Toys & Gift Items

Sort By:  
FMS Kingfisher 1400mm (with wheels, floats, skis and flaps) ARF (4ST18084-A)
Overview

Following the successful debut of Super EZ V2, FMS is thrilled to announce the release of a brand new multi-role trainer --- The FMS 1400mm Kingfisher! With simple assembly, ease of control and stability in performance, the Kingfisher is perfect for beginners. With the beginner pilot in mind, FMS’s Kingfisher is the ultimate user-friendly plane!  Assembly is easy with a super convenient bolt-type structure used on the wings, stabilizers, battery cover, and supporting struts. Minimal usage of screws ensure that the beginner pilot completes assembly quickly and safely. Less assembly time = more flying time! With three sets of landing gears included, the Kingfisher can handle any landing environment!

Oversize wheel set for grass fields and gravel roads, float set for water landings and skis for snow and ice landings. The Kingfisher is easily upgradable with optional electric towing hook for banners and gliders. FPV equipment bay ready! DO NOT miss this revolutionary multipurpose trainer. The Kingfish is ONE plane with endless potential! Enjoy the flight!
 
Key Features:
• High quality Predator 40A ESC, 3536-KV850 motor, recommended 11.1V 2200mAh 35C battery
• Three sets of landing gear, with oversize wheels, floats, skis for any landing environment.
• FPV and Towing capable!
• Bolt-together construction! Easy to build!
• 10-15 mins fly time (based on a fully-charged recommended battery)
• Strong Durable EPO material
• The finest multi-role trainer in the market

199.47€  Inc Tax
RadioLink T8FB Remote Controller (FHSS) with R8EF 8ch receiver (1RL0030)
RadioLink T8FB Remote Controller (FHSS) with R8EF 8ch receiver

Features:
Custom designed firmware for helicopter, fixed wing airplane, glider, multi-copter and other radio controlled models.
Online upgrades available through the simulator port and special Radiolink upgrade cable (no need for drivers and compatible with all OS).
T8FB simplifies the operation and makes it intuitevly easy to use even without reading detailed instruction manual.
Follows the technology of wireless spread spectrum for better control.
S-BUS, PPM and PWM signal output at the same time

T8FB Specification:
Size: T8FB - 173x102x206mm
Weight: 0.47kg
Frequency: 2.4GHz ISM band(2400MHz~2483.5MHz)
Modulation mode: GFSK
Channel bandwidth: 400KHz
Band width:1200KHz
Spread spectrum: FHSS
Adjacent channel rejection: >36dBM
PWM output: 1.0ms~2.0ms
Cycle:15 ms/per frame
Radio T8FB operating voltage: 4.8V~18V
Radio T8FB operating current: <110mA
Control distance: more than 1000 meters in the air (the actual control distance depends on the flying environment)

R8EF Receiver:
Channel: 8ch
Operating voltage: 4.8-10V
Operating current: 19-25mA (input voltage 5V)
Size: 48.5x21x11mm
Weight: 7g
Section precision: 4096
Signal output: S-BUS, PPM and PWM
Signal mode: Green LED, output 8 channel PWM signal
SBUS/PPM signal mode: Both red and green LED on, CH1 output S-BUS signal, CH2 output PPM signal, CH3 to CH8 output PWM signal (at the same time)

Package Including:
1x T8FB 2.4G 8CH Remote Control System Transmitter
1x R8EF Receiver

59.78€  Inc Tax
Syma X27 Ladybug RTF Drone (yellow) (SY27)
Syma X27 Ladybug Radio Controlled Drone

Features:
2.4G transmitter, high interference resistance ability, rapid response, high control accuracy, 2 speed.
Built-in barometer with altitude hold function provides stable flight.
Auto hover and One key takeoff / landing greatly simplifies the operation.
With attractive headless mode, completely solving pilot loss-of-orientation problem.
3D flips with amazing agility provides a stunt aerial show.

Specification:
Battery: 3.7V 200mAh LiPo (included)
Transmitter Battery: 4x "AA" batteries (not included)
Charging time: About 60 minutes.
Flying time: About 7 minutes.
Controlling distance: 25 meters.
Box Size: 29x7.2x20cm
Drone Size: 10.3x10.3x2.6 cm
Frequency: 2.4GHz

WHAT'S IN THE BOX:
RC Drone
Remote Control (batteries not included)
Batery and Charger
Operating Instructions

26.84€  Inc Tax
Torro Radio Controlled Highspeed Mini TRUGGY RTR 2.4Ghz 1:40 (green) (TOR9208056)
Torro Radio Controlled Highspeed Mini TRUGGY RTR 2.4Ghz 1:40 (green)

Torro RC Mini Racing Truggy Car
High speed about 25 km/h with RC Remote Control and many functions.
Automatic and patented 5-speed transmission. Comes with 20 pylons for race events.

FEATURES:
R/C Mini Racing Stunt Truggy 1/40 (green)
Remote controler with 30-40m range
Rollover protection case for hot stunts!
Ground clearance 10mm
Wheelbase 53mm
Track width 42mm
Up/down / right/left
Trim function for forward/reverse
Turbo speed of up to 25 km/h
6-10 minute drive (depending on the terrain and battery condition)
Vehicle Battery 3.7V 120 mAh LiPo
Charging time: about 40 minutes
Length: approx. 12cm
Height: approx. 5cm
Width: approx. 8.5cm
20 pylons
USB charging cable
Instruction manual

Remote control batteries required 6 x AA (not included)

Warnings:
Use under direct adult supervision only.
Minimum Age: 8 Years
Age recommendation: 14 Years
Not suitable for children under 36 months of age. Choking hazard due to small parts.

22.57€  Inc Tax
Graupner Impuls X 1:10 Electric 4WD Off-Road Buggy RTR (red/silver) (GR90818)
Graupner Impuls X 1:10 Electric 4WD Off-Road Buggy RTR (ready to run)

A great 1:10th scale off-road buggy for beginners

Impuls X offroad buggy will make everyone who likes the speed happy at the field. The model is powered by a DC motor (500 size) and powered by a standard LiPo set with the capacity of 2000mAh. All you need to do is insert the batteries in the transmitter and your all set for your first race.

Box content:
RC500 DC motor
4WD transmission
Water resistant electronic unit 2 in 1 (ESC/receiver)
PVC painted body
Differentials and ball bearings
Adjustable front and rear axle
Adjustable suspension
Forward/Stop/Reverse 2.4GHz radio control system
7.4V 2000mAh LiPo Battery
USB charger

89.67€  Inc Tax
99.43€
Syma S107H 3 Ch. Helicopter RTF (red) (SYS107HR)
Syma S107H 3-Ch. 2.4GHz Hoover Function Remote Control Helicopter

FEATURES:
Hover function
With the advanced barometric pressure sensor technology the helicopter hoovering function is greatly improved.

One key take off/landing
Helicopter can take off/land gradually by pressing only one button on the remote control.

Gyro stabilizer system
Gyroscope system constantly corrects for environmental factors during the flight, which makes it even easier and more stable to control.

Low-Voltage Protection
When the helicopter battery is low, the helicopter indicator lights will start flashing.

Crash Protection
When the helicopter is flying and the propellers collide with any objects or get jammed, it’s safety feature will be activated and stop the helicopter.

Speed modes button
Beginner and advanced mode

WHAT’ S IN THE BOX
• RC Helicopter
• Remote Control (batteries not included)
• Tail blade
• Operating instructions
• Screwdriver
• USB Charge cable

34.77€  Inc Tax
Graupner Impuls X 1:10 Electric 4WD Off-Road Buggy RTR (blue/silver) (GR90818.BU)
Graupner Impuls X 1:10 Electric 4WD Off-Road Buggy RTR (ready to run)

A great 1:10th scale off-road buggy for beginners

Impuls X offroad buggy will make everyone who likes the speed happy at the field. The model is powered by a DC motor (500 size) and powered by a standard LiPo set with the capacity of 2000mAh. All you need to do is insert the batteries in to the transmitter and your all set for your first race.

Box content:
RC500 DC motor
4WD transmission
Water resistant electronic unit 2 in 1 (ESC/receiver)
PVC painted body
Differentials and ball bearings
Adjustable front and rear axle
Adjustable suspension
Forward/Stop/Reverse 2.4GHz radio control system
7.4V 2000mAh LiPo Battery
USB charger

89.67€  Inc Tax
99.43€
Syma S5 SPEED 3 Ch. Helicopter RTF (white) (SYS5)
Syma S5 SPEED RTF (ready to fly) Helicopter 
3 CHANNEL REMOTE CONTROL HELICOPTER SERIES

GYRO System:
Gyroscope system can constantly adjust the aircraft Various spin phenomena in flight; helicopter is more stable in flight and easier to operate.

COLORFUL FLASHING LIGHTS:
Colorful flashing light, nice feature when flying at night.

DOUBLE PROTECTION:
Helicopter will power-off automatically when rotor is chocked.

WHAT'S IN THE BOX:
RC Helicopter
Remote Control (batteries not included)
Charger
Operating Instructions
Tail blade

26.84€  Inc Tax
Syma X22SW Real Time FPV 4-Ch. Remote Control Camera Drone (SY22W)
Syma X22SW FPV Real Time 4-Ch. Remote Control Camera Drone

FEATURES:
App control
With the unique App control function, you can expiernece the different type of remote control flying.

FPV live stream
FPV is the first person view, with the live stream of X22SW Drone. With Syma X22SW drone you will be impressed by the exact same scenery just by changing its angle of view.

Flight plan
Go to "Syma FLY" App, and enter the flight plan. Simply draw a route on the screen with your fingertip and Syma X22SW will then follow that direction automatically.

Auto hoovering
With the advanced barometric pressure sensor technology the drone hoovering function is greatly improved.

Flips
Syma X22SW can perform flying patterns such as ups & down, backward & forward flying, left & right and can perform even some flips, etc. Remarks: Some flying "tricks" can only be done in HIGH speed mode.

480P WiFi cam
Quadcopter equipped with 480P WiFi camera, let you control the aircraft while taking some pictures and flight videos.

Specification:
Item No.: X22SW
Battery: 3.7V 400mAh Li-poly(included)
Transmitter Battery: 4"AA" batteries (not included)
Charging time: About 90 minutes
Flying time: About 6 minutes and a half
Controlling distance: About 25 meters
Box Size: 35 X 6.5X20.5cm
Product Size: 16.6 X 17.6 X 3.7 cm
Frequency: 2.4G

WHAT’ S IN THE BOX
• Camera Drone
• Remote Control (batteries not included)
• Main Blades
• Operating instructions
• Mobile Phone Retaining Clip
• USB Charge cable
• Memory Card
• Battery


59.78€  Inc Tax
Graupner Gallop 1/18th Scale 4WD Electric Off-Road Buggy RTR (GR90816)
Graupner Gallop 1/18th Scale 4WD Electric Off-Road Buggy RTR (ready to run)

Would you like to make you a real professional at the field? Have a look at Graupner Gallop 1:18 RTR offroad buggy model. The model comes ready out of the box and thanks to the permanent all-wheel (4WD) drive offers to the driver enough traction on any surface type.

Get ready for a blast of performance with Gallop 1:18 offroad buggy radio controlled car model.

Box content:
RC380 DC electric motor
4WD drive, splash water resistant
Electronic control (ESC) and receiver in one unit
Stylish PVC body
Ball bearing differentials
Front and rear independent suspension
2.4GHz RC system
7.4V battery, 650 mAh LiIo (included)
USB charger

Specifications:
Width [mm]: 163
Height [mm]: 100
Length [mm]: 255
Weight [g]: approx. 500
Gear ratio: 1:7.69

59.78€  Inc Tax
Joysway Magic Cat V5 Micro Radio Controlled Speedboat Model (RTR / Readyset) 265mm (4ST308108)
Joysway Magic Cat V5 Micro Radio Controlled Speedboat Model RTR (ready to ride) 265mm

Specification:
Hull Length: 220 mm
Total Length: 265 mm
Width: 72 mm
Weight: 170g (RTR)
Hull Material: ABS Injection molding with colorful painting decal stickers

Box content:
Magic Cat V5 Speedboat 265mm
2.4GHz 2-Ch digital proportional radio control system (transmitter)
Powerful water cooled 180 motor
5A electronic speed controller
9g waterproof rudder servo
6.4V 320mAh LiFePO4 battery pack
USB charger & USB DC adapter
9V dry batter (for transmitter)
ABS display boat stand

Required for operation:
All included - RTR (ready to run)

54.90€  Inc Tax
BETA Brushless Glider 1400 (Mode 2, RTF) - T8FB RadioLink FHSS Transmitter (4ST1480-M2RL)
BETA 1400 (brushless motor) Mode 2 - RTF with RadioLink T8FB 2.4GHz FHSS Transmitter

Great beginner RC model with included transmitter!

Almost finished RC motor glider model. Made of almost indestructible extruded foam polypropylene (EPP).

Controls:
Rudder, Elevator and Ailerons

Specification:
Wingspan: 1420mm
Length: 940mm
Weight: 650-720g


Comes as complete RC Set.

159.21€  Inc Tax
Kyosho Blizzard 2.0 1:12 READY SET EP (K.34902B)

Mighty belt-tracked vehicle powers over sand, dirt and snow!
User-friendly Readyset with 2.4GHz R/C system also provides blade arm control!

Powered by two independent side-by-side motors, the transmission in the Blizzard 2.0 Readyset delivers awesome power and free control so you can enjoy dominance over any terrain like only a true belted vehicle can deliver. With a suspension system equipped on all wheels, the Blizzard clears every challenge in its path including rocky obstacles, steep hill climbs and gravel or sand that would trap a machine with normal tires. Twin 370 motors and twin ESCs deliver forward, reverse, left/right turning and pivot (turns on the spot) .
In addition, control of the blade arm with the transmitter adds another fascinating aspect to the Blizzard. For great fun in the sand or snow, the Blizzard can
match your outdoor lifestyle and go wherever you want to go.

Kit Contents 

  • Pre-assembled chassis with control linkages complete
  • Complete printed body
  • 2.4GHz Syncro KT-431S R/C system
  • KYOSHO SPEED HOUSE NiMH 2200 battery
  • USB charger (Super plug type)
  • Binding connector
  • Tool (1.5 mm hex wrench)

Required for operation 

  • 4 x AA sized alkaline batteries for transmitter

Technical data

  • Length : 365mm
  • Width : 320mm
  • Height : 220mm
  • Motor : 370 type x 2
  • ESC KA-1571 ESC unit (S plug) ×2
  • KYOSHO SPEED HOUSE NiMH 2200 battery
  • R/C System 2.4GHz 3-ch 1-servo
298.90€  Inc Tax
Kyosho Outlaw Rampage 1:10 EP 2WD Truck READY SET - BLUE (K.34361T2B)

Realistic 2WD truck delivers the optimal combination of style and performance for the perfect introduction to R/C trucking.

The OUTLAW RAMPAGE brings a new dimension to R/C cars; incorporating real truck components in a 2WD scale truck. With a new chassis designed from the ground up, the underbody features double wishbone suspension on the front with a link system suspension on the rear in combination with the long stroke of high volume aerating oil shocks to deliver a standard of performance worthy of a 2WD trophy truck. Heavy-duty drive system realizes high durability and reliability and is designed to handle high loads with its 32-pitch module counter gear and diff gear and slipper clutch to manage sudden load changes from jump landings etc. With a power center combination consisting of the newly developed ‘G15’ brushed motor and large capacity Vortex WP Brush ESC 45A, the dynamic performance of the OUTLAW RAMPAGE is matched by its stunning 1970-80’s trophy truck style with pre-cut and painted body with decals applied. Whether it’s the rough road or no road at all, the OUTLAW RAMPAGE puts the ultimate trucking experience in your hands.


●Add 4 x AA size batteries for the transmitter and charge the battery for the chassis and this factory assembled Readyset is set for action.
●Steering mechanism with slider system makes efficient use of narrow space and is easy to assemble/disassemble by connecting the ball link.
●Front bumper features 3-piece structure that protects the chassis from hard impact.
●All screws are hex type for easier maintenance.
●Newly developed 15-turn ‘G15’ brushed motor delivers high torque output characteristics.
●Pre-cut and painted body complete with decals applied recreates the image of ’70’s -’80’s trophy trucks.
●Optional LED light unit (for 2 light:No.97054-2、for 4 light:No.97054-4) can be easily installed.
●Includes 2.4GHz Syncro KT-231P+ transmitter. Features throttle endpoint and steering dual rate setting.
●Equipped with Vortex WP Brush 45A ESC that boasts a maximum continuous current of 45A.

 

■Length 555mm (with body)
■Width 262mm (with body)
■Height 231mm (with body)
■Wheelbase 335mm
■Tread (F/R) 204mm/204mm
■Tires (F/R interchangeable) φ108×38mm
■Gear Ratio 12.65 : 1
■Motor 15 turn 540 type (G15 motor)
■Weight 2,000g approx.

<Ready Set Contents>
●Pre-assembled chassis installed with R/C unit
●Factory finished body with coloring and printed
●Syncro KT-231P+ transmitter
●TEAM ORION VORTEX WP Brush 45A ESC
●G15 brushed motor
●7.2V-1800 Ni-MH battery
●AC Charger
●Hex wrench
●Cross wrench

 

Required for Operation
4 x AA-size batteries for transmitter

189.71€  Inc Tax
218.38€
Kyosho Drone Racer ZEPHYR Force Black READY SET (K.20572BK)

DRONE RACER ZEPHYR FORCE BLACK READYSET

Kyosho’s Drone Racer is fantastic.
A group of 3 former mischievous boys are now around forty years old and senior. They have grown into the men they once looked up to as children, full of work and home responsibilities. They work late; get caught up in the hustle of city life, and maintain otherwise normal healthy lifestyles. Fast forward to the dawn of the Saturday on which they will get together again for the first time in ages. Preparing their Drone Racers and loading the car with other equipment (course), and then GO!

Unlike existing drones that are difficult to control, the sensational DRONE RACER is controlled like an R/C car with a pistol-grip transmitter. Takeoff and auto-hover with one-touch control using ultrasonic sensors that remove the frustration of learning complicated flying techniques. Now you can experience the fun of drone flying at your own pace.


The DRONE RACER is equipped with advanced ultrasonic sensors, 
6-axis gyroscope (3-axis angle speed sensors, 3-axis acceleration sensors),
barometric pressure sensor and four fast response mini coreless motors. Speed switching function provides a choice between “Easy Mode” and “Active Mode” and
delivers direct intuitive flight control.

Altitude is automatically maintained with ultrasonic and barometric pressure sensors. Altitude setting of 35cm or 60cm can be selected with a switch on the R/C system and one-touch control is used for takeoff, hovering and landing. Some people may feel frustrated in learning drone flying techniques.Kyosho’s newly developed technology*(patent pending) removes these barriers so anyone can enjoy the fun of flying drones. *according to Kyosho research


H-type chassis with split upper and lower sections and left-right propellers connected on one propeller arm allow the propeller unit angle to be changed between: 0°, 10°, 20°. Use more stability (0°/ max speed : 30km/h) or more speed (20°/ max speed : 34.5km/h) as a racing weapon.

 

The DRONE RACER is not designed for high altitude performance, but for people to enjoy flying safely within their field of vision near the ground. A total safety system includes: removable propeller guards; “PROPELLER AUTO STOP SYSTEM” that activates in case you lose control of the throttle; “ANGLE EMERGENCY AUTO STOP SYSTEM” if the drone becomes inverted, and “RADIO CUT EMERGENCY AUTO STOP SYSTEM” in case the radio signal is lost. Weighing only 130g, the DRONE RACER is not subject to the Japanese aviation law so you can fly freely anywhere you like (except in restricted areas).*as at aviation laws 10th December 2015

 

DRONE RACER can connect to your (Windows) computer with the included USB cable to adjust flight settings. In addition, an optional cable can also be used to connect to an Android terminal with a USB host function to adjust settings.
Download the free (DRONE RACER SETTING MANAGER) to adjust to your favorite setting and turn up the volume of fun.

Readyset Contents:

  • Fuselage
  • 2.4GHz Transmitter KT-231P+
  • USB auto cut charger
  • Pinion gear replacement tool (combination binding stick)
  • 3.7V-1000mAh Li-Po battery
  • Arm holder (10°, 20°)
  • USB cable
  • Spare propeller (for one drone)
  • Quick start guide
  • Instruction manual


Required for Operation (Sold Separately):

  • 4 x AA size batteries for transmitter
  • Computer with USB port (for charging) or USB power charger (if output is more than 2A, full charge can be complete within one hour)

 

118.34€  Inc Tax
Kyosho Drone Racer G-ZERO Dynamic White READY SET (K.20571W)

DRONE RACER G-ZERO DYNAMIC WHITE READYSET

Kyosho’s Drone Racer is fantastic.
A group of 3 former mischievous boys are now around forty years old and senior. They have grown into the men they once looked up to as children, full of work and home responsibilities. They work late; get caught up in the hustle of city life, and maintain otherwise normal healthy lifestyles. Fast forward to the dawn of the Saturday on which they will get together again for the first time in ages. Preparing their Drone Racers and loading the car with other equipment (course), and then GO!

Unlike existing drones that are difficult to control, the sensational DRONE RACER is controlled like an R/C car with a pistol-grip transmitter. Takeoff and auto-hover with one-touch control using ultrasonic sensors that remove the frustration of learning complicated flying techniques. Now you can experience the fun of drone flying at your own pace.


The DRONE RACER is equipped with advanced ultrasonic sensors, 
6-axis gyroscope (3-axis angle speed sensors, 3-axis acceleration sensors),
barometric pressure sensor and four fast response mini coreless motors. Speed switching function provides a choice between “Easy Mode” and “Active Mode” and
delivers direct intuitive flight control.

Altitude is automatically maintained with ultrasonic and barometric pressure sensors. Altitude setting of 35cm or 60cm can be selected with a switch on the R/C system and one-touch control is used for takeoff, hovering and landing. Some people may feel frustrated in learning drone flying techniques.Kyosho’s newly developed technology*(patent pending) removes these barriers so anyone can enjoy the fun of flying drones. *according to Kyosho research


H-type chassis with split upper and lower sections and left-right propellers connected on one propeller arm allow the propeller unit angle to be changed between: 0°, 10°, 20°. Use more stability (0°/ max speed : 30km/h) or more speed (20°/ max speed : 34.5km/h) as a racing weapon.

 

The DRONE RACER is not designed for high altitude performance, but for people to enjoy flying safely within their field of vision near the ground. A total safety system includes: removable propeller guards; “PROPELLER AUTO STOP SYSTEM” that activates in case you lose control of the throttle; “ANGLE EMERGENCY AUTO STOP SYSTEM” if the drone becomes inverted, and “RADIO CUT EMERGENCY AUTO STOP SYSTEM” in case the radio signal is lost. Weighing only 130g, the DRONE RACER is not subject to the Japanese aviation law so you can fly freely anywhere you like (except in restricted areas).*as at aviation laws 10th December 2015

 

DRONE RACER can connect to your (Windows) computer with the included USB cable to adjust flight settings. In addition, an optional cable can also be used to connect to an Android terminal with a USB host function to adjust settings.
Download the free (DRONE RACER SETTING MANAGER) to adjust to your favorite setting and turn up the volume of fun.

Readyset Contents:

  • Fuselage
  • 2.4GHz Transmitter KT-231P+
  • USB auto cut charger
  • Pinion gear replacement tool (combination binding stick)
  • 3.7V-1000mAh Li-Po battery
  • Arm holder (10°, 20°)
  • USB cable
  • Spare propeller (for one drone)
  • Quick start guide
  • Instruction manual


Required for Operation (Sold Separately):

  • 4 x AA size batteries for transmitter
  • Computer with USB port (for charging) or USB power charger (if output is more than 2A, full charge can be complete within one hour)

 

118.34€  Inc Tax
Hobbyzone Sport Cub 2 0.6m SAFE RTF (HBZ44000)
Introduction
The HobbyZone® Sport Cub S 2 is based on one of the all-time most popular trainer aircraft ever designed for learning to fly radio controlled (RC) airplanes—the legendary Sport Cub S. It's ultra-micro size makes it the ideal choice for a smaller trainer model that can be flown in yards, parks, soccer fields, football fields and other suitable spaces where larger models can't typically be flown successfully by first-time pilots. Exclusive SAFE® (Sensor Assisted Flight Envelope) technology helps to prevent overcontrol, loss of orientation and crashes so nearly everyone can learn to fly successfully. Beginner, Intermediate and Experienced modes allow you to choose the level of stability and control you need, or are ready to try, at the flip of a switch.

Key Features
  • Updated version of one of the best-selling and most popular trainer models available for learning to fly radio controlled (RC) airplanes – the Sport Cub S
  • Equipped with exclusive SAFE® technology that helps prevent crashes and makes it easy to learn how to fly
  • Ultra-micro size to fly in small parks, at sports fields or even indoors over a basketball court
  • Optional float set (sold separately) for flying from water
  • 100% complete and ready to fly right out of the box – there's nothing extra to buy, provide or assemble

Needed to Complete
Nothing! Everything you need to fly and begin having fun is included!

In The Box
(1) HobbyZone® Sport Cub S 2
(1) Electric Motor (installed)
(2) Linear Servos (installed)
(1) Spektrum™ Receiver, ESC and (2) Servo Control Unit (installed)
(1) Spektrum™ Controller/Transmitter
(1) E-flite® 150mAh 1S 3.7V LiPo Battery
(1) E-flite® 1S USB LiPo Battery Charger
(4) AA Alkaline Batteries for the controller/transmitter
(1) Product Manual

Features
  • Updated version of one of the best-selling and most popular trainer models available for learning to fly radio controlled (RC) airplanes – the Sport Cub S
  • 100% complete and ready to fly right out of the box – there's nothing extra to buy, provide or assemble
  • Equipped with exclusive SAFE® technology that helps prevent crashes and makes it easy to learn how to fly
  • Beginner, Intermediate and Experienced flight modes you can easily change between at the flip of a switch
  • Panic Recovery mode activates at the push of a button to prevent loss of control and crashes
  • Ultra-micro size to fly in small parks, at sports fields or even indoors over a basketball court
  • Provides telemetry data to the controller/transmitter indicating flight battery voltage
  • Spektrum™ controller/transmitter with industry-leading DSMX® 2.4GHz technology
  • Full 4-channel control for everything from training to aerobatic flight capability
  • Capable of aerobatic maneuvers including loops, rolls and upside down (inverted) flight
  • LiPo battery and USB charger for long flight times and convenient recharging
  • Powerful electric motor for easy operation and excellent performance
  • Lightweight yet durable construction perfect for first-time pilots
  • Under the 250 gram weight limit
  • Full line of replacement/spare parts plus accessories available
  • Optional float set (sold separately) for flying from water
  • Practice flying this aircraft in the RealFlight® simulator

Overview
Welcome to the exciting world of RC (Radio Controlled) flight! If you've ever dreamed of taking to the skies, Horizon Hobby has you covered. We are committed to engineering aircraft that you can learn to fly with successfully even if you've never flown RC before. Every HobbyZone® aircraft we offer features industry-leading design and technology developed by experts to keep you in control and learning at your own pace so you can turn your dreams of flight into a reality!

The HobbyZone® Sport Cub S 2 makes learning to fly RC airplanes in more places and smaller spaces easier than ever! Based on one of the most popular trainer aircraft ever designed for learning to fly radio controlled (RC) airplanes—the legendary Sport Cub S —it's ultra-micro size makes it the ideal choice for a smaller trainer model that can be flown in large yards, small parks, soccer fields, football fields and other suitable spaces where larger models can't typically be flown successfully by first-time pilots. Install the optional float set (EFLUA1190, sold separately) and you can add large pools and small ponds to the list of places you can fly! Exclusive SAFE® (Sensor Assisted Flight Envelope) technology helps to prevent overcontrol, loss of orientation and crashes so nearly everyone can learn to fly successfully. Beginner, Intermediate and Experienced modes allow you to choose the level of stability and control you need, or are ready to try, at the flip of a switch. Plus you can instantly return to stable flight using Panic Recovery in any flight mode. This makes the Sport Cub S 2 a natural evolution of the trainer many pilots learned to fly with because it includes all of the same great features, while also adding new telemetry capabilities that send flight battery voltage to the transmitter to make the pilot better aware of approximately how much "power" remains.

And the fun doesn't stop after you learn how to fly! It's lightweight yet durable airframe is equipped with a powerful electric motor that delivers long flight times and provides plenty of speed and power to perform aerobatic maneuvers including loops, rolls and even inverted (upside down) flight. That means the Sport Cub S 2 is a model even experienced pilots will appreciate and enjoy flying – and can also use to teach others to fly. The Bind-N-Fly® Basic version is the perfect choice for those pilots because it allows them to use their favorite Spektrum™ transmitter along with batteries and chargers they may already own. And the Ready-To-Fly version is perfect for first-time pilots because it includes a Spektrum™ controller/transmitter equipped with industry-leading DSMX® 2.4GHz technology, AA batteries for the transmitter, plus a rechargeable LiPo flight battery and USB charger. That means there's nothing extra to buy or provide! Best of all both versions arrive 100% factory-assembled and ready to go right out of the box – no assembly required!

Ready-To-Fly Convenience
This Ready-To-Fly (RTF) version includes a controller/transmitter equipped with Spektrum™ DSMX® 2.4GHz technology and everything else you need to fly including AA batteries for the transmitter, a rechargeable lithium polymer battery for the airplane and a USB charger. That means there's nothing extra to buy or provide so you can fly! The included transmitter can also be used with other ultra-micro/UMX (Ultra Micro eXtreme) Bind-N-Fly® (BNF) RC aircraft.

Fully Assembled
The Sport Cub S 2 arrives 100% factory-assembled and ready to go right out of the box. That means you can be flying in just the time it takes to charge the battery!

Durable Design
Construction with advanced EPS material delivers a lightweight yet durable airframe. In the unfortunate event you damage any airframe parts or components and can't repair them, a full line of replacement/spare parts is readily available.

Optional Floats
Turn the Sport Cub S 2 into a float plane with the optional float set (sold separately). Installation takes just a few minutes and all the necessary hardware is included with the airplane and float set.

Learn to Fly Successfully with SAFE® Technology
If this is your first RC airplane, Horizon Hobby-exclusive SAFE (Sensor Assisted Flight Envelope) technology prevents over-control and crashing while also offering multiple flight modes to deliver more control and capabilities as your skills progress:

Beginner Mode
In this flight mode, the airplane has pitch and bank angle limits to prevent over-control that can result in a loss of orientation and crashes. When the control sticks are released, the airplane automatically returns to level flight on its own allowing you to relax and enjoy just 'steering' the airplane through the sky. This flight mode also makes it easier to take off and land.

Intermediate Mode
This flight mode allows more freedom in pitch and bank, but still prevents significant over-control and the airplane does not return to level flight on its own. This allows you to make tighter turns and to climb and descend faster as your skills advance. Also, Beginner Mode automatically activates and returns the airplane to level flight when it descends below approximately 30 feet above ground level and the control sticks are released.

Experienced Mode
In Experienced Mode there are no pitch or bank angle limits so you have complete control! You can even fly inverted (upside down) and perform aerobatic maneouvers including loops, rolls, stall turns and more. Panic Recovery can be activated by switching to Beginner Mode and releasing the control sticks.

Panic Recovery
If you lose control of the airplane in the Intermediate or Experienced flight modes, simply switch to Beginner Mode and release the control sticks. SAFE technology will automatically return the airplane to level flight.

Specifications
Charger: USB 1S LiPo charger included
Completion Level: Ready-To-Fly
Power Type: Electric
Landing Gear: Fixed main with steerable tail wheel
Material: Foam
Product Length: 414.5mm
Receiver: Included
Speed Control: Included
Technology: SAFE Technology

169.58€  Inc Tax
Hobbyzone Carbon Cub 2 1.3m SAFE RTF, Spektrum DXS remote (HBZ32000)
Key Features

  • The most capable, versatile and easiest to fly scale trainer based on the iconic Carbon Cub from CubCrafters
  • Equipped with exclusive SAFE® technology that helps prevent crashes and makes it easy to learn how to fly
  • Optional and easy to install Landing Assist Sensor (LAS) available for smoother landings
  • Capable of aerobatic maneuvers including loops, rolls and upside down (inverted) flight
  • 100% complete including a controller/transmitter, battery and charger so there's nothing extra to buy or provide

In The Box
(1) HobbyZone Carbon Cub S 2 Plane
(1) Brushless Outrunner Motor (installed)
(1) 30A Brushless ESC (installed)
(4) Servos (installed)
(1) Spektrum Flight Controller (installed)
(1) Spektrum 4650 Serial Receiver (installed)
(1) Spektrum DXS DSMX® 2.4GHz Transmitter (RTF version only)
(1) Spektrum 2200mAh 3S 11.1V Smart LiPo Battery (RTF version only)
(1) Spektrum S120 USB-C Smart Charger (RTF version only)
(1) Product Manual

Needed to Complete
Nothing! Everything you need to fly is included.

Introduction
Even if you've never flown a radio controlled (RC) aircraft before, the Carbon Cub S 2 is the most versatile, capable and easiest to fly scale RC airplane yet! Based on the Carbon Cub by CubCrafters, an upgraded and thoroughly modern iteration of the classic Super Cub, and equipped with Horizon Hobby's exclusive and innovative SAFE technology, this scale reproduction makes it possible for almost anyone to learn to fly successfully. And the addition of telemetry-capable and Smart components including an ESC, battery and charger (battery and charger sold separately for the BNF® Basic version), along with the option to add SAFE Plus® GPS-enabled technology and the Landing Assist Sensor (LAS), makes learning to fly even easier than ever before!

Features
  • The most capable, versatile and easiest to fly scale trainer based on the iconic Carbon Cub from CubCrafters
  • Equipped with exclusive SAFE® technology that helps prevent crashes and makes it easy to learn how to fly
  • Beginner, Intermediate and Experienced flight modes you can easily change between at the flip of a switch
  • Panic Recovery mode at the push of a button to prevent loss of control and crashes
  • Easily upgrade to SAFE Plus GPS-enabled technology to add AutoLand, Virtual Fence and Holding Pattern features
  • Optional and easy to install Landing Assist Sensor (LAS) available for smoother landings
  • 100% complete including a controller/transmitter, battery and charger so there's nothing extra to buy or provide
  • Spektrum DXS controller/transmitter with industry-leading DSMX® 2.4GHz technology for reliable control without interference
  • Spektrum 2200mAh 3S 11.1V Smart LiPo battery delivers long flight times up to 10-15+ minutes
  • Spektrum S120 Smart charger works with a variety of USB power sources
  • Factory-installed servos, Spektrum flight controller and serial receiver
  • Powerful and efficient brushless power system including a 30A telemetry-capable ESC
  • Capable of aerobatic maneuvers including loops, rolls and upside down (inverted) flight
  • Robust landing gear with oversized tires for operation from a variety of surfaces
  • Quick and easy assembly—no glue or special tools required
  • Durable EPO construction that's tough yet lightweight
  • Optional floats available for flying from water
  • Full line of replacement/spare parts available
  • Practice flying this aircraft in the RealFlight® RC flight simulator

Overview
Welcome to the exciting world of RC (Radio Controlled) flight! If you've ever dreamed of taking to the skies, Horizon Hobby has you covered. We are committed to engineering aircraft that you can learn to fly with successfully even if you've never flown RC before. Every HobbyZone® aircraft we offer features industry-leading design and technology developed by experts to keep you in control and learning at your own pace so you can turn your dreams of flight into a reality!

The HobbyZone® Carbon Cub S 2 is the easiest to fly, most capable and versatile scale trainer RC airplane yet! It's equipped with exclusive SAFE® (Sensor Assisted Flight Envelope) technology that helps to prevent overcontrol, loss of orientation and crashes so nearly everyone can learn to fly successfully. Beginner, Intermediate and Experienced modes allow you to choose the level of stability and control you need, or are ready to try, at the flip of a switch. And you can instantly return to steady flight using Panic Recovery with the push of a button in any flight mode. Oversized tires make it possible to take off and land on a variety of surfaces including thick grass, gravel paths, dirt trails and smooth pavement, or you can install the optional floats to fly from water—which adds to its unmatched versatility and capabilities.

The Carbon Cub S 2 is equipped with a 30-amp telemetry-capable ESC that provides a variety of real-time power system related telemetry data including motor RPM, current, battery voltage and more to compatible Spektrum™ AirWare™ equipped transmitters, and even approximate flight battery power remaining via multiple LEDs on the DXS transmitter included with the RTF version. The addition of exclusive Spektrum Smart components including a lithium polymer (LiPo) battery and charger make it more convenient to charge properly and safely (battery and charger sold separately for the BNF® Basic version). And you have the option to easily upgrade to SAFE Plus GPS-enabled technology that offers features such as AutoLand and Virtual Fence, along with the option to install the Landing Assist Sensor (LAS) that automatically "flares" for smoother landings, to make learning to fly—and to land safely—easier than ever!

The Ready-To-Fly (RTF) version includes everything needed to fly in one box, and is the perfect choice if you're a new RC pilot. From the Spektrum DXS 2.4GHz transmitter you can use with other Bind-N-Fly® (BNF) and BNF Basic aircraft after you learn to fly the Carbon Cub S 2, to the 3S 2200mAh Smart LiPo battery that delivers long flight times and the convenient S120 USB-C Smart charger that can be used with a variety of USB power sources, there's nothing extra you need to buy or provide! A BNF Basic version is also available for experienced pilots who want to use their favorite Spektrum transmitter along with batteries and chargers they may already own. And for both versions, the powerful and efficient brushless power system including a telemetry-capable ESC, plus the flight controller, receiver and servos, are all factory-installed in the durable EPO airframe that assembles quickly and easily without the need for glue or special tools.

Ready-To-Fly Convenience
This Ready-To-Fly (RTF) version includes a Spektrum DXS controller/transmitter equipped with industry-leading DSMX® 2.4GHz technology and everything else you need to fly including AA batteries for the transmitter, a Spektrum Smart rechargeable lithium polymer battery for the airplane and a Smart USB charger. That means there's nothing extra to buy or provide so you can fly! The included transmitter, battery and charger can also be used with other Bind-N-Fly® (BNF) Basic RC aircraft.

Spektrum Smart Battery and Charger
The RTF version includes a Spektrum 3S 2200mAh Smart LiPo battery and an S120 USB-C Smart charger that can be used with a variety of USB power sources. Simply connect the battery to the charger, and the exclusive Smart technology will determine and start charging at the best rate to properly and safely charge the battery automatically.

Durable Design
Construction with advanced EPO material delivers a lightweight yet durable airframe that's tough enough to handle everyday flying punishment without getting bent out of shape. And in the unfortunate event you damage any airframe parts or components and can't repair them, a full line of replacement parts is readily available.

Easy Assembly
The Carbon Cub S 2 arrives mostly factory-assembled with the power system, servos plus the flight controller and receiver installed. All you need to do is finish some quick and easy final assembly, without the use of glue or special tools, and you'll be ready to fly in less time than it takes to charge a battery!

Versatile Gear Options
Thick grass, gravel paths, dirt trails; you can fly from these and many other surfaces that are impossible for most models of this size to handle. The robust landing gear is equipped with oversized tires that soak up the bumps of rough surfaces and provide excellent prop clearance. The optional float set (sold separately) takes just a few minutes to install and all the necessary hardware is included with the aircraft and float set so you can fly from lakes and ponds.

Optional Flaps
Functional flaps are an option for improved slow speed handling and even shorter takeoffs and landings. This feature requires a 7+ channel computer transmitter plus a flap servo and a servo extension (sold separately).

Optional Landing Assist Sensor for Smoother Landings
The Spektrum Landing Assist Sensor (LAS) is easy to install and provides automatic "flare" control to help inexperienced pilots "grease" landings by minimizing or completely eliminating bouncing (works over many/most surfaces and provides optimum performance when flying over/landing in grass).

Learn to Fly Successfully with SAFE® Technology
If this is your first RC airplane, Horizon Hobby-exclusive SAFE (Sensor Assisted Flight Envelope) technology prevents over-control and crashing while also offering multiple flight modes to deliver more control and capabilities as your skills progress:

Panic Recovery
If you ever lose control of the airplane in the more advanced control modes simply switch to Beginner Mode and release the control sticks. SAFE® Plus technology will automatically return the airplane to level flight.

Beginner Mode
Pitch and bank angle limits prevent over-control that can result in a loss of orientation and crashes. When the control sticks are released the airplane returns to level flight on its own. Best of all takeoffs are as simple as giving full throttle and letting the airplane fly off the ground or by giving it a quick hand launch.

Intermediate Mode
More freedom in pitch and bank, but still prevents over-control and does not return to level flight on its own. This mode allows you to make tighter turns and to climb and descend faster as your skills advance. Beginner mode automatically activates and returns the airplane to level flight when the airplane descends below approximately 30 feet above ground level and the sticks are released.

Experienced Mode
No pitch or bank angle limits so you have complete control! You can even fly inverted (upside down) and perform aerobatic maneuvers including loops, rolls, stall turns and more. Panic Recovery Mode can be activated by switching to Beginner Mode and releasing the sticks.

Specifications
Approximate Assembly Time: No assembly required
Approximate Flight Time: 5-7 minutes
Band: 2.4GHz
Battery: Included
Battery Type: LiPo (3.7V per cell)
CG (Center of Gravity): 62 - 68mm back from the leading edge of the wing measured at the fuselage
Channels: 4
Charger: Included
Completion Level: Ready-To-Fly
Flaps: No
Landing Gear: Fixed landing gear with oversize front wheels
Minimum Required Radio: 4-channel included
Minimum Speed Control: 30A
Motor Size: 480, 960Kv
Motor Type: Brushless
Product Length: 864 mm
Propeller Size: 229 mm
Radio: Included
Receiver: Included
Recommended Motor Battery: 3S 2200mAh LiPo
Servos: Included
Speed Control: Included
Spinner Size: 41 mm
Transmitter Range: Full
Trim Scheme Colors: Yellow and gray
Wingspan: 51" (1295 mm)

339.77€  Inc Tax
Kyosho Mini-Z MB010 4WD 1/24 Inferno MP9 TKI3 (white/black) - Readyset (K.32091WBK)
Kyosho Mini-Z MB010 4WD 1/24 Inferno MP9 TKI3 Buggy

Real racing buggy performance sits on the palm of your hand.
The perfect first or even second Radio Controlled car!

Simply add eight AAA-size alkaline batteries to this Readyset and the MINI-Z Buggy brings the fun of R/C car action. The advanced compact design includes 4WD drive train with slipper clutch to protect the gear system, and 4-wheel independent double wishbone suspension with oil-filled shocks to deliver true racing buggy performance. Most critical components are protected within the high-rigidity dustproof chassis shell. 7-stage geared steering servo provides plenty of torque for precision steering response and combines with the control program to realize the MINI-Z’s signature linear handling and light feel. The circuit board also features manual left/right volume adjustment for the optional gyro unit (sold separately) that stabilizes straight line running and improves cornering control. Modeled on the popular Inferno MP9, the MINI-Z buggy body matches performance with style featuring a distinctive new printed color scheme complimented by black wheels for the sharpest looking machine on the track. The fully pre-assembled Readyset package makes it simple and enjoyable for anyone to experience advanced R/C buggy performance, whether it’s your first car or as fun-driving second car.

Kyosho Readyset includes the Syncro KT-531P transmitter operating on FHSS 2.4GHz

  • Readyset package allows model to be enjoyed straight after purchasing batteries.
  • Fully pre-assembled chassis with printed polycarbonate body.
  • Real racing performance will please buggy owners. Great for indoor practice.
  • Includes Syncro KT-531P transmitter. Allows various setting adjustments such as steering angle.
  • FHSS 2.4GHz R/C system removes the need to manage frequency bands.
  • Frequency crystals are not required and up to 40 cars can be run at the same time.
  • Optional gyro unit set (K.MZW431) can be installed. Gyro sensitivity can be manually adjusted on the chassis.
  • Most optional parts already released for MINI-Z Buggy can be installed.


219.60€  Inc Tax
Graupner Blaster XL 1/18th Scale 4WD Electric Off-Road Monster Truck RTR (GR90817)
Graupner Blaster XL 1/18th Scale 4WD Electric Off-Road Truck RTR (ready to run)

Would you like to make you a real professional at the field? Have a look at Graupner Blaster 1:18 Monster Truck RTR model. The model comes ready out of the box and thanks to the permanent all-wheel (4WD) drive offers to the driver enough traction on any surface.

Get ready for a blast of performance with Blaster 1:18 Monster Truck.

Box content:
RC380 DC electric motor
4WD drive, splash water resistant
Electronic control (ESC) and receiver in one unit
Stylish PVC body
Ball bearing differentials
Front and rear independent suspension
2.4GHz RC system
7.4V battery, 650 mAh LiIo (included)
USB charger

Specifications:
Width [mm]: 178
Height [mm]: 153
Length [mm]: 230
Weight [g]: approx. 500
Gear ratio: 1:7.69

59.78€  Inc Tax
BETA Brushless Glider 1400 ARF - (1420mm) (4ST1480-A)
BETA 1400 ARF (almost ready to fly with brushless motor)

Great beginner radio control model airplane!

Almost finished motor glider made of almost indestructible extruded foam polypropylene (EPP). Takes only few minutes to complete the kit. 

Controls:
Rudder, Elevator and Ailerons

Specification:
Wingspan: 1420mm
Length: 940mm
Weight: 650-720g

Box content:
1x Beta 1400 ARF
1x brushless motor with propeller
1x ECS (electronic speed controller)
4x servos

Required for assembly:
1x Flight battery (LiPo 3S 2200mAh)
1x Transmitter
1x Receiver
1x Battery charger

119.56€  Inc Tax
Kyosho Monster Tracker 2.0 1:10 READY SET - BLUE (K.34404T1B)

Make your R/C debut something to remember with this rough and ready monster truck
Only requires four AA-size batteries!
Nothing stands in the way of the Monster Tracker as it clears jumps and gaps in the road with ease, leaving everything behind in a trail of dust. The pickup truck body rides high and proud in true American style on tires that are big and wide, just like the country of its birth. Power over and through fields with this affordable monster truck that is built tough for carefree excitement. A one-touch hatch allows the chassis to be easily accessed for battery changes. The dust-proof radio box and diff gear case combine with break-resistant flexible resin material so in the rare event of a breakage, easy replacement and assembly provide beginners with peace of mind. Simply insert 4 x AA-size batteries (sold separately) in the transmitter and charge the battery for the chassis and this factory-assembled Readyset truck is ready to rumble. Start your R/C journey on the right track with the Monster Tracker!

●Factory assembled Readyset only requires charging the chassis battery and inclusion of four AA-size alkaline batteries (sold separately) for the transmitter.
●Includes new 2.4GHz Syncro KT-232P transmitter.
●Precision modules on differential gear realize high durability.
●Fixed length sus arms eliminate need for precision adjustment of alignment.
●Steering servo horn is equipped with servo saver to protect the servo from crash impact.
●Compatible with a wide range of optional parts for the Sand Master.


■Length 410mm
■Width 300mm
■Height 175mm
■Wheelbase 270mm
■Tread (F/R) 230mm/230mm
■Tires (F & R) φ110×70mm
■Gear Ratio 11.27:1
■Motor 22 turn 540 type
■Weight 1900g (approx.)

Readyset Contents
●Factory assembled chassis with built in R/C unit
●Factory finished body with decals applied
●Syncro KT–232P transmitter
●ESC installed (forward, brake, reverse)
●Cross Wrench
●7.2V-2200mAh Ni-MH battery
●USB Charger

Required for Operation
●4 x AA size batteries for transmitter

158.60€  Inc Tax
Kyosho Komatsu HD785-7 1:50 RC Dump Truck READY SET (K.66003HGA)

Upgraded IRC dump truck proudly looks and moves in ultra-realism to capture the solid essence of this heavy-duty machine!

Komatsu is recognized around the world for its heavy-duty construction machinery, and Kyosho is proud to recreate the KOMATSU HD785-7 first released in February 2010, in this high-grade version. The previous model featured standard FWD and REV movement, however this HG model introduces High and Low gears for even more realistic function in addition to standard steering control and UP-DOWN control of the vessel (loading platform). The special controller with steering and lever recreates the sense of power unique to dump truck driving characteristics. The pre-painted body is immaculately finished down to fine details, making it suitable even as a display model. Three infra-red channels (A, B, & C) allow up to 3 trucks to be operated at the same time. Simply purchase standard alkaline batteries for the chassis and the controller and you can enjoy driving this fully assembled model, complete with pre-painted body. Recreate your own construction site by working the dump truck together with the 1/50 scale KOMATSU PC1250-8 (HG) hydraulic excavator of the same IRC construction machinery series.


●Fully completed, just install batteries to drive and operate.
●Special infra-red ‘IRC’ control system with special controller manages operating functions like the real machine.
●3 channels for multifunction: 1 channel for forward/reverse, 1 channel for left/right turn and 1 channel for up/down control of vessel (loading platform).
●3 Infra-red channels (A, B & C) allow 3 trucks to operate at the same time.
●Also, as the hydraulic excavator operates on different channels, 3 excavators and 3 dump trucks (maximum 6 machines) can operate at the same time.
●Detailed finish includes driver figure in the control seat, reproduced with company uniform.
●1/50 scale size with length of 210mm can be enjoyed as a display model.
●Pre-painted realistic finish is of display model standard.

*About KOMATSU HD 785-7 Dump Truck
Weight 72,300kg, length 10,290mm, width 6,885mm, height 5,050mm and a large dump truck body with a maximum loading capacity of 9,100kg. Mainly used in mining, quarries and large civil engineering works. Equipped with various elements required for a large dump truck: main frame with increased rigidity; integrated cab; VHMS (vehicle health management system); auto suspension, and electronically controlled suspension etc.

118.34€  Inc Tax
Kyosho RC Surfer 4 - Electric READYSET (KT231P+) T1 Blue (K.40110T1B)

RC Surfer returns for everyone to enjoy again

Kyosho's 4th release of the RC Surfer that amazed the world with its innovative form and function rides the waves again. Reinforced stainless shaft rudder and male board rider figure add an extra reliability. Adopt 2 graphic designs for surfboards. Not just for R/C fans, real wave riders will also appreciate the function and form of the R/C Surfer. Buoyancy material inside the surfboard structure and hollow surfer figure with floatation function combines with the auto-recovery mechanism to make the R/C Surfer unsinkable. While the natural habitat of the R/C Surfer is the sea, its dynamic control response also functions well on the flat waters of lakes and rivers. Anticorrosion materials mean you can focus on surfing the R/C Surfer in any type of water. Simply install the surfer figure onto the factory-assembled surfboard and you are ready to ride the waves without assembly or adjustment as soon as you charge the battery with Delta Peak USB Charger. The R/C Surfer 4 captures the spirit and fun of surfing like never before.

*Redesigned color scheme by 2 graphic designed surfboards.
*Pre-assembled and adjusted Readyset.
*Waterproof board design incorporates unsinkable built-in float.
*Reinforced pre-painted figure with hollow structure also functions as a float. O-ring damper in the board join reduces damage from impact shocks.
*Newly designed stainless shaft rudder adapts to banking posture and also protects screw.
*24T 540-class motor installed with water-cooling jacket maintains performance over long drive times.
*Equipped with KYOSHO SPEED HOUSE KA060-91W 60A waterproof ESC that controls high 60A current.
*RC Surfer is an RC model propelled by a screw. Cannot be used to surf without electric power.
*Figure is not movable.
*Max speed or usage time can vary depending on usage conditions.

Kit Contents:

  • Pre-colored surf board installed with R/C system, complete with linkages
  • Complete pre-painted surfer figure
  • KT-231P 2.4GHz 2ch pistol grip type transmitter
  • 7.2V-2200mAh SCR NiMH battery
  • Ni-MH battery dedicated delta peak USB charger

Required for operation:

  • AA batteries x 4 for transmitter


Technical data:

  • Length : 660mm
  • Width : 160mm
  • Height : 325mm
  • Weight : 1,500g approx
  • Motor : 540-class G24 motor with water-cooling jacket
  • Screw : D31 x P1.4 (polycarbonate)
  • Charging Time 8 hours approx
  • 16km/h approx
  • Operation time 7 min approx
253.76€  Inc Tax
Kyosho RC Surfer 4 - Electric READYSET (KT231P+) T2 Black (K.40110T2B)

RC Surfer returns for everyone to enjoy again

Kyosho's 4th release of the RC Surfer that amazed the world with its innovative form and function rides the waves again. Reinforced stainless shaft rudder and male board rider figure add an extra reliability. Adopt 2 graphic designs for surfboards. Not just for R/C fans, real wave riders will also appreciate the function and form of the R/C Surfer. Buoyancy material inside the surfboard structure and hollow surfer figure with floatation function combines with the auto-recovery mechanism to make the R/C Surfer unsinkable. While the natural habitat of the R/C Surfer is the sea, its dynamic control response also functions well on the flat waters of lakes and rivers. Anticorrosion materials mean you can focus on surfing the R/C Surfer in any type of water. Simply install the surfer figure onto the factory-assembled surfboard and you are ready to ride the waves without assembly or adjustment as soon as you charge the battery with Delta Peak USB Charger. The R/C Surfer 4 captures the spirit and fun of surfing like never before.

*Redesigned color scheme by 2 graphic designed surfboards.
*Pre-assembled and adjusted Readyset.
*Waterproof board design incorporates unsinkable built-in float.
*Reinforced pre-painted figure with hollow structure also functions as a float. O-ring damper in the board join reduces damage from impact shocks.
*Newly designed stainless shaft rudder adapts to banking posture and also protects screw.
*24T 540-class motor installed with water-cooling jacket maintains performance over long drive times.
*Equipped with KYOSHO SPEED HOUSE KA060-91W 60A waterproof ESC that controls high 60A current.
*RC Surfer is an RC model propelled by a screw. Cannot be used to surf without electric power.
*Figure is not movable.
*Max speed or usage time can vary depending on usage conditions.

Kit Contents:

  • Pre-colored surf board installed with R/C system, complete with linkages
  • Complete pre-painted surfer figure
  • KT-231P 2.4GHz 2ch pistol grip type transmitter
  • 7.2V-2200mAh SCR NiMH battery
  • Ni-MH battery dedicated delta peak USB charger

Required for operation:

  • AA batteries x 4 for transmitter


Technical data:

  • Length : 660mm
  • Width : 160mm
  • Height : 325mm
  • Weight : 1,500g approx
  • Motor : 540-class G24 motor with water-cooling jacket
  • Screw : D31 x P1.4 (polycarbonate)
  • Charging Time 8 hours approx
  • 16km/h approx
  • Operation time 7 min approx
253.76€  Inc Tax
FlyStar Styrofoam Airplane Hand Throw Model Glider 32x34cm (FGLIDER-S)
FlyStar Styrofoam Airplane Hand Throw Model Glider

Eco-Friendly Material:
EPP foam material

Very Easy Assembly:
EPP foam material, very light weight, good flexibility, impact resistance and very easy to assemble, just insert the wing and tail to the right place and you are ready to join the game.

Suitable for all ages.

Best Christmas Gift for the kids and family.

7.50€  Inc Tax
Joysway Bullet V2 Speedboat ARTR Brushless 729mm (4ST308301A)
Joysway Bullet V2 Speedboat ARTR (almost ready to run) Brushless 729mm

Electric speedboat with 729mm plastic hull for light adrenaline (top speed over 45 km/h) on larger water areas. The model is delivered almost ready-to-ride (just fit the rudder and install the receiver in the supplied waterproof balloon, charge and insert the battery packs) with the high-performance D2815 AC motor with water cooling. Cooling water is supplied through the nozzle on the rudder and expelled out of the boat from the right side. The engine power is transmitted by a direct coupling to the flexible shaft with two-blade screw. The direction of travel is controlled by a rudder made of CNC machined aluminium parts.

The dual-channel 2.4GHz pistol transmitter and receiver has to be added separately.

Access to the engine, batteries and electronics is provided through the removable sealed latch.

To power the model, use a 3-cell 11.1 V 2200 mAh Li-Poly battery with approx. 35C rating.

Box Content:
Ready-made ready-to-navigate model
Brushless motor
ESC (electronic speed controller)
Rudder servo
A spare prop screw
A plastic stand
An allen key
A rubber balloon
Instruction manual

Required for Operation:
Min. 2-Ch. Transmitter
Min. 2-Ch. Receiver
Battery Pack for Speedboat (3S 11.1V 2200mAh LiPo)
Battery Charger

189.71€  Inc Tax
Joysway Bullet Deep Vee V3 Brushless Motor Speedboat (RTR / Readyset) 740mm (JW8301V3)
Joysway Bullet Deep Vee V3 Brushless Motor Speedboat (ready to ride) 740mm

Specification:
Hull Length: 640 mm
Total Length: 740 mm
Width: 180 mm
Weight: 1.14kg (model only)
Hull Material: Plastic molded with colorful painting decal stickers

Box content:
Speedboat Bullet Deep Vee V3 Readyset 740mm
2.4GHz 2-Ch. digital proportional radio control system
Water-cooled 2815 outrunner brushless motor
60A water cooled & waterproof brushless ESC with BEC
Powerful steering 37g servo (waterproof)
CNC aluminium rudder
Shaft drive system: 4mm flex cable drive
3-blade metal propeller
Display boat stand
2x 7.4v 4000mAh 35C LiPo pack
Lipo balance charger and adapter

Required for operation:
4 x AA Alkaline batteries for transmitter

219.60€  Inc Tax
FlyStar Styrofoam Airplane Hand Throw Model Glider 36x37cm (FGLIDER-M)
FlyStar Styrofoam Airplane Hand Throw Model Glider

Eco-Friendly Material:
EPP foam material

2 Flight Modes:
Glider mode and reversal mode. There are two mounting holes in the plane's tail. Insert the small wing to the lower hole and the plane will fly in a glider mode. When you insert the small wing in the top hole the plane will fly in a reversal mode and make loops and some other tricks.

Very Easy Assembly:
EPP foam material, very light weight, good flexibility, impact resistance and very easy to assemble, just insert the wing and tail to the right place and you are ready to join the game.

Suitable for all ages.

Best Christmas Gift for the kids and family.

8.50€  Inc Tax
FlyStar Styrofoam Airplane Hand Throw Model Glider 44x49cm (FGLIDER-L)
FlyStar Styrofoam Airplane Hand Throw Model Glider

Eco-Friendly Material:
EPP foam material

2 Flight Modes:
Glider mode and reversal mode. There are two mounting holes in the plane's tail. Insert the small wing to the lower hole and the plane will fly in a glider mode. When you insert the small wing in the top hole the plane will fly in a reversal mode and make loops and some other tricks.

Very Easy Assembly:
EPP foam material, very light weight, good flexibility, impact resistance and very easy to assemble, just insert the wing and tail to the right place and you are ready to join the game.

Suitable for all ages.

Best Christmas Gift for the kids and family.

12.00€  Inc Tax
Per Page      1 - 30 of 31