Flybarless Systems

Sort By:  
BEASTX Microbeast BLE2SYS Bluetooth Smart Interface (BXA76404)

Make your MICROBEAST PLUS even smarter!

BLE2SYS is a Bluetooth Smart Interface that allows to connect your MICROBEAST PLUS / MICROBEAST PLUS HD to your smartphone or tablet. With the StudioXm app (available for Android and iOS) you can easily configure the system, create backups of your settings, load heli presets, upload firmware update files to your unit and much more. Please note that your mobile device must be Bluetooth Smart/Bluetooth LE compatible.

Features

Dimension: 42,5x16x4,5 mm
Weight: 2,9 grams

Package content

• 1x BLE2SYS
• 1x wire with JR male plug (10cm)


39.65€  Inc Tax
MICROBEAST PLUS Flybarless System (BXM76400)

MICROBEAST Plus is a 3-axis control system for flybarless RC model helicopters. MEMS sensors of the latest generation measure the aircrafts rotational movement with unprecedented precision and transmit the data digitally and in real time to the system.

The housing made of plastic composite material keeps the weight of MICROBEAST Plus sensationally low.

The sophisticated setup can quickly be done everywhere and no expensive programming box or computer is needed. So many settings can also be changed simply and easily at the flying field. 

Further options are available with the optional USB2SYS interface and the StudioX software package. MICROBEAST Plus can be kept up to date by using the update functionality and advanced pilot can thus customize the unit specifically to their needs.

The device can be upgraded to ProEdition firmware with AttitudeControl (Bail out rescue function) at any time (subject to a charge).

Features

Servo outputs

• 3 swash plate servos
- Maximum adjustable servo update rate: 200Hz
- Swash plate mixing types: mCCPM, 90°, 120°, 135°, 140°; as well es freely configurable mixer with StudioX, i.e. for swash phasing
• 1 rudder servo 
- Supports mostly all types of servos with 1520µs, 960µs or 760µs
- Maximum adjustable servo update rate: 560Hz
• When using a SingleLine receiver additionally:
- throttle output, auxiliary output for landing gear, position lights or else

Signal inputs

• Standard receiver with single servo output channels
• SingleLine receivers: Spektrum DSM2/DSMX remote satellite, JR RJ01 DMSS remote satellite, Futaba S.Bus, SRXL (JR XBUS, Spektrum SRXL, SUMD, M-Link, BEASTX SRXL, JETI UDI), SPPM
• Sensor board (i. e. for connecting a rpm sensor for internal electric or nitro RPM governor function).

Specifications
Input voltage: 3,5 V - 8,5 V DC (Operation with 2 cell LiPo possible)
Processor: 32 Bit ARM
Sensor: 6-Axis MEMS (Gyro + Accelerometer)
Dimensions: 36 x 25 x 14 mm
Weight (w/o wiring): ca. 11g

Content
• MICROBEAST Plus
• Receiver connection cables
• 3M adhesive pads
• Adjustment tool
• Quick start manual poster
• Plastic quick reference card
• Sticker set


Optional accessories
• USB2SYS Interface for communication with StudioX PC Software (BXA76007)
• BLE2SYS Bluetooth-Interface (BXA76015)

Current Firmware

Additional to the basic functionality as flybarless system and tail gyro* an internal RPM Governor function* for helicopters with electric or combustion drive is included.

* Requires the optional Tail-Gyro Adaptor (BXA76001)
** Requires the optional Brushless Sensor and RPM-Sensor Adaptorcable (BXA76402) for Electro or Governor Sensor for fuel engines (HEGBP001)


139.08€  Inc Tax
BEASTX USB-Interface for Microbeast (BXA76007)

USB-Interface for

• MICROBEAST
• MICROBEAST PLUS
• SPEKTRUM AR7200BX
• SPEKTRUM AR7300BX
• SPEKTRUM AR7210BX

You can download the StudioX Software for PC and Mac on the BeastX Website for free.

Content

- USB2SYS
- patch cable 1.8m

22.57€  Inc Tax
Tail-Gyro adapter cable - MICROBEAST (BXA76001)

With this optional adapter cable, MICROBEAST can also be utilized solely as a tail gyro. This is recommended especially for whoever is switching from the conventional paddle system and wants to slowly approach the RIGID operation with the 3-axis solution (3G-Gyro Mode). 

Length: 25cm


4.27€  Inc Tax
Brushless RPM Sensor with adaptor - MICROBEAST PLUS (BXA76402)

Features:

- Universal RPM sensor for most of the FBL and telemetry systems.
- Ideal for using the governor function in the MICROBEAST PLUS and MICROBEAST PLUS HD.
- High resolution, even at low speeds.

Technical data:

Operating voltage: 3.5V - 15.0V DC
Current consumption: max. 1.5mA
Sensor input voltage: Phase1, Phase2: 6V - 60V / cells: 2S - 14S
Max. Engine speed: 240 000 rpm
Dimensions: 22x8x6.5mm
Weight: 2g

Box Content:

- Brushless RPM sensor
- Sensor connection cable


(Pictured MICROBEAST PLUS HD not included!)


17.08€  Inc Tax
Governor Sensor MICROBEAST Plus (HEGBP001)

• Suitable for T-REX 600N / T-REX 700N
• Must use with:

- BEASTX MICROBEAST Plus Flybarless System


Content

• 1x Beastx Governor Sensor (255mm/6pin connector)
• 2x RPM Magnet (4x1.6mm)


9.76€  Inc Tax
MICROBEAST PLUS HD Flybarless System (BXM76500)

MICROBEAST PLUS is a 3-axis control system for flybarless RC model helicopters. MEMS sensors of the latest generation measure the aircraft′s rotational movement with unprecedented precision and transmit the data digitally and in real time to the system.

MICROBEAST PLUS HD has a housing in aluminum composite construction and a switchable high power input to meet the requirements of large RC helicopters (550 size and bigger helicopters that use standard size servos) in terms of providing a stable power supply.

The sophisticated setup can quickly be done everywhere and no expensive programming box or computer is needed. So many settings can also be changed simply and easily at the flying field. 

Further options are available with the optional USB2SYS interface and the StudioX software package. MICROBEAST PLUS can be kept up to date by using the update functionality and advanced pilot can thus customize the unit specifically to their needs.

Current Firmware : Additional to the basic functionality as flybarless system and tail gyro an internal RPM Governor function for helicopters with electric or combustion drive is included.

The device can be upgraded to ProEdition firmware with AttitudeControl (Bail out rescue function) at any time (subject to a charge).

Technical data:

Input voltage: 3,5 V - 8,5 V DC (Operation with 2 cell LiPo possible)
Processor: 32 Bit ARM
Sensor: 6-Axis MEMS (Gyro + Accelerometer)
Dimensions: 36 x 25 x 14 mm
Weight (w/o wiring): ca. 11g

Features:

Requires a radio system with at least 6 output channels (5 control functions + throttle).

Servo outputs:

• 3 swash plate servos
Maximum adjustable servo update rate: 200Hz
Swash plate mixing types: mCCPM, 90°, 120°, 135°, 140° as well es freely configurable mixer with StudioX, i.e. for swash phasing
• 1 rudder servo 
Supports mostly all types of servos with 1520µs, 960µs or 760µs
Maximum adjustable servo update rate: 560Hz
• When using a SingleLine receiver additionally:
throttle output, auxiliary output for landing gear, position lights or else

Signal inputs:

• Standard receiver with single servo output channels
• SingleLine receivers: Spektrum DSM2/DSMX remote satellite*, JR RJ01 DMSS remote satellite*, Futaba S.Bus, SRXL (JR XBUS, Spektrum SRXL, SUMD, M-Link, BEASTX SRXL, JETI UDI), SPPM
• Sensor board (i. e. for connecting a rpm sensor for internal electric or nitro RPM governor function).

* only with Spektrum remote satellite adapter 

High power input:

• well proven electronic switch system
• allows to connect power wires with large diameter between receiver battery/BEC and flybarless system

Box contents:

• MICROBEAST PLUS HD
• Switch harness
• Power cable
• Receiver connection cables
• 3M adhesive pads
• Adjustment tool
• Quick start manual poster
• Plastic quick reference card
• Sticker set

Optional accessories:

• USB2SYS Interface for communication with StudioX PC Software
• Spektrum remote satellite adapter


159.82€  Inc Tax
BEASTX NANOBEAST Flybarless System (BXM76900)

The NANOBEAST is a control unit for small and smallest RC model helicopters without auxiliary rotor level (FBL/flybarless). The integrated gyroscopic elements stabilize the helicopter as much as possible so that it follows only the control commands of the pilot. The steering feel can be adjusted from tame to extremely agile. Thus, the model meets almost all requirements of pilots, no matter if beginner or 3D professional. Through a paid firmware upgrade, the system can be extended to "ProEdition". 

This offers additional functions such as the AttitudeControl for position stabilization and rescue of the model in unsafe attitude, as well as a bank switching, which allows to switch between different parameter sets in flight.

For basic setting and tuning of the system a computer (Windows / mac), a smartphone or tablet (iOS / Android) with Bluetooth LE is required. Depending on the technology used, you will still need a USB2SYS (for computer) or BLE2SYS (for smartphone / tablet) interface.

This is not included and must be purchased separately! The configuration then takes place via the StudioX software, which is offered for free download.

Supported Receiver

Types / Transmission Protocols • SRXL: JR® XBus (Mode B), Multiplex® SRXL (V1 + V2), Jeti® UDI, Graupner / SJ® HOTT SUMD, Spectrum® SRXL 

• Futaba® SBUS
• Single Satellite (Spektrum® DSM2 / DSMX , JR® RJ-01 DMSS)
• Jeti® EXBUS
• ALIGN / FlySky iBus
• PPM sum signal (SPPM)

Technical specifications

Receiver connections: Spektrum® / JR® single satellite, sum signal connector for Graupner® HOTT, Futaba® SBus, Jeti® exBus, FlySky® iBus, FrSky® SRXL, Multiplex® SRXL, JR® XBus (B), Spectrum® SRXL, Align® iBus, SPPM total signal

Input voltage: 4.8V to 6.0V
Recommended helicopter size: 180's - 250's Electroheli
Dimensions: 32x20x10mm
Weight: 5.8g

Box Content:

• 1x NANOBEAST control unit
• 1x patch cable for total signal receiver
• 2x adhesive pad
• 1x manual
• 1x decal sheet


89.67€  Inc Tax
Per Page      1 - 8 of 8
  • 1