Slovenščina Airplanes
Kyosho Calmato Alpha 40 SPORTS - Toughlon (Gas/Electric) RED (K.11257RB)
Ideal performer for low wing beginners to stunt training!
Designed for compatibility with both GP and EP flight!
Designed for compatibility with both GP and EP flight!
When its time to graduate from a beginner trainer, the next step could be this stylish low wing sports plane. The option of either EP or GP in the CALMATO ALPHA 40 Sports allows you to choose your preferred power source. Both embody the definitive stability of the CALMATO series with optimal maneuverability allowing low wing airplane beginners to fly stunts like loops and rolls. In addition, this kit is factory assembled and expertly pre-covered in quality film with printed coloring and Kyosho’s comprehensive design and construction ensures no gluing is required. The main wing halves are joined with an aluminum pin and can be separated for compact and easy transport. Motor mount, engine mount, tires, spinner and linkage parts are all included. Only a few separate items are needed to get airborne so it’s easy to enjoy the sporty flight performance of this conveniently priced low wing airplane.
Technical Data:
Required for operation:
Technical Data:
■Length : 1,300mm
■Width: 1,600mm
■Weight : (EP) 2,650g (GP) 2,550g
■Motor(EP): 600-1000W class backplate mounted outrunner brushless (sold separately)
■Engine (GP): 2-cycle 40-46 class (sold separately)
■Battery (EP): 14.8V 4,000-5,000mAh Li-Po (sold separately)
■Wing Area: 44dm2
■Wing Load : 57.9-62.0g/dm2
■Wing Type : Original semi-symmetrical
■Propeller : D11xP7-D12xP8 (sold separately)
Required for operation:
- ●4ch, 4servo+ESC(EP) or 5 servo(GP) RC system for airplane
●600-1000W backplate mounted outrunner brushless motor(EP)
●2 cycle 40-46 engine(GP)
●D11xP7-D12xP8 propeller(EP/GP)
●100mm Y extension cord x 1 or aileron(EP/GP)
●200mm extension cord x 2 for aileron
(EP/GP)
●14.8V 4,000-5,000ｍAh Li-Po battery (Max Dimension: L150xW48xH58mm)(EP)
●Battery charger with Li-PO balance charging feature(EP)
●Fuel, engine starting tool(GP)
●Battery for receiver(EP/GP)
: If the battery cannot use the ESC BEC power, a separate Rx battery unit is required.(EP)
Flite Test Mighty Mini Corsair 609mm Foam Kit (FT4109)
Flite Test Mighty Mini Corsair
Now made with the new Maker Foam the Flite Test Mighty Mini Corsair is an even better plane to get your hands on! The plane is one you have to see for yourself to believe and we couldn't be happier with it!
This little Warbird park flyer is the perfect size to always keep with you in the back seat of your car and is small enough to fly at most medium sized parks. Though this little Corsair doesn't have the 2,000 HP Pratt & Whitney R-2800 radial engine that the original full-scale warbird had, it does use a 2204 sized brushless motor that is commonly found on mini race quads. This gives this little 4 channel plane enough power to climb vertically endlessly and pull off most basic aerobatic maneuvers with ease.
Power Pack Compatibility:
Flite Test Airplanes are all designed around the use of various "Power Packs" which include an inexpensive Motor, ESC, Servo, & accessory package to complete each aircraft! The compatible power pack is listed below.
Power Pack A - Great lower power option for easier control.
Power Pack F - Improved output power for faster speeds and advanced flyers.
Maker Foam Features:
White color is much easier to add a simple trim scheme using stickers or pinstripes
Translucent allowing models to be creatively lit from within
Takes paint or decals extremely well
More durable than previous Flite Test foam products
Specifications:
Weight: 155g (fully assembled; without battery)
Wingspan: 609mm
Center of Gravity: 25mm from leading edge of wing (recommended)
Control Surface Throws: 12 degrees
Expo Suggestions: 30%
Now made with the new Maker Foam the Flite Test Mighty Mini Corsair is an even better plane to get your hands on! The plane is one you have to see for yourself to believe and we couldn't be happier with it!
This little Warbird park flyer is the perfect size to always keep with you in the back seat of your car and is small enough to fly at most medium sized parks. Though this little Corsair doesn't have the 2,000 HP Pratt & Whitney R-2800 radial engine that the original full-scale warbird had, it does use a 2204 sized brushless motor that is commonly found on mini race quads. This gives this little 4 channel plane enough power to climb vertically endlessly and pull off most basic aerobatic maneuvers with ease.
Power Pack Compatibility:
Flite Test Airplanes are all designed around the use of various "Power Packs" which include an inexpensive Motor, ESC, Servo, & accessory package to complete each aircraft! The compatible power pack is listed below.
Power Pack A - Great lower power option for easier control.
Power Pack F - Improved output power for faster speeds and advanced flyers.
Maker Foam Features:
White color is much easier to add a simple trim scheme using stickers or pinstripes
Translucent allowing models to be creatively lit from within
Takes paint or decals extremely well
More durable than previous Flite Test foam products
Specifications:
Weight: 155g (fully assembled; without battery)
Wingspan: 609mm
Center of Gravity: 25mm from leading edge of wing (recommended)
Control Surface Throws: 12 degrees
Expo Suggestions: 30%
Pilot-RC Laser 73" (1850mm) - white/red/black (4ST1973L-WB)
Pilot-RC Laser - radio controlled 3D airplane model (white, red and black paint scheme)
It has arrived! The 30cc version of Pilot-RC rule changing Laser 73" (1850mm)!
Fully designed from the ground up for out and out performance, keeping in line with current demand for faster, more aggressive and more agile models, while still keeping the well known great flying characteristics of Pilot-RC models.
Check the videos in our Video tab to see this model in action to fully understand its capability. Its not a question if the plane is quick enough, its whether you can keep up with it!
Specification:
Model: Laser
Wingspan: 1.850mm (73″)
Length: 1.760mm
Weight: 5.2kg
Features:
NEW! Hybrid construction from wood and composite materials for specially reinforced fuselage and wings.
NEW! Patented quick assembly system for wings.
NEW! Patented quick assembly system for canopy. Especially useful for electric version, fast battery change!
Genuine German Oracover (Ultracote) covering
Highly prefabricated, experienced builders can have it air ready in under a day
Pre-installed hinges (glued and pinned)
Easy canister installation due to open construction
Removable wings
Laser engraved motor mounting position
Pull-Pull system for Rudder servo
Cowl fits both gasoline and electric motors
Can use single elevator servo, or choose to split the elevator half and use two separate servos.
Designed for both single cylinder and twin cylinder engines!
Included hardware:
Complete air frame with all basic accessories (such as carbon fibre main undercarriage, tail-gear assembly and wing-tubes as well as fiberglass control horns and wheel pants)
Pre-installed hinges and pre-mounted canopy
Fuel tank and fuel tubing pre-installed, fuel dot and breather valve
Wheels, axels and wheel pants
Pre-prepared pull-pull wires and pushrods with ball links
Matching carbon spinner
Required hardware:
Motor: 30-40cc or equivalent electric (Recomended O.S. Engines Gasoline Engine GT33)
Servos: 4 or 5 high torque (minimum 20kg) plus throttle servo
(uses x1 per aileron, x1 or x2 (optional) for the elevator and x1 on rudder)
Also requires all the usual accessories such as transmitter, receiver, propeller, batteries, extension leads and possibly other small accessories.
It has arrived! The 30cc version of Pilot-RC rule changing Laser 73" (1850mm)!
Fully designed from the ground up for out and out performance, keeping in line with current demand for faster, more aggressive and more agile models, while still keeping the well known great flying characteristics of Pilot-RC models.
Check the videos in our Video tab to see this model in action to fully understand its capability. Its not a question if the plane is quick enough, its whether you can keep up with it!
Specification:
Model: Laser
Wingspan: 1.850mm (73″)
Length: 1.760mm
Weight: 5.2kg
Features:
NEW! Hybrid construction from wood and composite materials for specially reinforced fuselage and wings.
NEW! Patented quick assembly system for wings.
NEW! Patented quick assembly system for canopy. Especially useful for electric version, fast battery change!
Genuine German Oracover (Ultracote) covering
Highly prefabricated, experienced builders can have it air ready in under a day
Pre-installed hinges (glued and pinned)
Easy canister installation due to open construction
Removable wings
Laser engraved motor mounting position
Pull-Pull system for Rudder servo
Cowl fits both gasoline and electric motors
Can use single elevator servo, or choose to split the elevator half and use two separate servos.
Designed for both single cylinder and twin cylinder engines!
Included hardware:
Complete air frame with all basic accessories (such as carbon fibre main undercarriage, tail-gear assembly and wing-tubes as well as fiberglass control horns and wheel pants)
Pre-installed hinges and pre-mounted canopy
Fuel tank and fuel tubing pre-installed, fuel dot and breather valve
Wheels, axels and wheel pants
Pre-prepared pull-pull wires and pushrods with ball links
Matching carbon spinner
Required hardware:
Motor: 30-40cc or equivalent electric (Recomended O.S. Engines Gasoline Engine GT33)
Servos: 4 or 5 high torque (minimum 20kg) plus throttle servo
(uses x1 per aileron, x1 or x2 (optional) for the elevator and x1 on rudder)
Also requires all the usual accessories such as transmitter, receiver, propeller, batteries, extension leads and possibly other small accessories.
Graupner Ski Set (for Husky 1800S) (13410.43)
Graupner Ski Set for Husky 1800S
Can be used on a similar sized radio controlled model airplanes with approx. 1800mm wingspan.
Length: 330mm
Width: 65mm
Height: 40mm
Weight: 330g
(only ski set, RC model airplane not included)
Can be used on a similar sized radio controlled model airplanes with approx. 1800mm wingspan.
Length: 330mm
Width: 65mm
Height: 40mm
Weight: 330g
(only ski set, RC model airplane not included)
Graupner Su-26 HoTT RC Electro Airplane Model - 410mm (9905.HOTT)
Graupner Su-26 HoTT Radio Controlled (RC) Electro Airplane Model
New Graupner semi-scale model Su-26 HoTT. Equipped with a high-quality GRAUPNER/SJ GR-12S HoTT receiver.
Although the model is very lightweight, it can be operated outdoors. It is very easy to fly.
Features
Equipped with high-quality Graupner GR-12S HoTT receiver
Ready to fly once taken out of the package
Removable main landing gear and tailwheel equipped with soft rubber wheels
Package with charging station and 1S LiPo battery 3.7 V 150 mAh (included)
4 (AA) Mignon dry cell batteries included for the charging station (included)
Detailed operating instructions
Specification
Weight: 45 g
Length: 360 mm
Wingspan: 410 mm
New Graupner semi-scale model Su-26 HoTT. Equipped with a high-quality GRAUPNER/SJ GR-12S HoTT receiver.
Although the model is very lightweight, it can be operated outdoors. It is very easy to fly.
Features
Equipped with high-quality Graupner GR-12S HoTT receiver
Ready to fly once taken out of the package
Removable main landing gear and tailwheel equipped with soft rubber wheels
Package with charging station and 1S LiPo battery 3.7 V 150 mAh (included)
4 (AA) Mignon dry cell batteries included for the charging station (included)
Detailed operating instructions
Specification
Weight: 45 g
Length: 360 mm
Wingspan: 410 mm
- 1