Servos

Sort By:  
Power HD HD-1900MG Analog Servo 1.5kg/cm 6V (HD-1900MG)
Power HD HD-1900MG metal gear servo is suitable for most RC applications

Features:
- High torque up to 1.5 kg/cm at 6 V
- DC motor, metal gear, small size and lightweight
 
Specifications:
Brand: Power HD
Model: HD-1900MG 
Torque (4.8V): 1.2 kg
Torque (6.0 V): 1.5 kg
Speed: 0.11 sec (4.8 V) / 0.08 sec (6.0 V)
Operating voltage: 4.8 ~ 6.0 DC volts.
Weight: 13.0 g
Bearing type: no
Motor type: DC motor
Gear type: copper
Operating temperature: -20℃~60C
Working frequency: 1520μs / 50hz
Main body size of servo: 23.0 x 12.2 x 29mm

9.76€  Inc Tax
Savöx SH-0350 Digital Servo 2.6kg/cm 6V (1SV2102)
Savox SH-0350 Digital Servo

Digital DC Motor Servo, Composite Gear

Features:
- Leading edge digital servo technology
- Strong 3-Pole Brushed motor
- Accurate and fast response
- Fine resolution
- Aluminium center case for improved motor cooling and total strength
- Ball bearing
- Precision composite gears

Technical specifications:
Servo Technology: Digital Low Voltage
Input Voltage (V): 4.8V - 6.0V
Servo Type / Size: Micro
Motor Type: Brushed 3-Pole Motor
Gear Material: Composite gears
Bearing: Ball bearing
Servo Case: Aluminium - Composite
Speed 60°/sec @ 6.0V: 0.16 sec/60°
Torque kg/cm @ 6.0V: 2.6 Kg/cm
Length: 22.8mm
Width: 12.0mm
Height: 25.4mm
Weight: 12.3g
Connector type: JR
Spline size: 21T spline

14.64€  Inc Tax
Savöx SH-0255MG Digital Servo 3.9kg/cm 6V (1SV2110)
Savox SH-0255MG Digital Servo

Digital DC Motor Servo, Metal Gear

Features:
- Leading edge digital servo technology
- Strong 3-Pole Brushed motor
- Accurate and fast response
- Fine resolution
- Aluminium center case for improved motor cooling and total strength
- Ball bearing
- Precision metal gears

Technical specifications:
Servo Technology: Digital Low Voltage
Input Voltage (V): 4.8V - 6.0V
Servo Type / Size: Micro
Motor Type: Brushed 3-Pole Motor
Gear Material: Metal gears
Bearing: Ball bearing
Servo Case: Aluminium - Composite
Speed 60°/sec @ 6.0V: 0.13 sec/60°
Torque kg/cm @ 6.0V: 3.9 Kg/cm
Length: 22.8mm
Width: 12.0mm
Height: 29.4mm
Weight: 15.8g
Connector type: JR
Spline size: 21T spline

19.52€  Inc Tax
Savöx SG-0351 Digital Servo 4.1kg/cm (6.0V) (1SV2308)
Savox SG-0351 Digital Servo

Digital DC Motor Servo, Composite Gear

Features:
- Leading edge digital servo technology
- Strong 3-Pole Brushed motor
- Accurate and fast response
- Fine resolution
- Composite case
- Ball bearing
- Precision composite gears

Technical specifications:
Servo Technology: Digital Low Voltage
Input Voltage (V): 4.8V - 6.0V
Servo Type / Size: Standard
Motor Type: Brushed 3-Pole Motor
Gear Material: Composite gears
Bearing: Ball bearing
Servo Case: Composite
Speed 60°/sec @ 6.0V: 0.17 sec/60°
Torque kg/cm @ 6.0V: 4.1 Kg/cm
Length: 40.7mm
Width: 20.0mm
Height: 37.0mm
Weight: 41 g
Connector type: JR
Spline size: 25T spline


14.64€  Inc Tax
Hitec DPC-11 Universal Programming Interface (Dongle) (1HI33012)
Hitec DPC-11 PC program interface for all Hitec programmable servos

Dongle for PC Programmer (servo programmer)

15.86€  Inc Tax
Hitec HS-225MG Mighty Mini Analog Servo 4.8kg/cm 6V (1HI3060)
Hitec HS-225MG MIGHTY MINI ball bearing metal gear servo

Product Description
The analog HS-225MG represents a good value with performance that rivals other larger and more expensive servos. Ideal for applications that call for a small, lightweight, high speed, high torque servo, the HS-225MG high performance mini servo features a top ball bearing and is built with state-of-the-art SMT technology.

Features:
Full Size Performance in a Mini Package
Durable Metal Gears
Top Ball Bearings

Perfect for Applications Requiring a Small, Lightweight, High Speed, High Torque Servo

Specifications:
Operating Voltage Range (Volts DC): 4.8V ~ 6.0V
Speed (Second @ 60°): 0.14 ~ 0.11
Maximum Torque Range kg/cm: 3.9 ~ 4.8
Current Draw at Idle: 8 mA
No Load Operating Current Draw: 300 mA
Stall Current Draw: 1200 mA
Dead Band Width: 8 µs

Physical Specifications:
Dimensions (mm): 32.4 x 16.8 x 31.0
Weight (g): 31.0
Circuit Type: HT7003 Analog SMT
Motor Type: 3 Pole Metal Brush Ferrite
Gear Material: Metal Gear
Bearing Type: Top Ball Bearing
Output Shaft (type / Ømm): Standard 24
Case Material: Plastic
Dust/Water Resistance: N / A

25.62€  Inc Tax
Hitec HS-225BB Analog Servo 4.8kg/cm 6V (1HI3055)
Hitec HS-225BB Servo

Product Description
The analog HS-225BB represents a good value with performance that rivals other larger and more expensive servos. Ideal for applications that call for a small, lightweight, high speed, high torque servo, the HS-225BB high performance mini servo features a top ball bearing and is built with state-of-the-art SMT technology.

Features:
Standard size performance in a mini Package
Durable Nylon Gears
Top Ball Bearings

Perfect for Applications Requiring a Small, Lightweight, High Speed, High Torque Servo

Accessories:
Nylon Gear Set
Plastic Case Set
Applicable Horns

Specifications:
Operating Voltage Range (Volts DC): 4.8V ~ 6.0V
Speed (Second @ 60°): 0.14 ~ 0.11
Maximum Torque Range kg/cm: 3.9 ~ 4.8
Current Draw at Idle: 8 mA
No Load Operating Current Draw: 300 mA
Stall Current Draw: 1200 mA
Dead Band Width: 8 µs

Physical Specifications:
Dimensions (mm): 32.4 x 16.8 x 31.0
Weight (g): 27.0
Circuit Type: HT7003 Analog SMT
Motor Type: 3 Pole Metal Brush Ferrite
Gear Material: Nylon
Bearing Type: Top Ball Bearing
Output Shaft (type / Ømm): Standard 24
Case Material: Plastic
Dust/Water Resistance: N / A

18.91€  Inc Tax
Servo KST X12-508 HV 6.2kg/cm (8.4V) (KST-0201)

KST X12-508 HV Digital Coreless Servo Motor (metal gear)

The KST X12-508 HV Brushless servo offers a significantly longer life-span, with a superior power to weight ratio. The servo features a nicely machined aluminium case and offerers high voltage capability. It can be run directly from a 2S LiPo battery without the need for a separate voltage regulator.

Another great benefit of X12 servos is the all new design of a circuit board that generates no counter EMF in any working conditions. It eliminates any possible interference with your flybarless system or receiver unit thus as a result giving you only the best in-flight performance.

Due to the extreme reliability and performance this servos are used in film and motion picture industry as well as in robotics, drones, UAV, UAS, academic researches, and other highly demanding applications such as use in various military projects,..


Technical Details:
Voltage (max.) [V]: 8.4

Torque [kg/cm]@6.0V: 4.2
Torque [kg/cm]@7.4V: 5.2
Torque [kg/cm]@8.4V: 6.2

Speed [s/60°]@6.0V: 0.09
Speed [s/60°]@7.4V: 0.08
Speed [s/60°]@8.4V: 0.07

Width [mm]: 12.0
Length [mm]: 23.0
Height [mm]: 27.5

Weight [g]: 20.0

Motor typ: Coreless
Working Frequency: 1520us/333Hz, 900us-2100us
Resolution: <2us
Gear: Metal Gear
Ball Bearing: 2BB
Output shaft type: 25T
Servo size: Micro
Waterproof: No
Manufacturer: KST


Suitable for Swashplate use on 250-470 size RC helicopters;

Such as Oxy 3, Goblin 280 Fireball, 380, 420, T-REX 250, 300, 450, 470, MSH PROTOS 380, and similars,..

39.04€  Inc Tax
G.T. Power Servo Tester (1GT0109)
G.T. Power 3 Mode CCPM Servo and ESC Consistency Tester

This portable device allows you to test the functionality of your servos and ESC without having to connect your radio, receiver and battery. Servos testers also allow you to easily center your servos when attaching servo horns and making control surface adjustments.

Features:
Three modes to check ESC or Servos:
Manual: Turn the knob with different speed and check the response time
Neutral: Test the center point of your servo
Automatic: Make the servo swing automatically to the greatest angle

Connect up to three servos at one time
Connect up to three ESCs at one time to test response time

Specification:
49x29x43mm
Input Voltage: 4.8-6V

10.98€  Inc Tax
Power HD HD-1440A Analog Servo 0.8kg/cm 6V (HD-1440A)
Power HD HD-1440A

The tiny sport micro servo 4.4g stands at the ready to bring reliable control to your next micro airplane project. Weighing in at a mere 4.4g, features analog control, coreless motor, nylon gear train and nice assortment of control horns.

Specifications:
Brand: Power HD
Servo Type: Analog
Motor Type: Coreless
Gear Type: Nylon
Stall Torque: 0.6kg/cm @ 4.8V | 0.8kg/cm @ 6.0V
Speed: 0.12 sec (4.8V) │ 0.10 sec (6.0V)
Dimensions: 20.2x8.5x20.2mm
Weight: 4.4g
Operating Voltage: 4.8 – 6.0V

5.49€  Inc Tax
Power HD DSM44 Digital Servo 1.6kg/cm 6V (HD-DSM44)
The Power HD DSM44 digital servo is a micro servo with digital control electronics and metal gears. Servo horns and associated hardware are included.
 
Specs:
Torque(4.8V): 1.2 kg/cm
Torque(6.0V): 1.6 kg/cm
Speed: 0.09 sec (4.8V) / 0.07 sec (6.0V)
Operating Voltage: 4.8 ~ 6.0 DC Volts
Weight: 5.9g
Gear Type: Metal
Controller: Digital
Operating Temperature: -10℃~50℃
Size: 22x8.7x27mm
Spline: 25

14.03€  Inc Tax
Power HD 1812MG Digital Waterproof 18kg/cm (6.0V) (HD-1812MG)
Power HD 1812MG waterproof digital servo

Power HD introduced their new 1812MG waterproof standard-size servo that is ideal to upgrade RTR (ready-to-run) kits and more. The servo utilizes a new generation high-frequency control module that eliminates the squeaky noises commonly associated with digital servos. Other features include dual ball bearings, a 25T output spline, and a blue color outer case.

Specifications:
Torque (4.8V): 16.0 kg-cm
Torque (6.0V): 18.0 kg-cm
Speed (4.8V): 0.14s
Speed (6.0V): 0.12s
Operating Voltage: 4.8 ~ 6.0 DC Volts
Weight: 56.0 g (1.98 oz)
Bearing Type: Dual ball bearing
Motor Type: DC motor
Gear Type: Copper & aluminium
Size: 40.7×20.5×39.5mm

24.40€  Inc Tax
Hitec HS-311 Analog Servo 3.5kg/cm 6V (1HI3063)
The HS-311 sport servo provides the novice modeler all the performance and reliability you would expect to find in a more expensive servos. Combined with precise resin gears and SMT circuitry, the HS-311 represents a remarkable value in today's R/C market.

Features:
Reliable three-pole ferrite motor
Durable nylon gears
Top resin bushing
Long life potentiometer

Specifications:
Operating Voltage Range: 4.8V-6.0V
Speed: 0.19-0.15s (@ 60°)
Maximum Torque Range: 3.0-3.5kg/cm
Current Draw at Idle 7.7 mA
No Load Operating Current Draw 180 mA
Stall Current Draw 800 mA
Dead Band Width 5 µs

Physical Specifications:

Dimensions: 40.0 x 20.0 x 36.5mm
Weight: 43.0g
Motor Type: 3 Pole Metal Brush Ferrite
Gear Material: Nylon
Bearing Type: None
Output Shaft: 24t
Case Material: Plastic

12.81€  Inc Tax
Align DS455M Digital Servo (HSD45501)
Suitable for T-Rex 250/450 rudder use
• Faster speed with high torque performance, allowing helicopter to perform with faster and higher precision.
• High rigidity, shock resistant metal gears with high strength composite alloy gears with durable structure characteristics.
• Aluminum alloy mid case construction for instantaneous heat dissipation, maintaining servos high efficiency.
• Supports digital and analog control signal.
• Powerful and precise servo.
• Supports 8.4V high voltage input to provide optimal speed and torque performance of the servo.

Specifications
Stall torque: 2.2kg/cm (6.0V), 2.9kg/cm (8.4V)
Motion speed (60°): 0.05sec (6.0V), 0.04sec (8.4V)
Rating voltage: DC 6.0V - 8.4V
Temperature range: -20°C ~ +60°C
Dimensions: 23x12x31.3mm
Weight: 20g

Content
• 1x DS455M Digital Servo
• 2x Socket Button Head Self Tapping Screw
• 1x Socket Screw
• 2x Servo Arm


39.65€  Inc Tax
Servo KST BLS815 V2 HV 20kg/cm (8.4V) (KSTBLS815V2)

KST BLS815 V2 Digital Brushless Servo (metal gear)


Technical Details:
Voltage (max.) [V]: 8.4

Torque [kg/cm]@6.0V: 14.0
Torque [kg/cm]@7.4V: 17.0
Torque [kg/cm]@8.4V: 20.0

Speed [s/60°]@6.0V: 0.09
Speed [s/60°]@7.4V: 0.08
Speed [s/60°]@8.4V: 0.07

Width [mm]: 20.0
Length [mm]: 40.5
Height [mm]: 38.0

Weight [g]: 73.0

Motor typ: Brushless
Working Frequency: 1520us/333Hz, 900us-2100us
Gear: MG
Ball Bearing: 2BB
Output shaft type: 25T
Servo size: Standard
Waterproof: No
Manufacturer: KST


Suitable for use as a swashplate servo on 550 600 size RC helicopters;

Such as Goblin 570, 630, 650, 700, 770, T-REX 550, 600, 700, Mikado LOGO 550, 600, 700, 800, MSH PROTOS 700 MAX, SOXOS 550, 600, 700 and similar,.. 


74.42€  Inc Tax
Servo KST BLS805X HV 7.5kg/cm (8.4V) 760us (KSTBLS805X)

KST BLS805X HV Digital Brushless Tail Servo (metal gear)


Technical Details:
Voltage (max.) [V]: 8.4

Torque [kg/cm]@6.0V: 5.5
Torque [kg/cm]@7.4V: 6.5
Torque [kg/cm]@8.4V: 7.5

Speed [s/60°]@6.0V: 0.048
Speed [s/60°]@7.4V: 0.042
Speed [s/60°]@8.4V: 0.039

Width [mm]: 20.0
Length [mm]: 40.5
Height [mm]: 37.0

Weight [g]: 70.0

Motor typ: Brushless
Working Frequency: 760us/560Hz
Gear: MG
Ball Bearing: 2BB
Output shaft type: 25T
Servo type: Standard
Waterproof: No
Manufacturer: KST


Suitable for use as a tail servo on 550 600 size RC helicopters;

Such as Goblin 570, 630, 650, 700, 770, Kraken, T-REX 550, 600, 700, Mikado LOGO 550, 600, 700, 800, MSH PROTOS 700 MAX, SOXOS 550, 600, 700 and similar,..


75.03€  Inc Tax
Servo KST BLS915 V2 HV 25kg/cm (8.4V) (KSTBLS915V2)

KST BLS915 V2.0 Digital Brushless Motor Servo (metal gear)


Technical Details:
Voltage (max.) [V]: 8.4

Torque [kg/cm]@6.0V: 18.0
Torque [kg/cm]@7.4V: 22.0
Torque [kg/cm]@8.4V: 25.0

Speed [s/60°]@6.0V: 0.09
Speed [s/60°]@7.4V: 0.08
Speed [s/60°]@8.4V: 0.07

Width [mm]: 20.0
Length [mm]: 40.5
Height [mm]: 38.0

Weight [g]: 78.0

Motor typ: Brushless
Working Frequency: 1520us/333Hz, 900us-2100us
Resolution: <2us
Gear: Hardened steel
Ball Bearing: 2BB
Output shaft type: 25T
Servo size: Standard
Waterproof: No
Manufacturer: KST


Suitable for use as a swashplate servo on 550-700 size RC helicopters;

Such as Goblin 570, 630, 650, 700, 770, T-REX 550, 600, 700, Mikado LOGO 550, 600, 700, 800, MSH PROTOS 700 MAX, SOXOS 550, 600, 700 and similar,..


89.67€  Inc Tax
Servo KST BLS905X HV 8kg/cm (8.4V) 760us (KSTBLS905X)

KST BLS905X HV Digital Brushless Tail Servo (metal gear)


Technical Details:
Voltage (max.) [V]: 8.4

Torque [kg/cm]@6.0V: 6.0
Torque [kg/cm]@7.4V: 7.0
Torque [kg/cm]@8.4V: 8.0

Speed [s/60°]@6.0V: 0.045
Speed [s/60°]@7.4V: 0.040
Speed [s/60°]@8.4V: 0.035

Width [mm]: 20.0
Length [mm]: 40.5
Height [mm]: 38.0

Weight [g]: 72.0

Motor typ: Brushless
Working Frequency: 760us/560Hz
Gear: MG
Ball Bearing: 2BB
Output shaft type: 25T
Servo type: Standard
Waterproof: No
Manufacturer: KST


Suitable for use as a tail servo on 550-700 size RC helicopters;

Such as Goblin 570, 630, 650, 700, 770, Kraken, T-REX 550, 600, 700, Mikado LOGO 550, 600, 700, 800, MSH PROTOS 700 MAX, SOXOS 550, 600, 700 and similar,..


91.50€  Inc Tax
Servo KST X20-2208 v2 HV 25kg/cm (8.4V) (KSTX20-2208V2)

KST X20-2208 v2.0 HV Digital Brushless Servo Motor (titanium gear)

The KST X20-2208 v2 HV Brushless servo offers a significantly longer life-span, with a superior power to weight ratio. The servo features a nicely machined aluminium case and offerers high voltage capability. It can be run directly from a 2S LiPo battery without the need for a separate voltage regulator.

Another huge benefit of X20 servos is the all new design of a circuit board that generates no counter EMF in any working conditions. It eliminates any possible interference with your flybarless system or receiver unit thus as a result giving you only the best in-flight performance.

Due to the extreme reliability and performance these servos are used in film and motion picture industry as well as in robotics, drones, UAV, UAS, academic researches, and other highly demanding applications such as use in various military applications,..

In addition to the four heavy duty plastic servo arms it comes with the two anodised aluminium servo horns with M2 threaded holes and with the one gear-saver insert.

Technical Details:
Voltage (max.) [V]: 8.4

Torque [kg/cm]@6.0V: 18.0
Torque [kg/cm]@7.4V: 22.0
Torque [kg/cm]@8.4V: 25.0

Speed [s/60°]@6.0V: 0.09
Speed [s/60°]@7.4V: 0.08
Speed [s/60°]@8.4V: 0.07

Width [mm]: 20.0
Length [mm]: 40.5
Height [mm]: 38.0

Weight [g]: 72.0

Motor typ: Brushless
Working Frequency: 1520us/333Hz, 900us-2100us
Resolution: <2us
Gear: Titanium Alloy
Ball Bearing: 2BB
Output shaft type: 25T
Servo size: Standard
Waterproof: No
Manufacturer: KST


Suitable for use as a swashplate servo on 550-800 size RC helicopters;

Such as Goblin 570, 630, 650, 700, 770, T-REX 550, 600, 700, Mikado LOGO 550, 600, 700, 800, MSH PROTOS 700 MAX, SOXOS 550, 600, 700 and similar,..


149.45€  Inc Tax
Servo KST X20-1035 v2 HV 12kg/cm (8.4V) 760us (KSTX20-1035V2)

KST X20-1035 v2.0 HV Digital Brushless Servo Motor (titanium gear)

The KST X20-1035 v2 HV Brushless servo offers a significantly longer life-span, with a superior power to weight ratio. The servo features a nicely machined aluminium case and offerers high voltage capability. It can be run directly from a 2S LiPo battery without the need for a separate voltage regulator.

Another huge benefit of X20 servos is the all new design of a circuit board that generates no counter EMF in any working conditions. It eliminates any possible interference with your flybarless system or receiver unit thus as a result giving you only the best in-flight performance.

Due to the extreme reliability and performance these servos are used in film and motion picture industry as well as in robotics, drones, UAV, UAS, academic researches, and other highly demanding applications such as use in various military applications,..

In addition to the four heavy duty plastic servo arms it comes with the two anodised aluminium servo horns with M2 threaded holes and with the one gear-saver insert.

Technical Details:
Voltage (max.) [V]: 8.4

Torque [kg/cm]@6.0V: 8.5
Torque [kg/cm]@7.4V: 10.3
Torque [kg/cm]@8.4V: 12.0

Speed [s/60°]@6.0V: 0.04
Speed [s/60°]@7.4V: 0.035
Speed [s/60°]@8.4V: 0.03

Width [mm]: 20.0
Length [mm]: 40.5
Height [mm]: 38.0

Weight [g]: 72.0

Motor typ: Brushless
Working Frequency: 760us/560Hz, 450us-1050us
Resolution: <2us
Gear: Titanium Alloy
Ball Bearing: 2BB
Output shaft type: 25T
Servo size: Standard
Waterproof: No
Manufacturer: KST


Suitable for use as a tail servo on 550-800 size RC helicopters;

Such as Goblin 570, 630, 650, 700, 770, T-REX 550, 600, 700, Mikado LOGO 550, 600, 700, 800, MSH PROTOS 700 MAX, SOXOS 550, 600, 700 and similar,..


159.21€  Inc Tax
Servo KST X20-3612 HV 40kg/cm (8.4V) - Big Scale/JET (KSTX20-3612)

KST X20-3612 HV Digital Brushless Servo Motor (metal gear)

The KST X20-3612 HV Brushless servo offers a significantly longer life-span, with a superior power to weight ratio. The servo features a nicely machined aluminium case and offerers high voltage capability. It can be run directly from a 2S LiPo battery without the need for a separate voltage regulator.

Another huge benefit of X20 servos is the all new design of a circuit board that generates no counter EMF in any working conditions. That eliminates any possible interference with your electronics system and receiver unit thus as a result giving you only the best in-flight performance.

Due to the extreme reliability and performance with very fast positioning times and perfect accuracy these servos are used in Big Scale and RC Jet models as well as in film and motion picture industry in robotics, drones, UAV, UAS, academic researches, and other highly demanding applications such as use in various military projects,..


KST = Fast, powerful and reliable!


Features
- Brushless motor
- Metal gear
- Dual ball bearing
- Relatively low weight


Technical Details:
Voltage (max.) [V]: 8.4

Torque [kg/cm]@6.0V: 28.0
Torque [kg/cm]@7.4V: 36.0
Torque [kg/cm]@8.4V: 40.0

Speed [s/60°]@6.0V: 0.15
Speed [s/60°]@7.4V: 0.12
Speed [s/60°]@8.4V: 0.11

Width [mm]: 20.0
Length [mm]: 40.5
Height [mm]: 42.0

Weight [g]: 78.0

Motor typ: Brushless
Working Frequency: 1520us/333Hz, 900us-2100us
Resolution: <2us
Gear: MG
Ball Bearing: 2BB
Output shaft type: 25T
Servo size: Standard
Waterproof: No
Manufacturer: KST



89.67€  Inc Tax
Servo KST A20-3813 HV 43kg/cm (8.4V) - Big Scale/JET (KSTA20-3813)

KST A20-3813 HV Digital Brushless Servo Motor (Phosphor Bronze + Hardened Steel Gears)

The KST A20-3813 HV Brushless servo offers a significantly longer life-span, with a superior power to weight ratio. The servo features a nicely machined aluminium case for superior cooling and offerers high voltage capability. It can be run directly from a 2S LiPo battery without the need for a separate voltage regulator.

Built-in anti-lock circuit prevents the electronics from burning out if a linkage or control surface becomes locked (Servo tested locked after 5 minutes in perfect working condition).

Another huge benefit of A20 servos is the all new design of a circuit board that generates no counter EMF in any working conditions. That eliminates any possible interference with your electronics system and receiver unit thus as a result giving you only the best in-flight performance (servo tested for 10 hours continuous operation without any interference).

Due to the extreme reliability and performance with very fast positioning times and perfect accuracy these servos are used in Big Scale and RC Jet models as well as in film and motion picture industry in robotics, drones, UAV, UAS, academic researches, and other highly demanding applications such as use in various military projects,..


KST = Fast, powerful and reliable!


Features
- Brushless motor
- Phosphor Bronze + Hardened Steel Gears
- Dual ball bearing
- Relatively low weight


Technical Details:
Voltage (max.) [V]: 8.4

Torque [kg/cm]@6.0V: 30.0
Torque [kg/cm]@7.4V: 38.0
Torque [kg/cm]@8.4V: 43.0

Speed [s/60°]@6.0V: 0.15
Speed [s/60°]@7.4V: 0.13
Speed [s/60°]@8.4V: 0.12

Width [mm]: 20.0
Length [mm]: 40.5
Height [mm]: 38.0

Weight [g]: 72.0

Motor typ: Brushless
Working Frequency: 1520us/333Hz, 900us-2100us
Resolution: <2us
Gear: Phosphor Bronze + Hardened Steel Gear
Ball Bearing: 2BB
Output shaft type: 25T
Servo size: Standard
Waterproof: No
Manufacturer: KST



99.43€  Inc Tax
Servo KST A20-4515 HV 50kg/cm (8.4V) - Big Scale/JET (KSTA20-4515)

KST A20-4515 HV Digital Brushless Servo Motor (Phosphor Bronze + Hardened Steel Gears)

The KST A20-4515 HV Brushless servo offers a significantly longer life-span, with a superior power to weight ratio. The servo features a nicely machined aluminium case for superior cooling and offerers high voltage capability. It can be run directly from a 2S LiPo battery without the need for a separate voltage regulator.

Built-in anti-lock circuit prevents the electronics from burning out if a linkage or control surface becomes locked (Servo tested locked after 5 minutes in perfect working condition).

Another huge benefit of A20 servos is the all new design of a circuit board that generates no counter EMF in any working conditions. That eliminates any possible interference with your electronics system and receiver unit thus as a result giving you only the best in-flight performance (servo tested for 10 hours continuous operation without any interference).

Due to the extreme reliability and performance with very fast positioning times and perfect accuracy these servos are used in Big Scale and RC Jet models as well as in film and motion picture industry in robotics, drones, UAV, UAS, academic researches, and other highly demanding applications such as use in various military projects,..

KST = Fast, powerful and reliable!

Features
- Brushless motor
- Phosphor Bronze + Hardened Steel Gears
- Dual ball bearing
- Relatively low weight


Technical Details:
Voltage (max.) [V]: 8.4

Torque [kg/cm]@6.0V: 36.0
Torque [kg/cm]@7.4V: 45.0
Torque [kg/cm]@8.4V: 50.0

Speed [s/60°]@6.0V: 0.19
Speed [s/60°]@7.4V: 0.15
Speed [s/60°]@8.4V: 0.13

Width [mm]: 20.0
Length [mm]: 40.5
Height [mm]: 42.0

Weight [g]: 80.0

Motor typ: Brushless
Working Frequency: 1520us/333Hz, 900us-2100us
Resolution: <2us
Gear: Phosphor Bronze + Hardened Steel Gear
Ball Bearing: 2BB
Output shaft type: 25T
Servo size: Standard
Waterproof: No
Manufacturer: KST

109.80€  Inc Tax
KST Servo Combo 3x X20-2208 v2 + 1x X20-1035 v2 (8.4V) (KSTX20-V2COMBO)

3x KST X20-2208 v2.0 HV Digital Brushless Servo Motor (titanium gear)

The KST X20-2208 v2 HV Brushless servo offers a significantly longer life-span, with a superior power to weight ratio. The servo features a nicely machined aluminium case and offerers high voltage capability. It can be run directly from a 2S LiPo battery without the need for a separate voltage regulator.

Another huge benefit of X20 servos is the all new design of a circuit board that generates no counter EMF in any working conditions. It eliminates any possible interference with your flybarless system or receiver unit thus as a result giving you only the best in-flight performance.

Due to the extreme reliability and performance these servos are used in film and motion picture industry as well as in robotics, drones, UAV, UAS, academic researches, and other highly demanding applications such as use in various military applications,..

In addition to the four heavy duty plastic servo arms it comes with the two anodised aluminium servo horns with M2 threaded holes and with the one gear-saver insert.

Technical Details:
Voltage (max.) [V]: 8.4

Torque [kg/cm]@6.0V: 18.0
Torque [kg/cm]@7.4V: 22.0
Torque [kg/cm]@8.4V: 25.0

Speed [s/60°]@6.0V: 0.09
Speed [s/60°]@7.4V: 0.08
Speed [s/60°]@8.4V: 0.07

Width [mm]: 20.0
Length [mm]: 40.5
Height [mm]: 38.0

Weight [g]: 72.0

Motor typ: Brushless
Working Frequency: 1520us/333Hz, 900us-2100us
Resolution: <2us
Gear: Titanium Alloy
Ball Bearing: 2BB
Output shaft type: 25T
Servo size: Standard
Waterproof: No
Manufacturer: KST


Suitable for use as a swashplate servo on 550-800 size RC helicopters;

Such as Goblin 570, 630, 650, 700, 770, T-REX 550, 600, 700, Mikado LOGO 550, 600, 700, 800, MSH PROTOS 700 MAX, SOXOS 550, 600, 700 and similar,..


1x KST X20-1035 v2.0 HV Digital Brushless Servo Motor (titanium gear)

The KST X20-1035 v2 HV Brushless servo offers a significantly longer life-span, with a superior power to weight ratio. The servo features a nicely machined aluminium case and offerers high voltage capability. It can be run directly from a 2S LiPo battery without the need for a separate voltage regulator.

Another huge benefit of X20 servos is the all new design of a circuit board that generates no counter EMF in any working conditions. It eliminates any possible interference with your flybarless system or receiver unit thus as a result giving you only the best in-flight performance.

Due to the extreme reliability and performance these servos are used in film and motion picture industry as well as in robotics, drones, UAV, UAS, academic researches, and other highly demanding applications such as use in various military applications,..

In addition to the four heavy duty plastic servo arms it comes with the two anodised aluminium servo horns with M2 threaded holes and with the one gear-saver insert.

Technical Details:
Voltage (max.) [V]: 8.4

Torque [kg/cm]@6.0V: 8.5
Torque [kg/cm]@7.4V: 10.3
Torque [kg/cm]@8.4V: 12.0

Speed [s/60°]@6.0V: 0.04
Speed [s/60°]@7.4V: 0.035
Speed [s/60°]@8.4V: 0.03

Width [mm]: 20.0
Length [mm]: 40.5
Height [mm]: 38.0

Weight [g]: 72.0

Motor typ: Brushless
Working Frequency: 760us/560Hz, 450us-1050us
Resolution: <2us
Gear: Titanium Alloy
Ball Bearing: 2BB
Output shaft type: 25T
Servo size: Standard
Waterproof: No
Manufacturer: KST


Suitable for use as a tail servo on 550-800 size RC helicopters;

Such as Goblin 570, 630, 650, 700, 770, T-REX 550, 600, 700, Mikado LOGO 550, 600, 700, 800, MSH PROTOS 700 MAX, SOXOS 550, 600, 700 and similar,..

598.41€  Inc Tax
Servo KST X15-908 HV 9.2kg/cm (8.4V) (KST-0303)

KST X15-908 HV Digital Coreless Servo Motor (metal gear)

The KST X15-908 HV Brushless servo offers a significantly longer life-span, with a superior power to weight ratio. The servo features a nicely machined aluminium case and offerers high voltage capability. It can be run directly from a 2S LiPo battery without the need for a separate voltage regulator.

Another great benefit of X15 servos is the all new design of a circuit board that generates no counter EMF in any working conditions. It eliminates any possible interference with your flybarless system or receiver unit thus as a result giving you only the best in-flight performance.

Due to the extreme reliability and performance this servos are used in film and motion picture industry as well as in robotics, drones, UAV, UAS, academic researches, and other highly demanding applications such as use in various military projects,..


Technical Details:
Voltage (max.) [V]: 8.4

Torque [kg/cm]@6.0V: 6.5
Torque [kg/cm]@7.4V: 8.0
Torque [kg/cm]@8.4V: 9.2

Speed [s/60°]@6.0V: 0.10
Speed [s/60°]@7.4V: 0.09
Speed [s/60°]@8.4V: 0.08

Width [mm]: 15.0
Length [mm]: 35.5
Height [mm]: 32.5

Weight [g]: 40.0

Motor typ: Coreless
Working Frequency: 1520us/333Hz, 900us-2100us
Resolution: <2us
Gear: Hardened Steel
Ball Bearing: 2BB
Output shaft type: 25T
Servo size: Mini
Waterproof: No
Manufacturer: KST


Suitable for Swashplate use on 420-580 size RC helicopters;

Such as Goblin 420, 500, KRAKEN 580, T-REX 500, Mikado LOGO 480, 500, OXY 5, and similar,..


65.88€  Inc Tax
Servo KST X15-1208 HV 13.5kg/cm (8.4V) (KST-0301)

KST X15-1208 HV Digital Coreless Servo Motor (metal gear)

The KST X15-1208 HV Brushless servo offers a significantly longer life-span, with a superior power to weight ratio. The servo features a nicely machined aluminium case and offerers high voltage capability. It can be run directly from a 2S LiPo battery without the need for a separate voltage regulator.

Another great benefit of X15 servos is the all new design of a circuit board that generates no counter EMF in any working conditions. It eliminates any possible interference with your flybarless system or receiver unit thus as a result giving you only the best in-flight performance.

Due to the extreme reliability and performance this servos are used in film and motion picture industry as well as in robotics, drones, UAV, UAS, academic researches, and other highly demanding applications such as use in various military projects,..


Technical Details:
Voltage (max.) [V]: 8.4

Torque [kg/cm]@6.0V: 9.8
Torque [kg/cm]@7.4V: 12.0
Torque [kg/cm]@8.4V: 13.5

Speed [s/60°]@6.0V: 0.10
Speed [s/60°]@7.4V: 0.08
Speed [s/60°]@8.4V: 0.07

Width [mm]: 15.0
Length [mm]: 35.5
Height [mm]: 32.5

Weight [g]: 40.0

Motor typ: Coreless
Working Frequency: 1520us/333Hz, 900us-2100us
Resolution: <2us
Gear: Metal Gear
Ball Bearing: 2BB
Output shaft type: 25T
Servo size: Mini
Waterproof: No
Manufacturer: KST


Suitable for Swashplate use on 420-580 size RC helicopters;

Such as Goblin 420, 500, KRAKEN 580, T-REX 500, Mikado LOGO 480, 500, OXY 5, and similar,..


76.86€  Inc Tax
Servo KST X15-755X HV 10.2kg/cm (8.4V) 760us (KST-0302)

KST X15-755X HV Digital Coreless Servo Motor (metal gear)

The KST X15-755X HV Brushless servo offers a significantly longer life-span, with a superior power to weight ratio. The servo features a nicely machined aluminium case and offerers high voltage capability. It can be run directly from a 2S LiPo battery without the need for a separate voltage regulator.

Another great benefit of X15 servos is the all new design of a circuit board that generates no counter EMF in any working conditions. It eliminates any possible interference with your flybarless system or receiver unit thus as a result giving you only the best in-flight performance.

Due to the extreme reliability and performance this servos are used in film and motion picture industry as well as in robotics, drones, UAV, UAS, academic researches, and other highly demanding applications such as use in various military projects,..


Technical Details:
Voltage (max.) [V]: 8.4

Torque [kg/cm]@6.0V: 7.2
Torque [kg/cm]@7.4V: 9.0
Torque [kg/cm]@8.4V: 10.2

Speed [s/60°]@6.0V: 0.06
Speed [s/60°]@7.4V: 0.05
Speed [s/60°]@8.4V: 0.04

Width [mm]: 15.0
Length [mm]: 35.5
Height [mm]: 32.5

Weight [g]: 40.0

Motor typ: Coreless
Working Frequency: 760us/560Hz, 450us-1050us
Resolution: <2us
Gear: Hardened Steel
Ball Bearing: 2BB
Output shaft type: 25T
Servo size: Mini
Waterproof: No
Manufacturer: KST


Suitable for use as s Tail Servo on 320-580 size RC Helicopters;

Such as Goblin 380 420, 500, KRAKEN 580, T-REX 450PRO DFC, 450L, 470, 500, Mikado LOGO 480, 500, OXY 5, and similar,..


79.30€  Inc Tax
Servo KST A15-1810 HV 20kg/cm (8.4V) - Aircraft Servo (KSTA15-1810)

KST A15-1810 HV Digital Coreless Servo Motor (Phosphor Bronze + Hardened Steel Gears)

The KST A15-1810 HV Coreless servo offers a significantly longer life-span, with a superior power to weight ratio. The servo features a nicely machined aluminium case for superior cooling and offerers high voltage capability. It can be run directly from a 2S LiPo battery without the need for a separate voltage regulator.

Built-in anti-lock circuit prevents the electronics from burning out if a linkage or control surface becomes locked (Servo tested locked after 5 minutes in perfect working condition).

Another huge benefit of A15 servos is the all new design of a circuit board that generates no counter EMF in any working conditions. That eliminates any possible interference with your electronics system and receiver unit thus as a result giving you only the best in-flight performance (servo tested for 10 hours continuous operation without any interference).

Due to the extreme reliability and performance with very fast positioning times and great accuracy this servos are used in Aircraft RC models as well as in film and motion picture industry in robotics, drones, UAV, UAS, academic researches, and other highly demanding applications such as use in various military projects,..

KST = Fast, powerful and reliable!

Features
- Coreless motor
- Phosphor Bronze + Hardened Steel Gears
- Dual ball bearing
- Relatively low weight


Technical Details:

Voltage (max.) [V]: 8.4

Torque [kg/cm]@6.0V: 15.0
Torque [kg/cm]@7.4V: 18.0
Torque [kg/cm]@8.4V: 20.0

Speed [s/60°]@6.0V: 0.14
Speed [s/60°]@7.4V: 0.12
Speed [s/60°]@8.4V: 0.10

Width [mm]: 15.0
Length [mm]: 35.5
Height [mm]: 32.5

Weight [g]: 42.0

Motor type: Coreless
Working Frequency: 1520us/333Hz, 900us-2100us
Resolution: <2us
Gear: Phosphor Bronze + Hardened Steel Gear
Ball Bearing: 2BB
Output shaft type: 25T
Servo size: Mini
Waterproof: No
Manufacturer: KST


89.06€  Inc Tax
Servo KST A15-2212 HV 25kg/cm (8.4V) - Aircraft Servo (KSTA15-2212)

KST A15-2212 HV Digital Coreless Servo Motor (Phosphor Bronze + Hardened Steel Gears)

The KST A15-2212 HV Coreless servo offers a significantly longer life-span, with a superior power to weight ratio. The servo features a nicely machined aluminium case for superior cooling and offerers high voltage capability. It can be run directly from a 2S LiPo battery without the need for a separate voltage regulator.

Built-in anti-lock circuit prevents the electronics from burning out if a linkage or control surface becomes locked (Servo tested locked after 5 minutes in perfect working condition).

Another huge benefit of A15 servos is the all new design of a circuit board that generates no counter EMF in any working conditions. That eliminates any possible interference with your electronics system and receiver unit thus as a result giving you only the best in-flight performance (servo tested for 10 hours continuous operation without any interference).

Due to the extreme reliability and performance with very fast positioning times and great accuracy this servos are used in Aircraft RC models as well as in film and motion picture industry in robotics, drones, UAV, UAS, academic researches, and other highly demanding applications such as use in various military projects,..

KST = Fast, powerful and reliable!

Features
- Coreless motor
- Phosphor Bronze + Hardened Steel Gears
- Dual ball bearing
- Relatively low weight


Technical Details:

Voltage (max.) [V]: 8.4

Torque [kg/cm]@6.0V: 18.0
Torque [kg/cm]@7.4V: 22.0
Torque [kg/cm]@8.4V: 25.0

Speed [s/60°]@6.0V: 0.15
Speed [s/60°]@7.4V: 0.12
Speed [s/60°]@8.4V: 0.11

Width [mm]: 15.0
Length [mm]: 40.5
Height [mm]: 34.0

Weight [g]: 52.0

Motor type: Coreless
Working Frequency: 1520us/333Hz, 900us-2100us
Resolution: <2us
Gear: Phosphor Bronze + Hardened Steel Gear
Ball Bearing: 2BB
Output shaft type: 25T
Servo size: Mini
Waterproof: No
Manufacturer: KST


94.55€  Inc Tax
Servo KST DS215MG V3 3.7kg/cm (7.4V) (KSTDS215MG)

KST DS215MG v3 Digital Coreless Servo Motor (metal gear)

The KST DS215MG v3 features nicely machined fully aluminium housing with all metal gears.

Due to extreme reliability and performance KST servos are used in film and motion picture industry as well as in robotics, drones, UAV, UAS, academic researches, and in the other highly demanding applications such as use in various military projects, etc.,..

Technical Details:
Voltage (max.) [V]: 7.4

Torque [kg/cm]@6.0V: 3.1
Torque [kg/cm]@7.4V: 3.7
Torque [kg/cm]@8.4V: /

Speed [s/60°]@6.0V: 0.06
Speed [s/60°]@7.4V: 0.05
Speed [s/60°]@8.4V: /

Width [mm]: 12.0
Length [mm]: 23.0
Height [mm]: 27.5

Weight [g]: 20.0

Motor typ: Coreless
Working Frequency: 1520us/333Hz, 800us-2200us
Gear: Metal Gear
Ball Bearing: 2BB
Output shaft type: 25T
Servo size: Micro
Waterproof: No
Manufacturer: KST


Suitable for Swashplate use on 250-470 size RC helicopters;

Such as Oxy 3, Goblin 280 Fireball, 380, 420, T-REX 250, 300, 450, 470, MSH PROTOS 380, and similars,..


33.55€  Inc Tax
Per Page      1 - 30 of 36