T-rex 300 Parts
Damper Rubber 75°, Black (H25038A)
Content
• 2x Damper rubber black 75° (2.5x5x2.6mm)
• Use for T-REX 250 / 300X
Content
• 2x Damper rubber black 75° (2.5x5x2.6mm)
300X / 250DFC M2 socket collar screw (H25125)
• Use for T-REX 300X / 250 with DFC upgrade
Content
• 4x Socket collar screw (M2x12mm)
• 4x Washer (2x3.6x0.2mm)
• 4x Socket collar screw (M2x12mm)
• 4x Washer (2x3.6x0.2mm)
300X Carbon Main Frame (H30B001XXT)
Specifications
• Carbon Fiber Material
Content
• 1x 300 Carbon Fiber Upper Frame
• 1x 300 Carbon Fiber Lower Frame
• 2x M2 Cone Nut (M2x1.8mm)
• Use for T-REX 300X
Specifications
• Carbon Fiber Material
Content
• 1x 300 Carbon Fiber Upper Frame
• 1x 300 Carbon Fiber Lower Frame
• 2x M2 Cone Nut (M2x1.8mm)
300X Main Frame Mounting Bolt (H30B002XXT)
Specifications
• Aluminium Alloy Material
Content
• 8x 300X Main Frame Mounting Bolt (2x3.2x6.8mm)
• Use for T-REX 300X
Specifications
• Aluminium Alloy Material
Content
• 8x 300X Main Frame Mounting Bolt (2x3.2x6.8mm)
300X Battery Mount (H30B003XXT)
Specifications
Carbon Fiber Material
Content
• 1x 300 Battery Mount
• Use for T-REX 300X
Specifications
Carbon Fiber Material
Content
• 1x 300 Battery Mount
300X Gyro Mount Set (H30B004XXT)
Specifications
Carbon Fiber Material
Content
• 1x 300 Gyro Mount
• 1x 300 Rudder Servo Mount Board
• 2x M2 Cone Nut (M2x1.8mm)
• Use for T-REX 300X
Specifications
Carbon Fiber Material
Content
• 1x 300 Gyro Mount
• 1x 300 Rudder Servo Mount Board
• 2x M2 Cone Nut (M2x1.8mm)
300X Frame Mounting Block (H30B007XXT)
Specifications
Aluminum Alloy Material
Content
• 2x 300 Frame Mounting Block
• 2x 300 Frame Mounting Bolt (M2x30mm)
• 8x Socket Screw (M2x4mm)
• Use for T-REX 300X
Specifications
Aluminum Alloy Material
Content
• 2x 300 Frame Mounting Block
• 2x 300 Frame Mounting Bolt (M2x30mm)
• 8x Socket Screw (M2x4mm)
300X Shapely Reinforcement Plate And Brace Assembly (H30B009XXT)
Specifications
Aluminium Alloy Material
Content
• 1x 300 Shapely Reinforcement Brace (R)
• 1x 300 Shapely Reinforcement Brace (L)
• 8x Socket Screw (M2x8mm)
• Use for T-REX 300X
Specifications
Aluminium Alloy Material
Content
• 1x 300 Shapely Reinforcement Brace (R)
• 1x 300 Shapely Reinforcement Brace (L)
• 8x Socket Screw (M2x8mm)
300X Main Shaft Bearing Block (H30B011XXT)
Specifications
Aluminium Alloy Material
Content
• 2x 300 Main Shaft Bearing Block
• 2x Bearing MR84ZZ (4x8x3mm)
• 8x Socket Screw (M2x4mm)
• 4x Socket Screw (M2x6mm)
• 4x Socket Screw (M2x8mm)
• Use for T-REX 300X
Specifications
Aluminium Alloy Material
Content
• 2x 300 Main Shaft Bearing Block
• 2x Bearing MR84ZZ (4x8x3mm)
• 8x Socket Screw (M2x4mm)
• 4x Socket Screw (M2x6mm)
• 4x Socket Screw (M2x8mm)
300X Landing Skid (H30F001XXT)
Content
• 1x 300 Landing Skid
• Use for T-REX 300X
Content
• 1x 300 Landing Skid
450 Tail Shaft Slide Bush (H45T001XXT)
Content
• 1x Tail shaft slide bush (3x4x10.8mm)
• Use for T-REX 300X / 450 / 470L
Content
• 1x Tail shaft slide bush (3x4x10.8mm)
470L Tail Pitch Control Link (H47T022XXT)
Content
• 2x 450 V2 Tail Pitch Control Link (10.75x5.8x5.7mm)
• 4x Collar B (2x3x2.5mm)
• 2x Socket Button Head Collar Screw (M2x6mm)
• Use for T-REX 300X / 470L
Content
• 2x 450 V2 Tail Pitch Control Link (10.75x5.8x5.7mm)
• 4x Collar B (2x3x2.5mm)
• 2x Socket Button Head Collar Screw (M2x6mm)
50 Tail Blade (HQ0503A)
Specifications
Shape: Symmetrical Wing
Length: 50mm
Width: 2.6mm
Shaft Diameter: 2mm
Weight: 2.8g/set
Content
• 2x Tail rotor blade
• Use for T-REX 300X
Specifications
Shape: Symmetrical Wing
Length: 50mm
Width: 2.6mm
Shaft Diameter: 2mm
Weight: 2.8g/set
Content
• 2x Tail rotor blade
Canopy Nut (HS1279T)
Content
• 4x canopy nut
• Use for T-REX 450 / 300X
Content
• 4x canopy nut
DS4 Servo Horn Set (HSP41503)
Content
• 3x DS4 Servo Horn, long
• 1x DS4 Servo Horn, short
• Suitable for servos of ALIGN DS4 series
Content
• 3x DS4 Servo Horn, long
• 1x DS4 Servo Horn, short
300X Painted Canopy (HC3001)
Content
• 1x Painted Canopy
• 2x Fiberglass Canopy Nut
• Use for T-REX 300X
Content
• 1x Painted Canopy
• 2x Fiberglass Canopy Nut
Main Drive Gear 115T (H30G002XXT)
Specifications
Polyoxymethylene Material
Content
• 2x Main Drive Gear 115T
• Use for T-REX 300X
• Must use with:
- Motor Pinion Gear 14T (H30G003XXT)
• Must use with:
- Motor Pinion Gear 14T (H30G003XXT)
Specifications
Polyoxymethylene Material
Content
• 2x Main Drive Gear 115T
Motor Pinion Gear 14T (H30G003XXT)
Specifications
Stainless Steel Material
Modulus: 0.5
Shaft Diameter: 3mm
Weight : 1.2g/pc
Content
• 2x Motor Pinion Gear 14T
• Use for T-REX 300X
• Must use with:
- Main Drive Gear 115T (H30G002XXT)
• Must use with:
- Main Drive Gear 115T (H30G002XXT)
Specifications
Stainless Steel Material
Modulus: 0.5
Shaft Diameter: 3mm
Weight : 1.2g/pc
Content
• 2x Motor Pinion Gear 14T
F2.5-6M Thrust Bearing (H30R001XXT)
Content
• 4x F2.5-6 Thrust Bearing (2.5x6x3mm)
• 4x Washer (4x6x0.5mm)
• Use for T-REX 300X Feathering Shaft (H30H003XXT)
Content
• 4x F2.5-6 Thrust Bearing (2.5x6x3mm)
• 4x Washer (4x6x0.5mm)
Tail Drive Belt (H30T003XXT)
Content
• 1x Tail Drive Belt
• Use for T-REX 300X
Content
• 1x Tail Drive Belt
300X Tail Boom Mount (H30T004XXT)
Specifications
Glass Fiber Reinforced Nylon Material
Content
• 1x 300 Tail Boom Mount (L)
• 1x 300 Tail Boom Mount (R)
• 4x Hex Mounting Bolt (M2x14mm)
• Use for T-REX 300X
• Must use with:
- 300X Carbon Main Frame (H30B001XXT)
• Must use with:
- 300X Carbon Main Frame (H30B001XXT)
Specifications
Glass Fiber Reinforced Nylon Material
Content
• 1x 300 Tail Boom Mount (L)
• 1x 300 Tail Boom Mount (R)
• 4x Hex Mounting Bolt (M2x14mm)
RCM-BL300MX Brushless Motor (3700KV/2216) (HML30M01)
Specifications
Input voltage: 3S
Max continuous current: 24A (36A 5sec)
Max output power:Approx. 260W (400W 5sec)
KV value: 3700KV
Stator Dimension: 2216
Stator Arms: 9
Magnet Poles: 6
Spindle: 3.5mm
Dimension: 29.2x43.7mm
Weight: Approx. 70g
Content
• 1x 300MX Brushless Motor
• 2x Socket Screw (M2.5x6mm)
• 3x 3.5mm gilt terminal
• Use for T-REX 300
Specifications
Input voltage: 3S
Max continuous current: 24A (36A 5sec)
Max output power:Approx. 260W (400W 5sec)
KV value: 3700KV
Stator Dimension: 2216
Stator Arms: 9
Magnet Poles: 6
Spindle: 3.5mm
Dimension: 29.2x43.7mm
Weight: Approx. 70g
Content
• 1x 300MX Brushless Motor
• 2x Socket Screw (M2.5x6mm)
• 3x 3.5mm gilt terminal
RCE-BL25A Brushless ESC 25A (HES02501)
Specifications
Continuous current: 25A
Surge current: 40A (for 15seconds)
Supporting motor types: 2 poles to 10+poles in/outrunner brushless motors
Supporting maximum RPM: 2poles=>190,000rpm, 6poles=>63,000rpm
Supporting input voltage: 11.1V to 22.2V
Supporting battery types: Li-Ion / Li-Po 3-6 cells
BEC output: 6.0V - 7.4V, 3A (Burst 7A)
Size: 47x22x10mm
Weight: 27g
Content
• 1x RCM-BL300MX Brushless Motor 3700KV
• 2x Socket Screw (M2.5x6mm)
• 3x ALIGN standard 3.5mm gilt terminal
• BEC output voltage(6~7.4V) to show great performance on the torque & speed of servo.
• BEC output utilizing switching power system,suitable for 3S~6S Li battery, with continuous current rating of 3A, and burst rating of 7A.
• Three programmable throttle speed settings to support quick throttle response.
• Govener Mode (governor speed controller slow down system).
• Small and compact PCB design for ease of installation.
• Large heatsink for great thermal performance.
• High compatibility to work with 98% brushless motors in the market.
• Ultra smooth motor start design to run with all kinds of brushless motors.
• The power inlet adapts Japanese made "Low ESR" capacitor in order to provide stable power source.
• The BEC power outlet adapts a Japanese made specialty polymer aluminum electrolytic capacitor. It provides better noise filtering capability than other BL ESC in the market, and moreover to give more stable performanceof R/C receiver and BEC.
• Users can use the transmitter to operate the motor setting by Super stylized CPU.
• If the aircraft should land or crash in an unexpected location and become lost, the pilot can enable the Aircraft Locator Option. The Aircraft Locator Option is engaged by tuming off the transmitter. When the ESC does not receive a signal from the transmitter for 30 seconds, it will start to send an alarm to the motor. The sound of the alarm will aid the pilot to locate the aircraft. This option will not work with a PCM receiver that has SAVE function enabled, or with low noise resistant PM receivers.
• BEC output utilizing switching power system,suitable for 3S~6S Li battery, with continuous current rating of 3A, and burst rating of 7A.
• Three programmable throttle speed settings to support quick throttle response.
• Govener Mode (governor speed controller slow down system).
• Small and compact PCB design for ease of installation.
• Large heatsink for great thermal performance.
• High compatibility to work with 98% brushless motors in the market.
• Ultra smooth motor start design to run with all kinds of brushless motors.
• The power inlet adapts Japanese made "Low ESR" capacitor in order to provide stable power source.
• The BEC power outlet adapts a Japanese made specialty polymer aluminum electrolytic capacitor. It provides better noise filtering capability than other BL ESC in the market, and moreover to give more stable performanceof R/C receiver and BEC.
• Users can use the transmitter to operate the motor setting by Super stylized CPU.
• If the aircraft should land or crash in an unexpected location and become lost, the pilot can enable the Aircraft Locator Option. The Aircraft Locator Option is engaged by tuming off the transmitter. When the ESC does not receive a signal from the transmitter for 30 seconds, it will start to send an alarm to the motor. The sound of the alarm will aid the pilot to locate the aircraft. This option will not work with a PCM receiver that has SAVE function enabled, or with low noise resistant PM receivers.
Specifications
Continuous current: 25A
Surge current: 40A (for 15seconds)
Supporting motor types: 2 poles to 10+poles in/outrunner brushless motors
Supporting maximum RPM: 2poles=>190,000rpm, 6poles=>63,000rpm
Supporting input voltage: 11.1V to 22.2V
Supporting battery types: Li-Ion / Li-Po 3-6 cells
BEC output: 6.0V - 7.4V, 3A (Burst 7A)
Size: 47x22x10mm
Weight: 27g
Content
• 1x RCM-BL300MX Brushless Motor 3700KV
• 2x Socket Screw (M2.5x6mm)
• 3x ALIGN standard 3.5mm gilt terminal
Align Mini A.BUS 14-Ch AFHDS 2A Receiver (HEG00003)
Specifications
Channel: 14 channels
RX Sensitivity: -105dBm
RF Range: 2.4055 ~ 2.475 GHz
System Mode: 2.4G system AFHDS 2A
Input Power: 4.0 ~ 8.4V
Transmit Distance: In the air without interference <150M
Dimension: 20x15.2x5.3mm
Content
• 1x Mini A.BUS Receiver
• 1x Receiver Bind Plug
• 1x Double Sided Tape
• Use for A10 Transmitter
Specifications
Channel: 14 channels
RX Sensitivity: -105dBm
RF Range: 2.4055 ~ 2.475 GHz
System Mode: 2.4G system AFHDS 2A
Input Power: 4.0 ~ 8.4V
Transmit Distance: In the air without interference <150M
Dimension: 20x15.2x5.3mm
Content
• 1x Mini A.BUS Receiver
• 1x Receiver Bind Plug
• 1x Double Sided Tape
Align 3S1P 11.1V 1300mAh 30C (XT30) (HBP13002)
1x Align 3S1P 11.1V 1300mAh 30C (XT30)
300X / 450 / 470L Metal I-shaped Arm (H47T017XXT)
Content
• 1x 450 Metal I-shaped Arm
• 1x 450 Metal Mount Link
• 1x Linkage ball A (M2x2.5) (4.75x7.18mm)
• 4x Bearing F681XZZ (1.5x4x5x2mm)
• 2x Bearing FMR52ZZ (2x5x2.3mm)
• 4x Socket button head screw (#0-80x4mm)
• 2x Socket button head screw (M2x4mm)
• Use for T-REX 300X / 450L / 470L
Content
• 1x 450 Metal I-shaped Arm
• 1x 450 Metal Mount Link
• 1x Linkage ball A (M2x2.5) (4.75x7.18mm)
• 4x Bearing F681XZZ (1.5x4x5x2mm)
• 2x Bearing FMR52ZZ (2x5x2.3mm)
• 4x Socket button head screw (#0-80x4mm)
• 2x Socket button head screw (M2x4mm)
470L Tail Pitch Assembly (H47T016XXT)
Content
• 1x Metal Bearing mount
• 2x Bearing MR74ZZ (4x7x2.5mm)
• 1x Bearing mount washer (4x5.1x1.6mm)
• 1x Slide shaft (2x3x8.4mm)
• 1x Metal T type arm
• 2x Collar screw (M2x6mm)
• 2x Control link (1.5x2.3x1.4mm)
• 4x Collar B (2x3x2.5mm)
• 2x Collar screw (M2x6.5mm)
• Use for T-REX 300X / 470L
Content
• 1x Metal Bearing mount
• 2x Bearing MR74ZZ (4x7x2.5mm)
• 1x Bearing mount washer (4x5.1x1.6mm)
• 1x Slide shaft (2x3x8.4mm)
• 1x Metal T type arm
• 2x Collar screw (M2x6mm)
• 2x Control link (1.5x2.3x1.4mm)
• 4x Collar B (2x3x2.5mm)
• 2x Collar screw (M2x6.5mm)
470L Plastic Tail Rotor Holder (H47T009XXT)
Content
• 2x Plastic Metal Tail Rotor Holder
• 1x Tail rotor hub
• 2x Bearing MR63ZZ (3x6x2.5mm)
• 2x Bearing MR74ZZ (3.5x7x2.5mm)
• 2x Thrust bearing (3x6x2.8mm)
• 2x Washer (2x4.8x0.6mm)
• 2x Washer (2x4.8x0.3mm)
• 2x Socket button head collar screw (M3x6mm)
• 2x Socket button head collar screw (M3x12mm)
• 2x Round Carpentry Screw (T2x6mm)
• 1x M3 set screw (M3x3mm)
• 2x M2 Locking nut
• Use for T-REX 300X / 450 / 470L
• When using with 450 use Tail Pitch Assembly (HS1304B)
• When using with 470L use Tail Pitch Control Link (H47T022XXT)
• When using with 470L use Tail Pitch Control Link (H47T022XXT)
Content
• 2x Plastic Metal Tail Rotor Holder
• 1x Tail rotor hub
• 2x Bearing MR63ZZ (3x6x2.5mm)
• 2x Bearing MR74ZZ (3.5x7x2.5mm)
• 2x Thrust bearing (3x6x2.8mm)
• 2x Washer (2x4.8x0.6mm)
• 2x Washer (2x4.8x0.3mm)
• 2x Socket button head collar screw (M3x6mm)
• 2x Socket button head collar screw (M3x12mm)
• 2x Round Carpentry Screw (T2x6mm)
• 1x M3 set screw (M3x3mm)
• 2x M2 Locking nut
470L Tail Rotor Holder (H47T006XXT)
• Use for T-REX 300X / 450 / 470L
• When using with 450 use Tail Pitch Assembly (HS1304B)
• When using with 470L use Tail Pitch Control Link (H47T022XXT)
• When using with 470L use Tail Pitch Control Link (H47T022XXT)
Content
• 1x 470 Metal Tail Rotor Holder
• 1x Screw
• 2x MR74ZZ-d35 C2 Bearing (3.5x7x2.5mm)
• 2x MR63ZZ C2 Bearing (3x6x2.5mm)
• 2x Thrust Bearing F3-6M (3x6x2.8mm)
• 2x Washer (3x4.8x0.3mm)
• 2x Washer (2x4.8x0.6mm)
• 2x Socket Collar Screw (M2x6mm)
• 2x Screw (M2x6.5mm)
• 2x Socket collar screw (M2x9mm)
• 1x 470 Metal Tail Rotor Holder
• 1x Screw
• 2x MR74ZZ-d35 C2 Bearing (3.5x7x2.5mm)
• 2x MR63ZZ C2 Bearing (3x6x2.5mm)
• 2x Thrust Bearing F3-6M (3x6x2.8mm)
• 2x Washer (3x4.8x0.3mm)
• 2x Washer (2x4.8x0.6mm)
• 2x Socket Collar Screw (M2x6mm)
• 2x Screw (M2x6.5mm)
• 2x Socket collar screw (M2x9mm)
300X / 450DFC M2 socket collar screw (H45185)
Content
• 4x Socket collar screw (M2x15mm)
• 4x Washer (2x3.6x0.2mm)
• Use for T-REX 300X and 450 DFC
Content
• 4x Socket collar screw (M2x15mm)
• 4x Washer (2x3.6x0.2mm)