Helicopters

Sort By:  
99.43€  Inc Tax
119.56€
O.S. Engines MAX 105HZ-R with Powerboost Pipe 105 (OS18751) (OS18751)
O.S. Engines is a leading manufacturer of single- and multi-cylinder model aircraft engines ranging from small two-stroke to "giant-scale" four-stroke radial engines. Japanese model engine manufacturer that produces very affordable and yet easy to use engines which won acclaim for their performance and durability.

MAX 105HZ-R with Powerboost Pipe 105 (OS72146000)

The biggest, pure helicopter engine that OS have ever made delivers the levels of torque and power demanded by top fliers for both '3D' and sport applications. The 15% increase in capacity offers a big increase over the .91 class engines yet still fits in mounts designed for that class.

Features:
Easy carburetor adjustment that stays in tune
More torque in the mid range for 3D
Velocity stack on carburetor sucks cool, undisturbed air from the fan flow
Power output of a 105HZ with 15% nitro is similar to a power of 91HZ with 30% nitro

The latest DRS system (Demand Regulator System) uses a crankcase pressure tap-off to pressurize the fuel tank via a one-way valve. The pressurized fuel is then carefully regulated at the carburetor to provide the optimum mixture no matter what demands are placed on it. This is done by using the negative pressure in the carburetor Venturi as part of the regulation system.

The carburetor itself has three mixture controls for low/mid and high speed settings. Once set for the fuel demands of your model/type of fuel and muffler, there is rarely any need to change those settings again.

The main mechanics of the engine itself are the same as with the regular MAX 105HZ engine.

Standard accessories:
Glow Plug No.7, 8, 10
Powerboost Pipe 90/105

Specifications:
Displacement: 17.17cc
Bore: 29.0mm
Stroke: 26.0mm
Output: 3.8ps / 3.75hp / 15000 rpm
Practical rpm range: 2000-16500 rpm
Weight: 608g (engine)

559.37€  Inc Tax
Syma S5 SPEED 3 Ch. Helicopter RTF (white) (SYS5)
Syma S5 SPEED RTF (ready to fly) Helicopter 
3 CHANNEL REMOTE CONTROL HELICOPTER SERIES

GYRO System:
Gyroscope system can constantly adjust the aircraft Various spin phenomena in flight; helicopter is more stable in flight and easier to operate.

COLORFUL FLASHING LIGHTS:
Colorful flashing light, nice feature when flying at night.

DOUBLE PROTECTION:
Helicopter will power-off automatically when rotor is chocked.

WHAT'S IN THE BOX:
RC Helicopter
Remote Control (batteries not included)
Charger
Operating Instructions
Tail blade

26.84€  Inc Tax
MS Composit CFC tail blades 105mm /5/3mm (MS-700105)
CFC Tail Blades 105 mm/5/3

MS Composit manufactures a broad line of carbon composite tail rotor blades.
The tail rotor blades manufacturing technology is derived from the main rotor blades, and ensures high blade performance in all situations.
All MS Composits tail rotor blades are dynamically balanced and tested for overload. The security factor (blade dynamic overload) is 2.1 for all types of tail blades.

Technical specifications:
Length: 105 mm
Blade type: Standard
Root: 5 mm
Bolt: 3 mm
Profile: Symmetrical
Weight: 6.5 g

Suitable for (RC) radio controlled helicopters and other models.

25.62€  Inc Tax
MS Composit CFC tail blades 115mm /5/3mm (MS-700115)
CFC Tail Blades 115 mm/5/3

MS Composit manufactures a broad line of carbon composite tail rotor blades.
The tail rotor blades manufacturing technology is derived from the main rotor blades, and ensures high blade performance in all situations.
All MS Composits tail rotor blades are dynamically balanced and tested for overload. The security factor (blade dynamic overload) is 2.1 for all types of tail blades.

Technical specifications:
Length: 115 mm
Blade type: Standard
Root: 5 mm
Bolt: 3 mm
Profile: Symmetrical
Weight: 6.5 g

Suitable for (RC) radio controlled helicopters and other models.

26.84€  Inc Tax
MS Composit CFC tail blades 95mm /5/3mm (MS-700105)
CFC Tail Blades 95 mm/5/3

MS Composit manufactures a broad line of carbon composite tail rotor blades.
The tail rotor blades manufacturing technology is derived from the main rotor blades, and ensures high blade performance in all situations.
All MS Composits tail rotor blades are dynamically balanced and tested for overload. The security factor (blade dynamic overload) is 2.1 for all types of tail blades.

Technical specifications:
Length: 95 mm
Blade type: Standard
Root: 5 mm
Bolt: 3 mm
Profile: Symmetrical
Weight: 3 g

Suitable for (RC) radio controlled helicopters and other models.

23.79€  Inc Tax
MS Composit Bushing insert for 4mm bolts (4x5x12) - 2 pcs. (MS-00013)
MS Composit Bushing inserts for 4mm bolts (4x5x12) - 2 pieces

Use with MS Composit Rapid FBL carbon rotor blades when using 4mm bolts

3.05€  Inc Tax
700 mm/12/5mm Rapid FBL - MS Composit CFC main blades (MS-R90700FBL)
Specification:

Weight: 190g
Width: 64mm
Length: 700mm
Root: 12mm
Hole: 5mm

93.33€  Inc Tax
690 mm/12/5mm Rapid FBL - MS Composit CFC main blades (MS-R90690FBL)
Specification:

Weight: 185g
Width: 64mm
Length: 690mm
Root: 12mm
Hole: 5mm

93.33€  Inc Tax
650 mm/12/5mm Rapid FBL - MS Composit CFC main blades (MS-R55650FBL)
Specification:

Weight: 175g
Width: 64mm
Length: 650mm
Root: 12mm
Hole: 5mm

Use with Goblin Nitro and others,..

93.33€  Inc Tax
620 mm/12/4mm Rapid FBL - MS Composit CFC main blades (MS-R50620FBL)
Specification:

Weight: 130g
Width: 54mm
Length: 620mm
Root: 12mm
Hole: 4mm

80.52€  Inc Tax
550 mm/12/4mm Rapid FBL - MS Composit CFC main blades (MS-R30550FBL)
Specification:

Weight: 115g
Width: 54mm
Length: 550mm
Root: 12mm
Hole: 4mm

75.03€  Inc Tax
420 mm/5/3mm Rapid FBL - MS Composit CFC main blades (MS-R20420FBL)
Specification:

Weight: 50g
Width: 43mm
Length: 420mm
Root: 5mm
Hole: 3mm

Use with: Goblin 420 and others,..

48.19€  Inc Tax
360 mm/5/3mm Rapid FBL - MS Composit CFC main blades (MS-R20360FBL)
Specification:

Weight: 40g
Width: 43mm
Length: 360mm
Root: 5mm
Hole: 3mm

46.97€  Inc Tax
380 mm/5/3mm Rapid FBL - MS Composit CFC main blades (MS-R20380FBL)
Specification:

Weight: 45g
Width: 43mm
Length: 380mm
Root: 5mm
Hole: 3mm

Use with: Goblin 380 and others,..

46.97€  Inc Tax
325 mm/4.5/3mm Rapid FBL - MS Composit CFC main blades (MS-R20325FBL)
Specification:

Weight: 23g
Width: 33mm
Length: 325mm
Root: 4,5mm
Hole: 3mm

Use with: Mini Titan, T-Rex 450/V2/V2PRO, Blade 400 and others,..

32.33€  Inc Tax
60cm/12/4mm Rapid FBL - MS Composit CFC main blades (MS-R50600FBL)
Specification:

Weight: 125g
Width: 54mm
Length: 600mm
Root: 12mm
Hole: 4mm

80.52€  Inc Tax
O.S. Engines PowerBoost Pipe 55 III (OS72149000) (OS72149000)
O.S. Engines is a leading manufacturer of single- and multi-cylinder model aircraft engines ranging from small two-stroke to "giant-scale" four-stroke radial engines. Japanese model engine manufacturer that produces very affordable and yet easy to use engines which won acclaim for their performance and durability.

O.S. PowerBoost Pipe 55 III (OS72149000)

Tuned muffler system especially designed to match to the new MAX 55HZ and MAX 55HZ-R engines. It can be also used with 50SX-H Hyper helicopter engines. It comes with the new design feature of through mounting holes - muffler is secured with a spring washer and a nut

Features:
Polished Aluminum pipe
High performance from hovering to the highest RPM

Specification:
Length: 281mm
Distance Between Mounting Holes: 37mm
Exhaust Outlet Diameter: 9mm

119.56€  Inc Tax
Blade Nano S2 - BNF (BLH1380)
Overview

The best micro RC collective pitch helicopter gets even better! Like the Nano CP S model before it, the Blade® Nano S2 heli lays a path to 3D aerobatic expertise that's paved for success — with new features, including a redeveloped stabilizing system, that make challenging maneuvers such as flips and inverted flight easy for pilots at all skill levels to master.
Blade developers first brought SAFE® stabilizing technology to the Nano heli platform with the Nano CP S. If pilots felt disoriented, all they needed to do was press the Panic Recovery button. SAFE technology immediately came to the rescue, locking the model in a perfectly level attitude.

Now the Nano S2 micro introduces more innovations for even greater stability and confidence-building control. The custom-tuned AS3X® system at the heart of its SAFE technology has been improved. So has the performance of the SAFE Angle Demand and Panic Recovery features. New to the Nano platform, SAFE Z Altitude Control uses the heli's on-board accelerometer to maintain a consistent altitude. And the new flight controller has been mounted vertically to improve damping and remove vibration to the gyro.

As a result, the Nano S2 is easier to control than ever, and the performance is dazzling. Like the previous Blade Nano models, this one is full of aerobatic tricks. Its collective pitch design accommodates everything from gentle hovering to daring, advanced maneuvers. Strong coreless motors and a 45C LiPo flight battery produce capable power for 3D flight. Linear servos deliver the muscle for impressive control authority.

Construction with super-resilient polymers along with a carbon-fiber main shaft and tail boom give the model's lightweight airframe amazing durability. Most impacts that occur while practicing 3D maneuvers cause no harm. If you do happen to need a repair, nearly all of the parts from the Nano CP S are compatible with the new Nano S2.

Key Features
The Blade® Nano CP S heli features exclusive SAFE (Sensor Assisted Flight Envelope) technology, the revolutionary electronic flight protection system that enables anyone to fly with confidence. With SAFE technology's versatile flight mode system, you can choose the right amount of assistance with the flip of a switch.

Three Flight Modes
Stability - Z mode: Limited flight envelope with self-leveling and a low bank angle limit as well as software dampened pitch control.
Stability mode: Limited flight envelope with self-leveling and a low bank angle limit.
Agility mode: Full control authority with no bank angle limit.

Panic Recovery Mode

Instantly recovers the heli to a level altitude to prevent crashes. If you lose orientation, just press the Panic Recovery button and you'll recover to a level attitude.

New

SAFE Z Altitude Control helps keep the heli at a consistent altitude via accelerometer programming.

Collective Pitch

Provides limitless flight capabilities

Durable

Virtually indestructible! Great for learning advanced maneuvers with confidence.

Additional Features

Powerful - Powerful coreless motors allow for advanced 3D maneuvers.
Light Weight - Low disc loading for advanced aerobatics.
Linear Servos - Provide faster response and better holding torque over normal rotary servos.
45C LiPo Battery - High power output for limitless aerobatics.
USB Charger - Provides charge-anywhere convenience.

Needed to Complete
Compatible DSMX®/DSM2® transmitter

What's in the Box?

(1) Factory-assembled Nano S2 micro helicopter
(1) Factory-installed Spektrum 2.4GHz DSMX receiver
(1) 150mAh 1S LiPo battery
(1) USB LiPo battery charger
(1) Product Manual


99.43€  Inc Tax
119.56€
Align T-Rex 150X DFC Super Combo (RH15E04X)
• Brand new 150 GRS Flight Controller Unit. Set up and update the flight parameter settings via APP Interface.
• 6-axis Gyro - 3-axis gyroscope + 3-axis accelerometer using a superior ARM Cortex-M4 32-bits processor.
• Attitude Auto-level Mode & Rescue Mode.
• Brand new DFCS (Direct Flight Control System) Controller allows to control real time flight.
• BL Heli ESC allows faster motor feedback and precise flying performance.
• Integrates main motor & tail motor in a dual system output. Also it adopts a high-speed and powerful micro MCU processor, which features low-voltage, low-temperature, and lost and found protection.
• Built-in Receiver: Futaba S-FHSS 2.4GHz System.
• Compatible with Spektrum DSM2/DSMX, JR DSM2/DMSS satellite.
• Rigidity Main Frame.
• Fully metal CNC CCPM Swashplate.
• New tail motor plug mount makes maintenance easy.

Specifications

Length: 255mm
Height: 80mm
Main Blade Length: 120mm
Main Rotor Diameter: 271mm
Tail Rotor Diameter: 45mm
Motor Pinion Gear: 10T
Main Drive Gear: 78T
Weight (w/o Battery): 53g

Content

• 1x T-REX 150X DFC
• 4x Main Blade (2 Sets)
• 1x Tail Blade
• 1x 150M Brushless Main Motor
• 1x 150MT Brushless Tail Motor
• 1x DS155 Digital Servo
• 2x DS150 Digital Servo
• 1x Bind Plug
• 1x Remote Extension
• 2x 7.4V Li-Po 250mAh Li-Polymer Battery
• 1x 150 Carry Box-Black (292x160x69mm)
• 2x 1.3mm Hexagon screw driver (Blue/8.2g)
• 1x 0.9mm Hexagon screw driver (Red/8g)
• 1x Parts box E (78.5x60.9x21mm)
• 1x Parts box A (52x40x12mm)
• 1x CH150 Li-Po Charger

Required for assembly

• 1x Transmitter (min. 6-CH, Futaba S-FHSS System compatible or Spektrum with Satellite)

259.86€  Inc Tax
Syma S107H 3 Ch. Helicopter RTF (red) (SYS107HR)
Syma S107H 3-Ch. 2.4GHz Hoover Function Remote Control Helicopter

FEATURES:
Hover function
With the advanced barometric pressure sensor technology the helicopter hoovering function is greatly improved.

One key take off/landing
Helicopter can take off/land gradually by pressing only one button on the remote control.

Gyro stabilizer system
Gyroscope system constantly corrects for environmental factors during the flight, which makes it even easier and more stable to control.

Low-Voltage Protection
When the helicopter battery is low, the helicopter indicator lights will start flashing.

Crash Protection
When the helicopter is flying and the propellers collide with any objects or get jammed, it’s safety feature will be activated and stop the helicopter.

Speed modes button
Beginner and advanced mode

WHAT’ S IN THE BOX
• RC Helicopter
• Remote Control (batteries not included)
• Tail blade
• Operating instructions
• Screwdriver
• USB Charge cable

34.77€  Inc Tax
O.S. Engines MAX 105HZ with 61E Carburetor (OS18700) (OS18700)
O.S. Engines is a leading manufacturer of single- and multi-cylinder model aircraft engines ranging from small two-stroke to "giant-scale" four-stroke radial engines. Japanese model engine manufacturer that produces very affordable and yet easy to use engines which won acclaim for their performance and durability.

MAX 105HZ-R with 61E Carburetor (OS18700)

The biggest, pure helicopter engine that OS have ever made delivers the levels of torque and power demanded by top fliers for both '3D' and sport applications. The 15% increase in capacity offers a big increase over the .91 class engines yet still fits in mounts designed for that class.

Features:
Easy carburetor adjustment that stays in tune
More torque in the mid range for 3D
Velocity stack on carburetor sucks cool, undisturbed air from the fan flow
Power output of a 105HZ with 15% nitro is similar to a power of 91HZ with 30% nitro

The carburetor itself has three mixture controls for low/mid and high speed settings. Once set for the fuel demands of your model/type of fuel and muffler, there is rarely any need to change those settings again.

Standard accessories:
Glow Plug No.7, 8, 10
Powerboost Pipe 90/105

Specifications:
Displacement: 17.17cc
Bore: 29.0mm
Stroke: 26.0mm
Output: 3.7ps / 3.65hp / 15000 rpm
Practical rpm range: 2000-16500 rpm
Weight: 596g (engine)

339.77€  Inc Tax
O.S. Engines MAX 105HZ-R with 61G Carburetor (OS18750) (OS18750)
O.S. Engines is a leading manufacturer of single- and multi-cylinder model aircraft engines ranging from small two-stroke to "giant-scale" four-stroke radial engines. Japanese model engine manufacturer that produces very affordable and yet easy to use engines which won acclaim for their performance and durability.

MAX 105HZ-R with 61G Carburetor  (OS18750)

The biggest, pure helicopter engine that OS have ever made delivers the levels of torque and power demanded by top fliers for both '3D' and sport applications. The 15% increase in capacity offers a big increase over the .91 class engines yet still fits in mounts designed for that class.

Features:
Easy carburetor adjustment that stays in tune
More torque in the mid range for 3D
Velocity stack on carburetor sucks cool, undisturbed air from the fan flow
Power output of a 105HZ with 15% nitro is similar to a power of 91HZ with 30% nitro

The latest DRS system (Demand Regulator System) uses a crankcase pressure tap-off to pressurize the fuel tank via a one-way valve. The pressurized fuel is then carefully regulated at the carburetor to provide the optimum mixture no matter what demands are placed on it. This is done by using the negative pressure in the carburetor Venturi as part of the regulation system.

The carburetor itself has three mixture controls for low/mid and high speed settings. Once set for the fuel demands of your model/type of fuel and muffler, there is rarely any need to change those settings again.

The main mechanics of the engine itself are the same as with the regular MAX 105HZ engine.

Standard accessories:
Glow Plug No.7, 8, 10
Powerboost Pipe 90/105

Specifications:
Displacement: 17.17cc
Bore: 29.0mm
Stroke: 26.0mm
Output: 3.8ps / 3.75hp / 15000 rpm
Practical rpm range: 2000-16500 rpm
Weight: 608g (engine)

419.68€  Inc Tax
O.S. Engines MAX 55HZ-R with 40L-R Carburetor (OS15650) (OS15650)
O.S. Engines is a leading manufacturer of single- and multi-cylinder model aircraft engines ranging from small two-stroke to "giant-scale" four-stroke radial engines. Japanese model engine manufacturer that produces very affordable and yet easy to use engines which won acclaim for their performance and durability.

MAX 55HZ-R

The latest engine in the 600/50 helicopter class borrows much of its technology from the fabulous MAX 105HZ-R, to provide class leading power under the most demanding conditions in 3D flying.

The latest DRS system (Demand Regulator System) uses a crankcase pressure tap-off to pressurize the fuel tank via a one-way valve. The pressurized fuel is then carefully regulated at the carburetor to provide the optimum mixture no matter what demands are placed on it. This is done by using the negative pressure in the carburetor Venturi as part of the regulation system.

The carburetor itself has three mixture controls for low/mid and high speed settings. Once set for the fuel demands of your model/type of fuel and muffler, there is rarely any need to change those settings again.

The main mechanics of the engine itself are the same as with the regular MAX 55HZ engine.

Standard accessories:
Glow Plug No.7, 8, 10
Powerboost Pipe 55/II/III

Specifications:
Displacement: 8.93cc
Bore: 23.0mm
Stroke: 21.5mm
Output: 2.1ps / 2.07hp / 17000 rpm
Practical rpm range: 2000-20000 rpm
Weight: 429g (engine)

329.40€  Inc Tax
O.S. Engines MAX 50SX-H Ring Hyper (OS15550) (OS15550)
O.S. Engines is a leading manufacturer of single- and multi-cylinder model aircraft engines ranging from small two-stroke to "giant-scale" four-stroke radial engines. Japanese model engine manufacturer that produces very affordable and yet easy to use engines which won acclaim for their performance and durability.

The best '50-class' engine on the market just became better with the introduction of the 50SX-H Hyper.

CNC machined cylinder head has been developed to give better power and improved cooling at the same time. The new carburetor has also been improved to help extract more power than the standard engine without sacrificing the throttle precision you have come to expect from OS helicopter engines.


Standard accessories:
Glow Plug No.7, 8, 10

Specifications:
Displacement: 8.17cc
Bore: 22.0mm
Stroke: 21.5mm
Output: 1.9ps / 1.87hp / 17000 rpm
Practical rpm range: 2000-20000 rpm
Weight: 406g (engine)

229.97€  Inc Tax
HeliArtist AS350 Ecureuil (Air Zermatt) - 450 Size helicopter (HA450AS35AZ)

HeliArtist Scale GFC fuselage includes clear plastic windows, antennas and landing skids with rails. 
Air Zermatt AS350 scale fuselage fits most of the 450 size helicopter mechanics on the market with 315-335mm size rotor blades.


Fit 450 mechanics:

• T-REX450 XL / SE / SE V2 / Sport / Sport V2 / PRO
• Mini Protos
• Walkera 450
• Dragonus II 450
• Titan E325
• Belt-CP
• Helipro 450
• HK-450
• Tarot 450
• CopterX 450
• KDS 450
• TITAN 3D-450
• and similar


Technical data:

Height: 225mm
Width: 175mm
Length: 760mm
Weight: 320g

Unfortunately fuselage does’t fit T-REX 450L!


130.54€  Inc Tax
470L Tail Rotor Holder (H47T006XXT)
• Use for T-REX 300X / 450 / 470L

• When using with 450 use Tail Pitch Assembly (HS1304B)
• When using with 470L use Tail Pitch Control Link (H47T022XXT)

Content
• 1x 470 Metal Tail Rotor Holder
• 1x Screw
• 2x MR74ZZ-d35 C2 Bearing (3.5x7x2.5mm)
• 2x MR63ZZ C2 Bearing (3x6x2.5mm)
• 2x Thrust Bearing F3-6M (3x6x2.8mm)
• 2x Washer (3x4.8x0.3mm)
• 2x Washer (2x4.8x0.6mm)
• 2x Socket Collar Screw (M2x6mm)
• 2x Screw (M2x6.5mm)
• 2x Socket collar screw (M2x9mm)



17.69€  Inc Tax
V2 Tail Rotor Hub (H60157B)
for T-REX 550E / 600E / 600N / 700E / 700N

Must use with:

• V2 Metal Tail Rotor Holder/Silver HN6103B

Features:
• Weight: 10.7g

Content:
• 1x V2 tail rotor hub (10x39.6mm)
• 4x Tail rotor washer (8x10x0.3mm)
• 2x M4 set screw (M4x4mm)
• 2x Socket collar screw (M3x8mm)



7.32€  Inc Tax
Align T-rex 700XN RC Helicopter Kit (Nitro) (RH70N12X)

How long have you not heard roaring sound of engine? How long have you not had passionate feelings? The new combination of innovation, steel, light weight and precision, the ultimate in perfect technology in one, that’s new generation T-REX 700XN.

T-REX 700XN adopts the new direct to swashplate servo design, compared with previous generation T-REX 700N double push-pull mode control, providing precise and fast control! With 700EFL Flybarless Rotor Head System utilize extreme low CG design, effectively reduces resistance during 3D maneouvers, increased flight responsiveness and precision. Designed to maintain a 90-degree symmetrical angle between the Rotor Grip Arms and Linkage Rods for superior and stable flight performance. Engineered Narrow Body Design efficiently decrease gear abrasion and frame deformation during flight. T-REX 700XN maintain the proper Center of Gravity CG, moving the engine forward allowed the fuel tank to be positioned in the centre of the main shaft to maintain consistent CG as the fuel level changes during flight.

The new steel alloy clutch liner is durable with temperature control avoiding the exploding clutch liner or breaking clutch housing, the lifetime is over 1000 flights. Receiver mount provides cable and wiring protection, easy to maintain and assemble by removing a few screws from the mainframe.

For electronic equipment, high voltage output: 6A 7.4V BEC with down / regulation system for stable power to the CCPM server channel for receivers and servos. Includes a built-in one-button push glow plug igniter eliminating the hassle of using traditional electric clip plug on igniters. Also increased external high-frequency filter capacitance to effectively reduce the interference generated by external noise; such as high-speed and high torque servos. The brand new DS820M/DS825M high voltage brushless servo and brushless motor for fast speed, high torque, and superior, efficient reaction time allows the Align 700XN precise, fast performance. The new CNC machined aluminium case design is aesthetically appealing while acting as a highly efficient heat sink.

The new generation of T-REX 700XN has a number of innovative design, detonating your inner soul and once again feeling the original passion!


Key features:
- New lightweight canopy made from glass fibre and carbon fibre
- Progressive lightweight landing skids, tilted 5° forwards
- Narrow frame design
- Direct connect servo design
- Main rotor grip arm and linkage rod connected at 90° for symmetry
- New easy maintenance receiver mount
- CNC metal reinforcement plate and brace - for torsional stiffness of the frames
- Single piece CNC engine mount
- Tail servo mounted across the width of the model
- Thicker tail boom braces (8mm)
- Latest tail rotor hub design with M4 bolts

Specification
  • Length: 1346mm
  • Height: 384mm
  • Width: 202mm
  • Main Blade Length: 700mm
  • Main Rotor Diameter: 1570mm
  • Tail Rotor Diameter: 281mm
  • Motor Drive Gear:13T
  • Main Drive Gear:107T
  • Autorotation Tail Drive Gear: 104T
  • Tail Drive Gear: 22T
  • Drive Gear Ratio: 8.23:1:4.73
  • Fuel Tank Capacity: 630cc.
  • Takeoff Weight: Approx. 4540g



Kit includes:
- T-Rex 700XN Dominator
- 700 Carbon fibre main blade set
- 106mm 3K Carbon fibre tail blade set
- BT6X 2 in 1 High Voltage regulator (NEW)


Required for assembly
• 1x Transmitter (7-channel or more, helicopter system)
• 1x Receiver (7-channel or more)
• 1x Engine starter
• 1x Flybarless system
• 1x Throttle Servo (Standard size)
• 3x Swashplate Servo (Standard size)
• 1x Tail Servo (Standard size)
• 1x Governor System (if not integrated in Flybarless System)
• 1x Digital pitch gauge
• 1x Fuel pump
• 1x Engine fuel
• 1x 90~105 Muffler
• 1x 90~105 Engine
• 1x Receiver battery



918.66€  Inc Tax
Align 450 DFC M2 Socket Collar Screw (H45185)
for T-REX 300X and 450 with DFC

Content:
4x Socket collar screw (M2x15mm)
4x Washer (2x3.6x0.2mm)


4.27€  Inc Tax
Align 450 Slant Thread Main Drive Gear, M0.6 / 121T (H45156QA)
for T-REX 450 Series

Specification:
• New style high strength 121 tooth Mod 0.6 helical main hear for 450 size helis. The increase gear pitch can withstand higher power, at the same time minimize operational noise. A great upgrade to withstand the modern high power system.
• Utilizes high strength polymer plastic with excellent rigidity and flexibility characteristics.
• Patented unique built in fan design to create induced air flow, effectively cooling electronics and motor.

Features:
• Gear ratio: 1:10.08
• Weight: 35.3g

Content:
3x CNC Slant Thread Main drive gear, M0.6, 121T


6.10€  Inc Tax
Per Page      1 - 30 of 33