Switches, Cables and Connectors

Hitec Heavy Duty Switch Harness

Muldental Elektronik Highly flexible 0,50 mm2 silicone power cable with red electrical insulation.

Stranded wire from 270 strands 0.05 mm
Outer diameter: 1.5 mm
Max voltage: 48 V
Continuous current load: 7.5A
Peak current (5min): 20.5A

Made in Germany

Muldental Elektronik Highly flexible 0,50 mm2 silicone power cable with black electrical insulation.

Stranded wire from 270 strands 0.05 mm
Outer diameter: 1.5 mm
Max voltage: 48 V
Continuous current load: 7.5A
Peak current (5min): 20.5A

Made in Germany

Muldental Elektronik Highly flexible 0,50 mm2 silicone power cable with black electrical insulation.

Stranded wire from 516 strands 0.05 mm
Outer diameter: 2.3 mm
Max voltage: 48 V
Continuous current load: 18.2A
Peak current (5min): 31.3A

Made in Germany

Muldental Elektronik Highly flexible 4.00 mm2 silicone power cable with red electrical insulation.

Stranded wire from 1020 strands 0.07 mm
Outer diameter: 4.2 mm
Max voltage: 48 V
Continuous current load: 42.5A
Peak current (5min): 73.2A

Made in Germany

Muldental Elektronik Highly flexible 4.00 mm2 silicone power cable with black electrical insulation.

Stranded wire from 1020 strands 0.07 mm
Outer diameter: 4.2 mm
Max voltage: 48 V
Continuous current load: 42.5A
Peak current (5min): 73.2A

Made in Germany

Glow Clip Charging Cable with 4mm banana connectors

Graupner ON/OFF Switch with leads

Digital voltage meter for 2-8 cell LiPo, LiFe, Li-ion batteries with adjustable low voltage audible signal (buzzer/alarm) (2.70-3.80V). Also offers 4-15 V voltage measurement for NiXX batteries.

Muldental Elektronik Highly flexible 6.00 mm2 silicone power cable with red electrical insulation.

Stranded wire from 1260 strands 0.1 mm
Outer diameter: 6.5 mm
Max voltage: 48 V
Continuous current load: 73A
Peak current (5min): 126A

Made in Germany

Konect Maxi On/Off Switch with (XT60/JR/Graupner cable)

Flat Y-lead servo extension cable (150mm)

Flat Y-cable cable with JR connectors

Charging Adapter Cable for Futaba/BEC/Glow (igniter) with Deans (T-plug) connector

SkyRC Dual Charging (Port) Balancer Board with XH adapter

Specification:
Cell: 2-8S LiPo
Connector: XT60 for battery / XH balance ports
Fuse: 2x 40A

Gold-plated connector G8.0mm with segmented elastic pin with max. load 170A (long-term 80A)

For cables up to 13.3 mm2 (6 AWG)
Transition resistance 0.15 mOhm, max. 500 V

Packing: 1 pair

Two-pin power connector with gold-plated contacts with max. load capacity of 30A.

For cables with a cross-section of max. 0.8 mm2 (18 AWG)
Transition resistance 0.65 mOhm, max. 500V

Packaging: 10 pcs

SkyRC XT60 charging cable for LiPo battery with EC5 connector

XT60 (female) and EC5 (male)

SkyRC XT60 charging cable for LiPo battery with EC3 connector

XT60 (female) and EC3 (male)

Konect 4mm gold (Banana) charging cable for battery with Traxxas connector - 150mm

4mm Gold Connectors (male) and Traxxas (male)

Servo connector - suitable for FUT / Futaba

Package: 1 piece crimp connector (female)

Use for radio controlled (RC) airplanes, helicopters, cars, trucks, buggies, boats and other models.

Servo connector - suitable for JR / Graupner

Package: 1 piece crimp connector (female)

Use for radio controlled (RC) airplanes, helicopters, cars, trucks, buggies, boats and other models.

Servo connector - suitable for FUT / Futaba

Package: 1 piece crimp connector (male)

Use for radio controlled (RC) airplanes, helicopters, cars, trucks, buggies, boats and other models.

MPX 8-pin high current connector

Package: 1 pair

High quality MPX 8-pin connector with gold-plated solder contacts.

Current rating:

• 6A / 24h
• 8A / 5min
• 10A / 3s

Use for quick wing assembly or attach to the fuselage for quick servo connection with the wings in radio controlled (RC) airplanes, helicopters, cars, trucks, buggies, boats and other models. It can be used together with solder board for easy wiring (8GR71294-1).

PCB for MPX 8-pin high current connector

Package: 1 piece

High quality double-sided PCB for MPX 8-pin connector. For soldering of servo extension cables and their mechanical securing.

Use for quick wing assembly or attach to the fuselage for quick servo connection with the wings in radio controlled (RC) airplanes, helicopters, cars, trucks, buggies, boats and other models. It can be used together with the MPX 8-pin connector (1M71285).

Jamara Crimp Pliers

Terminal Crimper for servo connector leads: AWG 28-14
Tool lenght: 170mm

Use this tool for radio controlled (RC) airplanes, helicopters, cars, trucks, buggies, boats and other models. For servo connection lead assembly.

Servo Extension Cable

Length: 300mm

Flat Extension cable with JR connectors (0.25mm2)


Use for radio controlled (RC) airplanes, helicopters, cars, trucks, buggies, boats and other models.

Heat Shrink Tube 8mm

Red and black
Length: 25cm each

With the Graupner Micro-USB OTG cable you can connect and transfer data between any compatible Android Smartphone when using the Graupner HoTT viewer (available on Google Play store).

The cable connects the mz-12 PRO, mz-16, mz-32, mc-26 and mc-28 radios to the Android Smartphone without the need for a Bluetooth device.

This cable is an excellent addition when using the Smartphone holder to connect the phone and radio.


Use this accessory for radio controlled (RC) airplanes, helicopters, drones and other models.

Two-pin power connector with gold-plated contacts

Packaging: 10 pcs

Use this connectors for radio controlled (RC) airplanes, helicopters, cars, trucks, buggies, boats and other models

Two-pin power connector with gold-plated contacts

Packaging: XT90 male conncectors / 10 pieces

Use this connectors for radio controlled (RC) airplanes, helicopters, cars, trucks, buggies, boats and other models