Chargers & Power Supplies

Sort By:  
Graupner XH-Balance Charger 3-4S LiPo (GR3S4SBAL)
Graupner XH-Balance Charger 3-4S LiPo

Microprocessor controlled charger with integrated balancer for lithium batteries (LiPo, LiIo).

7-segment LED voltage and charge status indicator
For LiPo batteries with 3-4 cells and XH balancer connector
Charging power: approx. 40 W
Charging current: max. 3 A
Weight: 135 g
Automatic test and detection of batterie cells

Technical data:

Connector: XH
Width [mm]: 60
Height [mm]: 26
Weight [g]: 135
Max. charging current [A]: 3
Number of LiPo, Lilo cells: 3 - 4
Length [mm]: 98
AC input voltage [V]: 100 ... 240 V AC
Dimensions: [LxWxH in mm]: 98 x 60 x 26
Max. charging power [W]: 40

Use this 3-4S LiPo battery Balance Charger for radio controlled (RC) model airplanes, helicopters, cars, trucks, buggies, boats and other Lipo batteries.

14.64€  Inc Tax
SkyRC eFuel 380W 16A 24V Power Supply (SK200023)
SkyRC eFuel 380W 16A 24V Power Supply Unit

Built for most demanding pocket charger 
Converts standard household power 100-240V AC to 24V DC power and supply up to 16 amperes of continuous power.

Safer and Reliable
  • Short-circuit protection on output
  • Over Current Protection
  • Over Temperature Protection
  • Over Load Protection
  • Over Voltage Protection

Active PFC
Active PFC is the use of power electronics to change the waveform of current drawn by a load to improve the power factor, thus achieving the purpose of higher efficiency. Active PFC, which is integrated into SkyRC 380W/16A regulated power supply, can provide higher power utilization.

Intelligent Air Cooling System
Adopting the cooling system, the fan will be initiated automatically when operating temperature reaches 50 degree.

Overload/Error Indication
The LED indicator turn red whenever equipment connected to the Power Supply is drawing more power than it can provide. The Power Supply may shut down turning off its output in order to protect its circuitry from damage.

Rigorous testing, derived from the pursuit of quality
Each 380W power supply must experience dozens of more than the industry standard of critical testing. Each rigorous testing and every detailing are the reflections of SkyRC's concentration on products.

Specification 
Converts standard household power 100-240V AC to 24V DC power and supply up to 16 amperes of continuous power.

Size and Weight
Case Size:165x139x59.5mm
Weight:1.11kg

Power Supply
Voltage:100-240V
Input AC Frequency:50-60Hz
Output Current:16A
Output Voltage:24V DC±0.5V
Output Voltage Ripple:<300mV
Power Efficiency:88%
Power Factor:>0.98

Protection
Current Overload Protection:17A ±1A
Over Temperature Protection:<80℃
Cooling Method: Cooling Fan 
Operating Temperature:0-40℃
Operating Humidity:0-90%


89.06€  Inc Tax
SkyRC Dual Charging (Port) Balancer Board with XH adaptor (SK600071)
SkyRC Dual Charging (Port) Balancer Board with XH adapter

Specification:
Cell: 2-8S LiPo
Connector: XT60 for battery / XH balance ports
Fuse: 2x 40A

25.01€  Inc Tax
SkyRC e3 LiPo (2-3s) Balance Charger (SK100081)
SkyRC e3 LiPo (2-3s) Balance Charger

SkyRC e3 AC balance charger is designed for 2‐3s LiPo battery. Its simpliness and low‐cost make it not only popular in RC world but also find its place in airsoft market.

Specifications
AC Input: 100-240V
Battery Type: LiPo
Cell Count: 2-3 cells
Charge Current: 1.2A
Circuit Power: 11W
Weight: 103g

Size
Length: 88mm
Width: 57mm
Height: 35mm

18.30€  Inc Tax
Graupner XH-Balance Charger 2-3S LiPo (GR6454.XH)
Graupner XH-Balance Charger 2-3S LiPo

Use this 2-3S LiPo battery Balance Charger for radio controlled (RC) model airplanes, helicopters, cars, trucks, buggies, boats and other Lipo batteries.

9.76€  Inc Tax
SkyRC Temperature Sensor for SkyRC Charger (SK600040)
SkyRC Temperature Sensor for SkyRC Charger

9.76€  Inc Tax
Per Page      1 - 6 of 6
  • 1