ESCs

Sort By:  
Hobbywing Platinum Pro 60A ESC V4 3-6s, 7A BEC (HW30215100)

Hobbywing PLATINUM Pro 60A V4 Brushless ESC

Excellent Motor Governing Speed
High-performance 32-bit processor with a running frequency of 72MHz combined with advanced algorithm optimizes the speed governing. Together with the adjustable governor parameters guarantees every pilot a precise control experience

High Voltage Built-in BEC
The built-in switch mode BEC with an adjustable voltage range from 5V to 8V,a continuous current of over 7A and peak current of 18A can supply enough power for your servos to operate efficiently.

DEO Technology
The DEO (Driving Efficiency Optimization, or so called "Active Freewheeling") technology implemented in the ESC has multiple advantages. Quicker response to the throttle change. Higher driving efficiency, longer flight time. Lower ESC temperature and a more reliable operation.

Four Brake Modes
This Platinum 60A V4 ESC has “Brake Disabled, Normal Brake, Proportional Brake and Reverse Brake” four brake modes. The brake amount is adjustable in normal brake mode; in proportional brake mode, the brake force will be automatically allocated based on the position of the radio throttle stick; in reverse brake mode, the motor rotation can be changed via a spare transmitter channel.

Multiple Protections
Multiple protection features include,

  • ESC thermal, 
  • capacitor thermal (HOBBYWING-patented technology),
  • ESC overload,
  • throttle signal loss (or Fail Safe),
  • and low voltage cutoff effectively prolongs the service life of the ESC.

Other Features

A separate programming port for connecting the programmer on this ESC allows user to
  • Program ESC,
  • check flight data include minimum voltage, maximum temperature, standardized RPM
  • and speed curve (in Heli Governing Store mode) of the flight data recorded by the ESC,
  • Upgrade ESC firmware With a multifunction LCD program box or a Wi-Fi Module & our Apple/Android phone App.

Specifications
Brushed/Brushless: Brushless
Cont./Peak Current: 60A/80A
Input: 3-6S LiPo
BEC Output: Switch Mode:5-8V,7A
Input Wires: Red-14AWG-100mm*1/Black-14AWG-100mm*1
Output Wires: Black-14AWG-75mm*3
Input Connectors: No
Output Connectors: 3.5mm Gold Connectors (Female)
Transmitter: Not Supported
LED Program Card: Not Supported
LED Program Box: Not Supported
LCD Program Box: Supported
WiFi Module: Supported
Firmware Upgrade: Supported
Size: 48x30x15.5mm
Weight: 49g

69.54€  Inc Tax
Hobbywing Skywalker 40A ESC 2-3s, 3A BEC (HW80060020)

HOBBYWING SKYWALKER 40A SPEED CONTROLLER

Good quality components guarantees the high quality and reliability of SkyWalker series of aircraft ESCs. Multiple protection features include abnormal input voltage, ESC thermal, throttle signal loss (or Fail Safe), and low voltage cutoff effectively prolongs the service life of the ESC.

HobbyWing Skywalker Series Features:
High Quality & Reliability
Programmable Parameters
Multiple Protections

Spec Check:
Brushed/Brushless: Brushless
Cont./Peak Current: 40A/55A
Input: 2-3S LiPo
BEC Output: Linear mode:5V,3A
Input Wires: Red-14AWG-100mm*1, Black-14AWG-100mm*1
Output Wires:Black-14AWG-75mm*3
Input Connectors: 3.5 Gold Connectors (Female)
Output Connecotors: No
LED Program Card: Supported
WiFi Module: Not Supported
Size: 68.0x25.0x8.0mm
Weight: 39g


17.69€  Inc Tax
Hobbywing Skywalker 20A ESC 2-3s, 2A BEC (HW80060010)

HOBBYWING SKYWALKER 20A SPEED CONTROLLER

Good quality components guarantees the high quality and reliability of SkyWalker series of aircraft ESCs. Multiple protection features include abnormal input voltage, ESC thermal, throttle signal loss (or Fail Safe), and low voltage cutoff effectively prolongs the service life of the ESC.

HobbyWing Skywalker Series Features:
High Quality & Reliability
Programmable Parameters
Multiple Protections

Spec Check:
Brushed/Brushless: Brushless
Cont./Peak Current: 20A/25A
Input: 2-3S LiPo
BEC Output: Linear mode:5V,2A
Input Wires: Red-18AWG-100mm*1, Black-18AWG-100mm*1
Output Wires:Black-18AWG-75mm*3
Input Connectors: 3.5 Gold Connectors (Female)
Output Connecotors: No
LED Program Card: Supported
WiFi Module: Not Supported
Size: 42.0x25.0x8.0mm
Weight: 19g


15.25€  Inc Tax
Hobbywing Skywalker 80A ESC 2-6s, 5A UBEC (HW80060210)

HOBBYWING SKYWALKER 80A SPEED CONTROLLER

Good quality components guarantees the high quality and reliability of SkyWalker series of aircraft ESCs. Multiple protection features include abnormal input voltage, ESC thermal protection, throttle signal loss (or Fail Safe), and low voltage cutoff effectively prolongs the service life of the ESC.

HobbyWing Skywalker Series Features:
High Quality & Reliability
Programmable Parameters
Multiple Protections

Spec Check:
Brushed/Brushless: Brushless
Cont./Peak Current: 80A/100A
Input: 2-6S LiPo
BEC Output: Switch Mode: 5V,5A
Input Wires: Red-12AWG-150mm*1, Black-12AWG-150mm*1
Output Wires:Black-14AWG-100mm*3
Input Connectors: No
Output Connectors: No
LED Program Card: Supported
WiFi Module: Not Supported
Size: 86.0x38.0x12.0mm
Weight: 82g


39.65€  Inc Tax
Hobbywing Platinum HV 130A ESC V4 6-14s, OPTO (HW30209201)

Hobbywing PLATINUM HV 130A OPTO V4 Brushless ESC

Super Soft Start-up
Platinum V4 serial products allows the motor to start extremely smooth and avoids tail-drift issues that helicopters experience. The start-up time is adjustable from 8 to 25 seconds, this will definitely create a perfect starting point for every flight.

Excellent Motor Governing Speed
High-performance 32-bit processor with a running frequency of 72MHz combined with advanced algorithm optimizes the speed governing. Together with the adjustable governor parameters guarantees every pilot a precise control experience

Built-in Sparkproof Circuit
Built-in Arc proof circuit effectively eliminates Arc/Spark produced at the “powering-on” moment and prolongs the connectors‘ lifespan.

DEO Technology
The DEO (Driving Efficiency Optimization, or so called "Active Freewheeling") technology implemented in the ESC has multiple advantages. A very rapid response to throttle change. Higher driving efficiency, longer flight time. Lower ESC temperature and a much more reliable operation during flight.

Four Brake Modes
This Platinum HV 130A OPTO V4 ESC has “Brake Disabled, Normal Brake, Proportional  Brake and Reverse Brake” four brake modes. The brake amount is adjustable in  normal brake mode; in proportional brake mode, the brake force will be  automatically selected based on the position of the radio throttle stick; in reverse  brake mode, the motor rotation can be changed via a spare transmitter channel.

Multiple Protections
Multiple protection features include,

  • ESC thermal, 
  • capacitor thermal (HOBBYWING-patented technology),
  • ESC overload,
  • throttle signal loss (or Fail Safe),
  • and low voltage cutoff effectively prolongs the service life of the ESC.

Other Features

A separate programming port for connecting the programmer on this ESC allows user to
  • Program ESC,
  • check flight data include minimum voltage, maximum temperature, standardized RPM
  • and speed curve (in Heli Governing Store mode) of the flight data recorded by the ESC,
  • Upgrade ESC firmware With a multifunction LCD program box or a Wi-Fi Module & our Apple/Android phone App.

Specifications
Brushed/Brushless: Brushless
Cont./Peak Current: 130A/160A
Input: HV 6-14S LiPo
BEC Output: No
Input Wires: Red-12AWG-150mm*1/Black-12AWG-150mm*1
Output Wires: Black-12AWG-100mm*3
Input Connectors: No
Output Connectors: No
Transmitter: Not Supported
LED Program Card: Not Supported
LED Program Box: Not Supported
LCD Program Box: Supported
WiFi Module: Supported
Firmware Upgrade: Supported
Size: 101.0x45.5x27.0mm
Weight: 154g

249.49€  Inc Tax
Hobbywing LED Program Card (Skywalker, FlyFun) (HW86020041)
Hobbywing LED Program Card (Skywalker, FlyFun)

Overview:
This program card is for programming HobbyWing brushless aircraft ESCs.

It works with the following HobbyWing products:
FlyFun series, SkyWalker series, Guard series (discontinued), and Sword series (discontinued) of brushless aircraft.
Note: this program card doesn’t work with Platinum series of brushless aircraft ESCs.

Specifications:
Size:88x58x14mm
Weight : 40g
Input Voltage : 4.8V—6.0V (a separate battery is needed for powering this program box when ESC has no BEC)

12.81€  Inc Tax
Hobbywing Multifunction LCD Program Box (Xerun, Ezrun and Platinum) (HW30502000)
Overview
This multifunction program box is for programming HobbyWing brushless ESCs. Its friendly LCD interface makes ESC programming easy and quick. With a PC, you can upgrade ESC firmware and further adjust ESC parameters online. Besides, it’s compact, portable and very applicable for field use.

This multifunction LCD program box is applicable for the following HobbyWing products:
Platinum series of brushless aircraft ESCs, XeRun series  &EzRun series of brushless car ESCs, Seaking Pro series of brushless boat ESCs

Specifications
Size:91x51x17mm(LxWxH)
Weight:65g
Input Voltage: 4.5V—12.6V (a separate battery is needed for powering this program box when ESC has no built-in/external BEC)
Interface: Micro USB, ESC interface (Futaba plug), Power supply interface (Futaba plug)

29.89€  Inc Tax
Hobbywing LED Program Box (Xerun, Ezrun, Seaking, FlyFun, QuickRun) (HW30501003)


Overview:
This LED program box is for programming HobbyWing brushless ESCs. Its friendly interface makes ESC programming easy and quick. It’s compact, portable and very applicable for field use.

It works with the following HobbyWing products:
1. Platinum V1/V2 series & FlyFun V5 series of brushless aircraft ESCs.
2. XeRun series, EzRun series & QuicRun series of brushless car ESCs.
3. SeaKing series of brushless boat ESCs.

Specifications:
Size:88x58x14mm
Weight:40g
Input Voltage: 4.8V-8.4V (a separate battery is needed for powering this program box when ESC has no BEC)

12.81€  Inc Tax
RCE-BL25A Brushless ESC 25A (HES02501)
• BEC output voltage(6~7.4V) to show great performance on the torque & speed of servo.
• BEC output utilizing switching power system,suitable for 3S~6S Li battery, with continuous current rating of 3A, and burst rating of 7A.
• Three programmable throttle speed settings to support quick throttle response.
• Govener Mode (governor speed controller slow down system).
• Small and compact PCB design for ease of installation.
• Large heatsink for great thermal performance.
• High compatibility to work with 98% brushless motors in the market.
• Ultra smooth motor start design to run with all kinds of brushless motors.
• The power inlet adapts Japanese made "Low ESR" capacitor in order to provide stable power source.
• The BEC power outlet adapts a Japanese made specialty polymer aluminum electrolytic capacitor. It provides better noise filtering capability than other BL ESC in the market, and moreover to give more stable performanceof R/C receiver and BEC.
• Users can use the transmitter to operate the motor setting by Super stylized CPU.
• If the aircraft should land or crash in an unexpected location and become lost, the pilot can enable the Aircraft Locator Option. The Aircraft Locator Option is engaged by tuming off the transmitter. When the ESC does not receive a signal from the transmitter for 30 seconds, it will start to send an alarm to the motor. The sound of the alarm will aid the pilot to locate the aircraft. This option will not work with a PCM receiver that has SAVE function enabled, or with low noise resistant PM receivers.

Specifications
Continuous current: 25A
Surge current: 40A (for 15seconds)
Supporting motor types: 2 poles to 10+poles in/outrunner brushless motors
Supporting maximum RPM: 2poles=>190,000rpm, 6poles=>63,000rpm
Supporting input voltage: 11.1V to 22.2V
Supporting battery types: Li-Ion / Li-Po 3-6 cells
BEC output: 6.0V - 7.4V, 3A (Burst 7A)
Size: 47x22x10mm
Weight: 27g

Content
• 1x RCM-BL300MX Brushless Motor 3700KV
• 2x Socket Screw (M2.5x6mm)
• 3x ALIGN standard 3.5mm gilt terminal



41.48€  Inc Tax
Hobbywing Skywalker 15A ESC 2-3s, 2A BEC (HW30205150)

HOBBYWING SKYWALKER 15A SPEED CONTROLLER

Good quality components guarantees the high quality and reliability of SkyWalker series of aircraft ESCs. Multiple protection features include abnormal input voltage, ESC thermal, throttle signal loss (or Fail Safe), and low voltage cutoff effectively prolongs the service life of the ESC.

HobbyWing Skywalker Series Features:
High Quality & Reliability
Programmable Parameters
Multiple Protections

Spec Check:
Brushed/Brushless: Brushless
Cont./Peak Current: 15A/20A
Input: 2-3S LiPo
BEC Output: Linear mode:5V,2A
Input Wires: Red-20AWG-100mm*1, Black-20AWG-100mm*1
Output Wires:Black-20AWG-100mm*3
Input Connectors: No
Output Connecotors: No
LED Program Card: Supported
WiFi Module: Not Supported
Size: 48.0x22.5x6.0mm
Weight: 17g


14.03€  Inc Tax
Hobbywing Skywalker 12A ESC 2-3s, 2A BEC (HW80060170)
HOBBYWING SKYWALKER 12AE SPEED CONTROLLER

Good quality components guarantees the high quality and reliability of SkyWalker series of aircraft ESCs. Multiple protection features include abnormal input voltage, ESC thermal, throttle signal loss (or Fail Safe), and low voltage cutoff effectively prolongs the service life of the ESC.

HobbyWing Skywalker Series Features:
High Quality & Reliability
Programmable Parameters
Multiple Protections

Spec Check:
Brushed/Brushless: Brushless
Cont./Peak Current: 12A/15A
Input: 2-3S LiPo
BEC Output: Linear mode:5V,2A
Input Wires: Red-20AWG-100mm*1, Black-20AWG-100mm*1
Output Wires:Black-20AWG-100mm*3
Input Connectors: No
Output Connecotors: No
LED Program Card: Supported
WiFi Module: Not Supported
Size: 38.0x18.0x7.0mm
Weight: 10g


12.81€  Inc Tax
Hobbywing Skywalker 50A ESC 2-4s, 5A UBEC (HW30216000)

HOBBYWING SKYWALKER 50A-UBEC (NEW VERSION WITH 5A BEC) SPEED CONTROLLER

Good quality components guarantees the high quality and reliability of SkyWalker series of aircraft ESCs. Multiple protection features include abnormal input voltage, ESC thermal protection, throttle signal loss (or Fail Safe), and low voltage cutoff effectively prolongs the service life of the ESC.

HobbyWing Skywalker Series Features:
High Quality & Reliability
Programmable Parameters
Multiple Protections

Spec Check:
Brushed/Brushless: Brushless
Cont./Peak Current: 50A/65A
Input: 2-4S LiPo
BEC Output: Switch Mode:5V,5A
Input Wires: Red-14AWG-100mm*1, Black-14AWG-100mm*1
Output Wires:Black-14AWG-75mm*3
Input Connectors: 3.5 Gold Connectors (Female)
Output Connecotors: No
LED Program Card: Supported
WiFi Module: Not Supported
Size: 65.0x25.0x12.0mm
Weight: 43g


19.52€  Inc Tax
Hobbywing Skywalker 60A ESC 2-6s, 5A UBEC (HW80060220)

HOBBYWING SKYWALKER 60A SPEED CONTROLLER

Good quality components guarantees the high quality and reliability of SkyWalker series of aircraft ESCs. Multiple protection features include abnormal input voltage, ESC thermal protection, throttle signal loss (or Fail Safe), and low voltage cutoff effectively prolongs the service life of the ESC.

HobbyWing Skywalker Series Features:
High Quality & Reliability
Programmable Parameters
Multiple Protections

Spec Check:
Brushed/Brushless: Brushless
Cont./Peak Current: 60A/80A
Input: 2-6S LiPo
BEC Output: Switch Mode: 5V,5A
Input Wires: Red-14AWG-100mm*1, Black-14AWG-100mm*1
Output Wires:Black-14AWG-100mm*3
Input Connectors: No
Output Connectors: No
LED Program Card: Supported
WiFi Module: Not Supported
Size: 77.0x35.0x14.0mm
Weight: 63g


29.89€  Inc Tax
Hobbywing Platinum Pro 25A ESC V4 3-6s, 3A BEC (HW30204200)

Hobbywing PLATINUM 25A V4 Brushless ESC

Excellent Motor Governing Speed
High-performance 32-bit processor with a running frequency of 72MHz combined with advanced algorithm optimizes the speed governing. Together with the adjustable governor parameters guarantees every pilot a precise control experience

High Voltage Built-in BEC
The built-in switch mode BEC with an adjustable voltage (6V/7.4V for the Platinum 25A V4, 5V~8V with the step of 0.1V for the Platinum 40A V4), a continuous current of over 3A/7A (3A for the Platinum 25A V4, 7A for the Platinum 40A V4) and a peak current of 7A/18A (7A for the Platinum 25A V4, 18A for the Platinum 40A V4) can supply enough power for your servos to operate efficiently.

DEO Technology
The DEO (Driving Efficiency Optimization, or so called "Active Freewheeling") technology implemented in the ESC has multiple advantages. Quicker response to the throttle change. Higher driving efficiency, longer flight time. Lower ESC temperature and a more reliable operation.

Reverse Brake
With the Reverse Brake mode enabled when landing can effectively shorten the sliding distance of the fixed-wing aircraft to simulate the landing of a real aircraft (within a super short distance). The Normal Brake Mode, Proportional Brake mode, and Brake Disabled mode are also available; the brake amount is adjustable in normal brake mode while in proportional brake mode, the brake force will be automatically allotted on the basis of the position of radio throttle stick.


Multiple Protections
Multiple protection features include,
  • ESC thermal, 
  • capacitor thermal (HOBBYWING-patented technology),
  • ESC overload,
  • throttle signal loss (or Fail Safe),
  • and low voltage cutoff effectively prolongs the service life of the ESC.

Other Features

A separate programming port for connecting the programmer on this ESC allows user to
  • Program ESC,
  • check flight data include minimum voltage, maximum temperature, standardized RPM
  • and speed curve (in Heli Governing Store mode) of the flight data recorded by the ESC,
  • Upgrade ESC firmware With a multifunction LCD program box or a Wi-Fi Module & our
  • Apple/Android phone App.

Specifications
Brushed/Brushless: Brushless
Cont./Peak Current: 25A/40A
Input: 3-6S LiPo
BEC Output: Switch Mode:6V/7.4V,3A
Input Wires: Red-16AWG-100mm*1/Black-16AWG-100mm*1
Output Wires: Black-18AWG-100mm*3
Input Connectors: No
Output Connectors: 3.5mm Gold Connectors (Female)
Transmitter: Not Supported
LED Program Card: Not Supported
LED Program Box: Not Supported
LCD Program Box: Supported
WiFi Module: Supported
Firmware Upgrade: Supported
Size: 47x22x10mm
Weight: 27g

34.89€  Inc Tax
Hobbywing Platinum Pro 40A ESC V4 3-4s, 7A BEC (HW30215001)

Hobbywing PLATINUM Pro 40A V4 Brushless ESC

Excellent Motor Governing Speed
High-performance 32-bit processor with a running frequency of 72MHz combined with advanced algorithm optimizes the speed governing. Together with the adjustable governor parameters guarantees every pilot a precise control experience

High Voltage Built-in BEC
The built-in switch mode BEC with an adjustable voltage (6V/7.4V for the Platinum 25A V4, 5V~8V with the step of 0.1V for the Platinum 40A V4), a continuous current of over 3A/7A (3A for the Platinum 25A V4, 7A for the Platinum 40A V4) and a peak current of 7A/18A (7A for the Platinum 25A V4, 18A for the Platinum 40A V4) can supply enough power for your servos to operate efficiently.

DEO Technology
The DEO (Driving Efficiency Optimization, or so called "Active Freewheeling") technology implemented in the ESC has multiple advantages. Quicker response to the throttle change. Higher driving efficiency, longer flight time. Lower ESC temperature and a more reliable operation.

Reverse Brake
With the Reverse Brake mode enabled when landing can effectively shorten the sliding distance of the fixed-wing aircraft to simulate the landing of a real aircraft (within a super short distance). The Normal Brake Mode, Proportional Brake mode, and Brake Disabled mode are also available; the brake amount is adjustable in normal brake mode while in proportional brake mode, the brake force will be automatically allotted on the basis of the position of radio throttle stick.


Multiple Protections
Multiple protection features include,
  • ESC thermal, 
  • capacitor thermal (HOBBYWING-patented technology),
  • ESC overload,
  • throttle signal loss (or Fail Safe),
  • and low voltage cutoff effectively prolongs the service life of the ESC.

Other Features

A separate programming port for connecting the programmer on this ESC allows user to
  • Program ESC,
  • check flight data include minimum voltage, maximum temperature, standardized RPM
  • and speed curve (in Heli Governing Store mode) of the flight data recorded by the ESC,
  • Upgrade ESC firmware With a multifunction LCD program box or a Wi-Fi Module & our
  • Apple/Android phone App.

Specifications
Brushed/Brushless: Brushless
Cont./Peak Current: 40A/60A
Input: 3-4S LiPo
BEC Output: Switch Mode:5-8V,7A
Input Wires: Red-14AWG-100mm*1/Black-14AWG-100mm*1
Output Wires: Black-16AWG-75mm*3
Input Connectors: No
Output Connectors: 3.5mm Gold Connectors (Female)
Transmitter: Not Supported
LED Program Card: Not Supported
LED Program Box: Not Supported
LCD Program Box: Supported
WiFi Module: Supported
Firmware Upgrade: Supported
Size: 48x30x15mm
Weight: 47g

49.41€  Inc Tax
Hobbywing Platinum Pro 80A ESC V4 3-6s, 10A BEC (HW30203200)

Hobbywing PLATINUM Pro 80A V4 Brushless ESC

Super Soft Start-up
Platinum V4 serial products allows the motor to start extremely smooth and avoids tail-drift issues that helicopters experience. The start-up time is adjustable from 8 to 25 seconds, this will definitely create a perfect starting point for every flight.

Excellent Motor Governing Speed
High-performance 32-bit processor with a running frequency of 72MHz combined with advanced algorithm optimizes the speed governing. Together with the adjustable governor parameters guarantees every pilot a precise control experience

High Voltage Built-in BEC
The built-in switch mode BEC with an adjustable voltage range from 5V to 8V, a continuous current of over 10A and peak current of 25A can supply enough power for your HV servos to operate at their peak.

DEO Technology
The DEO (Driving Efficiency Optimization, or so called "Active Freewheeling") technology implemented in the ESC has multiple advantages. A very rapid response to throttle change. Higher driving efficiency, longer flight time. Lower ESC temperature and a much more reliable operation during flight.

Four Brake Modes
This Platinum 80A V4 ESC has “Brake Disabled, Normal Brake, Proportional Brake and Reverse Brake” four brake modes. The brake amount is adjustable in normal brake mode; in proportional brake mode, the brake force will be automatically selected based on the position of the radio throttle stick; in reverse brake mode, the motor rotation can be changed via a spare transmitter channel.

Multiple Protections
Multiple protection features include,

  • ESC thermal, 
  • capacitor thermal (HOBBYWING-patented technology),
  • ESC overload,
  • throttle signal loss (or Fail Safe),
  • and low voltage cutoff effectively prolongs the service life of the ESC.

Other Features

A separate programming port for connecting the programmer on this ESC allows user to
  • Program ESC,
  • check flight data include minimum voltage, maximum temperature, standardized RPM
  • and speed curve (in Heli Governing Store mode) of the flight data recorded by the ESC,
  • Upgrade ESC firmware With a multifunction LCD program box or a Wi-Fi Module & our Apple/Android phone App.

Specifications
Brushed/Brushless: Brushless
Cont./Peak Current: 80A/100A
Input: 3-6S LiPo
BEC Output: Switch Mode:5-8V,10A
Input Wires: Red-12AWG-150mm*1/Black-12AWG-150mm*1
Output Wires: Black-12AWG-100mm*3
Input Connectors: No
Output Connectors: 4.0mm Gold Connectors (Female)
Transmitter: Not Supported
LED Program Card: Not Supported
LED Program Box: Not Supported
LCD Program Box: Supported
WiFi Module: Supported
Firmware Upgrade: Supported
Size: 84.3x38.2x20.4mm
Weight: 97g

99.43€  Inc Tax
Hobbywing Platinum Pro 120A ESC V4 3-6s, 10A BEC (HW30203401)

Hobbywing PLATINUM Pro 120A V4 Brushless ESC

Super Soft Start-up
Platinum V4 serial products allows the motor to start extremely smooth and avoids tail-drift issues that helicopters experience. The start-up time is adjustable from 8 to 25 seconds, this will definitely create a perfect starting point for every flight.

Excellent Motor Governing Speed
High-performance 32-bit processor with a running frequency of 72MHz combined with advanced algorithm optimizes the speed governing. Together with the adjustable governor parameters guarantees every pilot a precise control experience

High Voltage Built-in BEC
The built-in switch mode BEC with an adjustable voltage range from 5V to 8V, a continuous current of over 10A and peak current of 25A can supply enough power for your HV servos to operate at their peak.

DEO Technology
The DEO (Driving Efficiency Optimization, or so called "Active Freewheeling") technology implemented in the ESC has multiple advantages. A very rapid response to throttle change. Higher driving efficiency, longer flight time. Lower ESC temperature and a much more reliable operation during flight.

Four Brake Modes
This Platinum 120A V4 ESC has “Brake Disabled, Normal Brake, Proportional Brake and Reverse Brake” four brake modes. The brake amount is adjustable in normal brake mode; in proportional brake mode, the brake force will be automatically selected based on the position of the radio throttle stick; in reverse brake mode, the motor rotation can be changed via a spare transmitter channel.

Multiple Protections
Multiple protection features include,

  • ESC thermal, 
  • capacitor thermal (HOBBYWING-patented technology),
  • ESC overload,
  • throttle signal loss (or Fail Safe),
  • and low voltage cutoff effectively prolongs the service life of the ESC.

Other Features

A separate programming port for connecting the programmer on this ESC allows user to
  • Program ESC,
  • check flight data include minimum voltage, maximum temperature, standardized RPM
  • and speed curve (in Heli Governing Store mode) of the flight data recorded by the ESC,
  • Upgrade ESC firmware With a multifunction LCD program box or a Wi-Fi Module & our Apple/Android phone App.

Specifications
Brushed/Brushless: Brushless
Cont./Peak Current: 120A/150A
Input: 3-6S LiPo
BEC Output: Switch Mode:5-8V,10A
Input Wires: Red-12AWG-150mm*1/Black-12AWG-150mm*1
Output Wires: Black-12AWG-100mm*3
Input Connectors: No
Output Connectors: 4.0mm Gold Connectors (Female)
Transmitter: Not Supported
LED Program Card: Not Supported
LED Program Box: Not Supported
LCD Program Box: Supported
WiFi Module: Supported
Firmware Upgrade: Supported
Size: 84.3x38.2x20.4mm
Weight: 107g

139.69€  Inc Tax
Hobbywing Platinum HV 130A ESC V4 6-14s, 10A BEC (HW30209200)

Hobbywing PLATINUM HV 130A V4 Brushless ESC, 10A BEC

Super Soft Start-up
Platinum V4 serial products allows the motor to start extremely smooth and avoids tail-drift issues that helicopters experience. The start-up time is adjustable from 8 to 25 seconds, this will definitely create a perfect starting point for every flight.

Excellent Motor Governing Speed
High-performance 32-bit processor with a running frequency of 72MHz combined with advanced algorithm optimizes the speed governing. Together with the adjustable governor parameters guarantees every pilot a precise control experience

High Voltage Built-in BEC
The built-in switch mode BEC with an adjustable voltage range from 5V to 8V, a continuous current of over 10A and peak current of 25A can supply enough power for your HV servos to operate at their peak.

Built-in Sparkproof Circuit
Built-in Arc proof circuit effectively eliminates Arc/Spark produced at the “powering-on” moment and prolongs the connectors‘ lifespan.

DEO Technology
The DEO (Driving Efficiency Optimization, or so called "Active Freewheeling") technology implemented in the ESC has multiple advantages. A very rapid response to throttle change. Higher driving efficiency, longer flight time. Lower ESC temperature and a much more reliable operation during flight.

Four Brake Modes
This Platinum HV 130A V4 ESC has “Brake Disabled, Normal Brake, Proportional Brake and Reverse Brake” four brake modes. The brake amount is adjustable in normal brake mode; in proportional brake mode, the brake force will be automatically selected based on the position of the radio throttle stick; in reverse brake mode, the motor rotation can be changed via a spare transmitter channel.

Multiple Protections
Multiple protection features include,

  • ESC thermal, 
  • capacitor thermal (HOBBYWING-patented technology),
  • ESC overload,
  • throttle signal loss (or Fail Safe),
  • and low voltage cutoff effectively prolongs the service life of the ESC.

Other Features

A separate programming port for connecting the programmer on this ESC allows user to
  • Program ESC,
  • check flight data include minimum voltage, maximum temperature, standardized RPM
  • and speed curve (in Heli Governing Store mode) of the flight data recorded by the ESC,
  • Upgrade ESC firmware With a multifunction LCD program box or a Wi-Fi Module & our Apple/Android phone App.

Specifications
Brushed/Brushless: Brushless
Cont./Peak Current: 130A/160A
Input: HV 6-14S LiPo
BEC Output: Switch Mode:5-8V,10A
Input Wires: Red-12AWG-150mm*1/Black-12AWG-150mm*1
Output Wires: Black-12AWG-100mm*3
Input Connectors: No
Output Connectors: No
Transmitter: Not Supported
LED Program Card: Not Supported
LED Program Box: Not Supported
LCD Program Box: Supported
WiFi Module: Supported
Firmware Upgrade: Supported
Size: 101.0x45.5x27.0mm
Weight: 169g

329.40€  Inc Tax
Hobbywing Platinum HV 200A ESC V4 6-14s, 10A BEC (HW30209101)

Hobbywing PLATINUM HV 200A V4 Brushless ESC, 10A BEC

Exquisite Design & Quality Components

The elegant cases are made by Aluminum. Top level components combined with the exquisite industrial design guarantee the Platinum HV 200A SBEC V4.1 ESC the unmatchable quality & look.

Integrated Heat-dissipation Structure
The improved structure solves the heat-dissipation problem of the “Sandwich” stacking circuit board. The appropriate circuit distribution allows all components on both sides of circuit boards to quickly conduct heat to the Aluminum cases. The way of heat dissipation maximizes the cooling and guarantees the Platinum HV 200A SBEC V4.1 ESC always operates in cool & stable condition.

Platinum HV 200A SBEC V4.1 (New) Way of Heat Dissipation
● The power board dissipates heat via the Aluminum upper & medial cases;
● The control board dissipates heat via those holes on the medial case;
● The BEC circuit board (at the bottom) dissipates heat via the Aluminum lower case.

Excellent Speed-governing
High-performance 32-bit processor combined with advanced algorithm makes the speed-governing excellent for different conditions. With the adjustable sensitivity of speed-governing, every pilot can find the most suitable settings for his helicopter.

Super Backflow-proof Switch-mode BEC
The built-in switch-mode BEC with continuously adjustable output voltage range from 5V to 8V (step: 0.1V) supports connecting a 2S backup battery (to the connection) in parallel for improving the safety and reliability, its backflow-proof circuit prevents the voltage (which is higher than the BEC voltage) from the servo or backup battery from flowing back to the BEC. The addition of buffer enhances the output of high peak current to make the servo response more precise and quick.

Intelligent and Variable Frequency Soft-start Technology
Based on the original super soft-start technology, the intelligent and variable frequency soft-start technology combined with the adjustable throttle response time guarantees motors ultra-soft and smooth start and ZERO blade-drift issues of helicopter, this definitely creates a perfect starting for every flight.

Built-in Spark-proof Circuit
The built-in spark-proof circuit effectively eliminates bthe sparks produced when the ESC is powered on and extends the service life of connectors.

Specifications
Brushed/Brushless: Brushless
Cont./Peak Current: 200A/300A
Input: HV 6-14S LiPo
BEC Output: Switch Mode:5-8V,10A
Input Wires: Red-8AWG-150mm*1/Black-8AWG-150mm*1
Output Wires: Black-10AWG-150mm*3
Input Connectors: No
Output Connectors: No
Transmitter: Not Supported
LED Program Card: Not Supported
LED Program Box: Not Supported
LCD Program Box: Supported
WiFi Module: Supported
Firmware Upgrade: Supported
Size: 105.0x50.0x36.0mm
Weight: 325g



439.20€  Inc Tax
Hobbywing Platinum HV 200A ESC V4 6-14s, OPTO (HW30209102)

Hobbywing PLATINUM HV 200A V4 Brushless ESC, OPTO

Exquisite Design & Quality Components

The elegant cases are made by Aluminum. Top level components combined with the exquisite industrial design guarantee the Platinum HV 200A OPTO V4.1 ESC the unmatchable quality & look.

Integrated Heat-dissipation Structure
The improved structure solves the heat-dissipation problem of the “Sandwich” stacking circuit board. The appropriate circuit distribution allows all components on both sides of circuit boards to quickly conduct heat to the Aluminum cases. The way of heat dissipation maximizes the cooling and guarantees the Platinum HV 200A OPTO V4.1 ESC always operates in cool & stable condition.

Platinum HV 200A OPTO V4.1 (New) Way of Heat Dissipation
● The power board dissipates heat via the Aluminum upper & medial cases;
● The control board dissipates heat via those holes on the medial case;
● The circuit board (at the bottom) dissipates heat via the Aluminum lower case.

Excellent Speed-governing
High-performance 32-bit processor combined with advanced algorithm makes the speed-governing excellent for different conditions. With the adjustable sensitivity of speed-governing, every pilot can find the most suitable settings for his helicopter.

Intelligent and Variable Frequency Soft-start Technology
Based on the original super soft-start technology, the intelligent and variable frequency soft-start technology combined with the adjustable throttle response time guarantees motors ultra-soft and smooth start and ZERO blade-drift issues of helicopter, this definitely creates a perfect starting for every flight.

Built-in Spark-proof Circuit
The built-in spark-proof circuit effectively eliminates bthe sparks produced when the ESC is powered on and extends the service life of connectors.

Specifications
Brushed/Brushless: Brushless
Cont./Peak Current: 200A/300A
Input: HV 6-14S LiPo
BEC Output: NO
Input Wires: Red-8AWG-150mm*1/Black-8AWG-150mm*1
Output Wires: Black-10AWG-150mm*3
Input Connectors: No
Output Connectors: No
Transmitter: Not Supported
LED Program Card: Not Supported
LED Program Box: Not Supported
LCD Program Box: Supported
WiFi Module: Supported
Firmware Upgrade: Supported
Size: 105.0x50.0x36.0mm
Weight: 325g

399.55€  Inc Tax
Hobbywing Platinum Pro 100A V3 ESC 2-6s, 10A BEC (HW30203900)

Hobbywing PLATINUM Pro 100A V3 Brushless ESC

New Design & Excellent Performance
New structure design combined with high-performance micro-processor guarantees users efficient heat dissipation, good compatibility (with various motors), high driving efficiency and much more.

Great Power Output
This Platinum 100A V3 ESC features a continuous current of 100A and a peak current of up to 150A guarantees users high and stable output at all times during the flight.

High Voltage Built-in BEC
The built-in switch mode BEC with adjustable voltage between 6.0V/7.4V/8.4V, can supply a continuous current of over 10A and a peak current of 25A can supply enough power for your servos to operate efficiently.

Efficient Heat-dissipating System
Besides the heatsink on Platinum 100A V3, an extra coolingfan is included in product box to maximize cooling performance (Users can mount it to the ESC heatsink if necessary).

Four Flight Modes & “Auto Restart” Function
This Platinum Pro 100A V3 ESC features “Fixed-wing/Helicopter (Linear Throttle), Helicopter (Elf Governor) and Helicopter (Store Governor)” four flight modes and “Auto Restart (Time)” function that guarantees users excellent speed-governing performance in Heli Governor mode and allows users to cut off output and restart the motor to avoiding possible crash caused by improper operation.

Multiple Protections
Multiple protection feature includes abnormal input voltage, ESC thermal protection, throttle signal loss (or Fail Safe), and low voltage cut off that effectively prolongs the service life of the ESC.

Specifications

Brushed/Brushless: Brushless
Cont./Peak Current: 100A/150A
Input: 2-6S LiPo
BEC Output: Switch Mode: 6V/7.4V/8.4V, 10Amp
Input Wires: Red-12AWG-150mm*1/Black-12AWG-150mm*1
Output Wires: Black-12AWG-100mm*3
Input Connectors: No
Output Connectors: 4mm Gold Connectors (Female)
Transmitter: Supported
LED Program Card: Not Supported
LED Program Box: Not Supported
LCD Program Box: Supported
WiFi Module: Supported
Firmware Upgrade: Supported
Size: 70x35x21mm
Weight: 104g

89.67€  Inc Tax
Hobbywing Seaking 180A V3 3-6S Boat ESC System, 5A BEC (HW30302401)
Hobbywing Seaking 180A V3 3-6S Boat ESC System, 5A BEC

Performance & Reliability
Built with high-quality components and coupled with cutting-edge firmware, the Seaking 180A V3 is featured by unmatched performance and reliability. Multiple safety adjustable options are in use, with the implementation of the low-voltage cutoff protection, thermal protection and throttle signal loss protection.

Efficient Cooling System
The Hobbywing patented heat-conductive copper bar cover on the power board of the Seaking 180A V3 can efficiently and effectively transfer heat to the integrated CNC machined billet aluminum water cooled heat sink housing thus keeping your ESC as cool as possible.

Waterproof Design
100% waterproof without the need of extra protection.

Built-in BEC
The built-in switch mode BEC with a maximum output of 5A and voltage of 6V make this ESC compatible with high voltage servo.

Special Algorithm Design
The special algorithm implemented in the ESC make the acceleration more incredible and sailing more stable.

Separate PRG/FAN Port
The separate PRG/FAN port on the ESC can connect ESC to a program box (via the standard programming cable) and start ESC programming.

Specifications
Brushed/Brushless: Brushless
Waterproof: Yes
Cont./Peak Current: 180A/1080A
Input: 3-6S LiPo / 9-18 cells NiMh
BEC Output: Switch Mode: 6V, 5Amp
Input Wires: Red-10AWG-200mm*1/Black-10AWG-200mm*1
Output Wires: Black-10AWG-150mm*3
Input Connectors: No
Output Connectors: 6mm gold connectors (female)
Transmitter: Supported
LED Program Card: Not Supported
LED Program Box: Supported
LCD Program Box: Not Supported
WiFi Module: Not Supported
Firmware Upgrade: Not Supported
Size: 72x48x37mm
Weight: 207g
Cooling pipe: Ф3.0/5.4 mm
Application: Boat length <130cm

139.69€  Inc Tax
Hobbywing Seaking 130A HV V3 5-12S Boat ESC System (HW30301200)
Hobbywing Seaking 130A HV (high voltage) V3 5-12S Boat ESC System (without BEC)

Performance & Reliability
Built with high-quality components and coupled with cutting-edge firmware, the Seaking 130A V3 is featured by unmatched performance and reliability. Multiple safety adjustable options are in use, with the implementation of the low-voltage cutoff protection, thermal protection and throttle signal loss protection.

Efficient Cooling System
The Hobbywing patented heat-conductive copper bar cover on the power board of the Seaking 130A V3 can efficiently and effectively transfer heat to the integrated CNC machined billet aluminum water cooled heat sink housing thus keeping your ESC as cool as possible.

Waterproof Design
100% waterproof without the need of extra protection.

Special Algorithm Design
The special algorithm implemented in the ESC make the acceleration more incredible and sailing more stable.

Separate PRG/FAN Port
The separate PRG/FAN port on the ESC can connect ESC to a program box (via the standard programming cable) and start ESC programming.

Specifications
Brushed/Brushless: Brushless
Waterproof: Yes
Cont./Peak Current: 130A/720A
Input: 5-12S LiPo / 15-36 cells NiMh
BEC Output: (without BEC)
Input Wires: Red-10AWG-200mm*1/Black-10AWG-200mm*1
Output Wires: Black-12AWG-100mm*3
Input Connectors: No
Output Connectors: No
Transmitter: Supported
LED Program Card: Not Supported
LED Program Box: Supported
LCD Program Box: Not Supported
WiFi Module: Not Supported
Firmware Upgrade: Not Supported
Size: 88x58x23mm
Cooling pipe: Ф3.6/5.0 mm
Weight: 182g
Application: Boat length <150cm

199.47€  Inc Tax
Hobbywing Seaking 120A V3 2-6S Boat ESC System, 5A BEC (HW30302360)
Hobbywing Seaking 120A V3 2-6S Boat ESC System, 5A BEC

Performance & Reliability
Built with high-quality components and coupled with cutting-edge firmware, the Seaking 120A V3 is featured by unmatched performance and reliability. Multiple safety adjustable options are in use, with the implementation of the low-voltage cutoff protection, thermal protection and throttle signal loss protection.

Efficient Cooling System
The Hobbywing patented heat-conductive copper bar cover on the power board of the Seaking 120A V3 can efficiently and effectively transfer heat to the integrated CNC machined billet aluminum water cooled heat sink housing thus keeping your ESC as cool as possible.

Waterproof Design
100% waterproof without the need of extra protection.

Built-in BEC
The built-in switch mode BEC with a maximum output of 5A and voltage of 6V make this ESC compatible with high voltage servo.

Special Algorithm Design
The special algorithm implemented in the ESC make the acceleration more incredible and sailing more stable.

Separate PRG/FAN Port
The separate PRG/FAN port on the ESC can connect ESC to a program box (via the standard programming cable) and start ESC programming.

Specifications
Brushed/Brushless: Brushless
Waterproof: Yes
Cont./Peak Current: 120A/720A
Input: 2-6S LiPo / 6-18 cells NiMh
BEC Output: Switch Mode: 6V, 5Amp
Input Wires: Red-12AWG-200mm*1/Black-12AWG-200mm*1
Output Wires: Black-12AWG-150mm*3
Input Connectors: No
Output Connectors: 4mm gold connectors (female)
Transmitter prog.: Supported
LED Program Card: Not Supported
LED Program Box: Supported
LCD Program Box: Not Supported
WiFi Module: Not Supported
Firmware Upgrade: Not Supported
Size: 69x40x32mm
Cooling pipe: Ф3.0/5.4 mm
Weight: 150g
Application: Boat length <110cm

99.43€  Inc Tax
Hobbywing Seaking 60A V3.1 2-3S Boat ESC System, 3A BEC (HW30302200)
Hobbywing Seaking 60A V3.1 2-3S Boat ESC System, 3A BEC

Performance & Reliability
Built with high-quality components and coupled with cutting-edge firmware, the Seaking 60A V3.1 is featured by unmatched performance and reliability. Multiple safety adjustable options are in use, with the implementation of the low-voltage cutoff protection, thermal protection and throttle signal loss protection.

Efficient Cooling System
The Hobbywing patented heat-conductive copper bar cover on the power board of the Seaking 60A V3.1 can efficiently and effectively transfer heat to the integrated CNC machined billet aluminum water cooled heat sink housing thus keeping your ESC as cool as possible.

Waterproof Design
100% waterproof without the need of extra protection.

Built-in BEC
The built-in switch mode BEC with a maximum output of 3A and voltage of 6V make this ESC compatible with high voltage servo.

Special Algorithm Design
The special algorithm implemented in the ESC make the acceleration more incredible and sailing more stable.

Separate PRG/FAN Port
The separate PRG/FAN port on the ESC can connect ESC to a program box (via the standard programming cable) and start ESC programming.

Specifications
Brushed/Brushless: Brushless
Waterproof: Yes
Cont./Peak Current: 60A/360A
Input: 2-3S LiPo / 5-9 cells NiMh
BEC Output: Switch Mode: 6V, 3Amp
Input Wires: Red-14AWG-150mm*1/Black-14AWG-150mm*1
Output Wires: Black-14AWG-100mm*3
Input Connectors: No
Output Connectors: 4mm gold connectors (female)
Transmitter prog.: Supported
LED Program Card: Not Supported
LED Program Box: Supported
LCD Program Box: Not Supported
WiFi Module: Not Supported
Firmware Upgrade: Not Supported
Size: 61x39x26mm
Cooling pipe: Ф2.0/4.0 mm
Weight: 95g
Application: Boat length <70cm

79.91€  Inc Tax
Hobbywing Seaking 30A V3 2-3S Boat ESC System, 1A BEC (HW30302060)
Hobbywing Seaking 30A V3 2-3S Boat ESC System, 1A BEC

Performance & Reliability
Built with high-quality components and coupled with cutting-edge firmware, the Seaking 30A V3 is featured by unmatched performance and reliability. Multiple safety adjustable options are in use, with the implementation of the low-voltage cutoff protection, thermal protection and throttle signal loss protection.

Efficient Cooling System
The Hobbywing patented heat-conductive copper bar cover on the power board of the Seaking 30A V3 can efficiently and effectively transfer heat to the integrated CNC machined billet aluminum water cooled heat sink housing thus keeping your ESC as cool as possible.

Waterproof Design
100% waterproof without the need of extra protection.

Built-in BEC
The built-in switch mode BEC with a maximum output of 1A and voltage of 6V make this ESC compatible with high voltage servo.

Special Algorithm Design
The special algorithm implemented in the ESC make the acceleration more incredible and sailing more stable.

Separate PRG/FAN Port
The separate PRG/FAN port on the ESC can connect ESC to a program box (via the standard programming cable) and start ESC programming.

Specifications
Brushed/Brushless: Brushless
Waterproof: Yes
Cont./Peak Current: 30A/180A
Input: 2-3S LiPo / 5-9 cells NiMh
BEC Output: Switch Mode: 6V, 1Amp
Input Wires: Red-14AWG-100mm*1/Black-14AWG-100mm*1
Output Wires: Black-16AWG-75mm*3
Input Connectors: No
Output Connectors: 3.5mm gold connectors (female)
Transmitter prog.: Supported
LED Program Card: Not Supported
LED Program Box: Supported
LCD Program Box: Not Supported
WiFi Module: Not Supported
Firmware Upgrade: Not Supported
Size: 55x29x19mm
Cooling pipe: Ф2.0/4.0 mm
Weight: 41g
Application: Boat length <45cm

39.65€  Inc Tax
Hobbywing XeRun XR8 Plus Brushless ESC 150A 2-6S, 6A BEC (HW30113300)
Hobbywing XeRun XR8 Plus Brushless ESC 150A 2-6S, 6A BEC

Hobbywing's Xerun XR8 Plus was developed to deliver unmatched power, performance and reliability for demanding 1/8 scale racing applications. Built with high quality components and loaded with cutting edge firmware, the XR8 Plus is responsive enough to protect itself from damage due to abuse, overuse, or even human error. With it's incredible power output and adjustable parameters, the XR8 Plus will deliver the smooth throttle response and linear throttle/brake qualities that discriminating drivers demand.

Features:

Built In High Voltage BEC:
The XR8 Plus is the first 1/8 ESC that includes an integrated HV BEC with 15 Amp output current, and adjustable output voltage from 6 to 7.2V. This BEC is designed to handle power hungry servos with ease.

Reliable Cooling System:
Patented cooling technology utilizes proprietary heat conductive copper bars to rapidly and effectively transfer all internal heat from the MOSFET board to the integrated CNC machined billet aluminum heatsink housing. The cooling fan utilizes a shock proof mounting system that reduces the possibility of fan damage due to the repeated shock of landing jumps in an 1/8 scale off road environment.

Coasting:
The XR8 Plus provides exceptionally smooth off throttle coasting function (patent pending), which simulates the feeling of inertia and momentum of a large scale car driving experience. This greatly improves the performance of builds that utilize large high powered motors, as electromagnetic drag becomes a substantial factor in sudden deceleration when in the off throttle position, adversely affecting race performance and handling.

Advanced and Secure Electronic Switch:
The XR8 Plus features an electronic switch that has been rated with a lifespan of over 50,000 on/off cycles. The switch is completely waterproof, dust proof and shock resistant.

Virtually Maintenance Free:
Thanks to the well thought out design, the XR8 Plus is virtually maintenance free. Advanced error sensing and thermal protection, an exceptionally rugged housing, the ultimate in heat dissipation technology and shock proof fan mounting make this ESC able to withstand anything a racer can throw at it.

High Performance Dynamic Timing Algorithm:
The XR8 is the worlds first competition level 1/8 scale ESC that has dynamic timing technology. This expands the adjustable power output range of the ESC while still maintaining system efficiency and smoothness.

Included Accessories:
Includes 10awg wire, and mounting hardware. Does not include programming box.

Specifications:
Scale: 1/8th
Brushed/Brushless: Brushless
Sensored: Yes
Waterproof: No
Cont./Peak Current: 150A/950A
Input: 2-6S LiPo/6-18 cells NiMh
BEC Output: Switch Mode 6V/7.4V, 6A
Input Wires: Red-10AWG-150mm*1/Black-10AWG-150mm*1
Output Wires: Black-12AWG-200mm*3
Input Connectors: No
Output Connectors: No
Fan Size: 30x30x10mm
Fan Voltage: 5-7.4V
Fan Power: Powered by BEC

Programming:
SET Button on ESC: Not Supported
LED Program Box: Not Supported
LCD Program Box: Supported
WiFi Module: Supported
Firmware Upgrade: Supported
Size: 58.7x48.0x36.9mm
Weight: 127g

Applications:
Motors: Sensorless amd Sensored Brushless motors
Vehicles: 1/8th Touring Car/Buggy/Truck Competitions
kV Rating: 4S LiPo, kV <3000/ 6S LiPo, kV < 2400

149.45€  Inc Tax
Hobbywing XeRun XR8 SCT Brushless ESC 140A 2-4S, 6A BEC (HW30113301)
Hobbywing XeRun XR8 SCT Brushless ESC 140A 2-4S, 6A BEC

Full-Sensored Mode Supported
The Hobbywing XR8 SCT is the first 1/8 scale competition ESC which can work the full-sensored mode at all times when paired with a Hobbywing matching motor. Perfect for 1/10 4WD Short Course Truck, Monster Trucks and of course 1/8th scale, the XR8 SCT ESC boasts full sensored operation, 140A output, electronic switch, 6V/7.4V switchable BEC and wireless programming capabilities.

Features:

Turbo Timing Technology:
Turbo timing technology is implemented by the XR8 SCT to unleash the maximum power of a HOBBYWING matching motor.

Small & Light Structure Design:
Small (30% smaller than XR8 Plus in size) and light (36.5g lighter than XR8 Plus in weight) structure design greatly simplifies the installation of the power system (esp. for vehicles like buggy and touring car with compact chassis).

Programming / Upgrading / Data reading wirelessly:
With Hobbywing's "WiFi Express" module and iPhone or an Android phone (with the HOBBYWING WiFi Link software installed), the user can remotely program parameters, upgrade firmware and check relevant data of the ESC without leaving the control stand.
*WiFi Module not included and sold separately: part# HWA30503000

Coasting:
The XR8 SCT provides an exceptionally smooth off-throttle coasting function, which simulates the feeling of inertia and momentum of a large-scale car driving experience. This can greatly improve the performance of builds utilizing large, high-powered motors as electromagnetic drag becomes a substantial factor in sudden deceleration when in the off-throttle position, adversely affecting driving performance and overall maneuvering.

Capacitor Thermal Protection:
Capacitor thermal protection implemented by the XR8 SCT will effectively prevent capacitors from exploding and causing irreversible damage to the ESC due to overload.

High Voltage Built-in BEC:
High voltage built-in BEC with an output current of up to 15 Amp and a switchable output voltage of 6V-7.4V allows users to use various high torque and high voltage servos.

High Reliability & Durability:
Built with the most rugged and high-quality components and coupled with cutting-edge firmware, the XR8 SCT is able to deliver unmatched power and performance for even the most hardcore of racing applications, but is also responsive enough to protect itself from damage due to overloading due to physical abuse, overuse or even human error.

Advanced and Secure Electronic Switch:
Electronic switch with a lifespan of over 50000 on/off cycles, housed in a completely waterproof, dust-proof and shock-resistant design.

Ultra-Reliable Cooling System:
HOBBYWING's patented cooling technology utilizes proprietary heat-conductive copper bars to rapidly and effectively transfer all internal heat from the MOSFET board to the integrated CNC machined billet aluminum heatsink housing. The cooling fan adopts a shockproof mounting which effectively reduces the possibility of fan damage due to vehicle’s frequent jumps.

Wide applicability:
This XR8 SCT ESC is not only applicable to 1/8th buggies and short-course trucks but also 1/10th short-course trucks, trucks and monster trucks.

Specifications:
Scale: 1/8th and 1/10th
Brushed/Brushless: Brushless
Sensored: Yes
Waterproof: No
Cont./Peak Current: 140A/880A
Input: 2-4S LiPo/6-12 cells NiMh
BEC Output: Switch Mode 6V/7.4V, 6A
Input Wires: Red-12AWG-200mm*1/Black-12AWG-200mm*1
Output Wires: Blue, Yellow, Orange -12AWG-200mm
Input Connectors: No
Output Connectors: No
Fan Size: 30x30x10mm
Fan Voltage: 5-7.4V
Fan Power: Powered by BEC

Programming:
SET Button on ESC: Not Supported
LED Program Box: Not Supported
LCD Program Box: Supported
WiFi Module: Supported
Firmware Upgrade: Supported
Size: 54.1x37.2x36.1mm
Weight: 90.5g

Applications:
Motors: Sensorless and Sensored Brushless motors
Vehicles: 1/10th SCT/Truck/Monster Truck and 1/8th Buggy/On-road Racing
kV Rating:
  • 2S LiPo: 3660 size motor, kV <6000
  • 3S LiPo: 3660 size motor, kV <4000
  • 4S LiPo: 3660 size motor, kV <3000
  • 4S LiPo: 4268 size motor, kV <2500 (Buggy)
  • 4S LiPo: 4268 size motor, kV <3200 (On-road)


104.92€  Inc Tax
Hobbywing XeRun XR10 PRO STOCK SPEC Brushless ESC 80A 2S, 3A BEC (HW30112401)
Hobbywing XeRun XR10 PRO STOCK SPEC Brushless ESC 80A 2S, 3A BEC

Special Design for STOCK Class Racing
Reliable hardware combined with great software (contains 5 common ready-to-use profiles) creates an ideal power solution to the STOCK class of 1/10 scale touring car, buggy racing.

Innovative Double-switch Design
A built-in electronic switch combined with an external detachable switch effectively helps the XR10 Stock Spec avoid some flaws of ordinary or one-switch ESCs. The internal switch makes the wiring convenient, the external switch is really handy when the car shell isinstalled on and the built-in switch is no longer touchable.

Programming/Upgrading/Data Reading Wirelessly
With Hobbywing's "WiFi Express" module and iPhone or an Android phone (with the HOBBYWING WiFi Link software installed), the user can remotely program parameters, upgrade firmware and check relevant data of the ESC without leaving the control stand.

Small Size & Light Weight
This ESC is smaller and lighter than the standard version XR10 Pro and it's the mini version of XR10 Pro 160A. The small size (31.5x25.6x16.1mm) makes the installation convenient and the light weight (only 28g w/o wires) provides more weight margin when adjusting the balance of the chassis.

Super Internal BEC
The built-in switch mode BEC with 3A (max. 6A) output and voltage adjustable between 6V and 7.4V allows the user to use various high voltage servos.

Adjustable Throttle & Brake PWM Frequencies
Independent and adjustable throttle & brake PWM frequencies guarantee precise and accurate throttle and brake control for all classes of competitions (esp. the Stock class).

Data-logging Capability
This ESC features the data-logging function which can record the maximum ESC & motor temperatures, the minimum battery voltage, the maximum motor RPM and etc. in real time and allows users to check those data via a LCD program box or WiFi module after each use.

Specifications:
Scale: 1/10th
Brushed/Brushless: Brushless
Sensored: Yes
Waterproof: No
Cont./Peak Current: 80A/380A
Input: 2S LiPo/5-7 cells NiMh
BEC Output: Switch Mode 6V/7.4V, 3A
Input Wires: Black-14AWG-200mm*2
Output Wires: Black-14AWG-200mm*3
Input Connectors: No
Output Connectors: No
Fan Size: 20x80x8mm
Fan Voltage: 5-7.4V
Fan Power: Powered by BEC

Programming:
SET Button on ESC: Not Supported
LED Program Box: Not Supported
LCD Program Box: Supported
WiFi Module: Supported
Firmware Upgrade: Supported
Size: 31.5x25.6x16.1mm
Weight: 54.5g

Applications:
Motors: Sensorless and Sensored Brushless motors
Vehicles: STOCK class of 1/10th Touring Car & Buggy Racing
kV Rating:
  • 1/10th Touring Cars >10.5 T
  • 1/10th Buggy >13.5 T


119.56€  Inc Tax
Hobbywing XeRun XR10 Pro G2 Brushless ESC 160A 2S, 5A BEC (black) (HW30112608)
Hobbywing XeRun XR10 Pro G2 Brushless ESC 160A 2S, 5A BEC

The XeRun XR10 Pro G2 ESC has a lots of new advanced features and a 32-bit high-performance processor making this the must have ESC! Reliable hardware combined with intelligent software (containing 10 common select-to-use profiles) creates an ideal power solution for 1/10th scale top touring car, pan car and buggy racing.

The aluminium casing and reticular heat sink combined with the HOBBYWING patented copper heat-conductive plates which are attached to the MOSFET board allows the internal heat to be quickly transferred to the heat sink for dissipation. With the high-performing detachable cooling fan, a highly reliable heat transfer system for maximum cooling is accomplished.

The XeRun XR10 Pro G2 ESC features a Battery Reverse Polarity Protection system, which has been designed with a very unique feature protecting your ESC from damage caused by Battery Reverse Polarity, so no matter how many times you reverse the battery connections the XR10 Pro G2 ESC, the paired motor and the battery are safe from damage.

It also has a more accurate Throttle PWM , Brake PWM adjustment, more options for Turbo Increase Rate and Turbo Decrease Rate and more options for "Maximum Brake Force" settings, 101%--150% (Active Brake)

The XeRun XR10 Pro G2 ESC features a data-logging function which can record the maximum ESC/motor temperature, RPM and etc. in real time and allows the user to analyse the recorded data via a the LCD program box or WiFi module after each use.

Specifications:
Scale: 1/10th
Brushed/Brushless: Brushless
Sensored: Yes
Waterproof: No
Cont./Peak Current: 160A/1200A
Input: 2S LiPo/5-6 cells NiMh
BEC Output: Switch Mode 5-7.4V, 5A
Input Wires: Black-12AWG-200mm*2
Output Wires: Black-12AWG-200mm*3
Input Connectors: No
Output Connectors: No

Programming:
SET Button on ESC: Not Supported
LED Program Box: Not Supported
LCD Program Box: Supported
WiFi Module: Supported
Firmware Upgrade: Supported
Size: 37.5x30.9x32.5mm (with fan)
Weight: 95g

Applications:
Motors: Sensorless and Sensored Brushless motors
Vehicles: 1/10th & 1/8th Touring Cars & Buggies for Racing
kV Rating:
  • 2S LiPo: 1/10th Touring Cars >4.5 T
  • 2S LiPo: 1/10th Buggy >5.5 T (3650 size motors)


219.60€  Inc Tax
Per Page      1 - 30 of 35