PowerBox Systems

Sort By:  
159.82€  Inc Tax
199.47€  Inc Tax
109.80€  Inc Tax
39.65€  Inc Tax
PowerBox SparkSwitch (6610)
PowerBox SparkSwitch

The SparkSwitch is a reliable, high-performance ignition switch. The overall design of the SparkSwitch is deliberately simple, but omits no important functions. The ignition switch is immediately ready for use as supplied, and needs no setting up. The only requirement is to set up the switch channel at the RC system transmitter.

Technical Data
Operating voltage: 4.0V - 9.0V
Current drain Power-on state: 19mA
Current drain Standby: 0.2μA
Maximum load current: max. 2A
Output voltage: 5.9V / 7.4V / 12.0V
Signal input: PWM
Dimensions: 56 x 19 x 16 mm
Weight: 22g incl. patchwire
Temperature range: -30°C to +75°C

Use for large aerobatic or scale (RC) radio controlled airplanes and other models.

49.41€  Inc Tax
PowerBox Crimping tool Professional (7100)
PowerBox Crimping tool Professional

Use this professional crimping tool for JR-style and BEC connectors

The integral ratchet makes the crimping procedure very simple and reliable.

Use this tool for crimping servo connectors on large aerobatic or scale (RC) radio controlled airplanes, helicopters, cars, trucks, buggies, boats and other models.

35.99€  Inc Tax
PowerBox BlueCom™ Adapter (9021)
PowerBox BlueCom™ Adapter

Use this BlueCom™ adapter for wireless set up of PowerBox products. Update to the latest software version and adjust parameters conveniently from your mobile phone.

Features
Wireless Bluetooth connection to the PowerBox device
Updates and set-up work carried out very simply using your mobile phone or tablet
Free App for Apple and Android devices
Automatic online update function


Use for large aerobatic or scale (RC) radio controlled airplanes and other models.

49.41€  Inc Tax
PowerBox Adapter leads SRXL2 (9192)
PowerBox Adapter leads SRXL2

For all systems supporting Spektrum SRXL2.

Set contents
2 piece set

Use for large aerobatic or scale (RC) radio controlled airplanes and other models.

8.54€  Inc Tax
PowerBox USB Interface Adapter (9020)
PowerBox USB Interface Adapter

Use this USB interface to update PowerBox products

Use for large aerobatic or scale (RC) radio controlled airplanes and other models.

29.89€  Inc Tax
Accessories kit for PowerBox Smokepump (8050)
Accessories kit for PowerBox Smokepump

Set contents
2x patchleads, Y-piece, heat-resistant, rubber hose

Use for large aerobatic or scale (RC) radio controlled airplanes and other models.

9.15€  Inc Tax
PowerBox Smokepump (8010)
PowerBox Smokepump

The PowerBox smoke pump has been developed by PowerBox-Systems specifically for pumping smoke oil in model aircraft.

Features
Durable metal-geared pump
Infinitely variable flow rate from 0-100%
No external cut-off valve required
High maximum flow rate
Can be operated directly from the receiver power supply
Stand-by cut-off when used with separate battery
Compact design
Low current drain
Mounting facility

Technical Data
Operating voltage: 4.0V - 9.0V
Current drain Power-on state: approx. 1.5 Ampere at 100%
Current drain Standby: 10µA
Max. flow rate: max. 750ml/min
Smoke medium: Smokeoil „blue Max“ or 3W Smokeoil
Dimensions: 79 x 31 mm
Weight: 125g
Temperature range: -30°C to +75°C


Use for large aerobatic or scale (RC) radio controlled airplanes and other models.

159.82€  Inc Tax
PowerBox DigiSwitch V2 (6430)
PowerBox DigiSwitch V2

The PowerBox DigiSwitch V2 is the second generation of the PowerBox Digi-Switch, which is well known throughout the world. For almost fifteen years the PowerBox DigiSwitch has represented the standard for small to medium-sized models thanks to its compact format and versatility.

Features
High-performance electronic switch
Ultra-light unit, compact format
Regulated output voltage
User-selectable output voltage: 6.0 V/7.0 V/7.6 V or non regulated
RGB LED voltage indicator for the battery
Telemetry support for CORE systems
Supports 4 different battery types: 2s LiPo, 2s LiIon, 2s LiFePo and 5s NiMH
Regulator monitoring
Suppression of servo feedback currents

Technical Data
Operating voltage: 4.0V - 9.0V
Power supply: 2s LiPo, 2s LiIon, 2s LiFePo, 5s NiMH
Current drain Power-on state: 23 mA
Current drain Standby: 4 μA
Maximum load current: max. 10 A
Drop-out voltage: 0.1 V
Output voltage: 6.0 V/ 7.0 V/7.6 V stabilized or non-regulated
Dimensions: 50 x 18 x 11 mm
Weight: 15 g
Temperature range: -30 °C to +75 °C


Use for large aerobatic or scale (RC) radio controlled airplanes and other models.

49.41€  Inc Tax
PowerBox Sensor V3 (6330)
PowerBox Sensor V3

The PowerBox Sensor V3 is the third generation of the PowerBox Sensor, which is well-known throughout the world. For almost twenty years the PowerBox Sensor has represented the standard for small to medium-sized models thanks to its compact format and versatility.

Features
High-performance battery backer
Ultra-light unit, compact format
Double regulated output voltage
Redundant switch and regulator circuitry
User-selectable output voltage: 6.0 V or 7.8 V
Separate RGB LED voltage indicators for each battery
Telemetry support for CORE systems
Supports 4 different battery types: 2s LiPo, 2s LiIon, 2s LiFePo and 5s NiMH
Regulator monitoring
Suppression of servo feedback currents

Technical Data
Operating voltage: 4.0 V - 9.0 V
Power supply: 2s LiPo, 2s LiIon, 2s LiFePo, 5s NiMh
Current drain Power-on state: 30 mA
Current drain Standby: 10 µA
Maximum load current: Peak 2x 10 A
Drop-out voltage: 0.25 V
Output voltage: 6.0 V/ 7.8 V regulated
Dimensions: 65 x 26 x 11 mm
Weight: 30 g
Temperature range: -30 °C bis +105 °C

Use for large aerobatic or scale (RC) radio controlled airplanes and other models.

99.43€  Inc Tax
PowerBox Teleconverter S-BUS 2 (5600)
PowerBox Teleconverter S-BUS 2

The PowerBox Teleconverter provides a means of connecting any PowerBox with a telemetry output to a Futaba S-BUS2 telemetry system.
All you have to do is register the Teleconverter at the transmitter, like a standard sensor.

Technical Data
Operating voltage: 4.0V - 9.0V
Current drain Power-on state: 18mA
Supported telemetry systems: S-BUS 2
Dimensions: 33 x 10 x 3 mm
Weight: 6g
Temperature range: -30°C to +75°C
EMV approval: EN 55014-1:2006 + A1:2009
CE approval: 2004/108/EG

Use for large aerobatic or scale (RC) radio controlled airplanes and other models.

29.89€  Inc Tax
PowerBox Competition SR2 (4450)
PowerBox Competition SR2

The PowerBox Competition SR2 offers outstanding functionality, and sets new standards in its class!

Features
22 channels
High-performance battery backer with high continuous load capacity
2.4” TFT screen, legible in sunlight
Bi-lingual menu system
Consistent duplication of all power electronics
Redundant electronic switch
Servo matching for all 22 outputs
Auto matching function
Two independent door sequencers with Setup Assistant
The latest integrated iGyro technology, using the iGyroSAT as gyro sensor
Twelve independent gyro outputs for: 4x aileron, 4x elevator, 4x rudder
Individual gain control for all twelve gyro outputs
Special regulatory algorithm for fixed-wing models
System detects all transmitter mixers
Four selectable output voltages: 6.0 V, 7.4 V, 7.8 V or unregulated
Graphic menu diagrams ensure ultra-simple programming
Fast basic setup procedure using the sophisticated Assistant
Optional GPS III for speed-dependent gyro compensation
Telemetry data for PowerBox P²BUS, Futaba S.BUS2, Jeti Ex-BUS, Spektrum SRXL2, Multiplex M-Link and Graupner HoTT
Transmission of battery, receiver and GPS* data
Virtually all features can be controlled from PowerBox and Jeti transmitters
Selectable servo frame rate: 10ms, 12ms, 14ms, 16ms, 18ms
Servo feedback current suppression
Latest 32-bit micro-processor for precise, high-speed signal processing
High-performance machined heat-sink for optimised heat diffusion
Machined, anodised aluminium switch and screen case
Compact dimensions

Technical Data
Operating voltage: 4.0V - 9.0V
Power supply: 2S LiPo, 2S LiIon, 2S LiFePo, 5S NiCd/NiMH
Current drain Power-on state: 260mA
Current drain Standby: 30µA
Maximum load current: 2x40A (<30s)
Drop-out voltage: 0.3V
Output voltage: 6.0V, 7.4V, 7.8V, unregulated
Signal input: serial
Supported RC systems: PowerBox, Futaba, Jeti, Spektrum, M-Link and Hott
Receiver redundancy: SRS
Channels: 26
Servo sockets: 22
Programmable servo outputs: 22
Servo signal resolution: 0,25µs
Signal frame rate: 10ms, 12ms, 14ms, 16ms, 18ms
Gyro sensor type: external iGyro SAT
Number of sensor axes: 12
Screen: TFT 320x240 pixels
Integral door sequencer: yes
Supported telemetry systems: P²BUS, S.BUS2, EX-Tele, SRXL2, M-Link, Hott
Dimensions: 107 x 69 x 19 mm
Weight: 115g
Weight Sensor Switch: 15g
Weight of LCD screen: 34g
Temperature range: -30°C to +105°C

Set contents
PowerBox Competition SR2
TFT Display
SensorSwitch
2 patch-leads
4 rubber grommets and brass spacer sleeves, factory-fitted
8 retaining screws
Manual

Use for large aerobatic or scale (RC) radio controlled airplanes and other models.

399.55€  Inc Tax
PowerBox Pioneer (4100)
PowerBox Pioneer

The PowerBox Pioneer is the latest development of a 14-channel power supply unit without voltage regulation, designed for HV servos. Since the unit has no voltage regulators, nor the large heat-sink surfaces required for them, it offers ultra-compact dimensions. Even so, the Pioneer still provides redundancy, as is the standard for all power supply units made by PowerBox-Systems. The output section and the switch controller are duplicated in order to guarantee maximum security.

Features
14 channels
High-performance battery backer with high continuous load capacity
Duplicated circuitry for the entire power electronics
Redundant electronic switch
All features can be controlled using PowerBox and Jeti transmitters
All systems can be operated using BlueCom or PowerBox USB
Integrated iGyro technology of the latest type, with iGyro SAT as gyro sensor
Nine independent gyro outputs for: 3x aileron, 3x elevator, 3x rudder
Special regulatory algorithm for fixed-wing models
Detects all transmitter mixers
Ultra-simple gyro programming in just a few minutes
Optional GPS mode for speed-dependent gyro compensation
Telemetry data for PowerBox P²BUS, Futaba S.BUS2, Jeti Ex-BUS and Spektrum SRXL2
Transmission of voltage, current, capacity, lost frames and holds
User-variable servo frame rate: 10 ms, 12 ms, 14 ms, 16 ms, 18 ms
Suppression of servo feedback currents
Ultra-modern 32-bit microprocessor ensures swift, accurate signal processing
Efficient heat dissipation via the high-quality machined and anodised aluminium case
Machined and anodised aluminium switch housing
Space-saving low-profile format
Ultra-lightweight construction

Technical Data
Operating voltage: 4.0 V - 9.0 V
Power supply: 2s LiPo, 2s Lilon, 2s LiFePo, 5s NiMH
Current drain Power-on state: 105 mA
Current drain Standby: 30 µA
Maximum load current: Continuous 2x10 A (<30 s 2x 20 A)
Drop-out voltage: 0.3 V
Output voltage: unregulated
Signal input: serial
Supported RC systems: PowerBox, Futaba, Jeti and Spektrum
Receiver redundancy: SRS
Channels: 26
Servo sockets: 14
Servo signal resolution: 0,5 µs
Signal frame rate: 10 ms, 12 ms, 14 ms, 16 ms, 18 ms
Gyro regulation: Heading- and Normalmode
Gyro sensor type: external iGyro SAT
Number of sensor axes: 9
Supported telemetry systems: P²BUS, S.BUS2, EX-Tele, SRXL2
Dimensions: 63 x 44 x 12 mm
Weight: 40 g
Weight Sensor Switch: 6 g
Temperature range: -30 °C to +75 °C

Set contents

PowerBox Pioneer + MicroSwitch
2 patch leads 22 cm
2 retaining screws
Adhesive tape
Manual

PowerBox Pioneer + MicroMag
Magnet
2 patch leads 22 cm
2 retaining screws
White adhesive tape
Sticker MagSensor
Key ring
Manual

Use for large aerobatic or scale (RC) radio controlled airplanes and other models.

199.47€  Inc Tax
PowerBox iGyro SAT (3610)
PowerBox iGyro SAT

The iGyro SAT has been developed specifically to complement the new range of PowerBox PBR receivers by providing the modeller with a very simple means of adding an iGyro function to any PowerBox PBR receiver - Plug ‘n´Play. The iGyro SAT works as a sensor module, passing the data to the receiver via the FastTrack bus, which has been specially developed for the purpose.

Features
Extremely accurate triple-axis MEMS sensor
Special regulatory algorithm designed for fixed-wing model aircraft
Outputs the new FastTrack serial bus
Plug and play with all PowerBox receivers
Installed orientation can be selected
16-bit processor for fast, high-resolution signal processing
Robust aluminium case

Technical Data
Operating voltage: 4.0V - 9.0V
Current drain Power-on state: 20mA
Maximum load current: 20A
Signal input: FastTrack Bus
Servo sockets: 5
Servo signal resolution: 0,5µs
Gyro regulation: Heading- and Normalmode
Gyro sensor type: MEMS
Number of sensor axes: 3
Dimensions: 20 x 20 x 8 mm
Weight: 7g
Temperature range: -30°C to +85°C

Use for large aerobatic or scale (RC) radio controlled airplanes and other models.

99.43€  Inc Tax
PowerBox MicroSwitch (3584)
PowerBox MicroSwitch

Use for PowerBox Pioneer

Use for large aerobatic or scale (RC) radio controlled airplanes and other models.

29.89€  Inc Tax
PowerBox GPS III (3525)
PowerBox GPS III

The new GPS III is the result of a continuing programme of development of the GPS II, which has now been on the market for a good eight years. The software has been completely restructured, enabling us to improve the unit’s performance significantly. Amongst other new features, measured values are now transferred with greater precision.

The GPS III automatically detects the make of radio control system or PowerBox/iGyro to which it is connected, and sets up correct communication completely automatically.

Futaba users can select different slots using PowerBox Terminal. For HoTT and Multiplex systems it is possible to set up various alarms for altitude or distance.

Features
Latest generation of GPS
Helix antenna for reception regardless of flight attitude
Reception even under difficult conditions
Fast response to speed changes
Automatic system detection
LED status indicator
Accurate 3D speed
Height measurement (altimeter)
Distance, optionally as 2D or 3D value
Distance covered
Geo-coordinates
Number of satellites, measurement accuracy
Supports the following telemetry systems:

PowerBox CORE P²BUS
iGyro/Royal SRS/Mercury
Futaba S.BUS2
Multiplex M-Link
Jeti EX-BUS
Graupner HoTT

Technical Data
Operating voltage: 4.0 V - 9.0 V
Current drain Power-on state: max. 60 mA
Supported RC systems: Royal, Mercury, iGyro 3xtra, iGyrio SRS
Dimensions: 58 x 18 x 17 mm
Weight: 14 g
Temperature range: -30 °C to +75 °C

Use for large aerobatic or scale (RC) radio controlled airplanes and other models.

109.80€  Inc Tax
PowerBox Softshell Jacket (7250)
PowerBox Softshell Jacket

Great softshell jacket which fits best at the flying site. Enjoy this chic softshell jacket with great functions.

Features
wind-resistant
waterproof
active breathing
bi-elatic
warming

Comfortable fit
High closing collar
High quality softshell material
Breathing active, waterproof and wind resistant
2 pockets on the side and one on the breast with zipper
Logo embroidery on breast and back
Adjustable sleeve-endings with velcro fastener
fast drying Soft fleece inside

Use for large aerobatic or scale (RC) radio controlled airplanes and other models.

49.41€  Inc Tax
PowerBox Adapter lead MPX/Deans (1236/10)
PowerBox Adapter lead MPX/Deans

Connectors:
MPX female / Deans male, 10cm

Features
Heavy-duty insulation of soldered joints
Excellent long-term functional properties
Soldered joints immune from oxidation
Vibration protection
Kink protection
Resistant to chemical influences
Temperature-resistant from -30°C to +90°C

Use for large aerobatic or scale (RC) radio controlled airplanes and other models.

9.76€  Inc Tax
PowerBox Adapter lead MPX/XT60 (1277/10)
PowerBox Adapter lead MPX/XT60

Connectors:
MPX female / XT60, 10cm

Features
Heavy-duty insulation of soldered joints
Excellent long-term functional properties
Soldered joints immune from oxidation
Vibration protection
Kink protection
Resistant to chemical influences
Temperature-resistant from -30°C to +90°C

Use for large aerobatic or scale (RC) radio controlled airplanes and other models.

9.76€  Inc Tax
PowerBox SensorSwitch NG, black connector (3570)
PowerBox SensorSwitch NG, black connector

Use this switch with 40cm ribbon cable length for:

Champion SRS
Royal SRS
Competition SR2
Mercury SRS
Source

Use for large aerobatic or scale (RC) radio controlled airplanes and other models.

29.89€  Inc Tax
PowerBox SensorSwitch NG, red connector (3572)
PowerBox SensorSwitch NG, red connector

Use this switch with custom cable length for:

Evolution
Professional
Competition


Use for large aerobatic or scale (RC) radio controlled airplanes and other models.

29.89€  Inc Tax
PowerBox MagSensor (9040)
PowerBox MagSensor

The MagSensor represents an alternative method of operating and switching our PowerBox battery backers.

Technical Data
Current drain Power-on state: 10mA
Current drain Standby: 20µA
Weight: 10g
Temperature range: -30°C to +75°C

Use for large aerobatic or scale (RC) radio controlled airplanes and other models.

34.77€  Inc Tax
PowerBox MicroMag (3585)
PowerBox MicroMag

This switch can be installed visible or hidden and switched on with the included magnet.

Use for large aerobatic or scale (RC) radio controlled airplanes and other models.

39.65€  Inc Tax
PowerBox Source OLED-Display (4766)
PowerBox Source OLED-Display

OLED-Display for PowerBox Source

Use for large aerobatic or scale (RC) radio controlled airplanes and other models.

29.89€  Inc Tax
PowerBox OLED-Display (4765)
PowerBox OLED-Display

OLED-Display for PowerBox Mercury SRS

Use for large aerobatic or scale (RC) radio controlled airplanes and other models.

59.78€  Inc Tax
PowerBox LC-Display (4771)
PowerBox LC-Display

LC-Display for PowerBox Royal SRS and Champion SRS

Use for large aerobatic or scale (RC) radio controlled airplanes and other models.

69.54€  Inc Tax
PowerBox Extension for LC-Display (4775)
PowerBox Extension for LC-Display

Use this extension cable for:
Royal SRS
Champion SRS

Set contents
50cm ribbon cable

Use for large aerobatic or scale (RC) radio controlled airplanes and other models.

29.89€  Inc Tax
PowerBox Extension for SensorSwitch (3552)
PowerBox Extension for SensorSwitch

Use this extension cable for SensorSwitch for:
Royal SRS
Champion SRS
Mercury
Competition SR2
Source

Use for large aerobatic or scale (RC) radio controlled airplanes and other models.

18.91€  Inc Tax
Extension for PowerBox Pioneer Switch (3580)
Extension for PowerBox Pioneer Switch

Use this extension cable for PowerBox Pioneer Switch
Length: 40 cm

Use for large aerobatic or scale (RC) radio controlled airplanes and other models.

18.91€  Inc Tax
PowerBox SparkSwitch PRO (6615)
PowerBox SparkSwitch PRO

The SparkSwitch PRO is a reliable, high-performance ignition switch with telemetry function.

Features
Ignition cannot cause interference
Galvanic separation between ignition and receiver
Immune to static discharge from ignition
Regulated or unregulated output voltage
Suitable for 6.0 V, 7.4 V and even 12 V ignition systems
Monitoring of the ignition battery via telemetry
Rotational speed (rpm) and engine temperature
Two different switch modes
Compact design
Temperature sensor included
Can be updated via BlueCom or USB Interface

Technical Data
Operating voltage: 4.0V - 9.0V
Current drain Power-on state: 30mA
Current drain Standby: 60μA
Maximum load current: max. 2A
Output voltage: 5.9V / open
Signal input: PWM, P²BUS, S.BUS2
Supported telemetry systems: PowerBox, Jeti, Futaba, Graupner, Multiplex, JR
Dimensions: 60 x 24 x 14 mm
Weight: 16g
Temperature range: -30°C to +75°C

Use for large aerobatic or scale (RC) radio controlled airplanes and other models.

99.43€  Inc Tax
PowerBox iGyro™ 3xtra (3620)
PowerBox iGyro™ 3xtra

The iGyro 3xtra starts the second generation of the iGyro family. The new iGyro 3xtra boasts a completely revised regulatory algorithm and set-up procedure, expanded features and enormously enhanced performance, making it the new “State of the Art”.

Features
Extremely accurate triple-axis MEMS sensor
New regulatory algorithm for fixed-wing model aircraft with improved performance
Optional GPS-controlled speed compensation
Freely selectable orientation in the model
Automatic detection of orientation in the model
Ultra-simple set-up procedure
Adjustment of gain on individual axes without additional devices
Delta and V-tail mixers accurately detected, including differential travels
Exact separation of control inputs when mixed inputs are in use
Flap mixer can be superimposed without affecting gyro performance
Gain adjustment at the transmitter
Selectable Attitude Assist function for precise gyro regulation
Two ranges selectable from the transmitter for different gyro functions
Selectable five-stage gyro characteristics
User-variable stick priority
User-variable lock-in feel
Input and output with PWM signals
Fine-tuning via USB or BlueCom and mobile telephone
Can be updated using the PowerBox USB interface adapter
Robust aluminium case

Technical Data
Operating voltage: 4.0V - 9.0V
Current drain Power-on state: 40mA
Maximum load current: 20A
Signal input: PWM
Servo sockets: 5
Servo signal resolution: 0,5µs
Gyro regulation: Heading- and Normalmode
Gyro sensor type: MEMS
Number of sensor axes: 3
Dimensions: 43 x 30 x 15 mm
Weight: 36g, inkl. 6 patchleads
Temperature range: -30°C to +75°C

Use for large aerobatic or scale (RC) radio controlled airplanes and other models.

229.36€  Inc Tax
Per Page      1 - 30 of 44