Batteries

• Gens ace Batteries R6-AA Cells Ni-Mh 2700Mah (4)
• 50x14mm, 120g

• Gens ace Battery LiPo 3S 11.1V 2200mAh 30C (Deans connector)
• 108x33x22mm
• 175g

• 1300mah 6S pack rated at 30C continuous, with a burst of 50C
• 12AWG Silicon wires and JST-XH balance connector
• 138mm x 33mm x 22mm
• Weight 237g +/-5g

Voltage sensing 2 to 8.2V
Charges and balances at up to 2C in flight
Universal JR connector
JST-XH Balance connection to main board
LED System Status
5A continuous & 10A peak rated intermittent
Total weight just 40 grams
Also available & sold as separate part items
Vibration Proof flexible board
Automotive Industry quality components

• When using the optional external LED device these will flash brightly to indicate that the board has been activated due to a problem.
• During normal use, the board will charge the 2S 430mAh backup battery to a maximum 4v per cell.
• Developed initially for use in RC Helicopters with world and European champions
• Voltage Sensing 2 – 8.2V
• Universal JR connector
• LED system status indicator
• 5A continuous & 10A peak rated when supplying power
• Only 40g
• Vibration proof flexi board
• Automotive industry quality components
• Manufactured in Europe

• The Ultra Guard 430 is the perfect back up power solution for any form of RC be it flight, surface or water.
• The UG430 simply plugs into a spare receiver port of any brand or receiver.
• When the model is powered up either via the ESC, separate BEC or Receiver Pack the board is able to recognise the systems operating voltage from 4.8V to 8.4V. It will then log that as the voltage to supply back into the receiver should an issue arise.
• If for any reason the UG430 is not receiving a voltage from the receiver it knows there has been an issue, it will the return the correct operating voltage to the receiver to allow the model user to safely return the model.

• Gens ace Battery LiPo 3S 11.1V 6000mAh 50C (Deans)
• 139x46x40mm
• 395g

• Gens ace Battery NiMh 7.2V-5000Mah (Tamiya)
• 135x48x25mm
• 420g

• 5000mah 6S pack rated at 50C continuous, with a burst of 100C
• 10AWG Silicon wires and JST-XH balance connector
• 160mm x 43mm x 44mm
• Weight 726.4g +/-5g

• 5800mah 2S pack rated at 100C
• 1.5mm thick ABS case with Ultrasonic welding to all seams
• 1-2C recommended charge rate for maximum cycle life
• 3C Max charge rate, no performance gain past this point
• 5mm bullet connector
• Weight 280 +/-5g

• Gens ace LiPo 2S pack 7.4V-4000-45C (Deans plug)
• hard case
• 139x47x23mm
• 200g

• Gens ace LiPo 2S pack 7.4V-5500-50C (Deans plug)
• hard case
• 139x47x25mm
• 245g

Voltage sensing 2 to 8.2V
Charges and balances at up to 2C in flight
Universal JR connector
JST-XH Balance connection to main board
LED System Status
5A continuous & 10A peak rated intermittent
Total weight just 40 grams
Also available & sold as separate part items
Vibration Proof flexible board
Automotive Industry quality components

• When using the optional external LED device these will flash brightly to indicate that the board has been activated due to a problem.
• During normal use, the board will charge the 2S 430mAh backup battery to a maximum 4v per cell.
• Developed initially for use in RC Helicopters with world and European champions
• Voltage Sensing 2 – 8.2V
• Universal JR connector
• LED system status indicator
• 5A continuous & 10A peak rated when supplying power
• Only 40g
• Vibration proof flexi board
• Automotive industry quality components
• Manufactured in Europe

• The Ultra Guard 430 is the perfect back up power solution for any form of RC be it flight, surface or water.
• The UG430 simply plugs into a spare receiver port of any brand or receiver.
• When the model is powered up either via the ESC, separate BEC or Receiver Pack the board is able to recognise the systems operating voltage from 4.8V to 8.4V.  It will then log that as the voltage to supply back into the receiver should an issue arise.
• If for any reason the UG430 is not receiving a voltage from the receiver it knows there has been an issue, it will the return the correct operating voltage to the receiver to allow the model user to safely return the model.

• Gens ace Battery LiPo 3S 11.1V 1300mAh 30C (Deans)
• 76x37x24mm
• 115g

• Gens ace Battery LiPo 4S 14.8V 6000mAh 50C (Deans)
• 139x46x49mm
• 520g

• Gens ace Battery LiPo 2S 7.4V 2200 30C (XT60)
• 108x34x16mm
• 125g

• Gens ace Battery LiPo 2S 7.4V 1300mAh 30C (Deans)
• 75x34x15mm
• 85g

Voltage sensing 2 to 8.2V
Charges and balances at up to 2C in flight
Universal JR connector
JST-XH Balance connection to main board
LED System Status
5A continuous & 10A peak rated intermittent
Total weight just 40 grams
Also available & sold as separate part items
Vibration Proof flexible board
Automotive Industry quality components

• When using the optional external LED device these will flash brightly to indicate that the board has been activated due to a problem.
• During normal use, the board will charge the 2S 430mAh backup battery to a maximum 4v per cell.
• Developed initially for use in RC Helicopters with world and European champions
• Voltage Sensing 2 – 8.2V
• Universal JR connector
• LED system status indicator
• 5A continuous & 10A peak rated when supplying power
• Only 40g
• Vibration proof flexi board
• Automotive industry quality components
• Manufactured in Europe

• The Ultra Guard 430 is the perfect back up power solution for any form of RC be it flight, surface or water.
• The UG430 simply plugs into a spare receiver port of any brand or receiver.
• When the model is powered up either via the ESC, separate BEC or Receiver Pack the board is able to recognise the systems operating voltage from 4.8V to 8.4V. It will then log that as the voltage to supply back into the receiver should an issue arise.
• If for any reason the UG430 is not receiving a voltage from the receiver it knows there has been an issue, it will the return the correct operating voltage to the receiver to allow the model user to safely return the model.

• BEC Guard eliminates back EMF
• BEC Guard smooths the voltage output, eliminating voltage fluctuations which can reduce “brown outs” caused by momentary low BEC voltages
• Eliminates voltage spikes to receiver in excess of 10V
• Can eliminate over voltage up to 100V, thereafter shuts down protecting the radio equipment from over voltage.
• If used in conjunction with ULTRA GUARD, in the event of the over voltage hitting 100V and the subsequent shutdown the ULTRA GUARD would then take over and supply the backup power for safe retrieval of the model.

• Gens ace Battery LiPo 3S 11.1V 1000 30C (Deans)
• 75x37x20mm
• 100g

• Gens ace Battery LiPo 2S 7.4V 2500mAh 30C (XT60)
• 136x42x12mm
• 150g

• Gens ace Battery LiPo 2S 7.4V 800mAh 40C (JST)
• 61x30x15mm
• 48g

• 1600mah 6S pack rated at 30C continuous, with a burst of 80C
• 12AWG Silicon wires and JST-XH balance connector
• 108mm x 33mm x 34mm
• Weight 273g +/-

• Gens ace LiPo 3S Pack 11.1V-4000-50C (Deans plug)
• hard case
• 139x46x25mm
• 280g

• Gens ace Battery LiPo 3S 11.1V 2200mAh 30C (XT60 connector)
• 108x33x22mm
• 175g