Tools

Sort By:  
7.93€  Inc Tax
C&Y Model Starter Rubber 36mm (8KM8313)
Replacement Rubber for Engine Starter 36mm

3.66€  Inc Tax
Professional Crimping Tool (N-FW-1306)
Professional Crimping Tool

Slot 1: AWG 24-30 for JR / Futaba Servo-Connectors (0,08qmm to 0,5qmm)
Slot 2: AWG 18-22 for AMP / TAM (0,3qmm to 0,75qmm)

Use this professional crimping tool for JR-style and BEC connectors

The integral ratchet makes the crimping procedure very simple and reliable.

Use this tool for crimping servo connectors on large aerobatic or scale (RC) radio controlled airplanes, helicopters, cars, trucks, buggies, boats and other models.

29.89€  Inc Tax
8S Battery Capacity Meter (1GT0108)
Battery Checker / Servo Tester / Balance Discharger

Capable of giving voltage and capacity readings on 2 - 8s Lithium packs and 4 - 12s Nickel packs, balance discharging Lithium packs and it can even test servos and ESC's.

With a simple to read LCD display and easy to operate buttons allowing you to cycle through the different readings, this is one the things that everybody should have in their flight box.

14.64€  Inc Tax
C&Y Model Sealing Iron Standard (8KM8330)
C&Y Model Sealing Iron Standard
  • 100 Hours Durability
  • With Adjustable Power

Can be used with Oracover and other covering films and foils

25.62€  Inc Tax
BAT-SAFE-XL Battery Safe Box (BAT-SAFE-XL)
BAT-SAFE-XL Battery Safe Charging and Storage Box

The simple solution to safely charge any battery containing lithium.
If you are into drones, FPV or Radio Controlled models, or just using LiPo batteries in other applications, be aware that they might catch on fire whilst charging.
The BAT-SAFE is a double walled insulated steel box with a flame arrestor. Any battery within the specifications will be no fire hazard if charged or stored inside the BAT-SAFE.
In case of an accident, the smoke and soot is also filtered by the flame arrestor.
BAT-SAFE did already save homeowners from losing their property.
It is easy to use, comes with a carrying handle and a removable charger stand.

You can charge and store up to a 4pc 6S 5000mAh equivalent (500Wh) safely inside the BAT-SAFE X large.

Charging space: 240x165x380mm
Outer dimensions: 305x230x445mm
Weight: 3.7kg

Never leave batteries unattended while charging!

99.43€  Inc Tax
BAT-SAFE Battery Safe Box (BAT-SAFE)
BAT-SAFE-XL Battery Safe Charging and Storage Box

The simple solution to safely charge any battery containing lithium.
If you are into drones, FPV or Radio Controlled models, or just using LiPo batteries in other applications, be aware that they might catch on fire whilst charging.
The BAT-SAFE is a double walled insulated steel box with a flame arrestor. Any battery within the specifications will be no fire hazard if charged or stored inside the BAT-SAFE.
In case of an accident, the smoke and soot is also filtered by the flame arrestor.
BAT-SAFE did already save homeowners from losing their property.
It is easy to use, comes with a carrying handle and a removable charger stand.

You can charge and store up to a 2pc 6S 5000mAh equivalent (222Wh) safely inside the BAT-SAFE.

Charging space: 240x165x102mm
Outer dimensions: 305x230x178mm
Weight: 1.85kg

Never leave batteries unattended while charging!

59.78€  Inc Tax
LiPo Battery Buzzer/Alarm 2-8S (2RCA0039)
Digital voltage meter for 2-8 cell LiPo, LiFe, Li-ion batteries with adjustable low voltage audible signal (buzzer/alarm) (2.70-3.80V). Also offers 4-15 V voltage measurement for NiXX batteries.

4.88€  Inc Tax
BAT-SAFE-MINI Battery Safe Box (BAT-SAFE-MINI)
BAT-SAFE-MINI Battery Safe Charging and Storage Box

The simple solution to safely charge any battery containing lithium.
If you are into drones, FPV or Radio Controlled models, or just using LiPo batteries in other applications, be aware that they might catch on fire whilst charging.
The BAT-SAFE is a double walled insulated steel box with a flame arrestor. Any battery within the specifications will be no fire hazard if charged or stored inside the BAT-SAFE.
In case of an accident, the smoke and soot is also filtered by the flame arrestor.
BAT-SAFE did already save homeowners from losing their property.
It is easy to use, comes with a carrying handle and a removable charger stand.

You can charge and store up to a 2pc 3S 2200mAh equivalent (50Wh) safely inside the BAT-SAFE-MINI.

Charging space: 165x100x50mm
Outer dimensions: 195x128x115mm
Weight: 0.7kg

Never leave batteries unattended while charging!

37.82€  Inc Tax
C&Y Model MosPower Power Panel (8KM8319)
The Mospower Power Panel

Solid state IC and POWER MOSFET driver design can be used with any type of 12 volt DC power source.

Three DC outputs are available:
  • 12V DC for starter
  • 12V for fuel pump
  • Adjustable MOSFET output for glow plug


20.13€  Inc Tax
C&Y Model Electric Fuel Pump 12V (8KM8325)
C&Y Model Electric Fuel Pump 12V

Features:
12V high speed fueling or defueling of radio controlled models
Includes fuel nozzle and filtered fuel can clunk
Special built in ports for attaching fuel lines

14.64€  Inc Tax
Glow Starte 1.5V AA Battery Powered (UR1410)
Features:
  • Convenient, economical, pocket-sized glow starting system.
  • Enough power for a full day use.
  • Simple thumb pressure locks the plug heater to the glow plug (no pushing or twisting).
  • Works with AA batteries.
  • Fits any glow plug including new 4-cycle glow plugs.


14.64€  Inc Tax
PowerBox Crimping tool Professional (7100)
PowerBox Crimping tool Professional

Use this professional crimping tool for JR-style and BEC connectors

The integral ratchet makes the crimping procedure very simple and reliable.

Use this tool for crimping servo connectors on large aerobatic or scale (RC) radio controlled airplanes, helicopters, cars, trucks, buggies, boats and other models.

35.99€  Inc Tax
G.T. Power Servo Tester (1GT0109)
G.T. Power 3 Mode CCPM Servo and ESC Consistency Tester

This portable device allows you to test the functionality of your servos and ESC without having to connect your radio, receiver and battery. Servos testers also allow you to easily center your servos when attaching servo horns and making control surface adjustments.

Features:
Three modes to check ESC or Servos:
Manual: Turn the knob with different speed and check the response time
Neutral: Test the center point of your servo
Automatic: Make the servo swing automatically to the greatest angle

Connect up to three servos at one time
Connect up to three ESCs at one time to test response time

Specification:
49x29x43mm
Input Voltage: 4.8-6V

10.98€  Inc Tax
SkyRC GNSS Performance Analyzer GSM020 (SK-500023-02)
SkyRC GNSS Performance Analyzer GSM020

The SkyRC GNSS Performance Analyzer Bluetooth Speed Meter & Data Logger makes it easy to see who really is the fastest. Examine the performance before and after the modifications. Now, you can prove your RC car or plane is the fastest on earth! The app-enabled GNSS Performance Analyzer in an affordable, compact device that will give you a cutting edge to measure the overall performance of your model accurately. Use the free app on your iOS or Android device, strap the GNSS Analyzer to your car, and get real time updates of how fast you are really going.

The device is small at just 40x39x16mm, and weighs just 38 grams. Plus, an internal antenna allows easy mounting in any model.

Features:
  • Know your speed - before and after modifications - right on your phone.
  • Improved accuracy using two satellite constellations: GPS and GLONASS systems.
  • Small but Versatile: measure and analyze Acceleration, G-force, Speed, Time, Distance, Height and Vertical Velocity of your RC car, truck buggy, aircraft and other models.
  • Built-in LiPo Battery: 5 hours of operating time.
  • Go Mobile with the App: With the free GNSS PA App, drivers can track and monitor the speed of their model remotely from an Android or iOS device.
  • Drag Race: The GNSS PA App software automatically charts slope on as time elapses. Saved runs can be read by the App, allowing analyzing of average speed, maximum speed, and acceleration within the given time and defined distance. You can also define your own performance windows for measuring braking time, acceleration (e.g., 0-30 km/h, 10-50 km/h, 10 meters or any custom setting), G-force measurement, Max Speed, Average Speed, Distance, High and Vertical Velocity.
  • Track Race: The meter can also be used as a speedometer and provides accurate logging of speed data.
  • Flying Mode: The meter measures average speed, maximum speed, time elapsed, distance and altitude.
  • Built-in 1M Memory: The built-in 1M memory can record up to 50 records. And all the data can be transferred to the smartphone for analyzing! When the Flash is full, the previous record will be replaced automatically.

Specifications:
Satellite Reception: GPS & GLONASS
Receiver: L1, 1575.42 MHZ
Update Frequency: 10 Hz
Antenna Type: Built In
Satellite Signal Reception Sensitivity: -167dBm
Dimensions: 40x39x16mm
Weight: 35g
Operating Temperature: 0°C - +40°C
Storage Temperature: -10°C - +70°C
Operating Humidity: 5% - 90%

Use this accessory (GPS logger) for (RC) radio controlled cars, trucks, buggies, airplanes, helicopters, boats and other models.

79.91€  Inc Tax
SkyRC GNSS Speed and Alt Meter (SK500024-01)
SkyRC GSM-015 GNSS Speed and Altitude Meter

Stop wondering how fast your RC car can run and how high your RC Airplane or helicopter can fly. Now all these data come at your finger with the GNSS SPEED METER by SkyRC. This gadget is ideal for RC racing/flying and casual biking, driving and long journey.

Measure Top Speed, Average Speed and Top Altitude

The user could easily view the screen while working out data such as speed, altitude, total mileage/kilometer, longitude/latitude. It also records the top speed and top altitude for instant recall after the running and helps RC fans much to fine-tune their RC gadgets to achieve better performance.

Reception of GPS & GLONASS Satellites
GSM-015 supports GNSS (Global Navigation Satellite System) with GPS and GLONASS system that means more satellites are orbiting the earth. The advantage of this many satellites will improve positional accuracy by tracking two satellite constellations instead of just one (GPS).

Built-in 1M Memory & Update frequency up to 10Hz
Update frequency is selectable from 1Hz to 10Hz. The higher update frequency is, the more accurate data the user will get. The built-in memory is 1M and can keep recording for 18 hours at 1Hz update frequency. And all the data can be transferred to PC and Mac and shown on Bing Maps. When the Flash is full, the previous record will be replaced automatically. No need to think about clearing data all the time or worry about missing the critical tracking data, when the memory is full.

Support both Metric and Imperial system of Measurement
The Metric and Imperial systems can be switched easily at the user’s finger. Hold and press the MODE button to change.

It comes with a built-in rechargeable LiPo battery. The capacity is 200 mAh and the operating time is up to 150 minutes.

PC link for data logging & Bing Maps
The GNSS LOGGER software is compatible with Windows 7 and above or macOS 10.12 and above.

With GNSS LOGGER, the user could:
Transfer the log data to computer and show the track data on built-in globally accessible Bing Maps
Save the log data to computer
Change Metric and Imperial system of measurement
Change time zone
GNSS update rate selection
Firmware upgrade

79.30€  Inc Tax
Graupner Remote Glow Plug Clip with Short Neck (GR1669)
Graupner Remote Glow Plug Clip/Connector with short neck

Spring loaded glow plug clip
Length: 75mm

5.49€  Inc Tax
C&Y Model Mosfet Power Multi Function Panel with Fuel Pump (8KM8320)
Mosfet Power Multi Function Panel

Features:
  • Adjustable glow plug current outlet
  • Electric powered fuel pump 
  • Switch selectable fuel direction for fueling/defueling
  • Colour coded 12V starter outlets
  • Dedicated glow plug igniter ports


37.82€  Inc Tax
EVA Foam Model Stand (7HY013A-00502)
Foam plane holder for assembly in the workshop or assembly at the airport.

Dimensions: 59 × 30 × 36cm.
Made of EVA foam.


Use this accessory for radio controlled (RC) airplanes and other models

25.62€  Inc Tax
Graupner OTG Cable (micro USB - micro USB) 0.5m (GR33002.OTG0M5)
With the Graupner Micro-USB OTG cable you can connect and transfer data between any compatible Android Smartphone when using the Graupner HoTT viewer (available on Google Play store).

The cable connects the mz-12 PRO, mz-16, mz-32, mc-26 and mc-28 radios to the Android Smartphone without the need for a Bluetooth device.

This cable is an excellent addition when using the Smartphone holder to connect the phone and radio.


Use this accessory for radio controlled (RC) airplanes, helicopters, drones and other models.

7.32€  Inc Tax
Radiolink Trainer Cable (1RL0058)
Radiolink Trainer Cable


Use this accessory for radio controlled (RC) airplanes, helicopters and other models.

9.76€  Inc Tax
Spiral fuel hose (line) for petrol (5/3mm) (7HY005-00604)
Spiral fuel hose (line) for petrol.

Size: 5mm outer and 3mm inner diameter


Fuel line/hose for radio controlled model engines. Use for petrol fuel.

7.32€  Inc Tax
C&Y Model Hand Crank Fuel Pump (8KM8324)
  • More convenient and easier control by its manual design and updated shape
  • High volume, geared pumping mechanism
  • Compact, durable glass-filled nylon construction
  • Work in both forward and reverse
  • Includes fuel nozzle and filtered fuel can clunk
  • Can be used both with gas oil and engine fuel


12.81€  Inc Tax
TFL Flat Tip and PH Screwdriver Set - 4.0/6.0mm (4 pcs) (TT1604-05BK)
TFL Racing Flat Tip and PH Screwdriver Set

Package: 4 pieces
Flat tip: 4.0/6.0mm
Phillips: 4.0/6.0mm


Use this tools for radio controlled (RC) airplanes, helicopters, onroad and offroad cars, buggies, trucks, crawlers and other models

22.57€  Inc Tax
TFL Flat Tip and PH Screwdriver Set - 3.0/5.0mm (4 pcs) (TT1604-02BK)
TFL Racing Flat Tip and PH Screwdriver Set

Package: 4 pieces
Flat tip: 3.0/5.0mm
Phillips: 3.0/5.0mm


Use this tools for radio controlled (RC) airplanes, helicopters, onroad and offroad cars, buggies, trucks, crawlers and other models

22.57€  Inc Tax
TFL Racing Cross Hex Wrench - Inner 2.5/5.0mm Outer 5.5/8.0mm (TT1606-01)
TFL Racing Cross Hex Wrench - inner 2.5/5.0mm and outer 5.5/8.0mm

Tool for 1:8 and 1:10 cars, buggies, truggies, trucks,..

9.76€  Inc Tax
TFL Racing Quick Change Tool Kit / 8 in 1 (TT1604-03BK)
TFL Racing Quick Change Tool Kit / 8 in 1

Package:
Driver / 1- / 0+ / 4.0 / 5.5 / 1.5 / 2.0 / 2.5 / 3.0mm

Use this tool for radio controlled (RC) airplanes, helicopters, onroad and offroad cars, buggies, trucks, crawlers and other models

20.74€  Inc Tax
TFL Racing Quick Change Hex Wrench Set 1.5/2.0/2.5/3.0mm (TT1604-07BK)
TFL Racing Quick Change Hex Wrench Set 1.5/2.0/2.5/3.0mm

Tool for 1:8 and 1:10 cars, buggies, truggies, trucks,..

19.52€  Inc Tax
Jamara Crimp Pliers L=170mm (AWG 28-14) (J-194003)
Jamara Crimp Pliers

Terminal Crimper for servo connector leads: AWG 28-14
Tool lenght: 170mm

Use this tool for radio controlled (RC) airplanes, helicopters, cars, trucks, buggies, boats and other models. For servo connection lead assembly.

19.52€  Inc Tax
C&Y Tube Bender (8KM8561)
C&Y Aluminum Tube Bender

Use for radio controlled (RC) airplanes, boats and other models.

7.93€  Inc Tax
C&Y Hinge Slotting Set (8KM8421)
C&Y Hinge Slotting Set

Use for radio controlled (RC) airplanes and other models.

5.49€  Inc Tax
Per Page      1 - 30 of 62