during 3D maneouvers, increased flight responsiveness and precision. Designed to maintain a 90-degree symmetrical angle between the Rotor Grip Arms and Linkage Rods for superior and stable flight performance. Engineered Narrow Body Design efficiently decrease gear abrasion and frame deformation during flight. T-REX 700XN maintain the proper Center of Gravity CG, moving the engine forward allowed the fuel tank to be positioned in the centre of the main shaft to maintain consistent CG as the fuel level changes during flight.

The new steel alloy clutch liner is durable with temperature control avoiding the exploding clutch liner or breaking clutch housing, the lifetime is over 1000 flights. Receiver mount provides cable and wiring protection, easy to maintain and assemble by removing a few screws from the mainframe.

For electronic equipment, high voltage output: 6A 7.4V BEC with down / regulation system for stable power to the CCPM server channel for receivers and servos. Includes a built-in one-button push glow plug igniter eliminating the hassle of using traditional electric clip plug on igniters. Also increased external high-frequency filter capacitance to effectively reduce the interference generated by external noise; such as high-speed and high torque servos. The brand new DS820M/DS825M high voltage brushless servo and brushless motor for fast speed, high torque, and superior, efficient reaction time allows the Align 700XN precise, fast performance. The new CNC machined aluminium case design is aesthetically appealing while acting as a highly efficient heat sink.

The new generation of T-REX 700XN has a number of innovative design, detonating your inner soul and once again feeling the original passion!


Key features:
- New lightweight canopy made from glass fibre and carbon fibre
- Progressive lightweight landing skids, tilted 5° forwards
- Narrow frame design
- Direct connect servo design
- Main rotor grip arm and linkage rod connected at 90° for symmetry
- New easy maintenance receiver mount
- CNC metal reinforcement plate and brace - for torsional stiffness of the frames
- Single piece CNC engine mount
- Tail servo mounted across the width of the model
- Thicker tail boom braces (8mm)
- Latest tail rotor hub design with M4 bolts

Specification
  • Length: 1346mm
  • Height: 384mm
  • Width: 202mm
  • Main Blade Length: 700mm
  • Main Rotor Diameter: 1570mm
  • Tail Rotor Diameter: 281mm
  • Motor Drive Gear:13T
  • Main Drive Gear:107T
  • Autorotation Tail Drive Gear: 104T
  • Tail Drive Gear: 22T
  • Drive Gear Ratio: 8.23:1:4.73
  • Fuel Tank Capacity: 630cc.
  • Takeoff Weight: Approx. 4540g



Kit includes:
- T-Rex 700XN Dominator
- 700 Carbon fibre main blade set
- 106mm 3K Carbon fibre tail blade set
- 3x Align DS820M Swashplate Servo
- 1x Align DS825M Tail Servo
- 1x Align DS530 Throttle Servo
- BT6X 2 in 1 High Voltage regulator (NEW)


Required for assembly
• 1x Transmitter (7-channel or more, helicopter system)
• 1x Receiver (7-channel or more)
• 1x Flybarless System (including governor)
• 1x Engine starter
• 1x Digital pitch gauge
• 1x Fuel pump
• 1x Engine fuel
• 1x 90~105 Muffler
• 1x 90~105 Engine
• 1x Receiver battery



1,239.52€  Cena z DDV
Align T-rex 700N DFC Combo (Nitro) (RH70N07X)
Align T-Rex 700N was developed based on years of R&D experiences, with superior design and economical pricing that brought 700 class glow helis to the masses, enabling Align to achieve a brand new milestone.
Now to celebrate this achievement, Align improved upon the already excellent design and introduces the brand new T-Rex 700N DFC!
Similar to the rigid and light design of the original, the most recognizable feature of the T-Rex 700N DFC is its narrow profile, which creates the impression of solid and simplicity visual effect.

The DFC main rotor system provides more direct and faster control feedback.
The new M1 helical main gear and new style tail control assembly improves the main gear durability and tail locking performance.
Utilizes larger capacity fuel tank for larger displacement engines, increasing 3D flight duration.


Features
• Equipped with the low CG DFC rotor head, exhibits exhilarating 3D performance and unimaginable flight speed.
• 700DFC CCPM Metal Swashplate and metal main shaft bearing block.
• New style H-cross section electronics mounting platform for simplified installation of electronics.
• Precision CNC machined aluminum pieces including elevator servo mount.
• Equipped with new high strength cnc m1 helical main gear and tail drive bevel gear assembly, featuring reinforced overall gear structure and increased gear thickness, effectively improves gear′s anti torsion ability to prevent gear from deforming under extreme power,reducing gear wear and power loss.
• 3K carbon plate narrow frame design, simple yet highly rigid, making assembly and maintenance convenient.
• Utilizes larger capacity fuel tank for larger displacement engines, increasing 3D flight duration.
• Tailboom is extended by 15mm to support the use of 720mm main blades. When equipped with 105 or 120 class engine, there will be a noticeable increase in power and performance!
• High quality new tail gearbox design, combined with new dual point mounted tail pitch control assembly to minimize slops and increase rudder control precision.


Specifications
Length: 1361mm
Height: 385mm
Main Blade Length: 700mm
Main Rotor Diameter: 1582mm
Tail Blade Length: 115mm
Tail Rotor Diameter: 281mm
Engine Pinion Gear: 14T
Main Drive Gear: 112T
Autorotation Tail Drive Gear: 104T
Tail Drive Gear: 21T
Drive Gear Ratio: 8:1:4.95 (E:M:T)
Fuel Tank Capacity: 660cc
Weight (with Power System): approx. 4200g

Content
• 1x T-REX 700 Nitro DFC Kit
• 2x 700mm Carbon fiber Main blade
• 2x 115mm Carbon fiber Tail blade
• 2-in-1 BEC/Igniter Unit.
• 1x Microbeast Plus Flybarless System
• 1x Governor Sensor
• 1x Aluminum Tail Boom


Required for assembly

• 1x Transmitter (7-channel or more, helicopter system)
• 1x Receiver (7-channel or more)
• 1x Standard servo (for throttle)
• 3x Standard servo (for swashplate)
• 1x Standard servo (for rudder)
• 1x Engine starter
• 1x Digital pitch gauge
• 1x Fuel pump
• 1x Engine fuel
• 1x 90-120 Muffler
• 1x 90-120 Engine




849.12€  Cena z DDV
Align T-rex 470LP Dominator Super Combo (RH47E02X)
Following the release of the T-REX 450L, which introduced an innovative design and came equipped with high-end electronic equipment. Aligns most anticipated helicopter release in 2016 the T-REX 470L is born. No matter whether you are a newcomer or a professional, the brand new T-REX 470L will give you the new flying feel again.

470EFL Main Rotor Head provides superior flight stability and offers a lower CG design to reduce flying resistance while providing a more rigid and fast rotor head response. To improve the strength and durability of the main and feathering shaft the 470 main shaft outer dimension was increased from 5mm to 6mm, while the feathering shaft outer dimension was increased from 4mm to 5mm. The 470L has adopt a high standard 1.2mm 3K carbon fiber main frame and a wider body design which increases the size of the battery compartment allowing the use of larger capacity battery. The 470L utilizes a high efficient belt drive assembly design with an innovative adjustable belt guide pulley, providing a convenient way to adjust the belt tension by releasing or tightening the screw. This screw is used to maintain optimal belt tension improving the life of the belt and lowering maintains costs. The landing skid is tilted 5 degrees forward to improve crashworthiness and makes T-REX 470L more avant-garde and dynamic.

The T-REX 470L is equipped with the large outer diameter 470MX motor (1800KV) which is highly efficient providing superior power, excellent torque, improved current draw, and a lower operating temperature which are excellent improvements as compared to the 460MX motor. The brand new DS450 digital cyclic servos and DS455 digital tail servo, support up to 8.4V, high voltage input, improving the servos torque and speed. The new RCE-BL50X brushless ESC with an internal BEC provides 5.0V to 8.4V which can be set based on servo specification. The new high-end electronics effectively enhance flight performance.

Specifications
Length: 755mm
Height: 210mm
Width: 108mm
Main Blade Length: 380mm
Main Rotor Diameter: 850mm
Tail Rotor Diameter: 181mm
Motor Pinion Gear: 11T
Main Drive Gear: 121T
Main Drive Pulley: 56T
Tail Drive Gear: 15T
Drive Gear Ratio: 11:1:3.73
Weight (w/o battery): 840g

Content
• 1x Align T-Rex 470LP Dominator Kit
• 2x 380 Carbon Fiber Blade
• 2x 69 Carbon Tail Blade
• 1x RCE-BL50X 50A Brushless ESC
• 1x 470MX Brushless Motor (1800KV)
• 3x DS450 Digital Servo
• 1x DS455 Digital Servo
• 1x MICROBEAST Plus Flybarless System

Required for assembly
• 1x Transmitter (6-channel or more, helicopter system)
• 1x Receiver (6-channel or more)
• 1x Pitch gauge or Digital Pitch Gauge
• 1x Battery 6S 22.2V LiPo 1250~1900mAh


419.68€  Cena z DDV
na stran      1 - 19 od 19
  • 1