Slovenščina RC Electronics
Kyosho SYNCRO KT231P+ (TX) Surface Transmitter + KR331 (RX) 3-channel Surface Receiver
Key Features
- Case design offers better strain relief on antenna lead
- DSMX with DSM2 Backward compatibility*
- 22ms and 11ms Compatible
- Upgrade for any Spektrum receiver with available remote receiver ports
- Great addition to AR636, AR7350, AR9350, Telemetry Receivers and PowerSafe receivers
- Includes 24 inch extension
Repositionable Antenna
This antenna design allows for easy repositioning with the option to exit the case from the side or top. It also offers added strain relief to the antenna wire, and is optimized to fit into the tightest of Remote control aircraft.
Overview
The next generation of Spektrum remote receivers are here with the SPM9745 and SPM9746 Receivers. Featuring a user friendly antenna setup that allows for the antenna to be placed in 2 positions, making installation into those tight projects easier than ever. Fully compatible with DSMX and DSM2 Transmitters*. Use these to add more receiving points on any Spektrum receiver that has 1 or more Remote receiver ports.
The remote receiver includes one 24-inch extension; however, various lengths of receiver extensions can be purchased allowing various placement options for mounting purposes. Additional remote receiver extensions are available in 6", 9", 12", 24" and 36" lengths.
*DSMX Remote Receivers must be used with a DSMX Main Receiver.
KST X15-755X HV Digital Coreless Servo Motor (metal gear)
The KST X15-755X HV Brushless servo offers a significantly longer life-span, with a superior power to weight ratio. The servo features a nicely machined aluminium case and offerers high voltage capability. It can be run directly from a 2S LiPo battery without the need for a separate voltage regulator.
Another great benefit of X15 servos is the all new design of a circuit board that generates no counter EMF in any working conditions. It eliminates any possible interference with your flybarless system or receiver unit thus as a result giving you only the best in-flight performance.
Due to the extreme reliability and performance this servos are used in film and motion picture industry as well as in robotics, drones, UAV, UAS, academic researches, and other highly demanding applications such as use in various military projects,..
Technical Details:
Voltage (max.) [V]: 8.4
Torque [kg/cm]@6.0V: 7.2
Torque [kg/cm]@7.4V: 9.0
Torque [kg/cm]@8.4V: 10.2
Speed [s/60°]@6.0V: 0.06
Speed [s/60°]@7.4V: 0.05
Speed [s/60°]@8.4V: 0.04
Width [mm]: 15.0
Length [mm]: 35.5
Height [mm]: 32.5
Weight [g]: 40.0
Motor typ: Coreless
Working Frequency: 760us/560Hz, 450us-1050us
Resolution: <2us
Gear: Hardened Steel
Ball Bearing: 2BB
Output shaft type: 25T
Servo size: Mini
Waterproof: No
Manufacturer: KST
Suitable for use as s Tail Servo on 320-580 size RC Helicopters;
Such as Goblin 380 420, 500, KRAKEN 580, T-REX 450PRO DFC, 450L, 470, 500, Mikado LOGO 480, 500, OXY 5, and similar,..
KST X12-508 HV Digital Coreless Servo Motor (metal gear)
The KST X12-508 HV Brushless servo offers a significantly longer life-span, with a superior power to weight ratio. The servo features a nicely machined aluminium case and offerers high voltage capability. It can be run directly from a 2S LiPo battery without the need for a separate voltage regulator.
Another great benefit of X12 servos is the all new design of a circuit board that generates no counter EMF in any working conditions. It eliminates any possible interference with your flybarless system or receiver unit thus as a result giving you only the best in-flight performance.
Due to the extreme reliability and performance this servos are used in film and motion picture industry as well as in robotics, drones, UAV, UAS, academic researches, and other highly demanding applications such as use in various military projects,..
Technical Details:
Voltage (max.) [V]: 8.4
Torque [kg/cm]@6.0V: 4.2
Torque [kg/cm]@7.4V: 5.2
Torque [kg/cm]@8.4V: 6.2
Speed [s/60°]@6.0V: 0.09
Speed [s/60°]@7.4V: 0.08
Speed [s/60°]@8.4V: 0.07
Width [mm]: 12.0
Length [mm]: 23.0
Height [mm]: 27.5
Weight [g]: 20.0
Motor typ: Coreless
Working Frequency: 1520us/333Hz, 900us-2100us
Resolution: <2us
Gear: Metal Gear
Ball Bearing: 2BB
Output shaft type: 25T
Servo size: Micro
Waterproof: No
Manufacturer: KST
Suitable for Swashplate use on 250-470 size RC helicopters;
Such as Oxy 3, Goblin 280 Fireball, 380, 420, T-REX 250, 300, 450, 470, MSH PROTOS 380, and similars,..
This multifunction program box is for programming HobbyWing brushless ESCs. Its friendly LCD interface makes ESC programming easy and quick. With a PC, you can upgrade ESC firmware and further adjust ESC parameters online. Besides, it’s compact, portable and very applicable for field use.
This multifunction LCD program box is applicable for the following HobbyWing products:
Platinum series of brushless aircraft ESCs, XeRun series &EzRun series of brushless car ESCs, Seaking Pro series of brushless boat ESCs
Specifications
Size：91x51x17mm（LxWxH）
Weight：65g
Input Voltage: 4.5V—12.6V (a separate battery is needed for powering this program box when ESC has no built-in/external BEC)
Interface: Micro USB， ESC interface (Futaba plug), Power supply interface (Futaba plug)
Built for most demanding pocket charger
Converts standard household power 100-240V AC to 24V DC power and supply up to 16 amperes of continuous power.
Safer and Reliable
- Short-circuit protection on output
- Over Current Protection
- Over Temperature Protection
- Over Load Protection
- Over Voltage Protection
Active PFC
Active PFC is the use of power electronics to change the waveform of current drawn by a load to improve the power factor, thus achieving the purpose of higher efficiency. Active PFC, which is integrated into SkyRC 380W/16A regulated power supply, can provide higher power utilization.
Intelligent Air Cooling System
Adopting the cooling system, the fan will be initiated automatically when operating temperature reaches 50 degree.
Overload/Error Indication
The LED indicator turn red whenever equipment connected to the Power Supply is drawing more power than it can provide. The Power Supply may shut down turning off its output in order to protect its circuitry from damage.
Rigorous testing, derived from the pursuit of quality
Each 380W power supply must experience dozens of more than the industry standard of critical testing. Each rigorous testing and every detailing are the reflections of SkyRC's concentration on products.
Specification
Converts standard household power 100-240V AC to 24V DC power and supply up to 16 amperes of continuous power.
Size and Weight
Case Size：165x139x59.5mm
Weight：1.11kg
Power Supply
Voltage：100-240V
Input AC Frequency：50-60Hz
Output Current：16A
Output Voltage：24V DC±0.5V
Output Voltage Ripple：<300mV
Power Efficiency：88%
Power Factor：>0.98
Protection
Current Overload Protection：17A ±1A
Over Temperature Protection：<80℃
Cooling Method: Cooling Fan
Operating Temperature：0-40℃
Operating Humidity：0-90%
RPM sensor for backplate installation on 40- to 90-sized glow engines
Bolt-on installation with nothing else to install, picks up the rotation of the crankshaft through the backplate
Compatible with Spektrum™ telemetry modules
Has a micro JST connector and plugs into the TM1000 telemetry module
TM1000 AND/OR a Telemetry Capable Transmitter required
Easy installation
Telemetry Capable Receiver or Module and Telemetry capable DSMR/DSMX Transmitter required
FOXY brushless motors are 14-pole rotary casing electric motors with excellent electrical properties featuring a very sophisticated design and high-end manufacturing. Hardened steel shafts and high-quality bearings ensure a long service life, while the quality of materials used to make the stator on the rotor also guarantees excellent performance at a high efficiency. They are low-speed, high-torque engines that handle large diameter propellers and pitches without the need for gearboxes.
Engine marking system: CxxYY / zzzz
C - brushless motor ("outrunner", "circular")
xx - stator diameter in mm
YY - stator length in mm
zzzz - revolutions per volt (rpm/V), "KV"
The engine set includes:
FOXY G3 C2808-1200 brushless motor with 3.5mm gold-plated connectors, rear and front mounting kit and an instruction manual.
Engine Mounting:
The FOXY G3 C2808-1200 is designed for both front and rear mounting. For front mounting at the front of the motor use at least two (opposite) or four bolts. The rear mounting kit (mounting cross, tail propeller) is also supplied with the engine.
The marking according to the engine dimensions: C3530; The marking according to the stator dimensions: C2808
Specifications:
No. of (LiXX) cells: 2-4
Motor Kv: 1200 rpm/V
Max power (30s/4S Lipo): 300W
No-load current (2S): 0.9A
Max peak current (30s): 27A
Diameter: 35mm
Length: 30mm
Shaft diameter: 4mm
Weight: 90g
Magnet poles: 14
Motor timing: 15-25deg
Regulator: 35-40A
Application:
Gliders up to: 1200g
Trainers up to: 1000g
Acro planes up to: 850g
3D airplanes up to: 750g
Recommended propellers:
3S: 10X5”
4S: 8X5”
Specification:
Operating Voltage Range: 7.4-11.1V (2-3S)
Number of poles: 14
Shaft Diameter: 5mm
Case Diameter: 28mm
Case Length: 18.7mm
Kv (RPM/V): 2300
Weight (inc. spinner and 2mm connectors): 33.5g
Stranded wire from 270 strands 0.05 mm
Outer diameter: 1.5 mm
Max voltage: 48 V
Continuous current load: 7.5A
Peak current (5min): 20.5A
Made in Germany
Stranded wire from 516 strands 0.05 mm
Outer diameter: 2.3 mm
Max voltage: 48 V
Continuous current load: 18.2A
Peak current (5min): 31.3A
Made in Germany
Stranded wire from 516 strands 0.05 mm
Outer diameter: 2.3 mm
Max voltage: 48 V
Continuous current load: 18.2A
Peak current (5min): 31.3A
Made in Germany
Stranded wire from 1020 strands 0.07 mm
Outer diameter: 4.2 mm
Max voltage: 48 V
Continuous current load: 42.5A
Peak current (5min): 73.2A
Made in Germany
Stranded wire from 1020 strands 0.07 mm
Outer diameter: 4.2 mm
Max voltage: 48 V
Continuous current load: 42.5A
Peak current (5min): 73.2A
Made in Germany
Stranded wire from 1561 strands 0.07 mm
Outer diameter: 4.8 mm
Max voltage: 48 V
Continuous current load: 54.5A
Peak current (5min): 95.3A
Made in Germany
Stranded wire from 1260 strands 0.1 mm
Outer diameter: 6.5 mm
Max voltage: 48 V
Continuous current load: 73A
Peak current (5min): 126A
Made in Germany
Stranded wire from 1260 strands 0.1 mm
Outer diameter: 6.5 mm
Max voltage: 48 V
Continuous current load: 73A
Peak current (5min): 126A
Made in Germany
Flat Extension cable with JR connectors (0.25mm2)
R8EF Receiver:
Channel: 8ch
Operating voltage: 4.9-10V
Operating current: 19-25mA (input voltage 5V)
Size: 48.5x21x11mm
Weight: 7g
Feature: Fail-safe
Section precision: 4096
Signal output: S-BUS, PPM and PWM
Signal mode: Green LED, output 8 channel PWM signal
SBUS/PPM signal mode: Both red and green LED on, CH1 output S-BUS signal, CH2 output PPM signal, CH3 to CH8 output PWM signal (at the same time)
Package Including:
1x R8EF Receiver
2.4GHz T-FHSS Air system
4 Channels + S-BUS
S-BUS2 Port for telemetry
Diversity Dual Antenna
Ultra small design for smaller models
Heat shrink enclosure to reduce weight
Specification:
Modulation: T-FHSS Air
Weight: 4.8g
Voltage: 4.8 - 7.4V
Channels: 4ch + S.Bus2 Port
Dimensions: 18x41.4x9.9mm
Frequency: 2.4GHz
Aerial Length: 2x 150mm
Overview:
This program card is for programming HobbyWing brushless aircraft ESCs.
It works with the following HobbyWing products:
FlyFun series, SkyWalker series, Guard series (discontinued), and Sword series (discontinued) of brushless aircraft.
Note: this program card doesn’t work with Platinum series of brushless aircraft ESCs.
Specifications:
Size：88x58x14mm
Weight : 40g
Input Voltage : 4.8V—6.0V (a separate battery is needed for powering this program box when ESC has no BEC)
