Car Engines

Sort By:  
GM Racing Nitro Bull .21 (3.5cc) Engine with pull start (92604)
GM Racing Nitro Bull .21 (3.5cc) Nitro Engine with pullstarter

It fits most 1/8 scale nitro vehicles such as off-road buggies and truggies.

SPECIFICATIONS
Category: 1/8 buggy and truggy
Displacement [cm^3]: 3,5
Bore [mm]: 16,27
Stroke [mm]: 16,75
Liner: ABC
Crankshaft: SG
Crankcase: GM LC (Longlife Crankcase)
Crankcase Colour: black
Piston: High Precision CNC Machined
Carburetor: GM Slide Carburetor
Power Output: 2,8 PS
Max RPM: 38.000
Weight: 460g

64.66€  Inc Tax
REDS Racing 721 S SCUDERIA GEN2, CERAMIC, DLC - red (REDENBU0024)
721 S SCUDERIA GEN2 BLACK, CERAMIC REAR BEARING, DLC CRANKSHAFT and BACKPLATE

Reds Racing is happy to announce that the new 721 SCUDERIA GEN2 engine is now available. Due to the success of 721 Scuderia GEN1 engine in recent competitions we have decided to maintain the main features unchanged and improve the carburetor with new materials to increase reliability. Furthermore, the new carb features a new double grab screw joint link to facilitate positioning and fitting with the servo link. To satisfy all our customers requests we have decided to release the new Scuderia Gen2 in 2 different color combinations (red or black) to match engines with any bodyshell.

Innovation
REDS is always striving to innovate. This means investment into new core technologies. Drawing from the rich experience gained through competing on the world’s best RC tracks with the best drivers in the world, our goal is to deliver quality products that are built with passion. The new S line does this.

Tech specs
The new 721 S Scuderia features high reliability, tuning stability and great fuel mileage. Combined with specific technical changes in the porting and new materials, this 7 port engine features higher power and better fuel efficiency compared to any REDS engine released from REDS.

High Torque
During testing we found the new engine is able to provide more torque compared to our competitors, making it suitable for both Buggy and Truggy.

Over 9 minutes run time
The 721 S Scuderia has proved to guarantee over 9 minutes runtime in recent competitions and tests thanks to new materials and coatings.

New Carburetor
The GEN2 engine features a new carburetor with new materials to increase reliability and tuning stability, in particular the insulator bushing has been improved with a higher strength material. Furthermore, it features a new double grab screw joint link to facilitate positioning and fitting with the servo link.

SPECIFICATIONS

Category: 1/8 Buggy and Truggy
Displacement [cm^3]: 3,5
Bore [mm]: 16,24
Stroke [mm] 16,8
Inlet ports: 7
Outlet ports: 1
Crankshaft: balanced with low friction DLC Coating
Backplate: aluminum with low friction DLC Coating
Front ball bearing: 7x19x6 rubber seal made in Japan
Rear ball bearing: 14x25,4x6 Swiss made ceramic
Carburetor diameter [mm]: 7.0 stock (6.0, 6.5, 7.5 and 8.0 optional)
Carburetor: VCX2-A aluminum, 2 needles, GEN2
Weight [g]: 345
Fuel consumption: >9:00 min
Engine temperature: 110-130°C (depending on air temperature)
Recommended Glow plug: REDS TS3
Recommended pipe: REDS 2143 + M Manifold or 2143 X-One pipe
Recommended fuel: 25-30% nitro, 8-10% oil
Break-in fuel: 12% oil


419.68€  Inc Tax
REDS Racing 721 S SCUDERIA GEN2, CERAMIC, DLC - black (REDENBU0024C)
721 S SCUDERIA GEN2 BLACK, CERAMIC REAR BEARING, DLC CRANKSHAFT and BACKPLATE

Reds Racing is happy to announce that the new 721 SCUDERIA GEN2 engine is now available. Due to the success of 721 Scuderia GEN1 engine in recent competitions we have decided to maintain the main features unchanged and improve the carburetor with new materials to increase reliability. Furthermore, the new carb features a new double grab screw joint link to facilitate positioning and fitting with the servo link. To satisfy all our customers requests we have decided to release the new Scuderia Gen2 in 2 different color combinations (red or black) to match engines with any bodyshell.

Innovation
REDS is always striving to innovate. This means investment into new core technologies. Drawing from the rich experience gained through competing on the world’s best RC tracks with the best drivers in the world, our goal is to deliver quality products that are built with passion. The new S line does this.

Tech specs
The new 721 S Scuderia features high reliability, tuning stability and great fuel mileage. Combined with specific technical changes in the porting and new materials, this 7 port engine features higher power and better fuel efficiency compared to any REDS engine released from REDS.

High Torque
During testing we found the new engine is able to provide more torque compared to our competitors, making it suitable for both Buggy and Truggy.

Over 9 minutes run time
The 721 S Scuderia has proved to guarantee over 9 minutes runtime in recent competitions and tests thanks to new materials and coatings.

New Carburetor
The GEN2 engine features a new carburetor with new materials to increase reliability and tuning stability, in particular the insulator bushing has been improved with a higher strength material. Furthermore, it features a new double grab screw joint link to facilitate positioning and fitting with the servo link.

SPECIFICATIONS

Category: 1/8 Buggy and Truggy
Displacement [cm^3]: 3,5
Bore [mm]: 16,24
Stroke [mm] 16,8
Inlet ports: 7
Outlet ports: 1
Crankshaft: balanced with low friction DLC Coating
Backplate: aluminum with low friction DLC Coating
Front ball bearing: 7x19x6 rubber seal made in Japan
Rear ball bearing: 14x25,4x6 Swiss made ceramic
Carburetor diameter [mm]: 7.0 stock (6.0, 6.5, 7.5 and 8.0 optional)
Carburetor: VCX2-A aluminum, 2 needles, GEN2
Weight [g]: 345
Fuel consumption: >9:00 min
Engine temperature: 110-130°C (depending on air temperature)
Recommended Glow plug: REDS TS3
Recommended pipe: REDS 2143 + M Manifold or 2143 X-One pipe
Recommended fuel: 25-30% nitro, 8-10% oil
Break-in fuel: 12% oil


419.68€  Inc Tax
PICCO P3TT Off-road Engine .21 (Ceramic bearing, Aluminium carburettor) (PIC9690)

PIC9690 Picco P3TT Off Road engine .21 off road ceramic aluminium carburettor

Picco are proud to introduce the latest addition to their racing engine line-up, the Picco P3TT buggy 3,5cc. Newly designed to improve throttle response and fuel efficiency, this version features a 3+2 port cylinder.

Characterised by a long stroke layout to deliver better power throughout the entire RPM range, it also sports an all new die-casted aluminum double bottom-end adjustment carburettor for finer tuning and a better passage.

Fitted with a Swiss rear ceramic ball bearing, the crankshaft is balanced and filled with a silicone insert.

The rear back plate, now die-casted, has been also re-designed to offer better flow.

The P3TT 3,5cc engine is delivered with a 7,5mm venturi and our P5TH glow-plug.


Specification:

• 5 port hard chromed liner
• Piston CNC machined from billet
• 14mm balanced shaft with silicone insert
• Knife edged lightweight aerodynamic con-rod
• Low CG cooling head
• 14mm ceramic Swiss-made main bearing
• Composite 3-needle slide carburettor
• Displacement: 3,49cc
• Bore: 16,03mm
• Stroke: 17,30mm
• Output: 2,70hp @ 34,000rpm


219.60€  Inc Tax
REDS R5R Racer Buggy 5 ports V 5.0 (REDENBU00025)
Reds Racing new R5R Racer 5.0 is now available.

The new R5R Racer 5.0 has been provided with a brand new one piece cooling head to improve engine cooling and efficiency.

The new engine has been designed with a 5 ports sleeve and crankshaft timing to improve fuel efficiency and drivability and is suitable for both buggy and truggy.

This new engine is equipped with the best technology to improve reliability and guarantee the best performance on all terrains. R5R Racer factory tuned guarantees the same performance as a Pro engine at reasonable price.

Every single engine is hand inspected and compression checked inside REDS Racing headquarters by Mario Rossi to achieve the highest quality standards.

R5R RACER main features: 5 ports sleeve with boosters, HCX Horizontal carburetor, silicon filled and tuned crankshaft, high sealing made in Japan front bearing, Swiss made steel high quality rear bearing.

It is recommendable to match the new engine only with REDS Racing original pipes, manifolds and optional parts. We advise using REDS 2143 or 2104 pipe and REDS S manifold:

- 2104 for a smoother power delivery and more top speed.
- 2143 for more torque and mid range power.

237.90€  Inc Tax
Picco REBEL X .21 Buggy and Truggy Engine with pull start (PIC9665)
The Rebel line is growing!

The new Rebel X.21 is based on the P3 platform, this engine is Race Legal .21 for 1/8th off-road buggy. Thanks to its bullet proof pull starter, the Rebel is the perfect step 2 engine for any RTR buggy.

189.71€  Inc Tax
Picco REBEL XL .24 Monster Engine with pull start (PIC9668)
Picco REBEL XL .24 Engine

The best 4.0cc (.24) engine for your Monster Truck! Easy to start and tune!

Upsized off-road Buggy and Truggy Monster engine with Pullstart offering a massive torque and power. It's non-race legal but with its design for maximum performance and a smooth power delivery with extra vertical ports making it an ideal choice for heavy monster trucks and all-purpose bashing.

-Upsized Monster engine for Buggy and Truggy
-Massive torque and power
-Non-race-legal (.24)
-3 ports sleeve for maximum performance
-Smooth power delivery
-Extra vertical ports for better performance
-Made in Europe

194.59€  Inc Tax
Per Page      1 - 7 of 7
  • 1